Skip to content

L
linux
Commit 565bae6a authored by Christoph Hellwig's avatar Christoph Hellwig Committed by James Bottomley
Browse files
Options

[SCSI] 53c7xx: kill driver 

It's been more than enough time now to try to get the new m68k drivers
into the tree.  Let's remove the old ones and we can remerge the new
glue once it's ready.  Given that there are patches to rename two out
of the three drivers in m68k CVS and all of them need a lot of
codingstyle love anyway that's probably the better strategy to begin
with.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: linux-m68k@vger.kernel.org
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent ddc914c7
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1 addition and 12651 deletions
drivers/scsi/53c7xx.c deleted 100644 → 0
View file @ ddc914c7
This diff is collapsed.
drivers/scsi/53c7xx.h deleted 100644 → 0
View file @ ddc914c7
This diff is collapsed.
drivers/scsi/53c7xx.scr deleted 100644 → 0
View file @ ddc914c7
This diff is collapsed.
drivers/scsi/53c7xx_d.h_shipped deleted 100644 → 0
View file @ ddc914c7
This diff is collapsed.
drivers/scsi/53c7xx_u.h_shipped deleted 100644 → 0
View file @ ddc914c7
#undef A_NCR53c7xx_msg_abort
#undef A_NCR53c7xx_msg_reject
#undef A_NCR53c7xx_sink
#undef A_NCR53c7xx_zero
#undef A_NOP_insn
#undef A_addr_dsa
#undef A_addr_reconnect_dsa_head
#undef A_addr_scratch
#undef A_addr_temp
#undef A_dmode_memory_to_memory
#undef A_dmode_memory_to_ncr
#undef A_dmode_ncr_to_memory
#undef A_dsa_check_reselect
#undef A_dsa_cmdout
#undef A_dsa_cmnd
#undef A_dsa_datain
#undef A_dsa_dataout
#undef A_dsa_end
#undef A_dsa_fields_start
#undef A_dsa_msgin
#undef A_dsa_msgout
#undef A_dsa_msgout_other
#undef A_dsa_next
#undef A_dsa_restore_pointers
#undef A_dsa_save_data_pointer
#undef A_dsa_select
#undef A_dsa_sscf_710
#undef A_dsa_status
#undef A_dsa_temp_addr_array_value
#undef A_dsa_temp_addr_dsa_value
#undef A_dsa_temp_addr_new_value
#undef A_dsa_temp_addr_next
#undef A_dsa_temp_addr_residual
#undef A_dsa_temp_addr_saved_pointer
#undef A_dsa_temp_addr_saved_residual
#undef A_dsa_temp_lun
#undef A_dsa_temp_next
#undef A_dsa_temp_sync
#undef A_dsa_temp_target
#undef A_emulfly
#undef A_int_debug_break
#undef A_int_debug_panic
#undef A_int_err_check_condition
#undef A_int_err_no_phase
#undef A_int_err_selected
#undef A_int_err_unexpected_phase
#undef A_int_err_unexpected_reselect
#undef A_int_msg_1
#undef A_int_msg_sdtr
#undef A_int_msg_wdtr
#undef A_int_norm_aborted
#undef A_int_norm_command_complete
#undef A_int_norm_disconnected
#undef A_int_norm_emulateintfly
#undef A_int_norm_reselect_complete
#undef A_int_norm_reset
#undef A_int_norm_select_complete
#undef A_int_test_1
#undef A_int_test_2
#undef A_int_test_3
#undef A_msg_buf
#undef A_reconnect_dsa_head
#undef A_reselected_identify
#undef A_reselected_tag
#undef A_saved_dsa
#undef A_schedule
#undef A_test_dest
#undef A_test_src
#undef Ent_accept_message
#undef Ent_cmdout_cmdout
#undef Ent_command_complete
#undef Ent_command_complete_msgin
#undef Ent_data_transfer
#undef Ent_datain_to_jump
#undef Ent_debug_break
#undef Ent_dsa_code_begin
#undef Ent_dsa_code_check_reselect
#undef Ent_dsa_code_fix_jump
#undef Ent_dsa_code_restore_pointers
#undef Ent_dsa_code_save_data_pointer
#undef Ent_dsa_code_template
