Merge branch 'restart-cleanup' into restart

arch/arm/mach-clps711x/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= irq.o mm.o time.o
+obj-y			:= common.o
 obj-m			:=
 obj-n			:=
 obj-			:=

arch/arm/mach-clps711x/irq.c → arch/arm/mach-clps711x/common.c

 /*
- *  linux/arch/arm/mach-clps711x/irq.c
+ *  linux/arch/arm/mach-clps711x/core.c
  *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  Core support for the CLPS711x-based machines.
+ *
+ *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,16 +19,42 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/list.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/timex.h>
 
-#include <asm/mach/irq.h>
+#include <asm/sizes.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-
+#include <asm/leds.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
 #include <asm/hardware/clps7111.h>
 
+/*
+ * This maps the generic CLPS711x registers
+ */
+static struct map_desc clps711x_io_desc[] __initdata = {
+	{
+		.virtual	= CLPS7111_VIRT_BASE,
+		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init clps711x_map_io(void)
+{
+	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
+}
+
 static void int1_mask(struct irq_data *d)
 {
 	u32 intmr1;
@@ -112,15 +140,15 @@ void __init clps711x_init_irq(void)
 
 	for (i = 0; i < NR_IRQS; i++) {
 	        if (INT1_IRQS & (1 << i)) {
-	        	irq_set_chip_and_handler(i, &int1_chip,
+			irq_set_chip_and_handler(i, &int1_chip,
 						 handle_level_irq);
-	        	set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 		}
 		if (INT2_IRQS & (1 << i)) {
 			irq_set_chip_and_handler(i, &int2_chip,
 						 handle_level_irq);
 			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		}			
+		}
 	}
 
 	/*
@@ -141,3 +169,54 @@ void __init clps711x_init_irq(void)
 	clps_writel(0, SYNCIO);
 	clps_writel(0, KBDEOI);
 }
+
+/*
+ * gettimeoffset() returns time since last timer tick, in usecs.
+ *
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy.
+ */
+static unsigned long clps711x_gettimeoffset(void)
+{
+	unsigned long hwticks;
+	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
+	return (hwticks * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
+{
+	timer_tick();
+	return IRQ_HANDLED;
+}
+
+static struct irqaction clps711x_timer_irq = {
+	.name		= "CLPS711x Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= p720t_timer_interrupt,
+};
+
+static void __init clps711x_timer_init(void)
+{
+	struct timespec tv;
+	unsigned int syscon;
+
+	syscon = clps_readl(SYSCON1);
+	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
+	clps_writel(syscon, SYSCON1);
+
+	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
+
+	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
+
+	tv.tv_nsec = 0;
+	tv.tv_sec = clps_readl(RTCDR);
+	do_settimeofday(&tv);
+}
+
+struct sys_timer clps711x_timer = {
+	.init		= clps711x_timer_init,
+	.offset		= clps711x_gettimeoffset,
+};

arch/arm/mach-clps711x/mm.c

-/*
- *  linux/arch/arm/mach-clps711x/mm.c
- *
- *  Generic MM setup for the CLPS711x-based machines.
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
-	{
-		.virtual	= CLPS7111_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init clps711x_map_io(void)
-{
-	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}

arch/arm/mach-clps711x/time.c

-/*
- *  linux/arch/arm/mach-clps711x/time.c
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-#include <asm/mach/time.h>
-
-
-/*
- * gettimeoffset() returns time since last timer tick, in usecs.
- *
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy.
- */
-static unsigned long clps711x_gettimeoffset(void)
-{
-	unsigned long hwticks;
-	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
-	return (hwticks * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction clps711x_timer_irq = {
-	.name		= "CLPS711x Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= p720t_timer_interrupt,
-};
-
-static void __init clps711x_timer_init(void)
-{
-	struct timespec tv;
-	unsigned int syscon;
-
-	syscon = clps_readl(SYSCON1);
-	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
-	clps_writel(syscon, SYSCON1);
-
-	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
-
-	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = clps_readl(RTCDR);
-	do_settimeofday(&tv);
-}
-
-struct sys_timer clps711x_timer = {
-	.init		= clps711x_timer_init,
-	.offset		= clps711x_gettimeoffset,
-};

arch/arm/mach-ep93xx/include/mach/system.h

@@ -11,8 +11,6 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	local_irq_disable();
-
 	/*
 	 * Set then clear the SWRST bit to initiate a software reset
 	 */

arch/arm/mach-iop32x/include/mach/system.h

@@ -18,8 +18,6 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	local_irq_disable();
-
 	if (machine_is_n2100()) {
 		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
 		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);

arch/arm/mach-ixp2000/include/mach/system.h

@@ -19,8 +19,6 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	local_irq_disable();
-
 	/*
 	 * Reset flash banking register so that we are pointing at
 	 * RedBoot bank.

