Commit 531c633d authored by Bob Moore's avatar Bob Moore Committed by Len Brown

ACPICA: Split out PM1 status registers from the FADT

Add new globals for the PM1 status registers (A/B), similar to the
way the PM1 enable registers are handled. Instead of overloading
the FADT Event Register blocks. This makes the code clearer and
less prone to error.
Signed-off-by: default avatarBob Moore <robert.moore@intel.com>
Signed-off-by: default avatarLin Ming <ming.m.lin@intel.com>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent 6fc69d8b
......@@ -148,9 +148,12 @@ ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list;
ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT;
ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS;
/* These addresses are calculated from FADT address values */
/* These addresses are calculated from the FADT Event Block addresses */
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_status;
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable;
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_status;
ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable;
/*
......
......@@ -72,21 +72,23 @@ acpi_status acpi_hw_clear_acpi_status(void)
ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %04X\n",
ACPI_BITMASK_ALL_FIXED_STATUS,
(u16) acpi_gbl_FADT.xpm1a_event_block.address));
(u16) acpi_gbl_xpm1a_status.address));
lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
/* Clear the fixed events */
status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,
ACPI_BITMASK_ALL_FIXED_STATUS);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Clear the fixed events */
/* Write PM1B register if present */
if (acpi_gbl_FADT.xpm1b_event_block.address) {
if (acpi_gbl_xpm1b_status.address) {
status = acpi_write(ACPI_BITMASK_ALL_FIXED_STATUS,
&acpi_gbl_FADT.xpm1b_event_block);
&acpi_gbl_xpm1b_status);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
......@@ -150,14 +152,14 @@ acpi_hw_register_read(u32 register_id, u32 * return_value)
switch (register_id) {
case ACPI_REGISTER_PM1_STATUS: /* 16-bit access */
status = acpi_read(&value1, &acpi_gbl_FADT.xpm1a_event_block);
status = acpi_read(&value1, &acpi_gbl_xpm1a_status);
if (ACPI_FAILURE(status)) {
goto exit;
}
/* PM1B is optional */
status = acpi_read(&value2, &acpi_gbl_FADT.xpm1b_event_block);
status = acpi_read(&value2, &acpi_gbl_xpm1b_status);
value1 |= value2;
break;
......@@ -267,14 +269,14 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value)
/* Now we can write the data */
status = acpi_write(value, &acpi_gbl_FADT.xpm1a_event_block);
status = acpi_write(value, &acpi_gbl_xpm1a_status);
if (ACPI_FAILURE(status)) {
goto exit;
}
/* PM1B is optional */
status = acpi_write(value, &acpi_gbl_FADT.xpm1b_event_block);
status = acpi_write(value, &acpi_gbl_xpm1b_status);
break;
case ACPI_REGISTER_PM1_ENABLE: /* 16-bit access */
......
......@@ -57,6 +57,8 @@ static void acpi_tb_convert_fadt(void);
static void acpi_tb_validate_fadt(void);
static void acpi_tb_setup_fadt_registers(void);
/* Table for conversion of FADT to common internal format and FADT validation */
typedef struct acpi_fadt_info {
......@@ -132,6 +134,35 @@ static struct acpi_fadt_info fadt_info_table[] = {
#define ACPI_FADT_INFO_ENTRIES (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))
/* Table used to split Event Blocks into separate status/enable registers */
typedef struct acpi_fadt_pm_info {
struct acpi_generic_address *target;
u8 source;
u8 register_num;
} acpi_fadt_pm_info;
static struct acpi_fadt_pm_info fadt_pm_info_table[] = {
{&acpi_gbl_xpm1a_status,
ACPI_FADT_OFFSET(xpm1a_event_block),
0},
{&acpi_gbl_xpm1a_enable,