#undef Ent_dsa_code_template_end
#undef Ent_dsa_schedule
#undef Ent_dsa_zero
#undef Ent_end_data_transfer
#undef Ent_initiator_abort
#undef Ent_msg_in
#undef Ent_msg_in_restart
#undef Ent_other_in
#undef Ent_other_out
#undef Ent_other_transfer
#undef Ent_reject_message
#undef Ent_reselected_check_next
#undef Ent_reselected_ok
#undef Ent_respond_message
#undef Ent_select
#undef Ent_select_msgout
#undef Ent_target_abort
#undef Ent_test_1
#undef Ent_test_2
#undef Ent_test_2_msgout
#undef Ent_wait_reselect
drivers/scsi/Makefile
View file @ 565bae6a
......@@ -37,7 +37,6 @@ obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o iscsi_tcp.o
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
......@@ -53,8 +52,6 @@ obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
obj-$(CONFIG_MVME16x_SCSI) += mvme16x.o 53c7xx.o
obj-$(CONFIG_BVME6000_SCSI) += bvme6000.o 53c7xx.o
obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o
obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o
obj-$(CONFIG_SCSI_PSI240I) += psi240i.o
......@@ -169,10 +166,8 @@ NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
# Files generated that shall be removed upon make clean
clean-files := 53c7xx_d.h 53c700_d.h \
53c7xx_u.h 53c700_u.h
clean-files := 53c700_d.h 53c700_u.h
$(obj)/53c7xx.o: $(obj)/53c7xx_d.h $(obj)/53c7xx_u.h
$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
# If you want to play with the firmware, uncomment
......@@ -180,11 +175,6 @@ $(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
ifdef GENERATE_FIRMWARE
$(obj)/53c7xx_d.h: $(src)/53c7xx.scr $(src)/script_asm.pl
$(CPP) -traditional -DCHIP=710 - < $< | grep -v '^#' | $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h)
$(obj)/53c7xx_u.h: $(obj)/53c7xx_d.h
$(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<
......
drivers/scsi/amiga7xx.c deleted 100644 → 0
View file @ ddc914c7
/*
* Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
* Amiga MacroSystemUS WarpEngine SCSI controller.
* Amiga Technologies A4000T SCSI controller.
* Amiga Technologies/DKB A4091 SCSI controller.
*
* Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
* plus modifications of the 53c7xx.c driver to support the Amiga.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/zorro.h>
#include <linux/stat.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "53c7xx.h"
#include "amiga7xx.h"
static int amiga7xx_register_one(struct scsi_host_template *tpnt,
unsigned long address)
{
long long options;
int clock;
if (!request_mem_region(address, 0x1000, "ncr53c710"))
return 0;
address = (unsigned long)z_ioremap(address, 0x1000);
options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 | OPTION_INTFLY |
OPTION_SYNCHRONOUS | OPTION_ALWAYS_SYNCHRONOUS |
OPTION_DISCONNECT;
clock = 50000000; /* 50 MHz SCSI Clock */
ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS, DMA_NONE,
options, clock);
return 1;
}
#ifdef CONFIG_ZORRO
static struct {
zorro_id id;
unsigned long offset;
int absolute; /* offset is absolute address */
} amiga7xx_table[] = {
{ .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS, .offset = 0xf40000,
.absolute = 1 },
{ .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx, .offset = 0x40000 },
{ .id = ZORRO_PROD_CBM_A4091_1, .offset = 0x800000 },