arch/arm/mach-lpc32xx/include/mach/system.h

@@ -33,9 +33,6 @@ static inline void arch_reset(char mode, const char *cmd)
 	case 'h':
 		printk(KERN_CRIT "RESET: Rebooting system\n");
 
-		/* Disable interrupts */
-		local_irq_disable();
-
 		lpc32xx_watchdog_reset();
 		break;
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -35,7 +35,7 @@
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <mach/camera.h>
 
 #include <mach/ams-delta-fiq.h>

arch/arm/mach-omap1/board-fsample.c

@@ -32,7 +32,7 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 
 /* fsample is pretty close to p2-sample */

arch/arm/mach-omap1/board-generic.c

@@ -25,7 +25,7 @@
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 
 /* assume no Mini-AB port */
 

arch/arm/mach-omap1/board-h2.c

@@ -43,7 +43,7 @@
 #include <plat/irda.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/flash.h>
 
 #include "board-h2.h"

arch/arm/mach-omap1/board-h3.c

@@ -45,7 +45,7 @@
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/dma.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/flash.h>
 
 #include "board-h3.h"

arch/arm/mach-omap1/board-htcherald.c

@@ -41,7 +41,7 @@
 #include <asm/mach/arch.h>
 
 #include <plat/omap7xx.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/usb.h>

arch/arm/mach-omap1/board-innovator.c

@@ -37,7 +37,7 @@
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/mmc.h>
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */

arch/arm/mach-omap1/board-nokia770.c

@@ -30,7 +30,7 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/hwa742.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>

arch/arm/mach-omap1/board-osk.c

@@ -51,7 +51,7 @@
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
-#include <plat/common.h>
+#include "common.h"
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300

arch/arm/mach-omap1/board-palmte.c

@@ -41,7 +41,7 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1

arch/arm/mach-omap1/board-palmtt.c

@@ -39,7 +39,7 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>

arch/arm/mach-omap1/board-palmz71.c

@@ -41,7 +41,7 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>

arch/arm/mach-omap1/board-perseus2.c

@@ -32,7 +32,7 @@
 #include <plat/fpga.h>
 #include <plat/flash.h>
 #include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 
 static const unsigned int p2_keymap[] = {

arch/arm/mach-omap1/board-sx1.c

@@ -40,7 +40,7 @@
 #include <plat/usb.h>
 #include <plat/tc.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>
 

arch/arm/mach-omap1/board-voiceblue.c

@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board-voiceblue.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>

arch/arm/mach-omap1/common.h

+/*
+ *
+ * Header for code common to all OMAP1 machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
+#define __ARCH_ARM_MACH_OMAP1_COMMON_H
+
+#include <plat/common.h>
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap7xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
+void omap1_init_irq(void);
+
+extern struct sys_timer omap1_timer;
+extern bool omap_32k_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */

arch/arm/mach-omap1/devices.c

@@ -22,7 +22,7 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>

arch/arm/mach-omap1/time.c

@@ -54,7 +54,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #ifdef CONFIG_OMAP_MPU_TIMER
 

arch/arm/mach-omap1/timer32k.c

@@ -52,7 +52,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/dmtimer.h>
 
 /*

arch/arm/mach-omap2/board-2430sdp.c

@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/gpmc-smc91x.h>

arch/arm/mach-omap2/board-3430sdp.c

@@ -33,7 +33,7 @@
 #include <plat/mcspi.h>
 #include <plat/board.h>
 #include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-3630sdp.c

@@ -16,7 +16,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/gpmc-smc91x.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-4430sdp.c

