[media] v4l: s5p-tv: add sii9234 driver

SiI9234 is a converter of HDMI signal into MHL. The chip is present on some
boards from Samsung S5P family. The chip's configuration procedure is based on
MHD_SiI9234 driver created by doonsoo45.kim.

The driver is using:
- i2c framework
- v4l2 framework
- runtime PM
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/s5p-tv/Kconfig

@@ -46,6 +46,16 @@ config VIDEO_SAMSUNG_S5P_HDMIPHY
 	  as module. It is an I2C driver, that exposes a V4L2
 	  subdev for use by other drivers.
 
+config VIDEO_SAMSUNG_S5P_SII9234
+	tristate "Samsung SII9234 Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2 && I2C
+	depends on VIDEO_SAMSUNG_S5P_TV
+	help
+	  Say Y here if you want support for the MHL interface
+	  in S5P Samsung SoC. The driver can be compiled
+	  as module. It is an I2C driver, that exposes a V4L2
+	  subdev for use by other drivers.
+
 config VIDEO_SAMSUNG_S5P_SDO
 	tristate "Samsung Analog TV Driver"
 	depends on VIDEO_DEV && VIDEO_V4L2

drivers/media/video/s5p-tv/Makefile

@@ -8,6 +8,8 @@
 
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o
 s5p-hdmiphy-y += hdmiphy_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SII9234) += s5p-sii9234.o
+s5p-sii9234-y += sii9234_drv.o
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o
 s5p-hdmi-y += hdmi_drv.o
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o