{ .id = ZORRO_PROD_CBM_A4091_2, .offset = 0x800000 },
{ .id = ZORRO_PROD_GVP_GFORCE_040_060, .offset = 0x40000 },
{ 0 }
};
static int __init amiga7xx_zorro_detect(struct scsi_host_template *tpnt)
{
int num = 0, i;
struct zorro_dev *z = NULL;
unsigned long address;
while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
for (i = 0; amiga7xx_table[i].id; i++)
if (z->id == amiga7xx_table[i].id)
break;
if (!amiga7xx_table[i].id)
continue;
if (amiga7xx_table[i].absolute)
address = amiga7xx_table[i].offset;
else
address = z->resource.start + amiga7xx_table[i].offset;
num += amiga7xx_register_one(tpnt, address);
}
return num;
}
#endif /* CONFIG_ZORRO */
int __init amiga7xx_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
int num = 0;
if (called || !MACH_IS_AMIGA)
return 0;
tpnt->proc_name = "Amiga7xx";
if (AMIGAHW_PRESENT(A4000_SCSI))
num += amiga7xx_register_one(tpnt, 0xdd0040);
#ifdef CONFIG_ZORRO
num += amiga7xx_zorro_detect(tpnt);
#endif
called = 1;
return num;
}
static int amiga7xx_release(struct Scsi_Host *shost)
{
if (shost->irq)
free_irq(shost->irq, NULL);
if (shost->dma_channel != 0xff)
free_dma(shost->dma_channel);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
return 0;
}
static struct scsi_host_template driver_template = {
.name = "Amiga NCR53c710 SCSI",
.detect = amiga7xx_detect,
.release = amiga7xx_release,
.queuecommand = NCR53c7xx_queue_command,
.abort = NCR53c7xx_abort,
.reset = NCR53c7xx_reset,
.can_queue = 24,
.this_id = 7,
.sg_tablesize = 63,
.cmd_per_lun = 3,
.use_clustering = DISABLE_CLUSTERING
};
#include "scsi_module.c"
drivers/scsi/amiga7xx.h deleted 100644 → 0
View file @ ddc914c7
#ifndef AMIGA7XX_H
#include <linux/types.h>
int amiga7xx_detect(struct scsi_host_template *);
const char *NCR53c7x0_info(void);
int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int NCR53c7xx_abort(Scsi_Cmnd *);
int NCR53c7x0_release (struct Scsi_Host *);
int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
void NCR53c7x0_intr(int irq, void *dev_id);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 3
#endif
#ifndef CAN_QUEUE
#define CAN_QUEUE 24
#endif
#include <scsi/scsicam.h>
#endif /* AMIGA7XX_H */
drivers/scsi/bvme6000.c deleted 100644 → 0
View file @ ddc914c7
/*
* Detection routine for the NCR53c710 based BVME6000 SCSI Controllers for Linux.
*
* Based on work by Alan Hourihane
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/zorro.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/bvme6000hw.h>
#include <asm/irq.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "53c7xx.h"
#include "bvme6000.h"
#include<linux/stat.h>
int bvme6000_scsi_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
int clock;
long long options;
if (called)
return 0;
if (!MACH_IS_BVME6000)
return 0;
tpnt->proc_name = "BVME6000";
options = OPTION_MEMORY_MAPPED|OPTION_DEBUG_TEST1|OPTION_INTFLY|OPTION_SYNCHRONOUS|OPTION_ALWAYS_SYNCHRONOUS|OPTION_DISCONNECT;
clock = 40000000; /* 66MHz SCSI Clock */
ncr53c7xx_init(tpnt, 0, 710, (unsigned long)BVME_NCR53C710_BASE,
0, BVME_IRQ_SCSI, DMA_NONE,
options, clock);
called = 1;
return 1;
}
static int bvme6000_scsi_release(struct Scsi_Host *shost)
{
if (shost->irq)
free_irq(shost->irq, NULL);
if (shost->dma_channel != 0xff)
free_dma(shost->dma_channel);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
return 0;
}
static struct scsi_host_template driver_template = {
.name = "BVME6000 NCR53c710 SCSI",
.detect = bvme6000_scsi_detect,
.release = bvme6000_scsi_release,
.queuecommand = NCR53c7xx_queue_command,
.abort = NCR53c7xx_abort,
.reset = NCR53c7xx_reset,
.can_queue = 24,
.this_id = 7,
.sg_tablesize = 63,
.cmd_per_lun = 3,
.use_clustering = DISABLE_CLUSTERING
};
#include "scsi_module.c"
drivers/scsi/bvme6000.h deleted 100644 → 0
View file @ ddc914c7
#ifndef BVME6000_SCSI_H
#define BVME6000_SCSI_H
#include <linux/types.h>
int bvme6000_scsi_detect(struct scsi_host_template *);
const char *NCR53c7x0_info(void);
int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int NCR53c7xx_abort(Scsi_Cmnd *);
int NCR53c7x0_release (struct Scsi_Host *);
int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
void NCR53c7x0_intr(int irq, void *dev_id);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 3
#endif
#ifndef CAN_QUEUE
#define CAN_QUEUE 24
#endif
#include <scsi/scsicam.h>
#endif /* BVME6000_SCSI_H */
drivers/scsi/mvme16x.c deleted 100644 → 0
View file @ ddc914c7
/*
* Detection routine for the NCR53c710 based MVME16x SCSI Controllers for Linux.
*
* Based on work by Alan Hourihane
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/mvme16xhw.h>
#include <asm/irq.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "53c7xx.h"
#include "mvme16x.h"
#include<linux/stat.h>
int mvme16x_scsi_detect(struct scsi_host_template *tpnt)
{
static unsigned char called = 0;
int clock;
long long options;
if (!MACH_IS_MVME16x)
return 0;
if (mvme16x_config & MVME16x_CONFIG_NO_SCSICHIP) {
printk ("SCSI detection disabled, SCSI chip not present\n");
return 0;
}
if (called)
return 0;
tpnt->proc_name = "MVME16x";
options = OPTION_MEMORY_MAPPED|OPTION_DEBUG_TEST1|OPTION_INTFLY|OPTION_SYNCHRONOUS|OPTION_ALWAYS_SYNCHRONOUS|OPTION_DISCONNECT;
clock = 66000000; /* 66MHz SCSI Clock */
ncr53c7xx_init(tpnt, 0, 710, (unsigned long)0xfff47000,
0, MVME16x_IRQ_SCSI, DMA_NONE,
options, clock);
called = 1;
return 1;
}
static int mvme16x_scsi_release(struct Scsi_Host *shost)
{
if (shost->irq)
free_irq(shost->irq, NULL);
if (shost->dma_channel != 0xff)
free_dma(shost->dma_channel);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
return 0;
}
static struct scsi_host_template driver_template = {
.name = "MVME16x NCR53c710 SCSI",
.detect = mvme16x_scsi_detect,
.release = mvme16x_scsi_release,
.queuecommand = NCR53c7xx_queue_command,
.abort = NCR53c7xx_abort,
.reset = NCR53c7xx_reset,
.can_queue = 24,
.this_id = 7,
.sg_tablesize = 63,
.cmd_per_lun = 3,
.use_clustering = DISABLE_CLUSTERING
};
#include "scsi_module.c"
drivers/scsi/mvme16x.h deleted 100644 → 0
View file @ ddc914c7
#ifndef MVME16x_SCSI_H
#define MVME16x_SCSI_H
#include <linux/types.h>
int mvme16x_scsi_detect(struct scsi_host_template *);
const char *NCR53c7x0_info(void);
int NCR53c7xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int NCR53c7xx_abort(Scsi_Cmnd *);
int NCR53c7x0_release (struct Scsi_Host *);
int NCR53c7xx_reset(Scsi_Cmnd *, unsigned int);
void NCR53c7x0_intr(int irq, void *dev_id);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 3
#endif
#ifndef CAN_QUEUE
#define CAN_QUEUE 24
#endif
#include <scsi/scsicam.h>
#endif /* MVME16x_SCSI_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7