Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...

Documentation/arm/microchip.rst

@@ -192,7 +192,7 @@ Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards ar
 considered as "Unstable". To be completely clear, any at91 binding can change at
 any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from
 the same source tree.
-Please refer to the Documentation/devicetree/bindings/ABI.txt file for a
+Please refer to the Documentation/devicetree/bindings/ABI.rst file for a
 definition of a "Stable" binding/ABI.
 This statement will be removed by AT91 MAINTAINERS when appropriate.
 

Documentation/devicetree/bindings/ABI.txt → Documentation/devicetree/bindings/ABI.rst

+.. SPDX-License-Identifier: GPL-2.0
 
-  Devicetree (DT) ABI
+===================
+Devicetree (DT) ABI
+===================
 
 I. Regarding stable bindings/ABI, we quote from the 2013 ARM mini-summit
    summary document:

Documentation/devicetree/bindings/Makefile

@@ -4,11 +4,19 @@ DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
 DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
 
+DT_SCHEMA_MIN_VERSION = 2020.5
+
+PHONY += check_dtschema_version
+check_dtschema_version:
+	@{ echo $(DT_SCHEMA_MIN_VERSION); \
+	$(DT_DOC_CHECKER) --version 2>/dev/null || echo 0; } | sort -VC || \
+	{ echo "ERROR: dtschema minimum version is v$(DT_SCHEMA_MIN_VERSION)" >&2; false; }
+
 quiet_cmd_chk_binding = CHKDT   $(patsubst $(srctree)/%,%,$<)
       cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
                         $(DT_EXTRACT_EX) $< > $@
 
-$(obj)/%.example.dts: $(src)/%.yaml FORCE
+$(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
 	$(call if_changed,chk_binding)
 
 # Use full schemas when checking %.example.dts
@@ -37,11 +45,11 @@ override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
 	-Wno-graph_child_address
 
-$(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE
+$(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
 $(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
-$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE
+$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
 extra-y += processed-schema.yaml

Documentation/devicetree/bindings/arm/amlogic.yaml

@@ -17,7 +17,7 @@ description: |+
   any time. Be sure to use a device tree binary and a kernel image
   generated from the same source tree.
 
-  Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+  Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
   stable binding/ABI.
 
 properties:

Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml

@@ -131,25 +131,22 @@ properties:
       property, describing the physical location of the children nodes.
       0 means motherboard site, while 1 and 2 are daughterboard sites, and
       0xf means "sisterboard" which is the site containing the main CPU tile.
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/uint32'
-      - minimum: 0
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    minimum: 0
     maximum: 15
 
   arm,vexpress,position:
     description: When daughterboards are stacked on one site, their position
       in the stack be be described this attribute.
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/uint32'
-      - minimum: 0
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    minimum: 0
     maximum: 3
 
   arm,vexpress,dcc:
     description: When describing tiles consisting of more than one DCC, its
       number can be specified with this attribute.
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/uint32'
-      - minimum: 0
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    minimum: 0
     maximum: 3
 
 patternProperties:
@@ -162,8 +159,7 @@ patternProperties:
       "simple-bus". If the compatible is placed in the "motherboard" node,
       it is stricter and always has two compatibles.
     type: object
-    allOf:
-      - $ref: '/schemas/simple-bus.yaml'
+    $ref: '/schemas/simple-bus.yaml'
 
     properties:
       compatible:
@@ -195,11 +191,11 @@ patternProperties:
               - const: simple-bus
           arm,v2m-memory-map:
             description: This describes the memory map type.
-            allOf:
-              - $ref: '/schemas/types.yaml#/definitions/string'
-              - enum:
+            $ref: '/schemas/types.yaml#/definitions/string'
+            enum:
               - rs1
               - rs2
+
         required:
           - compatible
     required:

Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda/hb-sregs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank system registers
+
+description: |
+  The Calxeda Highbank system has a block of MMIO registers controlling
+  several generic system aspects. Those can be used to control some power
+  management, they also contain some gate and PLL clocks.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-sregs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@fff3c000 {
+        compatible = "calxeda,hb-sregs";
+        reg = <0xfff3c000 0x1000>;
+
+        clocks {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            osc: oscillator {
+                #clock-cells = <0>;
+                compatible = "fixed-clock";
+                clock-frequency = <33333000>;
+            };
+        };
+    };

Documentation/devicetree/bindings/arm/calxeda/l2ecc.txt

-Calxeda Highbank L2 cache ECC
-
-Properties:
-- compatible : Should be "calxeda,hb-sregs-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt.
-
-Example:
-
-	sregs@fff3c200 {
-		compatible = "calxeda,hb-sregs-l2-ecc";
-		reg = <0xfff3c200 0x100>;
-		interrupts = <0 71 4  0 72 4>;
-	};

Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda/l2ecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank L2 cache ECC
+
+description: |
+  Binding for the Calxeda Highbank L2 cache controller ECC device.
+  This does not cover the actual L2 cache controller control registers,
+  but just the error reporting functionality.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: "calxeda,hb-sregs-l2-ecc"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: single bit error interrupt
+      - description: double bit error interrupt
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@fff3c200 {
+        compatible = "calxeda,hb-sregs-l2-ecc";
+        reg = <0xfff3c200 0x100>;
+        interrupts = <0 71 4>, <0 72 4>;
+    };

Documentation/devicetree/bindings/arm/coresight-cti.yaml

@@ -140,16 +140,14 @@ patternProperties:
         maxItems: 1
 
       arm,trig-in-sigs:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 32
         description:
           List of CTI trigger in signal numbers in use by a trig-conns node.
 
       arm,trig-in-types:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 32
         description:
@@ -159,16 +157,14 @@ patternProperties:
           completely, then the types will default to GEN_IO.
 
       arm,trig-out-sigs:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 32
         description:
           List of CTI trigger out signal numbers in use by a trig-conns node.
 
       arm,trig-out-types:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 32
         description:
@@ -178,8 +174,7 @@ patternProperties:
           or omitted completely, then the types will default to GEN_IO.
 
       arm,trig-filters:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 32
         description:
@@ -187,8 +182,7 @@ patternProperties:
           active, unless filtering is disabled on the driver.
 
       arm,trig-conn-name:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
+        $ref: /schemas/types.yaml#/definitions/string
         description:
           Defines a connection name that will be displayed, if the cpu or
           arm,cs-dev-assoc properties are not being used in this connection.
@@ -301,7 +295,7 @@ examples:
   - |
     cti@20110000 {
       compatible = "arm,coresight-cti", "arm,primecell";
-      reg = <0 0x20110000 0 0x1000>;
+      reg = <0x20110000 0x1000>;
 
       clocks = <&soc_smc50mhz>;
       clock-names = "apb_pclk";

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -172,9 +172,8 @@ properties:
       - qcom,scorpion
 
   enable-method:
-    allOf:
-      - $ref: '/schemas/types.yaml#/definitions/string'
-      - oneOf:
+    $ref: '/schemas/types.yaml#/definitions/string'
+    oneOf:
       # On ARM v8 64-bit this property is required
       - enum:
           - psci

Documentation/devicetree/bindings/arm/l2c2x0.yaml

@@ -70,9 +70,8 @@ properties:
     description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
       read, write and setup latencies. Minimum valid values are 1. Controllers
       without setup latency control should use a value of 0.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
     maxItems: 3
     items:
       minimum: 0
@@ -83,9 +82,8 @@ properties:
       read, write and setup latencies. Controllers without setup latency control
       should use 0. Controllers without separate read and write Tag RAM latency
       values should only use the first cell.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
     maxItems: 3
     items:
       minimum: 0
@@ -93,18 +91,16 @@ properties:
 
   arm,dirty-latency:
     description: Cycles of latency for Dirty RAMs. This is a single cell.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
     maximum: 8
 
   arm,filter-ranges:
     description: <start length> Starting address and length of window to
       filter. Addresses in the filter window are directed to the M1 port. Other
       addresses will go to the M0 port.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
       minItems: 2
       maxItems: 2
 
@@ -131,36 +127,31 @@ properties:
   arm,double-linefill:
     description: Override double linefill enable setting. Enable if
       non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,double-linefill-incr:
     description: Override double linefill on INCR read. Enable
       if non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,double-linefill-wrap:
     description: Override double linefill on WRAP read. Enable
       if non-zero, disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,prefetch-drop:
     description: Override prefetch drop enable setting. Enable if non-zero,
       disable if zero.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,prefetch-offset:
     description: Override prefetch offset value.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
 
   arm,shared-override:
     description: The default behavior of the L220 or PL310 cache
@@ -193,35 +184,31 @@ properties:
     description: |
       Data prefetch. Value: <0> (forcibly disable), <1>
       (forcibly enable), property absent (retain settings set by firmware)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   prefetch-instr:
     description: |
       Instruction prefetch. Value: <0> (forcibly disable),
       <1> (forcibly enable), property absent (retain settings set by
       firmware)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,dynamic-clock-gating:
     description: |
       L2 dynamic clock gating. Value: <0> (forcibly
       disable), <1> (forcibly enable), property absent (OS specific behavior,
       preferably retain firmware settings)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,standby-mode:
     description: L2 standby mode enable. Value <0> (forcibly disable),
       <1> (forcibly enable), property absent (OS specific behavior,
       preferably retain firmware settings)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
 
   arm,early-bresp-disable:
     description: Disable the CA9 optimization Early BRESP (PL310)

Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml

@@ -21,5 +21,4 @@ properties:
               - ea,ea3250
               - phytec,phy3250
           - const: nxp,lpc3250
-
 ...

