firmware: qcom_scm: Remove thin wrappers

qcom_scm-32 and qcom_scm-64 implementations are nearly identical, so
make qcom_scm_call and qcom_scm_call_atomic unique to each and the SCM
descriptor creation common to each. There are the following catches:
- __qcom_scm_is_call_available is still in each -32,-64 implementation
  as the argument is unique to each convention
- For some functions, only one implementation was provided in -32 or
  -64. The actual implementation was moved into qcom_scm.c
- io_writel and io_readl in -64 were non-atomic calls and in -32 they
  were. Atomic is the better option, so use it.

Tested-by: Brian Masney <masneyb@onstation.org> # arm32
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
Link: https://lore.kernel.org/r/1578431066-19600-17-git-send-email-eberman@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

drivers/firmware/qcom_scm.h

@@ -3,19 +3,64 @@
  */
 #ifndef __QCOM_SCM_INT_H
 #define __QCOM_SCM_INT_H
+#define MAX_QCOM_SCM_ARGS 10
+#define MAX_QCOM_SCM_RETS 3
+
+enum qcom_scm_arg_types {
+	QCOM_SCM_VAL,
+	QCOM_SCM_RO,
+	QCOM_SCM_RW,
+	QCOM_SCM_BUFVAL,
+};
+
+#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
+			   (((a) & 0x3) << 4) | \
+			   (((b) & 0x3) << 6) | \
+			   (((c) & 0x3) << 8) | \
+			   (((d) & 0x3) << 10) | \
+			   (((e) & 0x3) << 12) | \
+			   (((f) & 0x3) << 14) | \
+			   (((g) & 0x3) << 16) | \
+			   (((h) & 0x3) << 18) | \
+			   (((i) & 0x3) << 20) | \
+			   (((j) & 0x3) << 22) | \
+			   ((num) & 0xf))
+
+#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
+
+
+/**
+ * struct qcom_scm_desc
+ * @arginfo:	Metadata describing the arguments in args[]
+ * @args:	The array of arguments for the secure syscall
+ */
+struct qcom_scm_desc {
+	u32 svc;
+	u32 cmd;
+	u32 arginfo;
+	u64 args[MAX_QCOM_SCM_ARGS];
+	u32 owner;
+};
+
+/**
+ * struct qcom_scm_res
+ * @result:	The values returned by the secure syscall
+ */
+struct qcom_scm_res {
+	u64 result[MAX_QCOM_SCM_RETS];
+};
+
+extern int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+			 struct qcom_scm_res *res);
+extern int qcom_scm_call_atomic(struct device *dev,
+				const struct qcom_scm_desc *desc,
+				struct qcom_scm_res *res);
 
 #define QCOM_SCM_SVC_BOOT		0x01
 #define QCOM_SCM_BOOT_SET_ADDR		0x01
 #define QCOM_SCM_BOOT_TERMINATE_PC	0x02
 #define QCOM_SCM_BOOT_SET_DLOAD_MODE	0x10
 #define QCOM_SCM_BOOT_SET_REMOTE_STATE	0x0a
-extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
-		const cpumask_t *cpus);
-extern int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
-		const cpumask_t *cpus);
-extern void __qcom_scm_cpu_power_down(struct device *dev, u32 flags);
-extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
-extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
 #define QCOM_SCM_FLUSH_FLAG_MASK	0x3
 
 #define QCOM_SCM_SVC_PIL		0x02
@@ -25,20 +70,10 @@ extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
 #define QCOM_SCM_PIL_PAS_SHUTDOWN	0x06
 #define QCOM_SCM_PIL_PAS_IS_SUPPORTED	0x07
 #define QCOM_SCM_PIL_PAS_MSS_RESET	0x0a
-extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
-extern int  __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
-		dma_addr_t metadata_phys);
-extern int  __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
-		phys_addr_t addr, phys_addr_t size);
-extern int  __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
-extern int  __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
-extern int  __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
 
 #define QCOM_SCM_SVC_IO			0x05
 #define QCOM_SCM_IO_READ		0x01
 #define QCOM_SCM_IO_WRITE		0x02
-extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned int *val);
-extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);
 
 #define QCOM_SCM_SVC_INFO		0x06
 #define QCOM_SCM_INFO_IS_CALL_AVAIL	0x01
@@ -50,35 +85,17 @@ extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
 #define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE	0x03
 #define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT	0x04
 #define QCOM_SCM_MP_ASSIGN			0x16
-extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
-				      u32 spare);
-extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
-					     size_t *size);
-extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
-					     u32 size, u32 spare);
-extern int  __qcom_scm_assign_mem(struct device *dev,
-				  phys_addr_t mem_region, size_t mem_sz,
-				  phys_addr_t src, size_t src_sz,
-				  phys_addr_t dest, size_t dest_sz);
 
 #define QCOM_SCM_SVC_OCMEM		0x0f
 #define QCOM_SCM_OCMEM_LOCK_CMD		0x01
 #define QCOM_SCM_OCMEM_UNLOCK_CMD	0x02
-extern int __qcom_scm_ocmem_lock(struct device *dev, u32 id, u32 offset,
-				 u32 size, u32 mode);
-extern int __qcom_scm_ocmem_unlock(struct device *dev, u32 id, u32 offset,
-				   u32 size);
 
 #define QCOM_SCM_SVC_HDCP		0x11
 #define QCOM_SCM_HDCP_INVOKE		0x01
-extern int __qcom_scm_hdcp_req(struct device *dev,
-		struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
 
 #define QCOM_SCM_SVC_SMMU_PROGRAM		0x15
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1		0x03
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL	0x02
-extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
-						bool enable);
 
 extern void __qcom_scm_init(void);