@@ -27,13 +27,12 @@
 #include <linux/leds_pwm.h>
 
 #include <mach/hardware.h>
-#include <mach/omap4-common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>

arch/arm/mach-omap2/board-am3517crane.c

@@ -27,7 +27,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-am3517evm.c

@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>

arch/arm/mach-omap2/board-apollon.c

@@ -37,7 +37,7 @@
 #include <plat/led.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-cm-t35.c

@@ -37,7 +37,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/nand.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-cm-t3517.c

@@ -39,7 +39,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 #include <plat/nand.h>
 #include <plat/gpmc.h>

arch/arm/mach-omap2/board-devkit8000.c

@@ -41,7 +41,7 @@
 #include <asm/mach/flash.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-generic.c

@@ -20,8 +20,7 @@
 #include <asm/mach/arch.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
-#include <mach/omap4-common.h>
+#include "common.h"
 #include "common-board-devices.h"
 
 /*

arch/arm/mach-omap2/board-h4.c

@@ -34,7 +34,7 @@
 
 #include <plat/usb.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>

arch/arm/mach-omap2/board-igep0020.c

@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-ldp.c

@@ -36,7 +36,7 @@
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <mach/board-zoom.h>
 

arch/arm/mach-omap2/board-n8x0.c

@@ -26,7 +26,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/menelaus.h>
 #include <mach/irqs.h>
 #include <plat/mcspi.h>

arch/arm/mach-omap2/board-omap3beagle.c

@@ -40,7 +40,7 @@
 #include <asm/mach/flash.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-dvi.h>
 #include <plat/gpmc.h>

arch/arm/mach-omap2/board-omap3evm.c

@@ -43,7 +43,7 @@
 
 #include <plat/board.h>
 #include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-dvi.h>

arch/arm/mach-omap2/board-omap3logic.c

@@ -40,7 +40,7 @@
 
 #include <plat/mux.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>

arch/arm/mach-omap2/board-omap3pandora.c

@@ -41,7 +41,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-omap3stalker.c

@@ -35,7 +35,7 @@
 #include <asm/mach/flash.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -44,7 +44,7 @@
 #include <asm/mach/flash.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-omap4panda.c

@@ -30,14 +30,13 @@
 #include <linux/wl12xx.h>
 
 #include <mach/hardware.h>
-#include <mach/omap4-common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <video/omapdss.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-dvi.h>

arch/arm/mach-omap2/board-overo.c

@@ -43,7 +43,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-dvi.h>

arch/arm/mach-omap2/board-rm680.c

@@ -25,7 +25,7 @@
 #include <plat/mmc.h>
 #include <plat/usb.h>
 #include <plat/gpmc.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/onenand.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -27,7 +27,7 @@
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <plat/onenand.h>

arch/arm/mach-omap2/board-rx51.c

@@ -25,7 +25,7 @@
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-ti8168evm.c

@@ -22,7 +22,7 @@
 
 #include <plat/irqs.h>
 #include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
 
 static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
 };

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>

arch/arm/mach-omap2/board-zoom.c

@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/usb.h>
 

arch/arm/mach-omap2/cm2xxx_3xxx.c

@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "cm.h"
 #include "cm2xxx_3xxx.h"

arch/arm/mach-omap2/cm44xx.c

@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "cm.h"
 #include "cm1_44xx.h"

arch/arm/mach-omap2/cminst44xx.c

@@ -20,7 +20,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "cm.h"
 #include "cm1_44xx.h"

arch/arm/mach-omap2/common.c

@@ -17,7 +17,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/mux.h>
 

arch/arm/mach-omap2/common.h

+/*
+ * Header for code common to all OMAP2+ machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+
+#include <linux/delay.h>
+#include <plat/common.h>
+
+#ifdef CONFIG_SOC_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
+extern void omap2_init_common_infrastructure(void);
+
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
+
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void omap3_init_early(void);	/* Do not use this one */
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
+struct omap_globals {
+	u32		class;		/* OMAP class to detect */
+	void __iomem	*tap;		/* Control module ID code */
+	void __iomem	*sdrc;           /* SDRAM Controller */
+	void __iomem	*sms;            /* SDRAM Memory Scheduler */
+	void __iomem	*ctrl;           /* System Control Module */
+	void __iomem	*ctrl_pad;	/* PAD Control Module */
+	void __iomem	*prm;            /* Power and Reset Management */
+	void __iomem	*cm;             /* Clock Management */
+	void __iomem	*cm2;
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_3xxx(void);
+void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+void omap242x_map_io(void);
+void omap243x_map_io(void);
+void omap3_map_io(void);
+void omap4_map_io(void);
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_iva_device(void);
+extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
+
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti816x_init_irq(void);
+extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
+
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define do_wfi()			\
+		__asm__ __volatile__ (".word	0xe320f003" : : : "memory")
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __iomem *gic_dist_base_addr;
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
+
+#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