Documentation/devicetree/bindings/arm/psci.yaml

@@ -69,10 +69,8 @@ properties:
 
   method:
     description: The method of calling the PSCI firmware.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - enum:
-          # SMC #0, with the register assignments specified in this binding.
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
       - smc
       # HVC #0, with the register assignments specified in this binding.
       - hvc
@@ -107,8 +105,8 @@ properties:
 
 patternProperties:
   "^power-domain-":
-    allOf:
-      - $ref: "../power/power-domain.yaml#"
+    $ref: "../power/power-domain.yaml#"
+
     type: object
     description: |
       ARM systems can have multiple cores, sometimes in an hierarchical

Documentation/devicetree/bindings/arm/renesas,prr.yaml

@@ -33,5 +33,5 @@ examples:
   - |
     prr: chipid@ff000044 {
         compatible = "renesas,prr";
-        reg = <0 0xff000044 0 4>;
+        reg = <0xff000044 4>;
     };

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml

@@ -22,9 +22,8 @@ properties:
       Adaptive Supply Voltage bin selection. This can be used
       to determine the ASV bin of an SoC if respective information
       is missing in the CHIPID registers or in the OTP memory.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 1, 2, 3 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
 
 required:
   - compatible

Documentation/devicetree/bindings/arm/syna.txt

@@ -13,7 +13,7 @@ considered "unstable". Any Marvell Berlin device tree binding may change at any
 time. Be sure to use a device tree binary and a kernel image generated from the
 same source tree.
 
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
 stable binding/ABI.
 
 ---------------------------------------------------------------

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml

@@ -323,7 +323,7 @@ examples:
 
     tegra_pmc: pmc@7000e400 {
               compatible = "nvidia,tegra210-pmc";
-              reg = <0x0 0x7000e400 0x0 0x400>;
+              reg = <0x7000e400 0x400>;
               clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
               clock-names = "pclk", "clk32k_in";
               #clock-cells = <1>;

Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml

@@ -17,6 +17,7 @@ properties:
               - renesas,sata-r8a7779      # R-Car H1
       - items:
           - enum:
+              - renesas,sata-r8a7742      # RZ/G1H
               - renesas,sata-r8a7790-es1  # R-Car H2 ES1
               - renesas,sata-r8a7790      # R-Car H2 other than ES1
               - renesas,sata-r8a7791      # R-Car M2-W

Documentation/devicetree/bindings/ata/sata_highbank.txt

-* Calxeda AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-The Calxeda SATA controller mostly conforms to the AHCI interface
-with some special extensions to add functionality.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- reg               : <registers mapping>
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
-			SATA port to a combophy and a lane within that
-			combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
-			which indicates that the driver supports SGPIO
-			indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
-			SGPIO bitstream.
-- calxeda,tx-atten  : a u32 array that contains TX attenuation override
-			codes, one per port. The upper 3 bytes are always
-			0 and thus ignored.
-- calxeda,pre-clocks : a u32 that indicates the number of additional clock
-			cycles to transmit before sending an SGPIO pattern
-- calxeda,post-clocks: a u32 that indicates the number of additional clock
-			cycles to transmit after sending an SGPIO pattern
-
-Example:
-        sata@ffe08000 {
-		compatible = "calxeda,hb-ahci";
-		reg = <0xffe08000 0x1000>;
-		interrupts = <115>;
-		dma-coherent;
-		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
-					&combophy0 2 &combophy0 3>;
-		calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
-		calxeda,led-order = <4 0 1 2 3>;
-		calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
-		calxeda,pre-clocks = <10>;
-		calxeda,post-clocks = <0>;
-        };

Documentation/devicetree/bindings/ata/sata_highbank.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/sata_highbank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda AHCI SATA Controller
+
+description: |
+  The Calxeda SATA controller mostly conforms to the AHCI interface
+  with some special extensions to add functionality, to map GPIOs for
+  activity LEDs and for mapping the ComboPHYs.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+  calxeda,pre-clocks:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates the number of additional clock cycles to transmit before
+      sending an SGPIO pattern.
+
+  calxeda,post-clocks:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates the number of additional clock cycles to transmit after
+      sending an SGPIO pattern.
+
+  calxeda,led-order:
+    description: Maps port numbers to offsets within the SGPIO bitstream.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 8
+
+  calxeda,port-phys:
+    description: |
+      phandle-combophy and lane assignment, which maps each SATA port to a
+      combophy and a lane within that combophy
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - minItems: 1
+        maxItems: 8
+
+  calxeda,tx-atten:
+    description: |
+      Contains TX attenuation override codes, one per port.
+      The upper 24 bits of each entry are always 0 and thus ignored.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 8
+
+  calxeda,sgpio-gpio:
+    description: |
+      phandle-gpio bank, bit offset, and default on or off, which indicates
+      that the driver supports SGPIO indicator lights using the indicated
+      GPIOs.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sata@ffe08000 {
+        compatible = "calxeda,hb-ahci";
+        reg = <0xffe08000 0x1000>;
+        interrupts = <115>;
+        dma-coherent;
+        calxeda,port-phys = <&combophy5 0>, <&combophy0 0>, <&combophy0 1>,
+                             <&combophy0 2>, <&combophy0 3>;
+        calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>;
+        calxeda,led-order = <4 0 1 2 3>;
+        calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
+        calxeda,pre-clocks = <10>;
+        calxeda,post-clocks = <0>;
+    };
+
+...

Documentation/devicetree/bindings/auxdisplay/hit,hd44780.txt

-DT bindings for the Hitachi HD44780 Character LCD Controller
-
-The Hitachi HD44780 Character LCD Controller is commonly used on character LCDs
-that can display one or more lines of text. It exposes an M6800 bus interface,
-which can be used in either 4-bit or 8-bit mode.
-
-Required properties:
-  - compatible: Must contain "hit,hd44780",
-  - data-gpios: Must contain an array of either 4 or 8 GPIO specifiers,
-    referring to the GPIO pins connected to the data signal lines DB0-DB7
-    (8-bit mode) or DB4-DB7 (4-bit mode) of the LCD Controller's bus interface,
-  - enable-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "E" (Enable) signal line of the LCD Controller's bus
-    interface,
-  - rs-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "RS" (Register Select) signal line of the LCD Controller's
-    bus interface,
-  - display-height-chars: Height of the display, in character cells,
-  - display-width-chars: Width of the display, in character cells.
-
-Optional properties:
-  - rw-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    connected to the "RW" (Read/Write) signal line of the LCD Controller's bus
-    interface,
-  - backlight-gpios: Must contain a GPIO specifier, referring to the GPIO pin
-    used for enabling the LCD's backlight,
-  - internal-buffer-width: Internal buffer width (default is 40 for displays
-    with 1 or 2 lines, and display-width-chars for displays with more than 2
-    lines).
-
-Example:
-
-	auxdisplay {
-		compatible = "hit,hd44780";
-
-		data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
-			     <&hc595 1 GPIO_ACTIVE_HIGH>,
-			     <&hc595 2 GPIO_ACTIVE_HIGH>,
-			     <&hc595 3 GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-		rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-
-		display-height-chars = <2>;
-		display-width-chars = <16>;
-	};

Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hitachi HD44780 Character LCD Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+
+description:
+  The Hitachi HD44780 Character LCD Controller is commonly used on character
+  LCDs that can display one or more lines of text. It exposes an M6800 bus
+  interface, which can be used in either 4-bit or 8-bit mode.
+
+properties:
+  compatible:
+    const: hit,hd44780
+
+  data-gpios:
+    description:
+      GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or
+      DB4-DB7 (4-bit mode) of the LCD Controller's bus interface.
+    oneOf:
+      - maxItems: 4
+      - maxItems: 8
+
+  enable-gpios:
+    description:
+      GPIO pin connected to the "E" (Enable) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  rs-gpios:
+    description:
+      GPIO pin connected to the "RS" (Register Select) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  rw-gpios:
+    description:
+      GPIO pin connected to the "RW" (Read/Write) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  backlight-gpios:
+    description: GPIO pin used for enabling the LCD's backlight.
+    maxItems: 1
+
+  display-height-chars:
+    description: Height of the display, in character cells,
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+
+  display-width-chars:
+    description: Width of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 64
+
+  internal-buffer-width:
+    description:
+      Internal buffer width (default is 40 for displays with 1 or 2 lines, and
+      display-width-chars for displays with more than 2 lines).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 64
+
+required:
+  - compatible
+  - data-gpios
+  - enable-gpios
+  - rs-gpios
+  - display-height-chars
+  - display-width-chars
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    auxdisplay {
+            compatible = "hit,hd44780";
+
+            data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                         <&hc595 1 GPIO_ACTIVE_HIGH>,
+                         <&hc595 2 GPIO_ACTIVE_HIGH>,
+                         <&hc595 3 GPIO_ACTIVE_HIGH>;
+            enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+            rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+            display-height-chars = <2>;
+            display-width-chars = <16>;
+    };

Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml

@@ -31,12 +31,11 @@ properties:
     maxItems: 1
 
   allwinner,sram:
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/phandle-array
-      - maxItems: 1
     description:
       The SRAM that needs to be claimed to access the display engine
       bus.
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    maxItems: 1
 
   ranges: true
 

Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml

@@ -65,7 +65,7 @@ examples:
   - |
     uart0: serial@58018000 {
          compatible = "snps,dw-apb-uart";
-         reg = <0x0 0x58018000 0x0 0x2000>;
+         reg = <0x58018000 0x2000>;
          clocks = <&clk 45>, <&clk 46>;
          clock-names = "baudclk", "apb_pclk";
          interrupts = <0 9 4>;

Documentation/devicetree/bindings/clock/calxeda.txt

-Device Tree Clock bindings for Calxeda highbank platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"calxeda,hb-pll-clock" - for a PLL clock
-	"calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
-		A9 clock.
-	"calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
-	"calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
-- reg : shall be the control register offset from SYSREGs base for the clock.
-- clocks : shall be the input parent clock phandle for the clock. This is
-	either an oscillator or a pll output.
-- #clock-cells : from common clock binding; shall be set to 0.

