Commit 58ba006b authored by Michael Krufky's avatar Michael Krufky Committed by Linus Torvalds

[PATCH] dvb: LGDT3302 QAM256 initialization fix

- Initialize all non mutually exclusive variables
  without regard to the mode selected.
- Do a software reset each time the parameters are
  set, regardless of whether anything changes.
  This may allow an application to recover from a
  hung condition.
- Improved error reporting.
- Removed $Id:$
Signed-off-by: default avatarMac Michaels <wmichaels1@earthlink.net>
Signed-off-by: default avatarMichael Krufky <mkrufky@m1k.net>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 67bc4eb0
/*
* $Id: lgdt3302.c,v 1.5 2005/07/07 03:47:15 mkrufky Exp $
*
* Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM
*
* Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
......@@ -83,6 +81,9 @@ static int i2c_writebytes (struct lgdt3302_state* state,
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
} else {
......@@ -96,6 +97,9 @@ static int i2c_writebytes (struct lgdt3302_state* state,
tmp[1] = buf[i];
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
tmp[0]++;
......@@ -218,6 +222,8 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
/* Change only if we are actually changing the modulation */
if (state->current_modulation != param->u.vsb.modulation) {
int value;
switch(param->u.vsb.modulation) {
case VSB_8:
dprintk("%s: VSB_8 MODE\n", __FUNCTION__);
......@@ -266,17 +272,12 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
i2c_writebytes(state, state->config->demod_address,
demux_ctrl_cfg, sizeof(demux_ctrl_cfg));
if (param->u.vsb.modulation == VSB_8) {
/* Initialization for VSB modes only */
/* Change the value of NCOCTFV[25:0]of carrier
recovery center frequency register for VSB */
/* Change the value of NCOCTFV[25:0] of carrier
recovery center frequency register */
i2c_writebytes(state, state->config->demod_address,
vsb_freq_cfg, sizeof(vsb_freq_cfg));
} else {
/* Initialization for QAM modes only */
/* Set the value of 'INLVTHD' register 0x2a/0x2c
to value from 'IFACC' register 0x39/0x3b -1 */
int value;
i2c_selectreadbytes(state, AGC_RFIF_ACC0,
&agc_delay_cfg[1], 3);
value = ((agc_delay_cfg[1] & 0x0f) << 8) | agc_delay_cfg[3];
......@@ -292,10 +293,8 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
of inner AGC loop filter bandwith */
i2c_writebytes(state, state->config->demod_address,
agc_loop_cfg, sizeof(agc_loop_cfg));
}
state->config->set_ts_params(fe, 0);
lgdt3302_SwReset(state);
state->current_modulation = param->u.vsb.modulation;
}
......@@ -311,11 +310,10 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
i2c_readbytes(state, state->config->pll_address, buf, 1);
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
lgdt3302_SwReset(state);
/* Update current frequency */
state->current_frequency = param->frequency;
}
lgdt3302_SwReset(state);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment