drm/i915: Comments for semaphore clarification

Semaphores are tied very closely to the rings in the GPU. Trivial patch
adds comments to the existing code so that when we add new rings we can
include comments there as well. It also helps distinguish the ring to
semaphore mailbox interactions by using the ringname in the semaphore
data structures.

This patch should have no functional impact.

v2: The English parts (as opposed to register names) of the comments
were reversed. (Damien)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -265,12 +265,12 @@
 #define  MI_SEMAPHORE_UPDATE	    (1<<21)
 #define  MI_SEMAPHORE_COMPARE	    (1<<20)
 #define  MI_SEMAPHORE_REGISTER	    (1<<18)
-#define  MI_SEMAPHORE_SYNC_RV	    (2<<16)
-#define  MI_SEMAPHORE_SYNC_RB	    (0<<16)
-#define  MI_SEMAPHORE_SYNC_VR	    (0<<16)
-#define  MI_SEMAPHORE_SYNC_VB	    (2<<16)
-#define  MI_SEMAPHORE_SYNC_BR	    (2<<16)
-#define  MI_SEMAPHORE_SYNC_BV	    (0<<16)
+#define  MI_SEMAPHORE_SYNC_RB	    (0<<16) /* BCS wait for RCS  (BRSYNC) */
+#define  MI_SEMAPHORE_SYNC_RV	    (2<<16) /* VCS wait for RCS  (VRSYNC) */
+#define  MI_SEMAPHORE_SYNC_VR	    (0<<16) /* RCS wait for VCS  (RVSYNC) */
+#define  MI_SEMAPHORE_SYNC_VB	    (2<<16) /* BCS wait for VCS  (BVSYNC) */
+#define  MI_SEMAPHORE_SYNC_BV	    (0<<16) /* VCS wait for BCS  (VBSYNC) */
+#define  MI_SEMAPHORE_SYNC_BR	    (2<<16) /* RCS wait for BCS  (RBSYNC) */
 #define  MI_SEMAPHORE_SYNC_INVALID  (1<<0)
 /*
  * 3D instructions used by the kernel

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -1671,9 +1671,9 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 		ring->get_seqno = gen6_ring_get_seqno;
 		ring->set_seqno = ring_set_seqno;
 		ring->sync_to = gen6_ring_sync;
-		ring->semaphore_register[0] = MI_SEMAPHORE_SYNC_INVALID;
-		ring->semaphore_register[1] = MI_SEMAPHORE_SYNC_RV;
-		ring->semaphore_register[2] = MI_SEMAPHORE_SYNC_RB;
+		ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore_register[VCS] = MI_SEMAPHORE_SYNC_RV;
+		ring->semaphore_register[BCS] = MI_SEMAPHORE_SYNC_RB;
 		ring->signal_mbox[0] = GEN6_VRSYNC;
 		ring->signal_mbox[1] = GEN6_BRSYNC;
 	} else if (IS_GEN5(dev)) {
@@ -1830,9 +1830,9 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 		ring->irq_put = gen6_ring_put_irq;
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
 		ring->sync_to = gen6_ring_sync;
-		ring->semaphore_register[0] = MI_SEMAPHORE_SYNC_VR;
-		ring->semaphore_register[1] = MI_SEMAPHORE_SYNC_INVALID;
-		ring->semaphore_register[2] = MI_SEMAPHORE_SYNC_VB;
+		ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_VR;
+		ring->semaphore_register[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore_register[BCS] = MI_SEMAPHORE_SYNC_VB;
 		ring->signal_mbox[0] = GEN6_RVSYNC;
 		ring->signal_mbox[1] = GEN6_BVSYNC;
 	} else {
@@ -1876,9 +1876,9 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
 	ring->irq_put = gen6_ring_put_irq;
 	ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
 	ring->sync_to = gen6_ring_sync;
-	ring->semaphore_register[0] = MI_SEMAPHORE_SYNC_BR;
-	ring->semaphore_register[1] = MI_SEMAPHORE_SYNC_BV;
-	ring->semaphore_register[2] = MI_SEMAPHORE_SYNC_INVALID;
+	ring->semaphore_register[RCS] = MI_SEMAPHORE_SYNC_BR;
+	ring->semaphore_register[VCS] = MI_SEMAPHORE_SYNC_BV;
+	ring->semaphore_register[BCS] = MI_SEMAPHORE_SYNC_INVALID;
 	ring->signal_mbox[0] = GEN6_RBSYNC;
 	ring->signal_mbox[1] = GEN6_VBSYNC;
 	ring->init = init_ring_common;

drivers/gpu/drm/i915/intel_ringbuffer.h

@@ -105,8 +105,8 @@ struct  intel_ring_buffer {
 	int		(*sync_to)(struct intel_ring_buffer *ring,
 				   struct intel_ring_buffer *to,
 				   u32 seqno);
-
-	u32		semaphore_register[3]; /*our mbox written by others */
+	/* our mbox written by others */
+	u32		semaphore_register[I915_NUM_RINGS];
 	u32		signal_mbox[2]; /* mboxes this ring signals to */
 	/**
 	 * List of objects currently involved in rendering from the