drivers/media/video/s5p-tv/sii9234_drv.c

+/*
+ * Samsung MHL interface driver
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/freezer.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/machine.h>
+#include <linux/slab.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+#include <media/sii9234.h>
+#include <media/v4l2-subdev.h>
+
+MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung MHL interface driver");
+MODULE_LICENSE("GPL");
+
+struct sii9234_context {
+	struct i2c_client *client;
+	struct regulator *power;
+	int gpio_n_reset;
+	struct v4l2_subdev sd;
+};
+
+static inline struct sii9234_context *sd_to_context(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct sii9234_context, sd);
+}
+
+static inline int sii9234_readb(struct i2c_client *client, int addr)
+{
+	return i2c_smbus_read_byte_data(client, addr);
+}
+
+static inline int sii9234_writeb(struct i2c_client *client, int addr, int value)
+{
+	return i2c_smbus_write_byte_data(client, addr, value);
+}
+
+static inline int sii9234_writeb_mask(struct i2c_client *client, int addr,
+	int value, int mask)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, addr);
+	if (ret < 0)
+		return ret;
+	ret = (ret & ~mask) | (value & mask);
+	return i2c_smbus_write_byte_data(client, addr, ret);
+}
+
+static inline int sii9234_readb_idx(struct i2c_client *client, int addr)
+{
+	int ret;
+	ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8);
+	if (ret < 0)
+		return ret;
+	ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff);
+	if (ret < 0)
+		return ret;
+	return i2c_smbus_read_byte_data(client, 0xbe);
+}
+
+static inline int sii9234_writeb_idx(struct i2c_client *client, int addr,
+	int value)
+{
+	int ret;
+	ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8);
+	if (ret < 0)
+		return ret;
+	ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff);
+	if (ret < 0)
+		return ret;
+	ret = i2c_smbus_write_byte_data(client, 0xbe, value);
+	return ret;
+}
+
+static inline int sii9234_writeb_idx_mask(struct i2c_client *client, int addr,
+	int value, int mask)
+{
+	int ret;
+
+	ret = sii9234_readb_idx(client, addr);
+	if (ret < 0)
+		return ret;
+	ret = (ret & ~mask) | (value & mask);
+	return sii9234_writeb_idx(client, addr, ret);
+}
+
+static int sii9234_reset(struct sii9234_context *ctx)
+{
+	struct i2c_client *client = ctx->client;
+	struct device *dev = &client->dev;
+	int ret, tries;
+
+	gpio_direction_output(ctx->gpio_n_reset, 1);
+	mdelay(1);
+	gpio_direction_output(ctx->gpio_n_reset, 0);
+	mdelay(1);
+	gpio_direction_output(ctx->gpio_n_reset, 1);
+	mdelay(1);
+
+	/* going to TTPI mode */
+	ret = sii9234_writeb(client, 0xc7, 0);
+	if (ret < 0) {
+		dev_err(dev, "failed to set TTPI mode\n");
+		return ret;
+	}
+	for (tries = 0; tries < 100 ; ++tries) {
+		ret = sii9234_readb(client, 0x1b);
+		if (ret > 0)
+			break;
+		if (ret < 0) {
+			dev_err(dev, "failed to reset device\n");
+			return -EIO;
+		}
+		mdelay(1);
+	}
+	if (tries == 100) {
+		dev_err(dev, "maximal number of tries reached\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int sii9234_verify_version(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	int family, rev, tpi_rev, dev_id, sub_id, hdcp, id;
+
+	family = sii9234_readb(client, 0x1b);
+	rev = sii9234_readb(client, 0x1c) & 0x0f;
+	tpi_rev = sii9234_readb(client, 0x1d) & 0x7f;
+	dev_id = sii9234_readb_idx(client, 0x0103);
+	sub_id = sii9234_readb_idx(client, 0x0102);
+	hdcp = sii9234_readb(client, 0x30);
+
+	if (family < 0 || rev < 0 || tpi_rev < 0 || dev_id < 0 ||
+		sub_id < 0 || hdcp < 0) {
+		dev_err(dev, "failed to read chip's version\n");
+		return -EIO;
+	}
+
+	id = (dev_id << 8) | sub_id;