Documentation/devicetree/bindings/clock/calxeda.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Clock bindings for Calxeda highbank platform
+
+description: |
+  This binding covers the Calxeda SoC internal peripheral and bus clocks
+  as used by peripherals. The clocks live inside the "system register"
+  region of the SoC, so are typically presented as children of an
+  "hb-sregs" node.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - calxeda,hb-pll-clock
+      - calxeda,hb-a9periph-clock
+      - calxeda,hb-a9bus-clock
+      - calxeda,hb-emmc-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@3fffc000 {
+        compatible = "calxeda,hb-sregs";
+        reg = <0x3fffc000 0x1000>;
+
+        clocks {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            osc: oscillator {
+                #clock-cells = <0>;
+                compatible = "fixed-clock";
+                clock-frequency = <33333000>;
+            };
+
+            ddrpll: ddrpll@108 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-pll-clock";
+                clocks = <&osc>;
+                reg = <0x108>;
+            };
+
+            a9pll: a9pll@100 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-pll-clock";
+                clocks = <&osc>;
+                reg = <0x100>;
+            };
+
+            a9periphclk: a9periphclk@104 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-a9periph-clock";
+                clocks = <&a9pll>;
+                reg = <0x104>;
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt

-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the clock portion of
-the driver.
-
-Also see these documents for generic binding information:
-  [1] Clock : ../clock/clock-bindings.txt
-
-And these for relevant defines:
-  [2] include/dt-bindings/clock/lochnagar.h
-
-This binding must be part of the Lochnagar MFD binding:
-  [3] ../mfd/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar1-clk"
-                 "cirrus,lochnagar2-clk"
-
-  - #clock-cells : Must be 1. The first cell indicates the clock
-    number, see [2] for available clocks and [1].
-
-Optional properties:
-
-  - clocks : Must contain an entry for each clock in clock-names.
-  - clock-names : May contain entries for each of the following
-    clocks:
-     - ln-cdc-clkout : Output clock from CODEC card.
-     - ln-dsp-clkout : Output clock from DSP card.
-     - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
-       input audio clocks from host system.
-     - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
-       external connector.
-     - ln-spdif-mclk : Optional input audio clock from SPDIF.
-     - ln-spdif-clkout : Optional input audio clock from SPDIF.
-     - ln-adat-mclk : Optional input audio clock from ADAT.
-     - ln-pmic-32k : On board fixed clock.
-     - ln-clk-12m : On board fixed clock.
-     - ln-clk-11m : On board fixed clock.
-     - ln-clk-24m : On board fixed clock.
-     - ln-clk-22m : On board fixed clock.
-     - ln-clk-8m : On board fixed clock.
-     - ln-usb-clk-24m : On board fixed clock.
-     - ln-usb-clk-12m : On board fixed clock.
-
-  - assigned-clocks : A list of Lochnagar clocks to be reparented, see
-    [2] for available clocks.
-  - assigned-clock-parents : Parents to be assigned to the clocks
-    listed in "assigned-clocks".
-
-Optional nodes:
-
-  - fixed-clock nodes may be registered for the following on board clocks:
-     - ln-pmic-32k : 32768 Hz
-     - ln-clk-12m : 12288000 Hz
-     - ln-clk-11m : 11298600 Hz
-     - ln-clk-24m : 24576000 Hz
-     - ln-clk-22m : 22579200 Hz
-     - ln-clk-8m : 8192000 Hz
-     - ln-usb-clk-24m : 24576000 Hz
-     - ln-usb-clk-12m : 12288000 Hz
-
-Example:
-
-lochnagar {
-	lochnagar-clk {
-		compatible = "cirrus,lochnagar2-clk";
-
-		#clock-cells = <1>;
-
-		clocks = <&clk-audio>, <&clk_pmic>;
-		clock-names = "ln-gf-mclk2", "ln-pmic-32k";
-
-		assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
-				  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
-		assigned-clock-parents = <&clk-audio>,
-					 <&clk-pmic>;
-	};
-
-	clk-pmic: clk-pmic {
-		compatible = "fixed-clock";
-		clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-};

Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the clock portion of the
+  driver.
+
+  Also see these documents for generic binding information:
+    [1] Clock : ../clock/clock-bindings.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/clock/lochnagar.h
+
+  This binding must be part of the Lochnagar MFD binding:
+    [3] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1-clk
+      - cirrus,lochnagar2-clk
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number, see [2] for available
+      clocks and [1].
+    const: 1
+
+  clock-names:
+    items:
+      enum:
+        - ln-cdc-clkout # Output clock from CODEC card.
+        - ln-dsp-clkout # Output clock from DSP card.
+        - ln-gf-mclk1 # Optional input clock from host system.
+        - ln-gf-mclk2 # Optional input clock from host system.
+        - ln-gf-mclk3 # Optional input clock from host system.
+        - ln-gf-mclk4 # Optional input clock from host system.
+        - ln-psia1-mclk # Optional input clock from external connector.
+        - ln-psia2-mclk # Optional input clock from external connector.
+        - ln-spdif-mclk # Optional input clock from SPDIF.
+        - ln-spdif-clkout # Optional input clock from SPDIF.
+        - ln-adat-mclk # Optional input clock from ADAT.
+        - ln-pmic-32k # On board fixed clock.
+        - ln-clk-12m # On board fixed clock.
+        - ln-clk-11m # On board fixed clock.
+        - ln-clk-24m # On board fixed clock.
+        - ln-clk-22m # On board fixed clock.
+        - ln-clk-8m # On board fixed clock.
+        - ln-usb-clk-24m # On board fixed clock.
+        - ln-usb-clk-12m # On board fixed clock.
+    minItems: 1
+    maxItems: 19
+
+  clocks: true
+  assigned-clocks: true
+  assigned-clock-parents: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#clock-cells'

Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml

@@ -24,9 +24,8 @@ properties:
 
   clock-div:
     description: Fixed divider
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
 
   clock-mult:
     description: Fixed multiplier

Documentation/devicetree/bindings/clock/fsl,plldig.yaml

@@ -28,12 +28,11 @@ properties:
     const: 0
 
   fsl,vco-hz:
-     description: Optional for VCO frequency of the PLL in Hertz.
-        The VCO frequency of this PLL cannot be changed during runtime
-        only at startup. Therefore, the output frequencies are very
-        limited and might not even closely match the requested frequency.
-        To work around this restriction the user may specify its own
-        desired VCO frequency for the PLL.
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
     minimum: 650000000
     maximum: 1300000000
     default: 1188000000
@@ -51,7 +50,7 @@ examples:
   - |
     dpclk: clock-display@f1f0000 {
         compatible = "fsl,ls1028a-plldig";
-        reg = <0x0 0xf1f0000 0x0 0xffff>;
+        reg = <0xf1f0000 0xffff>;
         #clock-cells = <0>;
         clocks = <&osc_27m>;
     };

Documentation/devicetree/bindings/clock/imx1-clock.txt

-* Clock bindings for Freescale i.MX1 CPUs
-
-Required properties:
-- compatible: Should be "fsl,imx1-ccm".
-- reg: Address and length of the register set.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
-for the full list of i.MX1 clock IDs.
-
-Examples:
-	clks: ccm@21b000 {
-		#clock-cells = <1>;
-		compatible = "fsl,imx1-ccm";
-		reg = <0x0021b000 0x1000>;
-	};
-
-	pwm: pwm@208000 {
-		#pwm-cells = <2>;
-		compatible = "fsl,imx1-pwm";
-		reg = <0x00208000 0x1000>;
-		interrupts = <34>;
-		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-		clock-names = "ipg", "per";
-	};

Documentation/devicetree/bindings/clock/imx1-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX1 CPUs
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+  for the full list of i.MX1 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx1-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx1-clock.h>
+
+    clock-controller@21b000 {
+        #clock-cells = <1>;
+        compatible = "fsl,imx1-ccm";
+        reg = <0x0021b000 0x1000>;
+    };
+
+    pwm@208000 {
+        #pwm-cells = <2>;
+        compatible = "fsl,imx1-pwm";
+        reg = <0x00208000 0x1000>;
+        interrupts = <34>;
+        clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+        clock-names = "ipg", "per";
+    };

Documentation/devicetree/bindings/clock/imx21-clock.txt

-* Clock bindings for Freescale i.MX21
-
-Required properties:
-- compatible  : Should be "fsl,imx21-ccm".
-- reg         : Address and length of the register set.
-- interrupts  : Should contain CCM interrupt.
-- #clock-cells: Should be <1>.
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
-for the full list of i.MX21 clock IDs.
-
-Examples:
-	clks: ccm@10027000{
-		compatible = "fsl,imx21-ccm";
-		reg = <0x10027000 0x800>;
-		#clock-cells = <1>;
-	};
-
-	uart1: serial@1000a000 {
-		compatible = "fsl,imx21-uart";
-		reg = <0x1000a000 0x1000>;
-		interrupts = <20>;
-		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-			 <&clks IMX21_CLK_PER1>;
-		clock-names = "ipg", "per";
-	};

Documentation/devicetree/bindings/clock/imx21-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX21
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+  for the full list of i.MX21 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx21-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx21-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx21-ccm";
+        reg = <0x10027000 0x800>;
+        #clock-cells = <1>;
+    };
+
+    serial@1000a000 {
+        compatible = "fsl,imx21-uart";
+        reg = <0x1000a000 0x1000>;
+        interrupts = <20>;
+        clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+                 <&clks IMX21_CLK_PER1>;
+        clock-names = "ipg", "per";
+    };

Documentation/devicetree/bindings/clock/imx23-clock.txt

-* Clock bindings for Freescale i.MX23
-
-Required properties:
-- compatible: Should be "fsl,imx23-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX23
-clocks and IDs.
-
-	Clock		ID
-	------------------
-	ref_xtal	0
-	pll		1
-	ref_cpu		2
-	ref_emi		3
-	ref_pix		4
-	ref_io		5
-	saif_sel	6
-	lcdif_sel	7
-	gpmi_sel	8
-	ssp_sel		9
-	emi_sel		10
-	cpu		11
-	etm_sel		12
-	cpu_pll		13
-	cpu_xtal	14
-	hbus		15
-	xbus		16
-	lcdif_div	17
-	ssp_div		18
-	gpmi_div	19
-	emi_pll		20
-	emi_xtal	21
-	etm_div		22
-	saif_div	23
-	clk32k_div	24
-	rtc		25
-	adc		26
-	spdif_div	27
-	clk32k		28
-	dri		29
-	pwm		30
-	filt		31
-	uart		32
-	ssp		33
-	gpmi		34
-	spdif		35
-	emi		36
-	saif		37
-	lcdif		38
-	etm		39
-	usb		40
-	usb_phy		41
-
-Examples:
-
-clks: clkctrl@80040000 {
-	compatible = "fsl,imx23-clkctrl";
-	reg = <0x80040000 0x2000>;
-	#clock-cells = <1>;
-};
-
-auart0: serial@8006c000 {
-	compatible = "fsl,imx23-auart";
-	reg = <0x8006c000 0x2000>;
-	interrupts = <24 25 23>;
-	clocks = <&clks 32>;
-};

Documentation/devicetree/bindings/clock/imx23-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX23
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX23
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll		1
+        ref_cpu		2
+        ref_emi		3
+        ref_pix		4
+        ref_io		5
+        saif_sel	6
+        lcdif_sel	7
+        gpmi_sel	8
+        ssp_sel		9
+        emi_sel		10
+        cpu		11
+        etm_sel		12
+        cpu_pll		13
+        cpu_xtal	14
+        hbus		15
+        xbus		16
+        lcdif_div	17
+        ssp_div		18
+        gpmi_div	19
+        emi_pll		20
+        emi_xtal	21
+        etm_div		22
+        saif_div	23
+        clk32k_div	24
+        rtc		25
+        adc		26
+        spdif_div	27
+        clk32k		28
+        dri		29
+        pwm		30
+        filt		31
+        uart		32
+        ssp		33
+        gpmi		34
+        spdif		35
+        emi		36
+        saif		37
+        lcdif		38
+        etm		39
+        usb		40
+        usb_phy		41
+
+properties:
+  compatible:
+    const: fsl,imx23-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx23-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+    serial@8006c000 {
+        compatible = "fsl,imx23-auart";
+        reg = <0x8006c000 0x2000>;
+        interrupts = <24 25 23>;
+        clocks = <&clks 32>;
+    };

Documentation/devicetree/bindings/clock/imx25-clock.txt

-* Clock bindings for Freescale i.MX25
-
-Required properties:
-- compatible: Should be "fsl,imx25-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX25
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	osc			1
-	mpll			2
-	upll			3
-	mpll_cpu_3_4		4
-	cpu_sel			5
-	cpu			6
-	ahb			7
-	usb_div			8
-	ipg			9
-	per0_sel		10
-	per1_sel		11
-	per2_sel		12
-	per3_sel		13
-	per4_sel		14
-	per5_sel		15
-	per6_sel		16
-	per7_sel		17
-	per8_sel		18
-	per9_sel		19
-	per10_sel		20
-	per11_sel		21
-	per12_sel		22
-	per13_sel		23
-	per14_sel		24
-	per15_sel		25
-	per0			26
-	per1			27
-	per2			28
-	per3			29
-	per4			30
-	per5			31
-	per6			32
-	per7			33
-	per8			34
-	per9			35
-	per10			36
-	per11			37
-	per12			38
-	per13			39
-	per14			40
-	per15			41
-	csi_ipg_per		42
-	epit_ipg_per		43
-	esai_ipg_per		44
-	esdhc1_ipg_per		45
-	esdhc2_ipg_per		46
-	gpt_ipg_per		47
-	i2c_ipg_per		48
-	lcdc_ipg_per		49
-	nfc_ipg_per		50
-	owire_ipg_per		51
-	pwm_ipg_per		52
-	sim1_ipg_per		53
-	sim2_ipg_per		54
-	ssi1_ipg_per		55
-	ssi2_ipg_per		56
-	uart_ipg_per		57
-	ata_ahb			58
-	reserved		59
-	csi_ahb			60
-	emi_ahb			61
-	esai_ahb		62
-	esdhc1_ahb		63
-	esdhc2_ahb		64
-	fec_ahb			65
-	lcdc_ahb		66
-	rtic_ahb		67
-	sdma_ahb		68
-	slcdc_ahb		69
-	usbotg_ahb		70
-	reserved		71
-	reserved		72
-	reserved		73
-	reserved		74
-	can1_ipg		75
-	can2_ipg		76
-	csi_ipg			77
-	cspi1_ipg		78
-	cspi2_ipg		79
-	cspi3_ipg		80
-	dryice_ipg		81
-	ect_ipg			82
-	epit1_ipg		83
-	epit2_ipg		84
-	reserved		85
-	esdhc1_ipg		86
-	esdhc2_ipg		87
-	fec_ipg			88
-	reserved		89
-	reserved		90
-	reserved		91
-	gpt1_ipg		92
-	gpt2_ipg		93
-	gpt3_ipg		94
-	gpt4_ipg		95
-	reserved		96
-	reserved		97
-	reserved		98
-	iim_ipg			99
-	reserved		100
-	reserved		101
-	kpp_ipg			102
-	lcdc_ipg		103
-	reserved		104
-	pwm1_ipg		105
-	pwm2_ipg		106
-	pwm3_ipg		107
-	pwm4_ipg		108
-	rngb_ipg		109
-	reserved		110
-	scc_ipg			111
-	sdma_ipg		112
-	sim1_ipg		113
-	sim2_ipg		114
-	slcdc_ipg		115
-	spba_ipg		116
-	ssi1_ipg		117
-	ssi2_ipg		118
-	tsc_ipg			119
-	uart1_ipg		120
-	uart2_ipg		121
-	uart3_ipg		122
-	uart4_ipg		123
-	uart5_ipg		124
-	reserved		125
-	wdt_ipg			126
-	cko_div			127
-	cko_sel			128
-	cko			129
-
-Examples:
-
-clks: ccm@53f80000 {
-	compatible = "fsl,imx25-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>;
-};
-
-uart1: serial@43f90000 {
-	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-	reg = <0x43f90000 0x4000>;
-	interrupts = <45>;
-	clocks = <&clks 79>, <&clks 50>;
-	clock-names = "ipg", "per";
-};

Documentation/devicetree/bindings/clock/imx25-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX25
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX25
+  clocks and IDs.
+
+        Clock			ID
+        --------------------------
+        dummy			0
+        osc			1
+        mpll			2
+        upll			3
+        mpll_cpu_3_4		4
+        cpu_sel			5
+        cpu			6
+        ahb			7
+        usb_div			8
+        ipg			9
+        per0_sel		10
+        per1_sel		11
+        per2_sel		12
+        per3_sel		13
+        per4_sel		14
+        per5_sel		15
+        per6_sel		16
+        per7_sel		17
+        per8_sel		18
+        per9_sel		19
+        per10_sel		20
+        per11_sel		21
+        per12_sel		22
+        per13_sel		23
+        per14_sel		24
+        per15_sel		25
+        per0			26
+        per1			27
+        per2			28
+        per3			29
+        per4			30
+        per5			31
+        per6			32
+        per7			33
+        per8			34
+        per9			35
+        per10			36
+        per11			37
+        per12			38
+        per13			39
+        per14			40
+        per15			41
+        csi_ipg_per		42
+        epit_ipg_per		43
+        esai_ipg_per		44
+        esdhc1_ipg_per		45
+        esdhc2_ipg_per		46
+        gpt_ipg_per		47
+        i2c_ipg_per		48
+        lcdc_ipg_per		49
+        nfc_ipg_per		50
+        owire_ipg_per		51
+        pwm_ipg_per		52
+        sim1_ipg_per		53
+        sim2_ipg_per		54
+        ssi1_ipg_per		55
+        ssi2_ipg_per		56
+        uart_ipg_per		57
+        ata_ahb			58
+        reserved		59
+        csi_ahb			60
+        emi_ahb			61
+        esai_ahb		62
+        esdhc1_ahb		63
+        esdhc2_ahb		64
+        fec_ahb			65
+        lcdc_ahb		66
+        rtic_ahb		67
+        sdma_ahb		68
+        slcdc_ahb		69
+        usbotg_ahb		70
+        reserved		71
+        reserved		72
+        reserved		73
+        reserved		74
+        can1_ipg		75
+        can2_ipg		76
+        csi_ipg			77
+        cspi1_ipg		78
+        cspi2_ipg		79
+        cspi3_ipg		80
+        dryice_ipg		81
+        ect_ipg			82
+        epit1_ipg		83
+        epit2_ipg		84
+        reserved		85
+        esdhc1_ipg		86
+        esdhc2_ipg		87
+        fec_ipg			88
+        reserved		89
+        reserved		90
+        reserved		91
+        gpt1_ipg		92
+        gpt2_ipg		93
+        gpt3_ipg		94
+        gpt4_ipg		95
+        reserved		96
+        reserved		97
+        reserved		98
+        iim_ipg			99
+        reserved		100
+        reserved		101
+        kpp_ipg			102
+        lcdc_ipg		103
+        reserved		104
+        pwm1_ipg		105
+        pwm2_ipg		106
+        pwm3_ipg		107
+        pwm4_ipg		108
+        rngb_ipg		109
+        reserved		110
+        scc_ipg			111
+        sdma_ipg		112
+        sim1_ipg		113
+        sim2_ipg		114
+        slcdc_ipg		115
+        spba_ipg		116
+        ssi1_ipg		117
+        ssi2_ipg		118
+        tsc_ipg			119
+        uart1_ipg		120
+        uart2_ipg		121
+        uart3_ipg		122
+        uart4_ipg		123
+        uart5_ipg		124
+        reserved		125
+        wdt_ipg			126
+        cko_div			127
+        cko_sel			128
+        cko			129
+
+properties:
+  compatible:
+    const: fsl,imx25-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx25-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
+
+    serial@43f90000 {
+        compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+        reg = <0x43f90000 0x4000>;
+        interrupts = <45>;
+        clocks = <&clks 79>, <&clks 50>;
+        clock-names = "ipg", "per";
+    };

Documentation/devicetree/bindings/clock/imx27-clock.txt

-* Clock bindings for Freescale i.MX27
-
-Required properties:
-- compatible: Should be "fsl,imx27-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
-for the full list of i.MX27 clock IDs.
-
-Examples:
-	clks: ccm@10027000{
-		compatible = "fsl,imx27-ccm";
-		reg = <0x10027000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	uart1: serial@1000a000 {
-		compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-		reg = <0x1000a000 0x1000>;
-		interrupts = <20>;
-		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-			 <&clks IMX27_CLK_PER1_GATE>;
-		clock-names = "ipg", "per";
-	};

Documentation/devicetree/bindings/clock/imx27-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX27
+
+maintainers:
+  - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+  for the full list of i.MX27 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx27-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx27-ccm";
+        reg = <0x10027000 0x1000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
+
+    serial@1000a000 {
+        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+        reg = <0x1000a000 0x1000>;
+        interrupts = <20>;
+        clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+                 <&clks IMX27_CLK_PER1_GATE>;
+        clock-names = "ipg", "per";
+    };

Documentation/devicetree/bindings/clock/imx28-clock.txt

-* Clock bindings for Freescale i.MX28
-
-Required properties:
-- compatible: Should be "fsl,imx28-clkctrl"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX28
-clocks and IDs.
-
-	Clock		ID
-	------------------
-	ref_xtal	0
-	pll0		1
-	pll1		2
-	pll2		3
-	ref_cpu		4
-	ref_emi		5
-	ref_io0		6
-	ref_io1		7
-	ref_pix		8
-	ref_hsadc	9
-	ref_gpmi	10
-	saif0_sel	11
-	saif1_sel	12
-	gpmi_sel	13
-	ssp0_sel	14
-	ssp1_sel	15
-	ssp2_sel	16
-	ssp3_sel	17
-	emi_sel		18
-	etm_sel		19
-	lcdif_sel	20
-	cpu		21
-	ptp_sel		22
-	cpu_pll		23
-	cpu_xtal	24
-	hbus		25
-	xbus		26
-	ssp0_div	27
-	ssp1_div	28
-	ssp2_div	29
-	ssp3_div	30
-	gpmi_div	31
-	emi_pll		32
-	emi_xtal	33
-	lcdif_div	34
-	etm_div		35
-	ptp		36
-	saif0_div	37
-	saif1_div	38
-	clk32k_div	39
-	rtc		40
-	lradc		41
-	spdif_div	42
-	clk32k		43
-	pwm		44
-	uart		45
-	ssp0		46
-	ssp1		47
-	ssp2		48
-	ssp3		49
-	gpmi		50
-	spdif		51
-	emi		52
-	saif0		53
-	saif1		54
-	lcdif		55
-	etm		56
-	fec		57
-	can0		58
-	can1		59
-	usb0		60
-	usb1		61
-	usb0_phy	62
-	usb1_phy	63
-	enet_out	64
-
-Examples:
-
-clks: clkctrl@80040000 {
-	compatible = "fsl,imx28-clkctrl";
-	reg = <0x80040000 0x2000>;
-	#clock-cells = <1>;
-};
-
-auart0: serial@8006a000 {
-	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-	reg = <0x8006a000 0x2000>;
-	interrupts = <112 70 71>;
-	clocks = <&clks 45>;
-};

Documentation/devicetree/bindings/clock/imx28-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX28
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX28
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll0		1
+        pll1		2
+        pll2		3
+        ref_cpu		4
+        ref_emi		5
+        ref_io0		6
+        ref_io1		7
+        ref_pix		8
+        ref_hsadc	9
+        ref_gpmi	10
+        saif0_sel	11
+        saif1_sel	12
+        gpmi_sel	13
+        ssp0_sel	14
+        ssp1_sel	15
+        ssp2_sel	16
+        ssp3_sel	17
+        emi_sel		18
+        etm_sel		19
+        lcdif_sel	20
+        cpu		21
+        ptp_sel		22
+        cpu_pll		23
+        cpu_xtal	24
+        hbus		25
+        xbus		26
+        ssp0_div	27
+        ssp1_div	28
+        ssp2_div	29
+        ssp3_div	30
+        gpmi_div	31
+        emi_pll		32
+        emi_xtal	33
+        lcdif_div	34
+        etm_div		35
+        ptp		36
+        saif0_div	37
+        saif1_div	38
+        clk32k_div	39
+        rtc		40
+        lradc		41
+        spdif_div	42
+        clk32k		43
+        pwm		44
+        uart		45
+        ssp0		46
+        ssp1		47
+        ssp2		48
+        ssp3		49
+        gpmi		50
+        spdif		51
+        emi		52
+        saif0		53
+        saif1		54
+        lcdif		55
+        etm		56
+        fec		57
+        can0		58
+        can1		59
+        usb0		60
+        usb1		61
+        usb0_phy	62
+        usb1_phy	63
+        enet_out	64
+
+properties:
+  compatible:
+    const: fsl,imx28-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx28-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+    serial@8006a000 {
+        compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+        reg = <0x8006a000 0x2000>;
+        interrupts = <112 70 71>;
+        clocks = <&clks 45>;
+    };

Documentation/devicetree/bindings/clock/imx31-clock.txt

-* Clock bindings for Freescale i.MX31
-
-Required properties:
-- compatible: Should be "fsl,imx31-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX31
-clocks and IDs.
-
-	Clock		    ID
-	-----------------------
-	dummy	             0
-	ckih                 1
-	ckil                 2
-	mpll                 3
-	spll                 4
-	upll                 5
-	mcu_main             6
-	hsp                  7
-	ahb                  8
-	nfc                  9
-	ipg                  10
-	per_div              11
-	per                  12
-	csi_sel              13
-	fir_sel              14
-	csi_div              15
-	usb_div_pre          16
-	usb_div_post         17
-	fir_div_pre          18
-	fir_div_post         19
-	sdhc1_gate           20
-	sdhc2_gate           21
-	gpt_gate             22
-	epit1_gate           23
-	epit2_gate           24
-	iim_gate             25
-	ata_gate             26
-	sdma_gate            27
-	cspi3_gate           28
-	rng_gate             29
-	uart1_gate           30
-	uart2_gate           31
-	ssi1_gate            32
-	i2c1_gate            33
-	i2c2_gate            34
-	i2c3_gate            35
-	hantro_gate          36
-	mstick1_gate         37
-	mstick2_gate         38
-	csi_gate             39
-	rtc_gate             40
-	wdog_gate            41
-	pwm_gate             42
-	sim_gate             43
-	ect_gate             44
-	usb_gate             45
-	kpp_gate             46
-	ipu_gate             47
-	uart3_gate           48
-	uart4_gate           49
-	uart5_gate           50
-	owire_gate           51
-	ssi2_gate            52
-	cspi1_gate           53
-	cspi2_gate           54
-	gacc_gate            55
-	emi_gate             56
-	rtic_gate            57
-	firi_gate            58
-
-Examples:
-
-clks: ccm@53f80000{
-	compatible = "fsl,imx31-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>, <53>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@43f90000 {
-	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-	reg = <0x43f90000 0x4000>;
-	interrupts = <45>;
-	clocks = <&clks 10>, <&clks 30>;
-	clock-names = "ipg", "per";
-};

Documentation/devicetree/bindings/clock/imx31-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX31
+
+maintainers:
+  - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX31
+  clocks and IDs.
+
+        Clock		    ID
+        -----------------------
+        dummy	             0
+        ckih                 1
+        ckil                 2
+        mpll                 3
+        spll                 4
+        upll                 5
+        mcu_main             6
+        hsp                  7
+        ahb                  8
+        nfc                  9
+        ipg                  10
+        per_div              11
+        per                  12
+        csi_sel              13
+        fir_sel              14
+        csi_div              15
+        usb_div_pre          16
+        usb_div_post         17
+        fir_div_pre          18
+        fir_div_post         19
+        sdhc1_gate           20
+        sdhc2_gate           21
+        gpt_gate             22
+        epit1_gate           23
+        epit2_gate           24
+        iim_gate             25
+        ata_gate             26
+        sdma_gate            27
+        cspi3_gate           28
+        rng_gate             29
+        uart1_gate           30
+        uart2_gate           31
+        ssi1_gate            32
+        i2c1_gate            33
+        i2c2_gate            34
+        i2c3_gate            35
+        hantro_gate          36
+        mstick1_gate         37
+        mstick2_gate         38
+        csi_gate             39
+        rtc_gate             40
+        wdog_gate            41
+        pwm_gate             42
+        sim_gate             43
+        ect_gate             44
+        usb_gate             45
+        kpp_gate             46
+        ipu_gate             47
+        uart3_gate           48
+        uart4_gate           49
+        uart5_gate           50
+        owire_gate           51
+        ssi2_gate            52
+        cspi1_gate           53
+        cspi2_gate           54
+        gacc_gate            55
+        emi_gate             56
+        rtic_gate            57
+        firi_gate            58
+
+properties:
+  compatible:
+    const: fsl,imx31-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for DVFS when a frequency change is requested, request 2 is
+      to generate interrupt for DPTC when a voltage change is requested.
+    items:
+      - description: CCM DVFS interrupt request 1
+      - description: CCM DPTC interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx31-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>, <53>;
+        #clock-cells = <1>;
+    };
+
+    serial@43f90000 {
+        compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+        reg = <0x43f90000 0x4000>;
+        interrupts = <45>;
+        clocks = <&clks 10>, <&clks 30>;
+        clock-names = "ipg", "per";
+    };

Documentation/devicetree/bindings/clock/imx35-clock.txt

-* Clock bindings for Freescale i.MX35
-
-Required properties:
-- compatible: Should be "fsl,imx35-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX35
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	ckih			0
-	mpll			1
-	ppll			2
-	mpll_075		3
-	arm			4
-	hsp			5
-	hsp_div			6
-	hsp_sel			7
-	ahb			8
-	ipg			9
-	arm_per_div		10
-	ahb_per_div		11
-	ipg_per			12
-	uart_sel		13
-	uart_div		14
-	esdhc_sel		15
-	esdhc1_div		16
-	esdhc2_div		17
-	esdhc3_div		18
-	spdif_sel		19
-	spdif_div_pre		20
-	spdif_div_post		21
-	ssi_sel			22
-	ssi1_div_pre		23
-	ssi1_div_post		24
-	ssi2_div_pre		25
-	ssi2_div_post		26
-	usb_sel			27
-	usb_div			28
-	nfc_div			29
-	asrc_gate		30
-	pata_gate		31
-	audmux_gate		32
-	can1_gate		33
-	can2_gate		34
-	cspi1_gate		35
-	cspi2_gate		36
-	ect_gate		37
-	edio_gate		38
-	emi_gate		39
-	epit1_gate		40
-	epit2_gate		41
-	esai_gate		42
-	esdhc1_gate		43
-	esdhc2_gate		44
-	esdhc3_gate		45
-	fec_gate		46
-	gpio1_gate		47
-	gpio2_gate		48
-	gpio3_gate		49
-	gpt_gate		50
-	i2c1_gate		51
-	i2c2_gate		52
-	i2c3_gate		53
-	iomuxc_gate		54
-	ipu_gate		55
-	kpp_gate		56
-	mlb_gate		57
-	mshc_gate		58
-	owire_gate		59
-	pwm_gate		60
-	rngc_gate		61
-	rtc_gate		62
-	rtic_gate		63
-	scc_gate		64
-	sdma_gate		65
-	spba_gate		66
-	spdif_gate		67
-	ssi1_gate		68
-	ssi2_gate		69
-	uart1_gate		70
-	uart2_gate		71
-	uart3_gate		72
-	usbotg_gate		73
-	wdog_gate		74
-	max_gate		75
-	admux_gate		76
-	csi_gate		77
-	csi_div			78
-	csi_sel			79
-	iim_gate		80
-	gpu2d_gate		81
-	ckli_gate		82
-
-Examples:
-
-clks: ccm@53f80000 {
-	compatible = "fsl,imx35-ccm";
-	reg = <0x53f80000 0x4000>;
-	interrupts = <31>;
-	#clock-cells = <1>;
-};
-
-esdhc1: esdhc@53fb4000 {
-	compatible = "fsl,imx35-esdhc";
-	reg = <0x53fb4000 0x4000>;
-	interrupts = <7>;
-	clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-	clock-names = "ipg", "ahb", "per";
-};

Documentation/devicetree/bindings/clock/imx35-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX35
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX35
+  clocks and IDs.
+
+        Clock			ID
+        ---------------------------
+        ckih			0
+        mpll			1
+        ppll			2
+        mpll_075		3
+        arm			4
+        hsp			5
+        hsp_div			6
+        hsp_sel			7
+        ahb			8
+        ipg			9
+        arm_per_div		10
+        ahb_per_div		11
+        ipg_per			12
+        uart_sel		13
+        uart_div		14
+        esdhc_sel		15
+        esdhc1_div		16
+        esdhc2_div		17
+        esdhc3_div		18
+        spdif_sel		19
+        spdif_div_pre		20
+        spdif_div_post		21
+        ssi_sel			22
+        ssi1_div_pre		23
+        ssi1_div_post		24
+        ssi2_div_pre		25
+        ssi2_div_post		26
+        usb_sel			27
+        usb_div			28
+        nfc_div			29
+        asrc_gate		30
+        pata_gate		31
+        audmux_gate		32
+        can1_gate		33
+        can2_gate		34
+        cspi1_gate		35
+        cspi2_gate		36
+        ect_gate		37
+        edio_gate		38
+        emi_gate		39
+        epit1_gate		40
+        epit2_gate		41
+        esai_gate		42
+        esdhc1_gate		43
+        esdhc2_gate		44
+        esdhc3_gate		45
+        fec_gate		46
+        gpio1_gate		47
+        gpio2_gate		48
+        gpio3_gate		49
+        gpt_gate		50
+        i2c1_gate		51
+        i2c2_gate		52
+        i2c3_gate		53
+        iomuxc_gate		54
+        ipu_gate		55
+        kpp_gate		56
+        mlb_gate		57
+        mshc_gate		58
+        owire_gate		59
+        pwm_gate		60
+        rngc_gate		61
+        rtc_gate		62
+        rtic_gate		63
+        scc_gate		64
+        sdma_gate		65
+        spba_gate		66
+        spdif_gate		67
+        ssi1_gate		68
+        ssi2_gate		69
+        uart1_gate		70
+        uart2_gate		71
+        uart3_gate		72
+        usbotg_gate		73
+        wdog_gate		74
+        max_gate		75
+        admux_gate		76
+        csi_gate		77
+        csi_div			78
+        csi_sel			79
+        iim_gate		80
+        gpu2d_gate		81
+        ckli_gate		82
+
+properties:
+  compatible:
+    const: fsl,imx35-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx35-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
+
+    esdhc@53fb4000 {
+        compatible = "fsl,imx35-esdhc";
+        reg = <0x53fb4000 0x4000>;
+        interrupts = <7>;
+        clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+        clock-names = "ipg", "ahb", "per";
+    };

Documentation/devicetree/bindings/clock/imx5-clock.txt

-* Clock bindings for Freescale i.MX5
-
-Required properties:
-- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
-for the full list of i.MX5 clock IDs.
-
-Examples (for mx53):
-
-clks: ccm@53fd4000{
-	compatible = "fsl,imx53-ccm";
-	reg = <0x53fd4000 0x4000>;
-	interrupts = <0 71 0x04 0 72 0x04>;
-	#clock-cells = <1>;
-};
-
-can1: can@53fc8000 {
-	compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
-	reg = <0x53fc8000 0x4000>;
-	interrupts = <82>;
-	clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-	clock-names = "ipg", "per";
-};

Documentation/devicetree/bindings/clock/imx5-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX5
+
+maintainers:
+  - Fabio Estevam <fabio.estevam@freescale.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+  for the full list of i.MX5 clock IDs.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-ccm
+      - fsl,imx51-ccm
+      - fsl,imx50-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@53fd4000{
+        compatible = "fsl,imx53-ccm";
+        reg = <0x53fd4000 0x4000>;
+        interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
+
+    can@53fc8000 {
+        compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+        reg = <0x53fc8000 0x4000>;
+        interrupts = <82>;
+        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+        clock-names = "ipg", "per";
+    };

Documentation/devicetree/bindings/clock/imx6q-clock.txt

-* Clock bindings for Freescale i.MX6 Quad
-
-Required properties:
-- compatible: Should be "fsl,imx6q-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-Optional properties:
-- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
-  on power off.
-  Use this property if the SoC should be powered off by external power
-  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
-  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
-  be using "syscon-poweroff" driver instead.
-- clocks: list of clock specifiers, must contain an entry for each entry
-          in clock-names
-- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
-for the full list of i.MX6 Quad and DualLite clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-clks: ccm@20c4000 {
-	compatible = "fsl,imx6q-ccm";
-	reg = <0x020c4000 0x4000>;
-	interrupts = <0 87 0x04 0 88 0x04>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@2020000 {
-	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-	reg = <0x02020000 0x4000>;
-	interrupts = <0 26 0x04>;
-	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
-	clock-names = "ipg", "per";
-};

Documentation/devicetree/bindings/clock/imx6q-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 Quad
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6q-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+    maxItems: 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 24m osc
+      - description: 32k osc
+      - description: ckih1 clock input
+      - description: anaclk1 clock input
+      - description: anaclk2 clock input
+
+  clock-names:
+    items:
+      - const: osc
+      - const: ckil
+      - const: ckih1
+      - const: anaclk1
+      - const: anaclk2
+
+  fsl,pmic-stby-poweroff:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Use this property if the SoC should be powered off by external power
+      management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+      Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+      be using "syscon-poweroff" driver instead.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6q-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/imx6sl-clock.txt

-* Clock bindings for Freescale i.MX6 SoloLite
-
-Required properties:
-- compatible: Should be "fsl,imx6sl-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sl-clock.h
-for the full list of i.MX6 SoloLite clock IDs.

Documentation/devicetree/bindings/clock/imx6sl-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloLite
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sl-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+    maxItems: 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sl-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/imx6sll-clock.txt

-* Clock bindings for Freescale i.MX6 SLL
-
-Required properties:
-- compatible: Should be "fsl,imx6sll-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
-for the full list of i.MX6 SLL clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6sll-clock.h>
-
-clks: clock-controller@20c4000 {
-		compatible = "fsl,imx6sll-ccm";
-		reg = <0x020c4000 0x4000>;
-		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-		#clock-cells = <1>;
-		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
-		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-};
-
-uart1: serial@2020000 {
-		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
-		reg = <0x02020000 0x4000>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
-			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
-		clock-names = "ipg", "per";
-};

Documentation/devicetree/bindings/clock/imx6sll-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SLL
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sll-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+    maxItems: 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sll-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+    };

Documentation/devicetree/bindings/clock/imx6sx-clock.txt

-* Clock bindings for Freescale i.MX6 SoloX
-
-Required properties:
-- compatible: Should be "fsl,imx6sx-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sx-clock.h
-for the full list of i.MX6 SoloX clock IDs.

Documentation/devicetree/bindings/clock/imx6sx-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloX
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sx-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+    maxItems: 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+      - description: anaclk1 clock input
+      - description: anaclk2 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+      - const: anaclk1
+      - const: anaclk2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sx-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+    };

Documentation/devicetree/bindings/clock/imx6ul-clock.txt

-* Clock bindings for Freescale i.MX6 UltraLite
-
-Required properties:
-- compatible: Should be "fsl,imx6ul-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6ul-clock.h
-for the full list of i.MX6 UltraLite clock IDs.

Documentation/devicetree/bindings/clock/imx6ul-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 UltraLite
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6ul-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+    maxItems: 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6ul-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+    };

Documentation/devicetree/bindings/clock/imx7d-clock.txt

-* Clock bindings for Freescale i.MX7 Dual
-
-Required properties:
-- compatible: Should be "fsl,imx7d-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx7d-clock.h
-for the full list of i.MX7 Dual clock IDs.

Documentation/devicetree/bindings/clock/imx7d-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX7 Dual
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
+  for the full list of i.MX7 Dual clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx7d-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@30380000 {
+        compatible = "fsl,imx7d-ccm";
+        reg = <0x30380000 0x10000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>;
+        clock-names = "ckil", "osc";
+    };

Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt

-* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
-
-The Low-Power Clock Gate (LPCG) modules contain a local programming
-model to control the clock gates for the peripherals. An LPCG module
-is used to locally gate the clocks for the associated peripheral.
-
-Note:
-This level of clock gating is provided after the clocks are generated
-by the SCU resources and clock controls. Thus even if the clock is
-enabled by these control bits, it might still not be running based
-on the base resource.
-
-Required properties:
-- compatible:	Should be one of:
-		  "fsl,imx8qxp-lpcg-adma",
-		  "fsl,imx8qxp-lpcg-conn",
-		  "fsl,imx8qxp-lpcg-dc",
-		  "fsl,imx8qxp-lpcg-dsp",
-		  "fsl,imx8qxp-lpcg-gpu",
-		  "fsl,imx8qxp-lpcg-hsio",
-		  "fsl,imx8qxp-lpcg-img",
-		  "fsl,imx8qxp-lpcg-lsio",
-		  "fsl,imx8qxp-lpcg-vpu"
-- reg:		Address and length of the register set
-- #clock-cells:	Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Examples:
-
-#include <dt-bindings/clock/imx8qxp-clock.h>
-
-conn_lpcg: clock-controller@5b200000 {
-	compatible = "fsl,imx8qxp-lpcg-conn";
-	reg = <0x5b200000 0xb0000>;
-	#clock-cells = <1>;
-};
-
-usdhc1: mmc@5b010000 {
-	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-	interrupt-parent = <&gic>;
-	interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-	reg = <0x5b010000 0x10000>;
-	clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
-		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
-		 <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
-	clock-names = "ipg", "per", "ahb";
-};

Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+
+maintainers:
+  - Aisheng Dong <aisheng.dong@nxp.com>
+
+description: |
+  The Low-Power Clock Gate (LPCG) modules contain a local programming
+  model to control the clock gates for the peripherals. An LPCG module
+  is used to locally gate the clocks for the associated peripheral.
+
+  This level of clock gating is provided after the clocks are generated
+  by the SCU resources and clock controls. Thus even if the clock is
+  enabled by these control bits, it might still not be running based
+  on the base resource.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from:
+  include/dt-bindings/clock/imx8-clock.h
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-lpcg-adma
+      - fsl,imx8qxp-lpcg-conn
+      - fsl,imx8qxp-lpcg-dc
+      - fsl,imx8qxp-lpcg-dsp
+      - fsl,imx8qxp-lpcg-gpu
+      - fsl,imx8qxp-lpcg-hsio
+      - fsl,imx8qxp-lpcg-img
+      - fsl,imx8qxp-lpcg-lsio
+      - fsl,imx8qxp-lpcg-vpu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@5b200000 {
+        compatible = "fsl,imx8qxp-lpcg-conn";
+        reg = <0x5b200000 0xb0000>;
+        #clock-cells = <1>;
+    };
+
+    mmc@5b010000 {
+        compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+        interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0x5b010000 0x10000>;
+        clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
+                 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
+                 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
+        clock-names = "ipg", "per", "ahb";
+        power-domains = <&pd IMX_SC_R_SDHC_0>;
+    };

Documentation/devicetree/bindings/clock/ingenic,cgu.txt

-Ingenic SoC CGU binding
-
-The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
-typically includes a variety of PLLs, multiplexers, dividers & gates in order
-to provide many different clock signals derived from only 2 external source
-clocks.
-
-Required properties:
-- compatible : Should be one of:
-  * ingenic,jz4740-cgu
-  * ingenic,jz4725b-cgu
-  * ingenic,jz4770-cgu
-  * ingenic,jz4780-cgu
-  * ingenic,x1000-cgu
-- reg : The address & length of the CGU registers.
-- clocks : List of phandle & clock specifiers for clocks external to the CGU.
-  Two such external clocks should be specified - first the external crystal
-  "ext" and second the RTC clock source "rtc".
-- clock-names : List of name strings for the external clocks.
-- #clock-cells: Should be 1.
-  Clock consumers specify this argument to identify a clock. The valid values
-  may be found in <dt-bindings/clock/<soctype>-cgu.h>.
-
-Example SoC include file:
-
-/ {
-	cgu: jz4740-cgu {
-		compatible = "ingenic,jz4740-cgu";
-		reg = <0x10000000 0x100>;
-		#clock-cells = <1>;
-	};
-
-	uart0: serial@10030000 {
-		clocks = <&cgu JZ4740_CLK_UART0>;
-	};
-};
-
-Example board file:
-
-/ {
-	ext: clock@0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
-	rtc: clock@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
-	&cgu {
-		clocks = <&ext> <&rtc>;
-		clock-names: "ext", "rtc";
-	};
-};

Documentation/devicetree/bindings/clock/ingenic,cgu.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs CGU devicetree bindings
+
+description: |
+  The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
+  typically includes a variety of PLLs, multiplexers, dividers & gates in order
+  to provide many different clock signals derived from only 2 external source
+  clocks.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-cgu
+          - ingenic,jz4725b-cgu
+          - ingenic,jz4770-cgu
+          - ingenic,jz4780-cgu
+          - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^clock-controller@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  ranges: true
+
+  compatible:
+    items:
+      - enum:
+        - ingenic,jz4740-cgu
+        - ingenic,jz4725b-cgu
+        - ingenic,jz4770-cgu
+        - ingenic,jz4780-cgu
+        - ingenic,x1000-cgu
+        - ingenic,x1830-cgu
+      - const: simple-mfd
+    minItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External oscillator clock
+      - description: Internal 32 kHz RTC clock
+
+  clock-names:
+    items:
+      - const: ext
+      - enum:
+        - rtc
+        - osc32k # Different name, same clock
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 64
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 64
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+patternProperties:
+  "^usb-phy@[a-f0-9]+$":
+    allOf: [ $ref: "../usb/ingenic,jz4770-phy.yaml#" ]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4770-cgu.h>
+    cgu: clock-controller@10000000 {
+      compatible = "ingenic,jz4770-cgu", "simple-mfd";
+      reg = <0x10000000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x10000000 0x100>;
+
+      clocks = <&ext>, <&osc32k>;
+      clock-names = "ext", "osc32k";
+
+      #clock-cells = <1>;
+
+      otg_phy: usb-phy@3c {
+        compatible = "ingenic,jz4770-phy";
+        reg = <0x3c 0x10>;
+
+        clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+        vcc-supply = <&ldo5>;
+
+        #phy-cells = <0>;
+      };
+    };

Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml

@@ -65,7 +65,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sc7180";
-      reg = <0 0x00100000 0 0x1f0000>;
+      reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;

Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml

@@ -63,7 +63,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sm8150";
-      reg = <0 0x00100000 0 0x1f0000>;
+      reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "sleep_clk";

Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml

@@ -61,7 +61,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sm8250";
-      reg = <0 0x00100000 0 0x1f0000>;
+      reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "sleep_clk";

Documentation/devicetree/bindings/clock/qcom,mmcc.yaml

@@ -15,7 +15,7 @@ description: |
   power domains.
 
 properties:
-  compatible :
+  compatible:
     enum:
       - qcom,mmcc-apq8064
       - qcom,mmcc-apq8084

Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml

@@ -66,7 +66,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@af00000 {
       compatible = "qcom,sc7180-dispcc";
-      reg = <0 0x0af00000 0 0x200000>;
+      reg = <0x0af00000 0x200000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_DISP_GPLL0_CLK_SRC>,
                <&dsi_phy 0>,

Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml

@@ -60,7 +60,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@5090000 {
       compatible = "qcom,sc7180-gpucc";
-      reg = <0 0x05090000 0 0x9000>;
+      reg = <0x05090000 0x9000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_GPU_GPLL0_CLK_SRC>,
                <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;

Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml

@@ -50,7 +50,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sc7180.h>
     clock-controller@41a8000 {
       compatible = "qcom,sc7180-mss";
-      reg = <0 0x041a8000 0 0x8000>;
+      reg = <0x041a8000 0x8000>;
       clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
                <&gcc GCC_MSS_NAV_AXI_CLK>,
                <&gcc GCC_MSS_CFG_AHB_CLK>;

Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml

@@ -55,7 +55,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@ab00000 {
       compatible = "qcom,sc7180-videocc";
-      reg = <0 0x0ab00000 0 0x10000>;
+      reg = <0x0ab00000 0x10000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>;
       clock-names = "bi_tcxo";
       #clock-cells = <1>;

Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml

@@ -75,7 +75,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@af00000 {
       compatible = "qcom,sdm845-dispcc";
-      reg = <0 0x0af00000 0 0x10000>;
+      reg = <0x0af00000 0x10000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_DISP_GPLL0_CLK_SRC>,
                <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,

Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml

@@ -60,7 +60,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@5090000 {
       compatible = "qcom,sdm845-gpucc";
-      reg = <0 0x05090000 0 0x9000>;
+      reg = <0x05090000 0x9000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
                <&gcc GCC_GPU_GPLL0_CLK_SRC>,
                <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;

Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml

@@ -55,7 +55,7 @@ examples:
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@ab00000 {
       compatible = "qcom,sdm845-videocc";
-      reg = <0 0x0ab00000 0 0x10000>;
+      reg = <0x0ab00000 0x10000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>;
       clock-names = "bi_tcxo";
       #clock-cells = <1>;

Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml

@@ -76,23 +76,19 @@ examples:
   - |
     ap_clk: clock-controller@21500000 {
       compatible = "sprd,sc9863a-ap-clk";
-      reg = <0 0x21500000 0 0x1000>;
+      reg = <0x21500000 0x1000>;
       clocks = <&ext_26m>, <&ext_32k>;
       clock-names = "ext-26m", "ext-32k";
       #clock-cells = <1>;
     };
 
   - |
-    soc {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      ap_ahb_regs: syscon@20e00000 {
+    syscon@20e00000 {
       compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
-        reg = <0 0x20e00000 0 0x4000>;
+      reg = <0x20e00000 0x4000>;
       #address-cells = <1>;
       #size-cells = <1>;
-        ranges = <0 0 0x20e00000 0x4000>;
+      ranges = <0 0x20e00000 0x4000>;
 
       apahb_gate: apahb-gate@0 {
         compatible = "sprd,sc9863a-apahb-gate";
@@ -100,6 +96,5 @@ examples:
         #clock-cells = <1>;
       };
     };
-    };
 
 ...

Documentation/devicetree/bindings/connector/usb-connector.yaml

@@ -15,11 +15,16 @@ description:
 
 properties:
   compatible:
-    enum:
+    oneOf:
+      - enum:
           - usb-a-connector
           - usb-b-connector
           - usb-c-connector
 
+      - items:
+          - const: gpio-usb-b-connector
+          - const: usb-b-connector
+
   label:
     description: Symbolic name for the connector.
 
@@ -27,8 +32,8 @@ properties:
     description: Size of the connector, should be specified in case of
       non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
       connectors.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - mini
       - micro
@@ -57,8 +62,8 @@ properties:
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - source
       - sink
@@ -66,8 +71,8 @@ properties:
 
   try-power-role:
     description: Preferred power role.
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - source
       - sink
@@ -76,8 +81,8 @@ properties:
   data-role:
     description: Data role if Type C connector supports USB data. "dual" refers
       Dual Role Device (DRD).
-    allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#definitions/string
+
     enum:
       - host
       - device
@@ -95,8 +100,7 @@ properties:
       defined in dt-bindings/usb/pd.h.
     minItems: 1
     maxItems: 7
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   sink-pdos:
     description: An array of u32 with each entry providing supported power sink
@@ -108,8 +112,7 @@ properties:
       in dt-bindings/usb/pd.h.
     minItems: 1
     maxItems: 7
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   op-sink-microwatt:
     description: Sink required operating power in microwatt, if source can't
@@ -142,9 +145,22 @@ properties:
 required:
   - compatible
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: gpio-usb-b-connector
+    then:
+      anyOf:
+        - required:
+            - vbus-gpios
+        - required:
+            - id-gpios
+
 examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
-  - |+
+  - |
     muic-max77843 {
       usb_con1: connector {
         compatible = "usb-b-connector";
@@ -156,7 +172,7 @@ examples:
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
   # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
-  - |+
+  - |
     ccic: s2mm005 {
       usb_con2: connector {
         compatible = "usb-c-connector";
@@ -190,7 +206,7 @@ examples:
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
   # power delivery support and enables drp.
-  - |+
+  - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
       usb_con3: connector {
@@ -204,3 +220,16 @@ examples:
         op-sink-microwatt = <10000000>;
       };
     };
+
+  # USB connector with GPIO control lines
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+      connector {
+        compatible = "gpio-usb-b-connector", "usb-b-connector";
+        type = "micro";
+        id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+        vbus-supply = <&usb_p0_vbus>;
+      };
+    };

Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml

@@ -45,7 +45,7 @@ examples:
 
     crypto: crypto-engine@c883e000 {
         compatible = "amlogic,gxl-crypto";
-        reg = <0x0 0xc883e000 0x0 0x36>;
+        reg = <0xc883e000 0x36>;
         interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
         clocks = <&clkc CLKID_BLKMV>;
         clock-names = "blkmv";

Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml

@@ -36,11 +36,10 @@ properties:
 
   dma-maxburst:
     description: Set number of maximum dma burst supported
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - minimum: 0
-      - maximum: 2
-      - default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
+    default: 0
 
 required:
   - compatible

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml

@@ -66,9 +66,8 @@ properties:
       - allwinner,sun50i-h6-display-engine
 
   allwinner,pipelines:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle-array
-      - minItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
     maxItems: 2
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml

@@ -71,11 +71,10 @@ properties:
     maxItems: 4
 
   clock-output-names:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string-array
-      - maxItems: 1
     description:
       Name of the LCD pixel clock created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+    maxItems: 1
 
   dmas:
     maxItems: 1

Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
+
+maintainers:
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7808
+      - analogix,anx7812
+      - analogix,anx7814
+      - analogix,anx7818
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the INTP interrupt.
+
+  hpd-gpios:
+    deprecated: true
+    maxItems: 1
+    description: Which GPIO to use for hpd.
+
+  pd-gpios:
+    maxItems: 1
+    description: Which GPIO to use for power down.
+
+  reset-gpios:
+    maxItems: 1
+    description: Which GPIO to use for reset.
+
+  dvdd10-supply:
+    description: Regulator for 1.0V digital core power.
+
+  ports:
+    type: object
+    description:
+      A node containing input and output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+
+    properties:
+      port@0:
+        type: object
+        description: Video port for HDMI input.
+
+        properties:
+          reg:
+            const: 0
+
+      port@1:
+        type: object
+        description:
+          Video port for SlimPort, DisplayPort, eDP or MyDP output.
+
+        properties:
+          reg:
+            const: 1
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        anx7814: bridge@38 {
+            compatible = "analogix,anx7814";
+            reg = <0x38>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
+            pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    anx7814_in: endpoint {
+                        remote-endpoint = <&hdmi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    anx7814_out: endpoint {
+                        remote-endpoint = <&edp_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/bridge/anx7814.txt

-Analogix ANX7814 SlimPort (Full-HD Transmitter)
------------------------------------------------
-
-The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
-designed for portable devices.
-
-Required properties:
-
- - compatible		: Must be one of:
-			  "analogix,anx7808"
-			  "analogix,anx7812"
-			  "analogix,anx7814"
-			  "analogix,anx7818"
- - reg			: I2C address of the device
- - interrupts		: Should contain the INTP interrupt
- - hpd-gpios		: Which GPIO to use for hpd
- - pd-gpios		: Which GPIO to use for power down
- - reset-gpios		: Which GPIO to use for reset
-
-Optional properties:
-
- - dvdd10-supply	: Regulator for 1.0V digital core power.
- - Video port for HDMI input, using the DT bindings defined in [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	anx7814: anx7814@38 {
-		compatible = "analogix,anx7814";
-		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
-		hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
-		pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
-		port {
-			anx7814_in: endpoint {
-				remote-endpoint = <&hdmi0_out>;
-			};
-		};
-	};

Documentation/devicetree/bindings/display/panel/panel-common.yaml

@@ -48,9 +48,8 @@ properties:
   rotation:
     description:
       Display rotation in degrees counter clockwise (0,90,180,270)
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 0, 90, 180, 270 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 90, 180, 270]
 
   # Display Timings
   panel-timing:
@@ -58,16 +57,14 @@ properties:
       Most display panels are restricted to a single resolution and
       require specific display timings. The panel-timing subnode expresses those
       timings.
-    allOf:
-      - $ref: panel-timing.yaml#
+    $ref: panel-timing.yaml#
 
   display-timings:
     description:
       Some display panels support several resolutions with different timings.
       The display-timings bindings supports specifying several timings and
       optionally specifying which is the native mode.
-    allOf:
-      - $ref: display-timings.yaml#
+    $ref: display-timings.yaml#
 
   # Connectivity
   port:

Documentation/devicetree/bindings/display/panel/panel-timing.yaml

@@ -72,14 +72,12 @@ properties:
   hfront-porch:
     description: Horizontal front porch panel timing
     oneOf:
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
+        maxItems: 1
         items:
           description: typical number of pixels
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
+        minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
@@ -87,14 +85,12 @@ properties:
   hback-porch:
     description: Horizontal back porch timing
     oneOf:
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
+        maxItems: 1
         items:
           description: typical number of pixels
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
+        minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
@@ -102,14 +98,12 @@ properties:
   hsync-len:
     description: Horizontal sync length panel timing
     oneOf:
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
+        maxItems: 1
         items:
           description: typical number of pixels
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
+        minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
@@ -117,14 +111,12 @@ properties:
   vfront-porch:
     description: Vertical front porch panel timing
     oneOf:
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
+        maxItems: 1
         items:
           description: typical number of lines
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
+        minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
@@ -132,14 +124,12 @@ properties:
   vback-porch:
     description: Vertical back porch panel timing
     oneOf:
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
+        maxItems: 1
         items:
           description: typical number of lines
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
+        minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
@@ -147,14 +137,12 @@ properties:
   vsync-len:
     description: Vertical sync length panel timing
     oneOf:
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32
-        - maxItems: 1
+        maxItems: 1
         items:
           description: typical number of lines
-      - allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-        - minItems: 3
+        minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines