Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (95 commits)
  V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilation
  V4L/DVB (9294): gspca: Add a stop sequence in t613.
  V4L/DVB (9293): gspca: Separate and fix the sensor dependant sequences in t613.
  V4L/DVB (9292): gspca: Call the control setting functions at init time in t613.
  V4L/DVB (9291): gspca: Do not set the white balance temperature by default in t613.
  V4L/DVB (9290): gspca: Adjust the sensor init sequences in t613.
  V4L/DVB (9289): gspca: Other sensor identified as om6802 in t613.
  V4L/DVB (9288): gspca: Write to the USB device and not USB interface in t613.
  V4L/DVB (9287): gspca: Change the name of the multi bytes write function in t613.
  V4L/DVB (9286): gspca: Compilation problem of gspca.c and the kernel version.
  V4L/DVB (9283): Correct typo and enable setting the gain on the mt9m111 sensor
  V4L/DVB (9282): Properly iterate the urbs when destroying them.
  V4L/DVB (9281): gspca: Add hflip and vflip to the po1030 sensor
  V4L/DVB (9280): gspca: Use the gspca debug macros
  V4L/DVB (9279): gspca: Correct some copyright headers
  V4L/DVB (9278): gspca: Remove the m5602_debug variable
  V4L/DVB (9277): gspca: propagate an error in m5602_start_transfer()
  V4L/DVB (9276): videobuf-dvb: two functions are now static
  V4L/DVB (9275): dvb: input data pointer of cx24116_writeregN() should be const
  V4L/DVB (9274): Remove spurious messages and turn into debug.
  ...

Documentation/video4linux/CARDLIST.au0828

   0 -> Unknown board                            (au0828)
-  1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
+  1 -> Hauppauge HVR950Q                        (au0828)        [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008]
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
   4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]

Documentation/video4linux/CARDLIST.tuner

@@ -75,3 +75,4 @@ tuner=73 - Samsung TCPG 6121P30A
 tuner=75 - Philips TEA5761 FM Radio
 tuner=76 - Xceive 5000 tuner
 tuner=77 - TCL tuner MF02GIP-5N-E
+tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner

drivers/media/common/tuners/mxl5005s.c

@@ -3481,7 +3481,9 @@ static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum,
 					}
 					ctrlVal = 0;
 					for (k = 0; k < state->MXL_Ctrl[i].size; k++)
-						ctrlVal += state->MXL_Ctrl[i].val[k] * (1 << k);
+						ctrlVal += state->
+							MXL_Ctrl[i].val[k] *
+							(1 << k);
 				} else
 					return -1;
 			}
@@ -3581,7 +3583,7 @@ static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit,
 
 static u32 MXL_Ceiling(u32 value, u32 resolution)
 {
-	return (value/resolution + (value % resolution > 0 ? 1 : 0));
+	return value / resolution + (value % resolution > 0 ? 1 : 0);
 }
 
 /* Retrieve the Initialzation Registers */
@@ -3910,7 +3912,10 @@ static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable,
 
 static int mxl5005s_init(struct dvb_frontend *fe)
 {
+	struct mxl5005s_state *state = fe->tuner_priv;
+
 	dprintk(1, "%s()\n", __func__);
+	state->current_mode = MXL_QAM;
 	return mxl5005s_reconfigure(fe, MXL_QAM, MXL5005S_BANDWIDTH_6MHZ);
 }
 
@@ -4092,7 +4097,6 @@ struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe,
 	state->frontend = fe;
 	state->config = config;
 	state->i2c = i2c;
-	state->current_mode = MXL_QAM;
 
 	printk(KERN_INFO "MXL5005S: Attached at address 0x%02x\n",
 		config->i2c_address);

drivers/media/common/tuners/tuner-simple.c

@@ -493,6 +493,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
 	case TUNER_PHILIPS_FM1216ME_MK3:
 	case TUNER_PHILIPS_FM1236_MK3:
 	case TUNER_PHILIPS_FMD1216ME_MK3:
+	case TUNER_PHILIPS_FMD1216MEX_MK3:
 	case TUNER_LG_NTSC_TAPE:
 	case TUNER_PHILIPS_FM1256_IH3:
 	case TUNER_TCL_MF02GIP_5N:
@@ -767,6 +768,7 @@ static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf,
 
 	switch (priv->type) {
 	case TUNER_PHILIPS_FMD1216ME_MK3:
+	case TUNER_PHILIPS_FMD1216MEX_MK3:
 		if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ &&
 		    params->frequency >= 158870000)
 			buf[3] |= 0x08;

drivers/media/common/tuners/tuner-types.c

@@ -946,7 +946,7 @@ static struct tuner_params tuner_tena_9533_di_params[] = {
 	},
 };
 
-/* ------------ TUNER_PHILIPS_FMD1216ME_MK3 - Philips PAL ------------ */
+/* ------------ TUNER_PHILIPS_FMD1216ME(X)_MK3 - Philips PAL ------------ */
 
 static struct tuner_range tuner_philips_fmd1216me_mk3_pal_ranges[] = {
 	{ 16 * 160.00 /*MHz*/, 0x86, 0x51, },
@@ -984,6 +984,27 @@ static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = {
 	},
 };
 