ACPI_FADT_OFFSET(xpm1a_event_block),
1},
{&acpi_gbl_xpm1b_status,
ACPI_FADT_OFFSET(xpm1b_event_block),
0},
{&acpi_gbl_xpm1b_enable,
ACPI_FADT_OFFSET(xpm1b_event_block),
1}
};
#define ACPI_FADT_PM_INFO_ENTRIES (sizeof (fadt_pm_info_table) / sizeof (struct acpi_fadt_pm_info))
/*******************************************************************************
*
* FUNCTION: acpi_tb_init_generic_address
......@@ -207,7 +238,7 @@ void acpi_tb_parse_fadt(u32 table_index)
*/
(void)acpi_tb_verify_checksum(table, length);
/* Obtain a local copy of the FADT in common ACPI 2.0+ format */
/* Create a local copy of the FADT in common ACPI 2.0+ format */
acpi_tb_create_local_fadt(table, length);
......@@ -265,11 +296,17 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
ACPI_MEMCPY(&acpi_gbl_FADT, table,
ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
/*
* 1) Convert the local copy of the FADT to the common internal format
* 2) Validate some of the important values within the FADT
*/
/* Convert the local copy of the FADT to the common internal format */
acpi_tb_convert_fadt();
/* Validate FADT values now, before we make any changes */
acpi_tb_validate_fadt();
/* Initialize the global ACPI register structures */
acpi_tb_setup_fadt_registers();
}
/*******************************************************************************
......@@ -303,8 +340,6 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
static void acpi_tb_convert_fadt(void)
{
u8 pm1_register_bit_width;
u8 pm1_register_byte_width;
struct acpi_generic_address *target64;
u32 i;
......@@ -379,112 +414,6 @@ static void acpi_tb_convert_fadt(void)
address32));
}
}
/* Validate FADT values now, before we make any changes */
acpi_tb_validate_fadt();
/*
* Optionally check all register lengths against the default values and
* update them if they are incorrect.
*/
if (acpi_gbl_use_default_register_widths) {
for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
target64 =
ACPI_ADD_PTR(struct acpi_generic_address,
&acpi_gbl_FADT,
fadt_info_table[i].address64);
/*
* If a valid register (Address != 0) and the (default_length > 0)
* (Not a GPE register), then check the width against the default.
*/
if ((target64->address) &&
(fadt_info_table[i].default_length > 0) &&
(fadt_info_table[i].default_length !=
target64->bit_width)) {
ACPI_WARNING((AE_INFO,
"Invalid length for %s: %d, using default %d",
fadt_info_table[i].name,
target64->bit_width,
fadt_info_table[i].
default_length));
/* Incorrect size, set width to the default */
target64->bit_width =
fadt_info_table[i].default_length;
}
}
}
/*
* Get the length of the individual PM1 registers (enable and status).
* Each register is defined to be (event block length / 2).
*/
pm1_register_bit_width =
(u8)ACPI_DIV_2(acpi_gbl_FADT.xpm1a_event_block.bit_width);
pm1_register_byte_width = (u8)ACPI_DIV_8(pm1_register_bit_width);
/*
* Adjust the lengths of the PM1 Event Blocks so that they can be used to
* access the PM1 status register(s). Use (width / 2)
*/
acpi_gbl_FADT.xpm1a_event_block.bit_width = pm1_register_bit_width;
acpi_gbl_FADT.xpm1b_event_block.bit_width = pm1_register_bit_width;
/*
* Calculate separate GAS structs for the PM1 Enable registers.
* These addresses do not appear (directly) in the FADT, so it is
* useful to calculate them once, here.
*
* The PM event blocks are split into two register blocks, first is the
* PM Status Register block, followed immediately by the PM Enable
* Register block. Each is of length (xpm1x_event_block.bit_width/2).
*
* On various systems the v2 fields (and particularly the bit widths)
* cannot be relied upon, though. Hence resort to using the v1 length
* here (and warn about the inconsistency).
*/
if (acpi_gbl_FADT.xpm1a_event_block.bit_width
!= acpi_gbl_FADT.pm1_event_length * 8)
printk(KERN_WARNING "FADT: "
"X_PM1a_EVT_BLK.bit_width (%u) does not match"
" PM1_EVT_LEN (%u)\n",
acpi_gbl_FADT.xpm1a_event_block.bit_width,
acpi_gbl_FADT.pm1_event_length);
/* The PM1A register block is required */
acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
acpi_gbl_FADT.xpm1a_event_block.space_id,
pm1_register_byte_width,
(acpi_gbl_FADT.xpm1a_event_block.address +
pm1_register_byte_width));
/* Don't forget to copy space_id of the GAS */
acpi_gbl_xpm1a_enable.space_id =
acpi_gbl_FADT.xpm1a_event_block.space_id;
/* The PM1B register block is optional, ignore if not present */
if (acpi_gbl_FADT.xpm1b_event_block.address) {
if (acpi_gbl_FADT.xpm1b_event_block.bit_width
!= acpi_gbl_FADT.pm1_event_length * 8)
printk(KERN_WARNING "FADT: "
"X_PM1b_EVT_BLK.bit_width (%u) does not match"
" PM1_EVT_LEN (%u)\n",
acpi_gbl_FADT.xpm1b_event_block.bit_width,
acpi_gbl_FADT.pm1_event_length);
acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
acpi_gbl_FADT.xpm1b_event_block.space_id,
pm1_register_byte_width,
(acpi_gbl_FADT.xpm1b_event_block.
address + pm1_register_byte_width));
/* Don't forget to copy space_id of the GAS */
acpi_gbl_xpm1b_enable.space_id =
acpi_gbl_FADT.xpm1b_event_block.space_id;
}
}
/******************************************************************************
......@@ -607,3 +536,94 @@ static void acpi_tb_validate_fadt(void)
}
}
}
/******************************************************************************
*
* FUNCTION: acpi_tb_setup_fadt_registers
*
* PARAMETERS: None, uses acpi_gbl_FADT.
*
* RETURN: None
*
* DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally,
* force FADT register definitions to their default lengths.
*
******************************************************************************/
static void acpi_tb_setup_fadt_registers(void)
{
struct acpi_generic_address *target64;
struct acpi_generic_address *source64;
u8 pm1_register_byte_width;
u32 i;
/*
* Optionally check all register lengths against the default values and
* update them if they are incorrect.
*/
if (acpi_gbl_use_default_register_widths) {
for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
target64 =
ACPI_ADD_PTR(struct acpi_generic_address,
&acpi_gbl_FADT,
fadt_info_table[i].address64);
/*
* If a valid register (Address != 0) and the (default_length > 0)
* (Not a GPE register), then check the width against the default.
*/
if ((target64->address) &&
(fadt_info_table[i].default_length > 0) &&
(fadt_info_table[i].default_length !=
target64->bit_width)) {
ACPI_WARNING((AE_INFO,
"Invalid length for %s: %d, using default %d",
fadt_info_table[i].name,
target64->bit_width,
fadt_info_table[i].
default_length));
/* Incorrect size, set width to the default */
target64->bit_width =
fadt_info_table[i].default_length;
}
}
}
/*
* Get the length of the individual PM1 registers (enable and status).
* Each register is defined to be (event block length / 2). Extra divide
* by 8 converts bits to bytes.
*/
pm1_register_byte_width =
(u8)ACPI_DIV_16(acpi_gbl_FADT.xpm1a_event_block.bit_width);
/*
* Calculate separate GAS structs for the PM1x (A/B) Status and Enable
* registers. These addresses do not appear (directly) in the FADT, so it
* is useful to pre-calculate them from the PM1 Event Block definitions.
*
* The PM event blocks are split into two register blocks, first is the
* PM Status Register block, followed immediately by the PM Enable
* Register block. Each is of length (pm1_event_length/2)
*
* Note: The PM1A event block is required by the ACPI specification.
* However, the PM1B event block is optional and is rarely, if ever,
* used.
*/
for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++) {
source64 =
ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
fadt_pm_info_table[i].source);
acpi_tb_init_generic_address(fadt_pm_info_table[i].target,
source64->space_id,
pm1_register_byte_width,
source64->address +
(fadt_pm_info_table[i].
register_num *
pm1_register_byte_width));
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment