Commit 5895198c authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c
  staging: intel_sst: intelmid needs delay.h
  staging: solo6x10: add select SND_PCM to fix build error
  staging: usbip: vhci: fix oops on subsequent attach
  staging: ft1000: Remove unnecessary EXPORT_SYMBOLs
  staging: rts_pstor: use #ifdef instead of #if
  staging: rts_pstor: Add <linux/vmalloc.h>
  staging: gma500: Depend on X86
  staging: olpc: Add <linux/delay.h>
parents 0ecb063a 9005fcd8
......@@ -2288,7 +2288,3 @@ struct net_device *init_ft1000_card(struct pcmcia_device *link,
free_netdev(dev);
return NULL;
}
EXPORT_SYMBOL(init_ft1000_card);
EXPORT_SYMBOL(stop_ft1000_card);
EXPORT_SYMBOL(flarion_ft1000_cnt);
......@@ -214,6 +214,3 @@ void ft1000CleanupProc(struct net_device *dev)
remove_proc_entry(FT1000_PROC, init_net.proc_net);
unregister_netdevice_notifier(&ft1000_netdev_notifier);
}
EXPORT_SYMBOL(ft1000InitProc);
EXPORT_SYMBOL(ft1000CleanupProc);
config DRM_PSB
tristate "Intel GMA500 KMS Framebuffer"
depends on DRM && PCI
depends on DRM && PCI && X86
select FB_CFB_COPYAREA
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
......
......@@ -28,6 +28,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/file.h>
#include <asm/mrst.h>
#include <sound/pcm.h>
......
......@@ -29,6 +29,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/file.h>
#include "intel_sst.h"
#include "intelmid_snd_control.h"
......
......@@ -12,6 +12,7 @@
*/
#include <linux/cs5535.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <asm/olpc.h>
#include "olpc_dcon.h"
......
......@@ -28,7 +28,7 @@
#define RTSX_STOR "rts_pstor: "
#if CONFIG_RTS_PSTOR_DEBUG
#ifdef CONFIG_RTS_PSTOR_DEBUG
#define RTSX_DEBUGP(x...) printk(KERN_DEBUG RTSX_STOR x)
#define RTSX_DEBUGPN(x...) printk(KERN_DEBUG x)
#define RTSX_DEBUGPX(x...) printk(x)
......
......@@ -23,6 +23,7 @@
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
......
......@@ -24,6 +24,7 @@
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
......@@ -1311,11 +1312,11 @@ void rtsx_polling_func(struct rtsx_chip *chip)
#ifdef SUPPORT_OCP
if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
#if CONFIG_RTS_PSTOR_DEBUG
#ifdef CONFIG_RTS_PSTOR_DEBUG
if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER | MS_OC_NOW | MS_OC_EVER)) {
RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
}
#endif
#endif
if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
if (chip->card_exist & SD_CARD) {
......
......@@ -23,6 +23,7 @@
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
......
......@@ -909,7 +909,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
} else {
#if CONFIG_RTS_PSTOR_DEBUG
#ifdef CONFIG_RTS_PSTOR_DEBUG
rtsx_read_register(chip, SD_VP_CTL, &val);
RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
rtsx_read_register(chip, SD_DCMPS_CTL, &val);
......@@ -958,7 +958,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
return STATUS_SUCCESS;
Fail:
#if CONFIG_RTS_PSTOR_DEBUG
#ifdef CONFIG_RTS_PSTOR_DEBUG
rtsx_read_register(chip, SD_VP_CTL, &val);
RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
rtsx_read_register(chip, SD_DCMPS_CTL, &val);
......
......@@ -82,7 +82,7 @@ do { \
#define TRACE_GOTO(chip, label) goto label
#endif
#if CONFIG_RTS_PSTOR_DEBUG
#ifdef CONFIG_RTS_PSTOR_DEBUG
static inline void rtsx_dump(u8 *buf, int buf_len)
{
int i;
......
......@@ -23,6 +23,7 @@
#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
#include "rtsx.h"
#include "rtsx_transport.h"
......
......@@ -2,6 +2,7 @@ config SOLO6X10
tristate "Softlogic 6x10 MPEG codec cards"
depends on PCI && VIDEO_DEV && SND && I2C
select VIDEOBUF_DMA_SG
select SND_PCM
---help---
This driver supports the Softlogic based MPEG-4 and h.264 codec
codec cards.
......@@ -876,7 +876,9 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
}
/* kill threads related to this sdev, if v.c. exists */
if (vdev->ud.tcp_rx)
kthread_stop(vdev->ud.tcp_rx);
if (vdev->ud.tcp_tx)
kthread_stop(vdev->ud.tcp_tx);
usbip_uinfo("stop threads\n");
......@@ -949,9 +951,6 @@ static void vhci_device_init(struct vhci_device *vdev)
{
memset(vdev, 0, sizeof(*vdev));
vdev->ud.tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
vdev->ud.tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
vdev->ud.side = USBIP_VHCI;
vdev->ud.status = VDEV_ST_NULL;
/* vdev->ud.lock = SPIN_LOCK_UNLOCKED; */
......
......@@ -21,6 +21,7 @@
#include "vhci.h"
#include <linux/in.h>
#include <linux/kthread.h>
/* TODO: refine locking ?*/
......@@ -220,13 +221,13 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
vdev->ud.tcp_socket = socket;
vdev->ud.status = VDEV_ST_NOTASSIGNED;
wake_up_process(vdev->ud.tcp_rx);
wake_up_process(vdev->ud.tcp_tx);
spin_unlock(&vdev->ud.lock);
spin_unlock(&the_controller->lock);
/* end the lock */
vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
rh_port_connect(rhport, speed);
return count;
......
......@@ -273,7 +273,7 @@ int prism2_del_key(struct wiphy *wiphy, struct net_device *dev,
}
int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_index)
u8 key_index, bool unicast, bool multicast)
{
wlandevice_t *wlandev = dev->ml_priv;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment