Merge branch 'for-2.6.34' into for-2.6.35

Conflicts due to context changes next to the backported DMA data change:
	include/sound/soc.h

include/sound/soc.h

@@ -381,7 +381,7 @@ struct snd_soc_pcm_stream {
 	unsigned int rate_max;		/* max rate */
 	unsigned int channels_min;	/* min channels */
 	unsigned int channels_max;	/* max channels */
-	unsigned int active;		/* num of active users of the stream */
+	unsigned int active;		/* stream is in use */
 	void *dma_data;			/* used by platform code */
 };
 

sound/soc/codecs/wm8994.c

@@ -3015,18 +3015,22 @@ static int wm8994_set_bias_level(struct snd_soc_codec *codec,
 		break;
 
 	case SND_SOC_BIAS_OFF:
+		if (codec->bias_level == SND_SOC_BIAS_STANDBY) {
 			/* Switch over to startup biases */
 			snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
-				    WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
+					    WM8994_BIAS_SRC |
+					    WM8994_STARTUP_BIAS_ENA |
 					    WM8994_VMID_BUF_ENA |
 					    WM8994_VMID_RAMP_MASK,
-				    WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
+					    WM8994_BIAS_SRC |
+					    WM8994_STARTUP_BIAS_ENA |
 					    WM8994_VMID_BUF_ENA |
 					    (1 << WM8994_VMID_RAMP_SHIFT));
 
 			/* Disable main biases */
 			snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
-				    WM8994_BIAS_ENA | WM8994_VMID_SEL_MASK, 0);
+					    WM8994_BIAS_ENA |
+					    WM8994_VMID_SEL_MASK, 0);
 
 			/* Discharge line */
 			snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
@@ -3039,10 +3043,11 @@ static int wm8994_set_bias_level(struct snd_soc_codec *codec,
 
 			/* Switch off startup biases */
 			snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
-				    WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
+					    WM8994_BIAS_SRC |
+					    WM8994_STARTUP_BIAS_ENA |
 					    WM8994_VMID_BUF_ENA |
 					    WM8994_VMID_RAMP_MASK, 0);
-
+		}
 		break;
 	}
 	codec->bias_level = level;
@@ -3866,12 +3871,13 @@ static int wm8994_codec_probe(struct platform_device *pdev)
 	case 3:
 		wm8994->hubs.dcs_codes = -5;
 		wm8994->hubs.hp_startup_mode = 1;
+		wm8994->hubs.dcs_readback_mode = 1;
 		break;
 	default:
+		wm8994->hubs.dcs_readback_mode = 1;
 		break;
 	}
 
-
 	ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_MIC1_DET,
 				 wm8994_mic_irq, "Mic 1 detect", wm8994);
 	if (ret != 0)

sound/soc/codecs/wm_hubs.c

@@ -62,21 +62,27 @@ static const char *speaker_mode_text[] = {
 static const struct soc_enum speaker_mode =
 	SOC_ENUM_SINGLE(WM8993_SPKMIXR_ATTENUATION, 8, 2, speaker_mode_text);
 
-static void wait_for_dc_servo(struct snd_soc_codec *codec)
+static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op)
 {
 	unsigned int reg;
 	int count = 0;
+	unsigned int val;
+
+	val = op | WM8993_DCS_ENA_CHAN_0 | WM8993_DCS_ENA_CHAN_1;
+
+	/* Trigger the command */
+	snd_soc_write(codec, WM8993_DC_SERVO_0, val);
 
 	dev_dbg(codec->dev, "Waiting for DC servo...\n");
 
 	do {
 		count++;
 		msleep(1);
-		reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0);
+		reg = snd_soc_read(codec, WM8993_DC_SERVO_0);
 		dev_dbg(codec->dev, "DC servo: %x\n", reg);
-	} while (reg & WM8993_DCS_DATAPATH_BUSY && count < 400);
+	} while (reg & op && count < 400);
 
-	if (reg & WM8993_DCS_DATAPATH_BUSY)
+	if (reg & op)
 		dev_err(codec->dev, "Timed out waiting for DC Servo\n");
 }
 
@@ -86,51 +92,58 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec)
 static void calibrate_dc_servo(struct snd_soc_codec *codec)
 {
 	struct wm_hubs_data *hubs = codec->private_data;
-	u16 reg, dcs_cfg;
+	u16 reg, reg_l, reg_r, dcs_cfg;
 
 	/* Set for 32 series updates */
 	snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
 			    WM8993_DCS_SERIES_NO_01_MASK,
 			    32 << WM8993_DCS_SERIES_NO_01_SHIFT);
-
-	/* Enable the DC servo.  Write all bits to avoid triggering startup
-	 * or write calibration.
-	 */
-	snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
-			    0xFFFF,
-			    WM8993_DCS_ENA_CHAN_0 |
-			    WM8993_DCS_ENA_CHAN_1 |
-			    WM8993_DCS_TRIG_SERIES_1 |
-			    WM8993_DCS_TRIG_SERIES_0);
-
-	wait_for_dc_servo(codec);
+	wait_for_dc_servo(codec,
+			  WM8993_DCS_TRIG_SERIES_0 | WM8993_DCS_TRIG_SERIES_1);
 
 	/* Apply correction to DC servo result */
 	if (hubs->dcs_codes) {
 		dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
 			hubs->dcs_codes);
 
+		/* Different chips in the family support different
+		 * readback methods.
+		 */
+		switch (hubs->dcs_readback_mode) {
+		case 0:
+			reg_l = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1)
+				& WM8993_DCS_INTEG_CHAN_0_MASK;;
+			reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
+				& WM8993_DCS_INTEG_CHAN_1_MASK;
+			break;
+		case 1:
+			reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+			reg_l = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
+				>> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+			reg_r = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
+			break;
+		default:
+			WARN(1, "Unknown DCS readback method");
+			break;
+		}
+
 		/* HPOUT1L */
-		reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1) &
-			WM8993_DCS_INTEG_CHAN_0_MASK;;
-		reg += hubs->dcs_codes;
-		dcs_cfg = reg << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+		if (reg_l + hubs->dcs_codes > 0 &&
+		    reg_l + hubs->dcs_codes < 0xff)
+			reg_l += hubs->dcs_codes;
+		dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
 
 		/* HPOUT1R */
-		reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) &
-			WM8993_DCS_INTEG_CHAN_1_MASK;
-		reg += hubs->dcs_codes;
-		dcs_cfg |= reg;
+		if (reg_r + hubs->dcs_codes > 0 &&
+		    reg_r + hubs->dcs_codes < 0xff)
+			reg_r += hubs->dcs_codes;
+		dcs_cfg |= reg_r;
 
 		/* Do it */
 		snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
-		snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
-				    WM8993_DCS_TRIG_DAC_WR_0 |
-				    WM8993_DCS_TRIG_DAC_WR_1,
+		wait_for_dc_servo(codec,
 				  WM8993_DCS_TRIG_DAC_WR_0 |
 				  WM8993_DCS_TRIG_DAC_WR_1);
-
-		wait_for_dc_servo(codec);
 	}
 }
 
@@ -141,10 +154,16 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
 			       struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct wm_hubs_data *hubs = codec->private_data;
 	int ret;
 
 	ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
 
+	/* If we're applying an offset correction then updating the
+	 * callibration would be likely to introduce further offsets. */
+	if (hubs->dcs_codes)
+		return ret;
+
 	/* Only need to do this if the outputs are active */
 	if (snd_soc_read(codec, WM8993_POWER_MANAGEMENT_1)
 	    & (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA))

sound/soc/codecs/wm_hubs.h

@@ -21,6 +21,7 @@ extern const unsigned int wm_hubs_spkmix_tlv[];
 /* This *must* be the first element of the codec->private_data struct */
 struct wm_hubs_data {
 	int dcs_codes;
+	int dcs_readback_mode;
 	int hp_startup_mode;
 };
 

sound/soc/omap/omap-pcm.c

@@ -60,12 +60,11 @@ static void omap_pcm_dma_irq(int ch, u16 stat, void *data)
 	struct omap_runtime_data *prtd = runtime->private_data;
 	unsigned long flags;
 
-	if ((cpu_is_omap1510()) &&
-			(substream->stream == SNDRV_PCM_STREAM_PLAYBACK)) {
+	if ((cpu_is_omap1510())) {
 		/*
 		 * OMAP1510 doesn't fully support DMA progress counter
 		 * and there is no software emulation implemented yet,
-		 * so have to maintain our own playback progress counter
+		 * so have to maintain our own progress counters
 		 * that can be used by omap_pcm_pointer() instead.
 		 */
 		spin_lock_irqsave(&prtd->lock, flags);
@@ -191,8 +190,7 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream)
 	dma_params.frame_count	= runtime->periods;
 	omap_set_dma_params(prtd->dma_ch, &dma_params);
 
-	if ((cpu_is_omap1510()) &&
-			(substream->stream == SNDRV_PCM_STREAM_PLAYBACK))
+	if ((cpu_is_omap1510()))
 		omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ |
 			      OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
 	else
@@ -250,14 +248,15 @@ static snd_pcm_uframes_t omap_pcm_pointer(struct snd_pcm_substream *substream)
 	dma_addr_t ptr;
 	snd_pcm_uframes_t offset;
 
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+	if (cpu_is_omap1510()) {
+		offset = prtd->period_index * runtime->period_size;
+	} else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
 		ptr = omap_get_dma_dst_pos(prtd->dma_ch);
 		offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
-	} else if (!(cpu_is_omap1510())) {
+	} else {
 		ptr = omap_get_dma_src_pos(prtd->dma_ch);
 		offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
-	} else
-		offset = prtd->period_index * runtime->period_size;
+	}
 
 	if (offset >= runtime->buffer_size)
 		offset = 0;