Commit 59ca25b7 authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by Mauro Carvalho Chehab

[media] V4L: ov6650: support the new mbus-config subdev ops

Extend the driver to also support [gs]_mbus_config() subdevice video
operations.
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 93ac81dc
...@@ -30,9 +30,9 @@ ...@@ -30,9 +30,9 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <media/soc_camera.h> #include <media/soc_camera.h>
#include <media/soc_mediabus.h>
#include <media/v4l2-chip-ident.h> #include <media/v4l2-chip-ident.h>
/* Register definitions */ /* Register definitions */
#define REG_GAIN 0x00 /* range 00 - 3F */ #define REG_GAIN 0x00 /* range 00 - 3F */
#define REG_BLUE 0x01 #define REG_BLUE 0x01
...@@ -1111,6 +1111,55 @@ static struct v4l2_subdev_core_ops ov6650_core_ops = { ...@@ -1111,6 +1111,55 @@ static struct v4l2_subdev_core_ops ov6650_core_ops = {
#endif #endif
}; };
static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct soc_camera_device *icd = client->dev.platform_data;
struct soc_camera_link *icl = to_soc_camera_link(icd);
cfg->flags = V4L2_MBUS_MASTER |
V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
V4L2_MBUS_DATA_ACTIVE_HIGH;
cfg->type = V4L2_MBUS_PARALLEL;
cfg->flags = soc_camera_apply_board_flags(icl, cfg);
return 0;
}
static int ov6650_s_mbus_config(struct v4l2_subdev *sd,
const struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct soc_camera_device *icd = client->dev.platform_data;
struct soc_camera_link *icl = to_soc_camera_link(icd);
unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
int ret;
if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
else
ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
if (ret)
return ret;
if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
else
ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
if (ret)
return ret;
if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
else
ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
return ret;
}
static struct v4l2_subdev_video_ops ov6650_video_ops = { static struct v4l2_subdev_video_ops ov6650_video_ops = {
.s_stream = ov6650_s_stream, .s_stream = ov6650_s_stream,
.g_mbus_fmt = ov6650_g_fmt, .g_mbus_fmt = ov6650_g_fmt,
...@@ -1122,6 +1171,8 @@ static struct v4l2_subdev_video_ops ov6650_video_ops = { ...@@ -1122,6 +1171,8 @@ static struct v4l2_subdev_video_ops ov6650_video_ops = {
.s_crop = ov6650_s_crop, .s_crop = ov6650_s_crop,
.g_parm = ov6650_g_parm, .g_parm = ov6650_g_parm,
.s_parm = ov6650_s_parm, .s_parm = ov6650_s_parm,
.g_mbus_config = ov6650_g_mbus_config,
.s_mbus_config = ov6650_s_mbus_config,
}; };
static struct v4l2_subdev_ops ov6650_subdev_ops = { static struct v4l2_subdev_ops ov6650_subdev_ops = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment