clk: Improve clk_ops documentation

General:
  - Add parameter names to .round_rate() and .set_rate().

Documentation/clk.txt:
  - Add missing parameter for .set_rate(),
  - Add missing .debug_init().

include/linux/clk-provider.h:
  - Add parent rate documentation for .round_rate(),
  - Reorder documentation to match implementation order,
  - Add missing documentation for .init().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Documentation/clk.txt

@@ -68,21 +68,27 @@ the operations defined in clk.h:
 		int		(*is_enabled)(struct clk_hw *hw);
 		unsigned long	(*recalc_rate)(struct clk_hw *hw,
 						unsigned long parent_rate);
-		long		(*round_rate)(struct clk_hw *hw, unsigned long,
-						unsigned long *);
+		long		(*round_rate)(struct clk_hw *hw,
+						unsigned long rate,
+						unsigned long *parent_rate);
 		long		(*determine_rate)(struct clk_hw *hw,
 						unsigned long rate,
 						unsigned long *best_parent_rate,
 						struct clk **best_parent_clk);
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
-		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate);
 		int		(*set_rate_and_parent)(struct clk_hw *hw,
 					    unsigned long rate,
-					    unsigned long parent_rate, u8 index);
+					    unsigned long parent_rate,
+					    u8 index);
 		unsigned long	(*recalc_accuracy)(struct clk_hw *hw,
 						unsigned long parent_accuracy);
 		void		(*init)(struct clk_hw *hw);
+		int		(*debug_init)(struct clk_hw *hw,
+					      struct dentry *dentry);
 	};
 
 	Part 3 - hardware clk implementations

include/linux/clk-provider.h

@@ -81,12 +81,20 @@ struct dentry;
  *		this op is not set then clock rate will be initialized to 0.
  *
  * @round_rate:	Given a target rate as input, returns the closest rate actually
- *		supported by the clock.
+ *		supported by the clock. The parent rate is an input/output
+ *		parameter.
  *
  * @determine_rate: Given a target rate as input, returns the closest rate
  *		actually supported by the clock, and optionally the parent clock
  *		that should be used to provide the clock rate.
  *
+ * @set_parent:	Change the input source of this clock; for clocks with multiple
+ *		possible parents specify a new parent by passing in the index
+ *		as a u8 corresponding to the parent in either the .parent_names
+ *		or .parents arrays.  This function in affect translates an
+ *		array index into the value programmed into the hardware.
+ *		Returns 0 on success, -EERROR otherwise.
+ *
  * @get_parent:	Queries the hardware to determine the parent of a clock.  The
  *		return value is a u8 which specifies the index corresponding to
  *		the parent clock.  This index can be applied to either the
@@ -97,26 +105,12 @@ struct dentry;
  *		multiple parents.  It is optional (and unnecessary) for clocks
  *		with 0 or 1 parents.
  *
- * @set_parent:	Change the input source of this clock; for clocks with multiple
- *		possible parents specify a new parent by passing in the index
- *		as a u8 corresponding to the parent in either the .parent_names
- *		or .parents arrays.  This function in affect translates an
- *		array index into the value programmed into the hardware.
- *		Returns 0 on success, -EERROR otherwise.
- *
  * @set_rate:	Change the rate of this clock. The requested rate is specified
  *		by the second argument, which should typically be the return
  *		of .round_rate call.  The third argument gives the parent rate
  *		which is likely helpful for most .set_rate implementation.
  *		Returns 0 on success, -EERROR otherwise.
  *
- * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
- *		is expressed in ppb (parts per billion). The parent accuracy is
- *		an input parameter.
- *		Returns the calculated accuracy.  Optional - if	this op is not
- *		set then clock accuracy will be initialized to parent accuracy
- *		or 0 (perfect clock) if clock has no parent.
- *
  * @set_rate_and_parent: Change the rate and the parent of this clock. The
  *		requested rate is specified by the second argument, which
  *		should typically be the return of .round_rate call.  The
@@ -128,6 +122,18 @@ struct dentry;
  *		separately via calls to .set_parent and .set_rate.
  *		Returns 0 on success, -EERROR otherwise.
  *
+ * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
+ *		is expressed in ppb (parts per billion). The parent accuracy is
+ *		an input parameter.
+ *		Returns the calculated accuracy.  Optional - if	this op is not
+ *		set then clock accuracy will be initialized to parent accuracy
+ *		or 0 (perfect clock) if clock has no parent.
+ *
+ * @init:	Perform platform-specific initialization magic.
+ *		This is not not used by any of the basic clock types.
+ *		Please consider other ways of solving initialization problems
+ *		before using this callback, as its use is discouraged.
+ *
  * @debug_init:	Set up type-specific debugfs entries for this clock.  This
  *		is called once, after the debugfs directory entry for this
  *		clock has been created.  The dentry pointer representing that
@@ -157,15 +163,15 @@ struct clk_ops {
 	void		(*disable_unused)(struct clk_hw *hw);
 	unsigned long	(*recalc_rate)(struct clk_hw *hw,
 					unsigned long parent_rate);
-	long		(*round_rate)(struct clk_hw *hw, unsigned long,
-					unsigned long *);
+	long		(*round_rate)(struct clk_hw *hw, unsigned long rate,
+					unsigned long *parent_rate);
 	long		(*determine_rate)(struct clk_hw *hw, unsigned long rate,
 					unsigned long *best_parent_rate,
 					struct clk **best_parent_clk);
 	int		(*set_parent)(struct clk_hw *hw, u8 index);
 	u8		(*get_parent)(struct clk_hw *hw);
-	int		(*set_rate)(struct clk_hw *hw, unsigned long,
-				    unsigned long);
+	int		(*set_rate)(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate);
 	int		(*set_rate_and_parent)(struct clk_hw *hw,
 				    unsigned long rate,
 				    unsigned long parent_rate, u8 index);