arch/arm/mach-omap2/control.c

@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/sdrc.h>
 
 #include "cm-regbits-34xx.h"

arch/arm/mach-omap2/i2c.c

@@ -21,7 +21,7 @@
 
 #include <plat/cpu.h>
 #include <plat/i2c.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/omap_hwmod.h>
 
 #include "mux.h"

arch/arm/mach-omap2/id.c

@@ -21,7 +21,7 @@
 
 #include <asm/cputype.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 
 #include <mach/id.h>

arch/arm/mach-omap2/include/mach/omap4-common.h

-/*
- * omap4-common.h: OMAP4 specific common header file
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * Author:
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_OMAP4_COMMON_H
-#define OMAP_ARCH_OMAP4_COMMON_H
-
-/*
- * wfi used in low power code. Directly opcode is used instead
- * of instruction to avoid mulit-omap build break
- */
-#ifdef CONFIG_THUMB2_KERNEL
-#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
-#else
-#define do_wfi()			\
-		__asm__ __volatile__ (".word	0xe320f003" : : : "memory")
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-extern void __iomem *l2cache_base;
-#endif
-
-extern void __iomem *gic_dist_base_addr;
-
-extern void __init gic_init_irq(void);
-extern void omap_smc1(u32 fn, u32 arg);
-
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-#endif
-#endif

arch/arm/mach-omap2/io.c

@@ -35,7 +35,7 @@
 #include "clock3xxx.h"
 #include "clock44xx.h"
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/omap-pm.h>
 #include "voltage.h"
 #include "powerdomain.h"
@@ -43,7 +43,7 @@
 #include "clockdomain.h"
 #include <plat/omap_hwmod.h>
 #include <plat/multi.h>
-#include <plat/common.h>
+#include "common.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the

arch/arm/mach-omap2/omap-hotplug.c

@@ -19,7 +19,8 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
 
 int platform_cpu_kill(unsigned int cpu)
 {

arch/arm/mach-omap2/omap-smp.c

@@ -24,7 +24,8 @@
 #include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
 
 /* SCU base address */
 static void __iomem *scu_base;

arch/arm/mach-omap2/omap4-common.c

@@ -22,7 +22,8 @@
 #include <plat/irqs.h>
 
 #include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
 
 #ifdef CONFIG_CACHE_L2X0
 void __iomem *l2cache_base;

arch/arm/mach-omap2/omap_hwmod.c

@@ -137,7 +137,7 @@
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 #include "clockdomain.h"
 #include "powerdomain.h"

arch/arm/mach-omap2/pm.c

@@ -18,7 +18,7 @@
 
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>
-#include <plat/common.h>
+#include "common.h"
 
 #include "voltage.h"
 #include "powerdomain.h"

arch/arm/mach-omap2/pm24xx.c

@@ -42,6 +42,7 @@
 #include <plat/dma.h>
 #include <plat/board.h>
 
+#include "common.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm2xxx_3xxx.h"

arch/arm/mach-omap2/pm34xx.c

@@ -42,6 +42,7 @@
 #include <plat/gpmc.h>
 #include <plat/dma.h>
 
+#include "common.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"

arch/arm/mach-omap2/pm44xx.c

@@ -16,8 +16,8 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
+#include "common.h"
 #include "powerdomain.h"
-#include <mach/omap4-common.h>
 
 struct power_state {
 	struct powerdomain *pwrdm;

arch/arm/mach-omap2/prcm.c

@@ -26,7 +26,7 @@
 #include <linux/export.h>
 
 #include <mach/system.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/prcm.h>
 #include <plat/irqs.h>
 

arch/arm/mach-omap2/prcm_mpu44xx.c

@@ -15,7 +15,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prcm_mpu44xx.h"
 #include "cm-regbits-44xx.h"

arch/arm/mach-omap2/prm2xxx_3xxx.c

@@ -16,7 +16,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 #include <plat/prcm.h>
 

arch/arm/mach-omap2/prm44xx.c

@@ -17,7 +17,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 #include <plat/prcm.h>
 

arch/arm/mach-omap2/prminst44xx.c

@@ -16,7 +16,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm44xx.h"
 #include "prminst44xx.h"

arch/arm/mach-omap2/sdram-nokia.c

@@ -18,7 +18,7 @@
 #include <linux/io.h>
 
 #include <plat/io.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/clock.h>
 #include <plat/sdrc.h>
 

arch/arm/mach-omap2/sdrc.c

@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/clock.h>
 #include <plat/sram.h>
 

arch/arm/mach-omap2/sdrc2xxx.c

@@ -24,7 +24,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/clock.h>
 #include <plat/sram.h>
 

arch/arm/mach-omap2/serial.c

@@ -33,7 +33,7 @@
 #include <plat/omap-serial.h>
 #endif
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/board.h>
 #include <plat/clock.h>
 #include <plat/dma.h>

arch/arm/mach-omap2/smartreflex.c

@@ -26,7 +26,7 @@
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "pm.h"
 #include "smartreflex.h"

arch/arm/mach-omap2/timer.c

@@ -41,7 +41,7 @@
 #include <plat/dmtimer.h>
 #include <asm/localtimer.h>
 #include <asm/sched_clock.h>
-#include <plat/common.h>
+#include "common.h"
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>

arch/arm/mach-omap2/vc3xxx_data.c

@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm-regbits-34xx.h"
 #include "voltage.h"

arch/arm/mach-omap2/vc44xx_data.c

@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"

arch/arm/mach-omap2/voltage.c

@@ -27,7 +27,7 @@
 #include <linux/slab.h>
 #include <linux/clk.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm-regbits-34xx.h"
 #include "prm-regbits-44xx.h"

arch/arm/mach-omap2/voltagedomains3xxx_data.c

@@ -18,7 +18,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 #include <plat/cpu.h>
 
 #include "prm-regbits-34xx.h"

arch/arm/mach-omap2/voltagedomains44xx_data.c

@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm-regbits-44xx.h"
 #include "prm44xx.h"

arch/arm/mach-omap2/vp.c

 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "voltage.h"
 #include "vp.h"

arch/arm/mach-omap2/vp3xxx_data.c

@@ -19,7 +19,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm-regbits-34xx.h"
 #include "voltage.h"

arch/arm/mach-omap2/vp44xx_data.c

@@ -19,7 +19,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 
-#include <plat/common.h>
+#include "common.h"
 
 #include "prm44xx.h"
 #include "prm-regbits-44xx.h"

arch/arm/mach-pxa/poodle.c

@@ -420,17 +420,11 @@ static void poodle_poweroff(void)
 	arm_machine_restart('h', NULL);
 }
 
-static void poodle_restart(char mode, const char *cmd)
-{
-	arm_machine_restart('h', cmd);
-}
-
 static void __init poodle_init(void)
 {
 	int ret = 0;
 
 	pm_power_off = poodle_poweroff;
-	arm_pm_restart = poodle_restart;
 
 	PCFR |= PCFR_OPDE;
 

arch/arm/mach-shark/core.c

@@ -29,7 +29,6 @@
 void arch_reset(char mode, const char *cmd)
 {
         short temp;
-        local_irq_disable();
         /* Reset the Machine via pc[3] of the sequoia chipset */
         outw(0x09,0x24);
         temp=inw(0x26);

arch/arm/mach-u300/include/mach/system.h

@@ -27,8 +27,6 @@ static void arch_reset(char mode, const char *cmd)
 	case 's':
 	case 'h':
 		printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
-		/* Disable interrupts */
-		local_irq_disable();
 #ifdef CONFIG_COH901327_WATCHDOG
 		coh901327_watchdog_reset();
 #endif

arch/arm/mach-w90x900/irq.c

@@ -28,6 +28,8 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
+#include "nuc9xx.h"
+
 struct group_irq {
 	unsigned long		gpen;
 	unsigned int		enabled;

arch/arm/mach-w90x900/nuc910.h

@@ -12,14 +12,7 @@
  * published by the Free Software Foundation.
  *
  */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
 
 /* extern file from nuc910.c */
 

arch/arm/mach-w90x900/nuc950.h

@@ -12,14 +12,7 @@
  * published by the Free Software Foundation.
  *
  */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
 
 /* extern file from nuc950.c */
 

arch/arm/mach-w90x900/nuc960.h

@@ -12,14 +12,7 @@
  * published by the Free Software Foundation.
  *
  */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
 
 /* extern file from nuc960.c */
 

arch/arm/mach-w90x900/nuc9xx.h

+/*
+ * arch/arm/mach-w90x900/nuc9xx.h
+ *
+ * Copied from nuc910.h, which had:
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;

arch/arm/mach-w90x900/time.c

@@ -33,6 +33,8 @@
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
+#include "nuc9xx.h"
+
 #define RESETINT	0x1f
 #define PERIOD		(0x01 << 27)
 #define ONESHOT		(0x00 << 27)

arch/arm/plat-omap/include/plat/common.h

@@ -27,94 +27,12 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
 
-#include <linux/delay.h>
-
 #include <plat/i2c.h>
 
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap1_timer;
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap4_timer;
-extern bool omap_32k_timer_init(void);
 extern int __init omap_init_clocksource_32k(void);
 extern unsigned long long notrace omap_32k_sched_clock(void);
 
 extern void omap_reserve(void);
-
-void omap2420_init_early(void);
-void omap2430_init_early(void);
-void omap3430_init_early(void);
-void omap35xx_init_early(void);
-void omap3630_init_early(void);
-void omap3_init_early(void);	/* Do not use this one */
-void am35xx_init_early(void);
-void ti816x_init_early(void);
-void omap4430_init_early(void);
-
 void omap_sram_init(void);
 
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
-	u32		class;		/* OMAP class to detect */
-	void __iomem	*tap;		/* Control module ID code */
-	void __iomem	*sdrc;           /* SDRAM Controller */
-	void __iomem	*sms;            /* SDRAM Memory Scheduler */
-	void __iomem	*ctrl;           /* System Control Module */
-	void __iomem	*ctrl_pad;	/* PAD Control Module */
-	void __iomem	*prm;            /* Power and Reset Management */
-	void __iomem	*cm;             /* Clock Management */
-	void __iomem	*cm2;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_ti816x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_sdrc(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void omap4_map_io(void);
-
-
-/**
- * omap_test_timeout - busy-loop, testing a condition
- * @cond: condition to test until it evaluates to true
- * @timeout: maximum number of microseconds in the timeout
- * @index: loop index (integer)
- *
- * Loop waiting for @cond to become true or until at least @timeout
- * microseconds have passed.  To use, define some integer @index in the
- * calling code.  After running, if @index == @timeout, then the loop has
- * timed out.
- */
-#define omap_test_timeout(cond, timeout, index)			\
-({								\
-	for (index = 0; index < timeout; index++) {		\
-		if (cond)					\
-			break;					\
-		udelay(1);					\
-	}							\
-})
-
-extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_iva_device(void);
-extern struct device *omap2_get_l3_device(void);
-extern struct device *omap4_get_dsp_device(void);
-
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */

arch/arm/plat-omap/include/plat/io.h

@@ -257,74 +257,6 @@ extern void omap_writew(u16 v, u32 pa);
 extern void omap_writel(u32 v, u32 pa);
 
 struct omap_sdrc_params;
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap15xx_map_io(void);
-#else
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
-void omap1_init_early(void);
-
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPTI816X
-extern void omapti816x_map_common_io(void);
-#else
-static inline void omapti816x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
-
-extern void omap2_init_common_infrastructure(void);
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
 

arch/arm/plat-omap/include/plat/irqs.h

@@ -438,16 +438,6 @@
 
 #ifndef __ASSEMBLY__
 extern void __iomem *omap_irq_base;
-void omap1_init_irq(void);
-void omap2_init_irq(void);
-void omap3_init_irq(void);
-void ti816x_init_irq(void);
-extern int omap_irq_pending(void);
-void omap_intc_save_context(void);
-void omap_intc_restore_context(void);
-void omap3_intc_suspend(void);
-void omap3_intc_prepare_idle(void);
-void omap3_intc_resume_idle(void);
 #endif
 
 #include <mach/hardware.h>