Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

net/mac80211/cfg.c

@@ -3290,14 +3290,19 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy,
 	int ret = -ENODATA;
 
 	rcu_read_lock();
-	if (local->use_chanctx) {
 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 	if (chanctx_conf) {
 		*chandef = chanctx_conf->def;
 		ret = 0;
-		}
-	} else if (local->open_count == local->monitors) {
+	} else if (local->open_count > 0 &&
+		   local->open_count == local->monitors &&
+		   sdata->vif.type == NL80211_IFTYPE_MONITOR) {
+		if (local->use_chanctx)
 			*chandef = local->monitor_chandef;
+		else
+			cfg80211_chandef_create(chandef,
+						local->_oper_channel,
+						local->_oper_channel_type);
 		ret = 0;
 	}
 	rcu_read_unlock();

net/mac80211/iface.c

@@ -541,6 +541,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
 
 		ieee80211_adjust_monitor_flags(sdata, 1);
 		ieee80211_configure_filter(local);
+		mutex_lock(&local->mtx);
+		ieee80211_recalc_idle(local);
+		mutex_unlock(&local->mtx);
 
 		netif_carrier_on(dev);
 		break;
@@ -812,6 +815,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 
 		ieee80211_adjust_monitor_flags(sdata, -1);
 		ieee80211_configure_filter(local);
+		mutex_lock(&local->mtx);
+		ieee80211_recalc_idle(local);
+		mutex_unlock(&local->mtx);
 		break;
 	case NL80211_IFTYPE_P2P_DEVICE:
 		/* relies on synchronize_rcu() below */

net/mac80211/mlme.c

@@ -647,6 +647,9 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
 		our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) &
 								mask) >> shift;
 
+		if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED)
+			continue;
+
 		switch (ap_mcs) {
 		default:
 			if (our_mcs <= ap_mcs)
@@ -3502,6 +3505,14 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	/*
+	 * Stop timers before deleting work items, as timers
+	 * could race and re-add the work-items. They will be
+	 * re-established on connection.
+	 */
+	del_timer_sync(&ifmgd->conn_mon_timer);
+	del_timer_sync(&ifmgd->bcn_mon_timer);
+
 	/*
 	 * we need to use atomic bitops for the running bits
 	 * only because both timers might fire at the same
@@ -3516,13 +3527,9 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 	if (del_timer_sync(&ifmgd->timer))
 		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
 
-	cancel_work_sync(&ifmgd->chswitch_work);
 	if (del_timer_sync(&ifmgd->chswitch_timer))
 		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
-
-	/* these will just be re-established on connection */
-	del_timer_sync(&ifmgd->conn_mon_timer);
-	del_timer_sync(&ifmgd->bcn_mon_timer);
+	cancel_work_sync(&ifmgd->chswitch_work);
 }
 
 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
@@ -4315,6 +4322,17 @@ void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	/*
+	 * Make sure some work items will not run after this,
+	 * they will not do anything but might not have been
+	 * cancelled when disconnecting.
+	 */
+	cancel_work_sync(&ifmgd->monitor_work);
+	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
+	cancel_work_sync(&ifmgd->request_smps_work);
+	cancel_work_sync(&ifmgd->csa_connection_drop_work);
+	cancel_work_sync(&ifmgd->chswitch_work);
+
 	mutex_lock(&ifmgd->mtx);
 	if (ifmgd->assoc_data)
 		ieee80211_destroy_assoc_data(sdata, false);

net/mac80211/tx.c

@@ -2755,6 +2755,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw,
 				cpu_to_le16(IEEE80211_FCTL_MOREDATA);
 		}
 
+		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 			sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
 		if (!ieee80211_tx_prepare(sdata, &tx, skb))
 			break;

net/wireless/core.c

@@ -367,8 +367,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 	rdev->wiphy.rts_threshold = (u32) -1;
 	rdev->wiphy.coverage_class = 0;
 
-	rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH |
-			       NL80211_FEATURE_ADVERTISE_CHAN_LIMITS;
+	rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH;
 
 	return &rdev->wiphy;
 }

net/wireless/nl80211.c

@@ -557,18 +557,6 @@ static int nl80211_msg_put_channel(struct sk_buff *msg,
 	if ((chan->flags & IEEE80211_CHAN_RADAR) &&
 	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
 		goto nla_put_failure;
-	if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) &&
-	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS))
-		goto nla_put_failure;
-	if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) &&
-	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS))
-		goto nla_put_failure;
-	if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) &&
-	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ))
-		goto nla_put_failure;
-	if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) &&
-	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ))
-		goto nla_put_failure;
 
 	if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
 			DBM_TO_MBM(chan->max_power)))
@@ -1310,15 +1298,6 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
 			dev->wiphy.max_acl_mac_addrs))
 		goto nla_put_failure;
 
-	if (dev->wiphy.extended_capabilities &&
-	    (nla_put(msg, NL80211_ATTR_EXT_CAPA,
-		     dev->wiphy.extended_capabilities_len,
-		     dev->wiphy.extended_capabilities) ||
-	     nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK,
-		     dev->wiphy.extended_capabilities_len,
-		     dev->wiphy.extended_capabilities_mask)))
-		goto nla_put_failure;
-
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
@@ -1328,7 +1307,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
 
 static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
 {
-	int idx = 0;
+	int idx = 0, ret;
 	int start = cb->args[0];
 	struct cfg80211_registered_device *dev;
 
@@ -1338,9 +1317,29 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
 			continue;
 		if (++idx <= start)
 			continue;
-		if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
+		ret = nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
 					 cb->nlh->nlmsg_seq, NLM_F_MULTI,
-				       dev) < 0) {
+					 dev);
+		if (ret < 0) {
+			/*
+			 * If sending the wiphy data didn't fit (ENOBUFS or
+			 * EMSGSIZE returned), this SKB is still empty (so
+			 * it's not too big because another wiphy dataset is
+			 * already in the skb) and we've not tried to adjust
+			 * the dump allocation yet ... then adjust the alloc
+			 * size to be bigger, and return 1 but with the empty
+			 * skb. This results in an empty message being RX'ed
+			 * in userspace, but that is ignored.
+			 *
+			 * We can then retry with the larger buffer.
+			 */
+			if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
+			    !skb->len &&
+			    cb->min_dump_alloc < 4096) {
+				cb->min_dump_alloc = 4096;
+				mutex_unlock(&cfg80211_mutex);
+				return 1;
+			}
 			idx--;
 			break;
 		}
@@ -1357,7 +1356,7 @@ static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info)
 	struct sk_buff *msg;
 	struct cfg80211_registered_device *dev = info->user_ptr[0];
 
-	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	msg = nlmsg_new(4096, GFP_KERNEL);
 	if (!msg)
 		return -ENOMEM;