+static struct tuner_params tuner_philips_fmd1216mex_mk3_params[] = {
+	{
+		.type   = TUNER_PARAM_TYPE_PAL,
+		.ranges = tuner_philips_fmd1216me_mk3_pal_ranges,
+		.count  = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_pal_ranges),
+		.has_tda9887 = 1,
+		.port1_active = 1,
+		.port2_active = 1,
+		.port2_fm_high_sensitivity = 1,
+		.port2_invert_for_secam_lc = 1,
+		.port1_set_for_fm_mono = 1,
+		.radio_if = 1,
+		.fm_gain_normal = 1,
+	},
+	{
+		.type   = TUNER_PARAM_TYPE_DIGITAL,
+		.ranges = tuner_philips_fmd1216me_mk3_dvb_ranges,
+		.count  = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_dvb_ranges),
+		.iffreq = 16 * 36.125, /*MHz*/
+	},
+};
 
 /* ------ TUNER_LG_TDVS_H06XF - LG INNOTEK / INFINEON ATSC ----- */
 
@@ -1663,6 +1684,16 @@ struct tunertype tuners[] = {
 		.params = tuner_tcl_mf02gip_5n_params,
 		.count  = ARRAY_SIZE(tuner_tcl_mf02gip_5n_params),
 	},
+	[TUNER_PHILIPS_FMD1216MEX_MK3] = { /* Philips PAL */
+		.name   = "Philips FMD1216MEX MK3 Hybrid Tuner",
+		.params = tuner_philips_fmd1216mex_mk3_params,
+		.count  = ARRAY_SIZE(tuner_philips_fmd1216mex_mk3_params),
+		.min = 16 *  50.87,
+		.max = 16 * 858.00,
+		.stepsize = 166667,
+		.initdata = tua603x_agc112,
+		.sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 },
+	},
 };
 EXPORT_SYMBOL(tuners);
 

drivers/media/common/tuners/xc5000.c

@@ -43,7 +43,7 @@ MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization.");
 static DEFINE_MUTEX(xc5000_list_mutex);
 static LIST_HEAD(hybrid_tuner_instance_list);
 
-#define dprintk(level,fmt, arg...) if (debug >= level) \
+#define dprintk(level, fmt, arg...) if (debug >= level) \
 	printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
 
 #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw"
@@ -138,11 +138,11 @@ struct xc5000_priv {
    immediately the length of the following transaction.
 
 */
-typedef struct {
+struct XC_TV_STANDARD {
 	char *Name;
 	u16 AudioMode;
 	u16 VideoMode;
-} XC_TV_STANDARD;
+};
 
 /* Tuner standards */
 #define MN_NTSC_PAL_BTSC	0
@@ -169,7 +169,7 @@ typedef struct {
 #define FM_Radio_INPUT2 	21
 #define FM_Radio_INPUT1 	22
 
-static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
+static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
 	{"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
 	{"M/N-NTSC/PAL-A2",   0x0600, 0x8020},
 	{"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
@@ -183,7 +183,7 @@ static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
 	{"D/K-PAL-NICAM",     0x0E80, 0x8009},
 	{"D/K-PAL-MONO",      0x1478, 0x8009},
 	{"D/K-SECAM-A2 DK1",  0x1200, 0x8009},
-	{"D/K-SECAM-A2 L/DK3",0x0E00, 0x8009},
+	{"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009},
 	{"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
 	{"L-SECAM-NICAM",     0x8E82, 0x0009},
 	{"L'-SECAM-NICAM",    0x8E82, 0x4009},
@@ -307,9 +307,10 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
 	unsigned int len, pos, index;
 	u8 buf[XC_MAX_I2C_WRITE_LENGTH];
 
-	index=0;
-	while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) {
-		len = i2c_sequence[index]* 256 + i2c_sequence[index+1];
+	index = 0;
+	while ((i2c_sequence[index] != 0xFF) ||
+		(i2c_sequence[index + 1] != 0xFF)) {
+		len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
 		if (len == 0x0000) {
 			/* RESET command */
 			result = xc_reset(fe);
@@ -329,15 +330,17 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
 			buf[1] = i2c_sequence[index + 1];
 			pos = 2;
 			while (pos < len) {
-				if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) {
-					nbytes_to_send = XC_MAX_I2C_WRITE_LENGTH;
-				} else {
+				if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
+					nbytes_to_send =
+						XC_MAX_I2C_WRITE_LENGTH;
+				else
 					nbytes_to_send = (len - pos + 2);
+				for (i = 2; i < nbytes_to_send; i++) {
+					buf[i] = i2c_sequence[index + pos +
+						i - 2];
 				}
-				for (i=2; i<nbytes_to_send; i++) {
-					buf[i] = i2c_sequence[index + pos + i - 2];
-				}
-				result = xc_send_i2c_data(priv, buf, nbytes_to_send);
+				result = xc_send_i2c_data(priv, buf,
+					nbytes_to_send);
 
 				if (result != XC_RESULT_SUCCESS)
 					return result;
@@ -386,8 +389,7 @@ static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode)
 	dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
 		rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
 
-	if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE))
-	{
+	if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
 		rf_mode = XC_RF_MODE_CABLE;
 		printk(KERN_ERR
 			"%s(), Invalid mode, defaulting to CABLE",
@@ -560,13 +562,13 @@ static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 		.flags = I2C_M_RD, .buf = buf, .len = len };
 
 	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
-		printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len);
+		printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", (int)len);
 		return -EREMOTEIO;
 	}
 	return 0;
 }
 
-static int xc5000_fwupload(struct dvb_frontend* fe)
+static int xc5000_fwupload(struct dvb_frontend *fe)
 {
 	struct xc5000_priv *priv = fe->tuner_priv;
 	const struct firmware *fw;
@@ -576,7 +578,8 @@ static int xc5000_fwupload(struct dvb_frontend* fe)
 	printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n",
 		XC5000_DEFAULT_FIRMWARE);
 
-	ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c_props.adap->dev);
+	ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE,
+		&priv->i2c_props.adap->dev);
 	if (ret) {
 		printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
 		ret = XC_RESULT_RESET_FAILURE;
@@ -592,7 +595,7 @@ static int xc5000_fwupload(struct dvb_frontend* fe)
 		ret = XC_RESULT_RESET_FAILURE;
 	} else {
 		printk(KERN_INFO "xc5000: firmware upload\n");
-		ret = xc_load_i2c_sequence(fe,  fw->data );
+		ret = xc_load_i2c_sequence(fe,  fw->data);
 	}
 
 out:
@@ -651,7 +654,7 @@ static int xc5000_set_params(struct dvb_frontend *fe,
 
 	dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
 
-	switch(params->u.vsb.modulation) {
+	switch (params->u.vsb.modulation) {
 	case VSB_8:
 	case VSB_16:
 		dprintk(1, "%s() VSB modulation\n", __func__);
@@ -748,42 +751,42 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe,
 	/* FIX ME: Some video standards may have several possible audio
 		   standards. We simply default to one of them here.
 	 */
-	if(params->std & V4L2_STD_MN) {
+	if (params->std & V4L2_STD_MN) {
 		/* default to BTSC audio standard */
 		priv->video_standard = MN_NTSC_PAL_BTSC;
 		goto tune_channel;
 	}
 
-	if(params->std & V4L2_STD_PAL_BG) {
+	if (params->std & V4L2_STD_PAL_BG) {
 		/* default to NICAM audio standard */
 		priv->video_standard = BG_PAL_NICAM;
 		goto tune_channel;
 	}
 
-	if(params->std & V4L2_STD_PAL_I) {
+	if (params->std & V4L2_STD_PAL_I) {
 		/* default to NICAM audio standard */
 		priv->video_standard = I_PAL_NICAM;
 		goto tune_channel;
 	}
 
-	if(params->std & V4L2_STD_PAL_DK) {
+	if (params->std & V4L2_STD_PAL_DK) {
 		/* default to NICAM audio standard */
 		priv->video_standard = DK_PAL_NICAM;
 		goto tune_channel;
 	}
 
-	if(params->std & V4L2_STD_SECAM_DK) {
+	if (params->std & V4L2_STD_SECAM_DK) {
 		/* default to A2 DK1 audio standard */
 		priv->video_standard = DK_SECAM_A2DK1;
 		goto tune_channel;
 	}
 
-	if(params->std & V4L2_STD_SECAM_L) {
+	if (params->std & V4L2_STD_SECAM_L) {
 		priv->video_standard = L_SECAM_NICAM;
 		goto tune_channel;
 	}
 
-	if(params->std & V4L2_STD_SECAM_LC) {
+	if (params->std & V4L2_STD_SECAM_LC) {
 		priv->video_standard = LC_SECAM_NICAM;
 		goto tune_channel;
 	}
@@ -863,7 +866,7 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
 	 * I2C transactions until calibration is complete.  This way we
 	 * don't have to rely on clock stretching working.
 	 */
-	xc_wait( 100 );
+	xc_wait(100);
 
 	/* Default to "CABLE" mode */
 	ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
@@ -885,15 +888,13 @@ static int xc5000_sleep(struct dvb_frontend *fe)
 	 */
 
 	ret = xc_shutdown(priv);
-	if(ret != XC_RESULT_SUCCESS) {
+	if (ret != XC_RESULT_SUCCESS) {
 		printk(KERN_ERR
 			"xc5000: %s() unable to shutdown tuner\n",
 			__func__);
 		return -EREMOTEIO;
-	}
-	else {
+	} else
 		return XC_RESULT_SUCCESS;
-	}
 }
 
 static int xc5000_init(struct dvb_frontend *fe)
@@ -989,7 +990,7 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 	if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
 		goto fail;
 
-	switch(id) {
+	switch (id) {
 	case XC_PRODUCT_ID_FW_LOADED:
 		printk(KERN_INFO
 			"xc5000: Successfully identified at address 0x%02x\n",

drivers/media/common/tuners/xc5000.h

@@ -45,17 +45,17 @@ struct xc5000_config {
 
 #if defined(CONFIG_MEDIA_TUNER_XC5000) || \
     (defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE))
-extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe,
+extern struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 					  struct i2c_adapter *i2c,
 					  struct xc5000_config *cfg);
 #else
-static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe,
+static inline struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 						 struct i2c_adapter *i2c,
 						 struct xc5000_config *cfg)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
-#endif // CONFIG_MEDIA_TUNER_XC5000
+#endif
 
-#endif // __XC5000_H__
+#endif

drivers/media/dvb/dm1105/dm1105.c

@@ -595,6 +595,18 @@ static void dm1105dvb_hw_exit(struct dm1105dvb *dm1105dvb)
 	dm1105dvb_dma_unmap(dm1105dvb);
 }
 
+static struct stv0299_config sharp_z0194a_config = {
+	.demod_address = 0x68,
+	.inittab = sharp_z0194a_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = sharp_z0194a_set_symbol_rate,
+};
+
 static struct stv0288_config earda_config = {
 	.demod_address = 0x68,
 	.min_delay_ms = 100,

drivers/media/dvb/dvb-core/dvb_frontend.h

@@ -222,6 +222,7 @@ struct dvb_frontend {
 	struct dtv_frontend_properties dtv_property_cache;
 #define DVB_FRONTEND_COMPONENT_TUNER 0
 	int (*callback)(void *adapter_priv, int component, int cmd, int arg);
+	int id;
 };
 
 extern int dvb_register_frontend(struct dvb_adapter *dvb,

drivers/media/dvb/dvb-core/dvbdev.c

@@ -326,6 +326,9 @@ int dvb_register_adapter(struct dvb_adapter *adap, const char *name,
 	adap->name = name;
 	adap->module = module;
 	adap->device = device;
+	adap->mfe_shared = 0;
+	adap->mfe_dvbdev = NULL;
+	mutex_init (&adap->mfe_lock);
 
 	list_add_tail (&adap->list_head, &dvb_adapter_list);
 

drivers/media/dvb/dvb-core/dvbdev.h

@@ -62,6 +62,10 @@ struct dvb_adapter {
 	struct device *device;
 
 	struct module *module;
+
+	int mfe_shared;			/* indicates mutually exclusive frontends */
+	struct dvb_device *mfe_dvbdev;	/* frontend device in use */
+	struct mutex mfe_lock;		/* access lock for thread creation */
 };
 
 

drivers/media/dvb/dvb-usb/dw2102.c

@@ -422,6 +422,18 @@ static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 	return 0;
 }
 
+static struct stv0299_config sharp_z0194a_config = {
+	.demod_address = 0x68,
+	.inittab = sharp_z0194a_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = sharp_z0194a_set_symbol_rate,
+};
+
 static struct cx24116_config dw2104_config = {
 	.demod_address = 0x55,
 	.mpg_clk_pos_pol = 0x01,

drivers/media/dvb/frontends/cx22702.h

@@ -30,8 +30,7 @@
 
 #include <linux/dvb/frontend.h>
 
-struct cx22702_config
-{
+struct cx22702_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
 
@@ -41,16 +40,19 @@ struct cx22702_config
 	u8 output_mode;
 };
 
-#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) && defined(MODULE))
-extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config,
-					   struct i2c_adapter* i2c);
+#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) \
+	&& defined(MODULE))
+extern struct dvb_frontend *cx22702_attach(
+	const struct cx22702_config *config,
+	struct i2c_adapter *i2c);
 #else
-static inline struct dvb_frontend* cx22702_attach(const struct cx22702_config* config,
-					   struct i2c_adapter* i2c)
+static inline struct dvb_frontend *cx22702_attach(
+	const struct cx22702_config *config,
+	struct i2c_adapter *i2c)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
-#endif // CONFIG_DVB_CX22702
+#endif
 
-#endif // CX22702_H
+#endif

drivers/media/dvb/frontends/cx24116.h

@@ -23,31 +23,32 @@
 
 #include <linux/dvb/frontend.h>
 
-struct cx24116_config
-{
+struct cx24116_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
 
 	/* Need to set device param for start_dma */
-	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+	int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
 
 	/* Need to reset device during firmware loading */
-	int (*reset_device)(struct dvb_frontend* fe);
+	int (*reset_device)(struct dvb_frontend *fe);
 
 	/* Need to set MPEG parameters */
 	u8 mpg_clk_pos_pol:0x02;
 };
 
 #if defined(CONFIG_DVB_CX24116) || defined(CONFIG_DVB_CX24116_MODULE)
-extern struct dvb_frontend* cx24116_attach(const struct cx24116_config* config,
-					   struct i2c_adapter* i2c);
+extern struct dvb_frontend *cx24116_attach(
+	const struct cx24116_config *config,
+	struct i2c_adapter *i2c);
 #else
-static inline struct dvb_frontend* cx24116_attach(const struct cx24116_config* config,
-						  struct i2c_adapter* i2c)
+static inline struct dvb_frontend *cx24116_attach(
+	const struct cx24116_config *config,
+	struct i2c_adapter *i2c)
 {
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
-#endif // CONFIG_DVB_CX24116
+#endif
 
 #endif /* CX24116_H */

drivers/media/dvb/frontends/cx24123.h

@@ -23,13 +23,12 @@
 
 #include <linux/dvb/frontend.h>
 
-struct cx24123_config
-{
+struct cx24123_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
 
 	/* Need to set device param for start_dma */
-	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+	int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
 
 	/* 0 = LNB voltage normal, 1 = LNB voltage inverted */
 	int lnb_polarity;
@@ -39,7 +38,8 @@ struct cx24123_config
 	void (*agc_callback) (struct dvb_frontend *);
 };
 
-#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) && defined(MODULE))
+#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) \
+	&& defined(MODULE))
 extern struct dvb_frontend *cx24123_attach(const struct cx24123_config *config,
 					   struct i2c_adapter *i2c);
 extern struct i2c_adapter *cx24123_get_tuner_i2c_adapter(struct dvb_frontend *);
@@ -56,6 +56,6 @@ static struct i2c_adapter *
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
-#endif // CONFIG_DVB_CX24123
+#endif
 
 #endif /* CX24123_H */

drivers/media/dvb/frontends/s5h1409.h

@@ -24,8 +24,7 @@
 
 #include <linux/dvb/frontend.h>
 
-struct s5h1409_config
-{
+struct s5h1409_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
 
@@ -60,12 +59,14 @@ struct s5h1409_config
 	u16 mpeg_timing;
 };
 
-#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) && defined(MODULE))
-extern struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config,
-					   struct i2c_adapter* i2c);
+#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) \
+	&& defined(MODULE))
+extern struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config,
+					   struct i2c_adapter *i2c);
 #else
-static inline struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config,
-						  struct i2c_adapter* i2c)
+static inline struct dvb_frontend *s5h1409_attach(
+	const struct s5h1409_config *config,
+	struct i2c_adapter *i2c)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;

drivers/media/dvb/frontends/s5h1411.c

@@ -343,7 +343,7 @@ static int s5h1411_writereg(struct s5h1411_state *state,
 	u8 addr, u8 reg, u16 data)
 {
 	int ret;
-	u8 buf [] = { reg, data >> 8,  data & 0xff };
+	u8 buf[] = { reg, data >> 8,  data & 0xff };
 
 	struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 };
 
@@ -359,10 +359,10 @@ static int s5h1411_writereg(struct s5h1411_state *state,
 static u16 s5h1411_readreg(struct s5h1411_state *state, u8 addr, u8 reg)
 {
 	int ret;
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0, 0 };
+	u8 b0[] = { reg };
+	u8 b1[] = { 0, 0 };
 
-	struct i2c_msg msg [] = {
+	struct i2c_msg msg[] = {
 		{ .addr = addr, .flags = 0, .buf = b0, .len = 1 },
 		{ .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
 

drivers/media/dvb/frontends/tda10048.c

@@ -195,7 +195,7 @@ static struct init_tab {
 static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
 {
 	int ret;
-	u8 buf [] = { reg, data };
+	u8 buf[] = { reg, data };
 	struct i2c_msg msg = {
 		.addr = state->config->demod_address,
 		.flags = 0, .buf = buf, .len = 2 };
@@ -213,9 +213,9 @@ static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
 static u8 tda10048_readreg(struct tda10048_state *state, u8 reg)
 {
 	int ret;
-	u8 b0 [] = { reg };
-	u8 b1 [] = { 0 };
-	struct i2c_msg msg [] = {
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+	struct i2c_msg msg[] = {
 		{ .addr = state->config->demod_address,
 			.flags = 0, .buf = b0, .len = 1 },
 		{ .addr = state->config->demod_address,
@@ -393,43 +393,89 @@ static int tda10048_get_tps(struct tda10048_state *state,
 
 	val = tda10048_readreg(state, TDA10048_OUT_CONF2);
 	switch ((val & 0x60) >> 5) {
-	case 0: p->constellation =   QPSK; break;
-	case 1: p->constellation = QAM_16; break;
-	case 2: p->constellation = QAM_64; break;
+	case 0:
+		p->constellation = QPSK;
+		break;
+	case 1:
+		p->constellation = QAM_16;
+		break;
+	case 2:
+		p->constellation = QAM_64;
+		break;
 	}
 	switch ((val & 0x18) >> 3) {
-	case 0: p->hierarchy_information = HIERARCHY_NONE; break;
-	case 1: p->hierarchy_information =    HIERARCHY_1; break;
-	case 2: p->hierarchy_information =    HIERARCHY_2; break;
-	case 3: p->hierarchy_information =    HIERARCHY_4; break;
+	case 0:
+		p->hierarchy_information = HIERARCHY_NONE;
+		break;
+	case 1:
+		p->hierarchy_information = HIERARCHY_1;
+		break;
+	case 2:
+		p->hierarchy_information = HIERARCHY_2;
+		break;
+	case 3:
+		p->hierarchy_information = HIERARCHY_4;
+		break;
 	}
 	switch (val & 0x07) {
-	case 0: p->code_rate_HP = FEC_1_2; break;
-	case 1: p->code_rate_HP = FEC_2_3; break;
-	case 2: p->code_rate_HP = FEC_3_4; break;
-	case 3: p->code_rate_HP = FEC_5_6; break;
-	case 4: p->code_rate_HP = FEC_7_8; break;
+	case 0:
+		p->code_rate_HP = FEC_1_2;
+		break;
+	case 1:
+		p->code_rate_HP = FEC_2_3;
+		break;
+	case 2:
+		p->code_rate_HP = FEC_3_4;
+		break;
+	case 3:
+		p->code_rate_HP = FEC_5_6;
+		break;
+	case 4:
+		p->code_rate_HP = FEC_7_8;
+		break;
 	}
 
 	val = tda10048_readreg(state, TDA10048_OUT_CONF3);
 	switch (val & 0x07) {
-	case 0: p->code_rate_LP = FEC_1_2; break;
-	case 1: p->code_rate_LP = FEC_2_3; break;
-	case 2: p->code_rate_LP = FEC_3_4; break;
-	case 3: p->code_rate_LP = FEC_5_6; break;
-	case 4: p->code_rate_LP = FEC_7_8; break;
+	case 0:
+		p->code_rate_LP = FEC_1_2;
+		break;
+	case 1:
+		p->code_rate_LP = FEC_2_3;
+		break;
+	case 2:
+		p->code_rate_LP = FEC_3_4;
+		break;
+	case 3:
+		p->code_rate_LP = FEC_5_6;
+		break;
+	case 4:
+		p->code_rate_LP = FEC_7_8;
+		break;
 	}
 
 	val = tda10048_readreg(state, TDA10048_OUT_CONF1);
 	switch ((val & 0x0c) >> 2) {
-	case 0: p->guard_interval = GUARD_INTERVAL_1_32; break;
-	case 1: p->guard_interval = GUARD_INTERVAL_1_16; break;
-	case 2: p->guard_interval =  GUARD_INTERVAL_1_8; break;
-	case 3: p->guard_interval =  GUARD_INTERVAL_1_4; break;
+	case 0:
+		p->guard_interval = GUARD_INTERVAL_1_32;
+		break;
+	case 1:
+		p->guard_interval = GUARD_INTERVAL_1_16;
+		break;
+	case 2:
+		p->guard_interval =  GUARD_INTERVAL_1_8;
+		break;
+	case 3:
+		p->guard_interval =  GUARD_INTERVAL_1_4;
+		break;
 	}
 	switch (val & 0x02) {
-	case 0: p->transmission_mode = TRANSMISSION_MODE_2K; break;
-	case 1: p->transmission_mode = TRANSMISSION_MODE_8K; break;
+	case 0:
+		p->transmission_mode = TRANSMISSION_MODE_2K;
+		break;
+	case 1:
+		p->transmission_mode = TRANSMISSION_MODE_8K;
+		break;
 	}
 
 	return 0;

drivers/media/dvb/frontends/z0194a.h

@@ -12,7 +12,7 @@
 #ifndef Z0194A
 #define Z0194A
 
-static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe,
+static int sharp_z0194a_set_symbol_rate(struct dvb_frontend *fe,
 					 u32 srate, u32 ratio)
 {
 	u8 aclk = 0;
@@ -40,7 +40,7 @@ static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe,
 	return 0;
 }
 
-static u8 sharp_z0194a__inittab[] = {
+static u8 sharp_z0194a_inittab[] = {
 	0x01, 0x15,
 	0x02, 0x00,
 	0x03, 0x00,
@@ -82,16 +82,4 @@ static u8 sharp_z0194a__inittab[] = {
 	0xff, 0xff
 };
 
-static struct stv0299_config sharp_z0194a_config = {
-	.demod_address = 0x68,
-	.inittab = sharp_z0194a__inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = sharp_z0194a__set_symbol_rate,
-};
-
 #endif

drivers/media/dvb/siano/sms-cards.c

@@ -42,6 +42,10 @@ struct usb_device_id smsusb_id_table[] = {
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0x5510),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+	{ USB_DEVICE(0x2040, 0x5520),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+	{ USB_DEVICE(0x2040, 0x5530),
+		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0x5580),
 		.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
 	{ USB_DEVICE(0x2040, 0x5590),

drivers/media/radio/Kconfig

@@ -359,7 +359,7 @@ config USB_SI470X
 	  computer's USB port.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called radio-silabs.
+	  module will be called radio-si470x.
 
 config USB_MR800
 	tristate "AverMedia MR 800 USB FM radio support"

drivers/media/video/au0828/au0828-cards.c

@@ -90,6 +90,7 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
 	case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
 	case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
 	case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */
+	case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
 	case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */
 	case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
 		break;
@@ -185,7 +186,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
 }
 
 /* table of devices that work with this driver */
-struct usb_device_id au0828_usb_id_table [] = {
+struct usb_device_id au0828_usb_id_table[] = {
 	{ USB_DEVICE(0x2040, 0x7200),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 	{ USB_DEVICE(0x2040, 0x7240),
@@ -198,6 +199,8 @@ struct usb_device_id au0828_usb_id_table [] = {
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 	{ USB_DEVICE(0x2040, 0x721b),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x721e),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 	{ USB_DEVICE(0x2040, 0x721f),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 	{ USB_DEVICE(0x2040, 0x7280),

drivers/media/video/au0828/au0828-core.c

@@ -91,7 +91,8 @@ static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value,
 		status = usb_control_msg(dev->usbdev,
 				usb_sndctrlpipe(dev->usbdev, 0),
 				request,
-				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				USB_DIR_OUT | USB_TYPE_VENDOR |
+					USB_RECIP_DEVICE,
 				value, index,
 				cp, size, 1000);
 

drivers/media/video/au0828/au0828-dvb.c

@@ -173,7 +173,8 @@ static int start_urb_transfer(struct au0828_dev *dev)
 		purb->status = -EINPROGRESS;
 		usb_fill_bulk_urb(purb,
 				  dev->usbdev,
-				  usb_rcvbulkpipe(dev->usbdev, _AU0828_BULKPIPE),
+				  usb_rcvbulkpipe(dev->usbdev,
+					_AU0828_BULKPIPE),
 				  purb->transfer_buffer,
 				  URB_BUFSIZE,
 				  urb_completion,

drivers/media/video/cx23885/cx23885-i2c.c

@@ -131,7 +131,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 			printk(" >\n");
 	}
 
-	for (cnt = 1; cnt < msg->len; cnt++ ) {
+	for (cnt = 1; cnt < msg->len; cnt++) {
 		/* following bytes */
 		wdata = msg->buf[cnt];
 		ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
@@ -151,9 +151,9 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 		if (retval == 0)
 			goto eio;
 		if (i2c_debug) {
-			printk(" %02x", msg->buf[cnt]);
+			dprintk(1, " %02x", msg->buf[cnt]);
 			if (!(ctrl & I2C_NOSTOP))
-				printk(" >\n");
+				dprintk(1, " >\n");
 		}
 	}
 	return msg->len;
@@ -162,7 +162,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 	retval = -EIO;
  err:
 	if (i2c_debug)
-		printk(" ERR: %d\n", retval);
+		printk(KERN_ERR " ERR: %d\n", retval);
 	return retval;
 }
 
@@ -194,12 +194,12 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 
 	if (i2c_debug) {
 		if (joined)
-			printk(" R");
+			dprintk(1, " R");
 		else
-			printk(" <R %02x", (msg->addr << 1) + 1);
+			dprintk(1, " <R %02x", (msg->addr << 1) + 1);
 	}
 
-	for(cnt = 0; cnt < msg->len; cnt++) {
+	for (cnt = 0; cnt < msg->len; cnt++) {
 
 		ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1;
 
@@ -216,9 +216,9 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 			goto eio;
 		msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
 		if (i2c_debug) {
-			printk(" %02x", msg->buf[cnt]);
+			dprintk(1, " %02x", msg->buf[cnt]);
 			if (!(ctrl & I2C_NOSTOP))
-				printk(" >\n");
+				dprintk(1, " >\n");
 		}
 	}
 	return msg->len;
@@ -227,7 +227,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 	retval = -EIO;
  err:
 	if (i2c_debug)
-		printk(" ERR: %d\n", retval);
+		printk(KERN_ERR " ERR: %d\n", retval);
 	return retval;
 }
 
@@ -355,13 +355,13 @@ static struct i2c_client cx23885_i2c_client_template = {
 static char *i2c_devs[128] = {
 	[0x10 >> 1] = "tda10048",
 	[0x12 >> 1] = "dib7000pc",
-	[ 0x1c >> 1 ] = "lgdt3303",
-	[ 0x86 >> 1 ] = "tda9887",
-	[ 0x32 >> 1 ] = "cx24227",
-	[ 0x88 >> 1 ] = "cx25837",
-	[ 0x84 >> 1 ] = "tda8295",
-	[ 0xa0 >> 1 ] = "eeprom",
-	[ 0xc0 >> 1 ] = "tuner/mt2131/tda8275",
+	[0x1c >> 1] = "lgdt3303",
+	[0x86 >> 1] = "tda9887",
+	[0x32 >> 1] = "cx24227",
+	[0x88 >> 1] = "cx25837",
+	[0x84 >> 1] = "tda8295",
+	[0xa0 >> 1] = "eeprom",
+	[0xc0 >> 1] = "tuner/mt2131/tda8275",
 	[0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028",
 	[0xc8 >> 1] = "tuner/xc3028L",
 };
@@ -376,7 +376,7 @@ static void do_i2c_scan(char *name, struct i2c_client *c)
 		rc = i2c_master_recv(c, &buf, 0);
 		if (rc < 0)
 			continue;
-		printk("%s: i2c scan: found device @ 0x%x  [%s]\n",
+		printk(KERN_INFO "%s: i2c scan: found device @ 0x%x  [%s]\n",
 		       name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
 	}
 }
@@ -408,11 +408,12 @@ int cx23885_i2c_register(struct cx23885_i2c *bus)
 	bus->i2c_client.adapter = &bus->i2c_adap;
 
 	if (0 == bus->i2c_rc) {
-		printk("%s: i2c bus %d registered\n", dev->name, bus->nr);
+		dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr);
 		if (i2c_scan)
 			do_i2c_scan(dev->name, &bus->i2c_client);
 	} else
-		printk("%s: i2c bus %d register FAILED\n", dev->name, bus->nr);
+		printk(KERN_WARNING "%s: i2c bus %d register FAILED\n",
+			dev->name, bus->nr);
 
 	return bus->i2c_rc;
 }

drivers/media/video/cx23885/cx23885-video.c

@@ -285,11 +285,10 @@ static void cx23885_video_wakeup(struct cx23885_dev *dev,
 		list_del(&buf->vb.queue);
 		wake_up(&buf->vb.done);
 	}
-	if (list_empty(&q->active)) {
+	if (list_empty(&q->active))
 		del_timer(&q->timeout);
-	} else {
+	else
 		mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
-	}
 	if (bc != 1)
 		printk(KERN_ERR "%s: %d buffers handled (should be 1)\n",
 			__func__, bc);
@@ -379,12 +378,12 @@ static int res_get(struct cx23885_dev *dev, struct cx23885_fh *fh,
 
 static int res_check(struct cx23885_fh *fh, unsigned int bit)
 {
-	return (fh->resources & bit);
+	return fh->resources & bit;
 }
 
 static int res_locked(struct cx23885_dev *dev, unsigned int bit)
 {
-	return (dev->resources & bit);
+	return dev->resources & bit;
 }
 
 static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh,
@@ -887,14 +886,16 @@ static int video_mmap(struct file *file, struct vm_area_struct *vma)
 /* ------------------------------------------------------------------ */
 /* VIDEO CTRL IOCTLS                                                  */
 
-static int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl)
+static int cx23885_get_control(struct cx23885_dev *dev,
+	struct v4l2_control *ctl)
 {
 	dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__);
 	cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_CTRL, ctl);
 	return 0;
 }
 
-static int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl)
+static int cx23885_set_control(struct cx23885_dev *dev,
+	struct v4l2_control *ctl)
 {
 	dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)"
 		" (disabled - no action)\n", __func__);
@@ -1073,29 +1074,29 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 	struct v4l2_requestbuffers *p)
 {
 	struct cx23885_fh *fh = priv;
-	return (videobuf_reqbufs(get_queue(fh), p));
+	return videobuf_reqbufs(get_queue(fh), p);
 }
 
 static int vidioc_querybuf(struct file *file, void *priv,
 	struct v4l2_buffer *p)
 {
 	struct cx23885_fh *fh = priv;
-	return (videobuf_querybuf(get_queue(fh), p));
+	return videobuf_querybuf(get_queue(fh), p);
 }
 
 static int vidioc_qbuf(struct file *file, void *priv,
 	struct v4l2_buffer *p)
 {
 	struct cx23885_fh *fh = priv;
-	return (videobuf_qbuf(get_queue(fh), p));
+	return videobuf_qbuf(get_queue(fh), p);
 }
 
 static int vidioc_dqbuf(struct file *file, void *priv,
 	struct v4l2_buffer *p)
 {
 	struct cx23885_fh *fh = priv;
-	return (videobuf_dqbuf(get_queue(fh), p,
-				file->f_flags & O_NONBLOCK));
+	return videobuf_dqbuf(get_queue(fh), p,
+				file->f_flags & O_NONBLOCK);
 }
 
 static int vidioc_streamon(struct file *file, void *priv,

drivers/media/video/cx23885/cx23885.h

@@ -37,7 +37,7 @@
 #include <linux/version.h>
 #include <linux/mutex.h>
 
-#define CX23885_VERSION_CODE KERNEL_VERSION(0,0,1)
+#define CX23885_VERSION_CODE KERNEL_VERSION(0, 0, 1)
 
 #define UNSET (-1U)
 
@@ -225,7 +225,7 @@ struct cx23885_tsport {
 	int                        nr;
 	int                        sram_chno;
 
-	struct videobuf_dvb        dvb;
+	struct videobuf_dvb_frontends frontends;
 
 	/* dma queues */
 	struct cx23885_dmaqueue    mpegq;
@@ -262,6 +262,9 @@ struct cx23885_tsport {
 	u32                        src_sel_val;
 	u32                        vld_misc_val;
 	u32                        hw_sop_ctrl_val;
+
+	/* Allow a single tsport to have multiple frontends */
+	u32                        num_frontends;
 };
 
 struct cx23885_dev {
@@ -367,14 +370,14 @@ struct sram_channel {
 /* ----------------------------------------------------------- */
 
 #define cx_read(reg)             readl(dev->lmmio + ((reg)>>2))
-#define cx_write(reg,value)      writel((value), dev->lmmio + ((reg)>>2))
+#define cx_write(reg, value)     writel((value), dev->lmmio + ((reg)>>2))
 
-#define cx_andor(reg,mask,value) \
+#define cx_andor(reg, mask, value) \
   writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\
   ((value) & (mask)), dev->lmmio+((reg)>>2))
 
-#define cx_set(reg,bit)          cx_andor((reg),(bit),(bit))
-#define cx_clear(reg,bit)        cx_andor((reg),(bit),0)
+#define cx_set(reg, bit)          cx_andor((reg), (bit), (bit))
+#define cx_clear(reg, bit)        cx_andor((reg), (bit), 0)
 
 /* ----------------------------------------------------------- */
 /* cx23885-core.c                                              */
@@ -411,7 +414,8 @@ extern const unsigned int cx23885_bcount;
 extern struct cx23885_subid cx23885_subids[];
 extern const unsigned int cx23885_idcount;
 
-extern int cx23885_tuner_callback(void *priv, int component, int command, int arg);
+extern int cx23885_tuner_callback(void *priv, int component,
+	int command, int arg);
 extern void cx23885_card_list(struct cx23885_dev *dev);
 extern int  cx23885_ir_init(struct cx23885_dev *dev);
 extern void cx23885_gpio_setup(struct cx23885_dev *dev);
@@ -479,11 +483,3 @@ static inline unsigned int norm_swidth(v4l2_std_id norm)
 {
 	return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922;
 }
-
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */

drivers/media/video/cx88/cx88-core.c

@@ -549,7 +549,8 @@ void cx88_wakeup(struct cx88_core *core,
 		mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
 	}
 	if (bc != 1)
-		printk("%s: %d buffers handled (should be 1)\n",__func__,bc);
+		dprintk(2, "%s: %d buffers handled (should be 1)\n",
+			__func__, bc);
 }
 
 void cx88_shutdown(struct cx88_core *core)

drivers/media/video/gspca/gspca.h

@@ -2,7 +2,6 @@
 #define GSPCAV2_H
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/usb.h>
 #include <linux/videodev2.h>