+
+	dev_info(dev, "chip: SiL%02x family: %02x, rev: %02x\n",
+		id, family, rev);
+	dev_info(dev, "tpi_rev:%02x, hdcp: %02x\n", tpi_rev, hdcp);
+	if (id != 0x9234) {
+		dev_err(dev, "not supported chip\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static u8 data[][3] = {
+/* setup from driver created by doonsoo45.kim */
+	{ 0x01, 0x05, 0x04 }, /* Enable Auto soft reset on SCDT = 0 */
+	{ 0x01, 0x08, 0x35 }, /* Power Up TMDS Tx Core */
+	{ 0x01, 0x0d, 0x1c }, /* HDMI Transcode mode enable */
+	{ 0x01, 0x2b, 0x01 }, /* Enable HDCP Compliance workaround */
+	{ 0x01, 0x79, 0x40 }, /* daniel test...MHL_INT */
+	{ 0x01, 0x80, 0x34 }, /* Enable Rx PLL Clock Value */
+	{ 0x01, 0x90, 0x27 }, /* Enable CBUS discovery */
+	{ 0x01, 0x91, 0xe5 }, /* Skip RGND detection */
+	{ 0x01, 0x92, 0x46 }, /* Force MHD mode */
+	{ 0x01, 0x93, 0xdc }, /* Disable CBUS pull-up during RGND measurement */
+	{ 0x01, 0x94, 0x66 }, /* 1.8V CBUS VTH & GND threshold */
+	{ 0x01, 0x95, 0x31 }, /* RGND block & single discovery attempt */
+	{ 0x01, 0x96, 0x22 }, /* use 1K and 2K setting */
+	{ 0x01, 0xa0, 0x10 }, /* SIMG: Term mode */
+	{ 0x01, 0xa1, 0xfc }, /* Disable internal Mobile HD driver */
+	{ 0x01, 0xa3, 0xfa }, /* SIMG: Output Swing  default EB, 3x Clk Mult */
+	{ 0x01, 0xa5, 0x80 }, /* SIMG: RGND Hysterisis, 3x mode for Beast */
+	{ 0x01, 0xa6, 0x0c }, /* SIMG: Swing Offset */
+	{ 0x02, 0x3d, 0x3f }, /* Power up CVCC 1.2V core */
+	{ 0x03, 0x00, 0x00 }, /* SIMG: correcting HW default */
+	{ 0x03, 0x11, 0x01 }, /* Enable TxPLL Clock */
+	{ 0x03, 0x12, 0x15 }, /* Enable Tx Clock Path & Equalizer */
+	{ 0x03, 0x13, 0x60 }, /* SIMG: Set termination value */
+	{ 0x03, 0x14, 0xf0 }, /* SIMG: Change CKDT level */
+	{ 0x03, 0x17, 0x07 }, /* SIMG: PLL Calrefsel */
+	{ 0x03, 0x1a, 0x20 }, /* VCO Cal */
+	{ 0x03, 0x22, 0xe0 }, /* SIMG: Auto EQ */
+	{ 0x03, 0x23, 0xc0 }, /* SIMG: Auto EQ */
+	{ 0x03, 0x24, 0xa0 }, /* SIMG: Auto EQ */
+	{ 0x03, 0x25, 0x80 }, /* SIMG: Auto EQ */
+	{ 0x03, 0x26, 0x60 }, /* SIMG: Auto EQ */
+	{ 0x03, 0x27, 0x40 }, /* SIMG: Auto EQ */
+	{ 0x03, 0x28, 0x20 }, /* SIMG: Auto EQ */
+	{ 0x03, 0x29, 0x00 }, /* SIMG: Auto EQ */
+	{ 0x03, 0x31, 0x0b }, /* SIMG: Rx PLL BW value from I2C BW ~ 4MHz */
+	{ 0x03, 0x45, 0x06 }, /* SIMG: DPLL Mode */
+	{ 0x03, 0x4b, 0x06 }, /* SIMG: Correcting HW default */
+	{ 0x03, 0x4c, 0xa0 }, /* Manual zone control */
+	{ 0x03, 0x4d, 0x02 }, /* SIMG: PLL Mode Value (order is important) */
+};
+
+static int sii9234_set_internal(struct sii9234_context *ctx)
+{
+	struct i2c_client *client = ctx->client;
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(data); ++i) {
+		int addr = (data[i][0] << 8) | data[i][1];
+		ret = sii9234_writeb_idx(client, addr, data[i][2]);
+		if (ret < 0)
+			return ret;
+	}
+	return 0;
+}
+
+static int sii9234_runtime_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct sii9234_context *ctx = sd_to_context(sd);
+	struct i2c_client *client = ctx->client;
+
+	dev_info(dev, "suspend start\n");
+
+	sii9234_writeb_mask(client, 0x1e, 3, 3);
+	regulator_disable(ctx->power);
+
+	return 0;
+}
+
+static int sii9234_runtime_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct sii9234_context *ctx = sd_to_context(sd);
+	struct i2c_client *client = ctx->client;
+	int ret;
+
+	dev_info(dev, "resume start\n");
+	regulator_enable(ctx->power);
+
+	ret = sii9234_reset(ctx);
+	if (ret)
+		goto fail;
+
+	/* enable tpi */
+	ret = sii9234_writeb_mask(client, 0x1e, 1, 0);
+	if (ret < 0)
+		goto fail;
+	ret = sii9234_set_internal(ctx);
+	if (ret < 0)
+		goto fail;
+
+	return 0;
+
+fail:
+	dev_err(dev, "failed to resume\n");
+	regulator_disable(ctx->power);
+
+	return ret;
+}
+
+static const struct dev_pm_ops sii9234_pm_ops = {
+	.runtime_suspend = sii9234_runtime_suspend,
+	.runtime_resume	 = sii9234_runtime_resume,
+};
+
+static int sii9234_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct sii9234_context *ctx = sd_to_context(sd);
+	int ret;
+
+	if (on)
+		ret = pm_runtime_get_sync(&ctx->client->dev);
+	else
+		ret = pm_runtime_put(&ctx->client->dev);
+	/* only values < 0 indicate errors */
+	return IS_ERR_VALUE(ret) ? ret : 0;
+}
+
+static int sii9234_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct sii9234_context *ctx = sd_to_context(sd);
+
+	/* (dis/en)able TDMS output */
+	sii9234_writeb_mask(ctx->client, 0x1a, enable ? 0 : ~0 , 1 << 4);
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops sii9234_core_ops = {
+	.s_power =  sii9234_s_power,
+};
+
+static const struct v4l2_subdev_video_ops sii9234_video_ops = {
+	.s_stream =  sii9234_s_stream,
+};
+
+static const struct v4l2_subdev_ops sii9234_ops = {
+	.core = &sii9234_core_ops,
+	.video = &sii9234_video_ops,
+};
+
+static int __devinit sii9234_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct sii9234_platform_data *pdata = dev->platform_data;
+	struct sii9234_context *ctx;
+	int ret;
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx) {
+		dev_err(dev, "out of memory\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+	ctx->client = client;
+
+	ctx->power = regulator_get(dev, "hdmi-en");
+	if (IS_ERR(ctx->power)) {
+		dev_err(dev, "failed to acquire regulator hdmi-en\n");
+		ret = PTR_ERR(ctx->power);
+		goto fail_ctx;
+	}
+
+	ctx->gpio_n_reset = pdata->gpio_n_reset;
+	ret = gpio_request(ctx->gpio_n_reset, "MHL_RST");
+	if (ret) {
+		dev_err(dev, "failed to acquire MHL_RST gpio\n");
+		goto fail_power;
+	}
+
+	v4l2_i2c_subdev_init(&ctx->sd, client, &sii9234_ops);
+
+	pm_runtime_enable(dev);
+
+	/* enable device */
+	ret = pm_runtime_get_sync(dev);
+	if (ret)
+		goto fail_pm;
+
+	/* verify chip version */
+	ret = sii9234_verify_version(client);
+	if (ret)
+		goto fail_pm_get;
+
+	/* stop processing */
+	pm_runtime_put(dev);
+
+	dev_info(dev, "probe successful\n");
+
+	return 0;
+
+fail_pm_get:
+	pm_runtime_put_sync(dev);
+
+fail_pm:
+	pm_runtime_disable(dev);
+	gpio_free(ctx->gpio_n_reset);
+
+fail_power:
+	regulator_put(ctx->power);
+
+fail_ctx:
+	kfree(ctx);
+
+fail:
+	dev_err(dev, "probe failed\n");
+
+	return ret;
+}
+
+static int __devexit sii9234_remove(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct sii9234_context *ctx = sd_to_context(sd);
+
+	pm_runtime_disable(dev);
+	gpio_free(ctx->gpio_n_reset);
+	regulator_put(ctx->power);
+	kfree(ctx);
+
+	dev_info(dev, "remove successful\n");
+
+	return 0;
+}
+
+
+static const struct i2c_device_id sii9234_id[] = {
+	{ "SII9234", 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, sii9234_id);
+static struct i2c_driver sii9234_driver = {
+	.driver = {
+		.name	= "sii9234",
+		.owner	= THIS_MODULE,
+		.pm = &sii9234_pm_ops,
+	},
+	.probe		= sii9234_probe,
+	.remove		= __devexit_p(sii9234_remove),
+	.id_table = sii9234_id,
+};
+
+static int __init sii9234_init(void)
+{
+	return i2c_add_driver(&sii9234_driver);
+}
+module_init(sii9234_init);
+
+static void __exit sii9234_exit(void)
+{
+	i2c_del_driver(&sii9234_driver);
+}
+module_exit(sii9234_exit);

include/media/sii9234.h

+/*
+ * Driver header for SII9234 MHL converter chip.
+ *
+ * Copyright (c) 2011 Samsung Electronics, Co. Ltd
+ * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SII9234_H
+#define SII9234_H
+
+/**
+ * @gpio_n_reset: GPIO driving nRESET pin
+ */
+
+struct sii9234_platform_data {
+	int gpio_n_reset;
+};
+
+#endif /* SII9234_H */