Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits)
  [POWERPC] Convert the cell IOMMU fixed mapping to 16M IOMMU pages
  [POWERPC] Allow for different IOMMU page sizes in cell IOMMU code
  [POWERPC] Cell IOMMU: n_pte_pages is in 4K page units, not IOMMU_PAGE_SIZE
  [POWERPC] Split setup of IOMMU stab and ptab, allocate dynamic/fixed ptabs separately
  [POWERPC] Move allocation of cell IOMMU pad page
  [POWERPC] Remove unused pte_offset variable
  [POWERPC] Use it_offset not pte_offset in cell IOMMU code
  [POWERPC] Clearup cell IOMMU fixed mapping terminology
  [POWERPC] enable hardware watchpoints on cell blades
  [POWERPC] move celleb DABRX definitions
  [POWERPC] OProfile: enable callgraph support for Cell
  [POWERPC] spufs: fix use time accounting on SPE-overcommit
  [POWERPC] spufs: serialize SLB invalidation against SLB loading
  [POWERPC] spufs: invalidate SLB translation before adding a new entry
  [POWERPC] spufs: synchronize IRQ when disabling
  [POWERPC] spufs: fix order of sputrace thread IDs
  [POWERPC] Xilinx: hwicap cleanup
  [POWERPC] 4xx: Use correct board info structure in cuboot wrappers
  [POWERPC] spufs: fix invalid scheduling of forgotten contexts
  [POWERPC] 44x: add missing define TARGET_4xx and TARGET_440GX to cuboot-taishan
  ...

arch/powerpc/boot/cuboot-bamboo.c

@@ -17,6 +17,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 

arch/powerpc/boot/cuboot-ebony.c

@@ -17,6 +17,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 

arch/powerpc/boot/cuboot-katmai.c

@@ -22,6 +22,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 

arch/powerpc/boot/cuboot-taishan.c

@@ -21,7 +21,9 @@
 #include "dcr.h"
 #include "4xx.h"
 
+#define TARGET_4xx
 #define TARGET_44x
+#define TARGET_440GX
 #include "ppcboot.h"
 
 static bd_t bd;

arch/powerpc/boot/cuboot-warp.c

@@ -11,6 +11,7 @@
 #include "4xx.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 

arch/powerpc/boot/dts/haleakala.dts

@@ -235,7 +235,7 @@ PCIE0: pciex@0a0000000 {
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex";
+			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
 			port = <0>; /* port number */
 			reg = <a0000000 20000000	/* Config space access */

arch/powerpc/boot/dts/katmai.dts

@@ -38,8 +38,8 @@ cpu@0 {
 			timebase-frequency = <0>; /* Filled in by zImage */
 			i-cache-line-size = <20>;
 			d-cache-line-size = <20>;
-			i-cache-size = <20000>;
-			d-cache-size = <20000>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};

arch/powerpc/oprofile/op_model_cell.c

@@ -1151,7 +1151,7 @@ static void cell_handle_interrupt(struct pt_regs *regs,
 		for (i = 0; i < num_counters; ++i) {
 			if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i))
 			    && ctr[i].enabled) {
-				oprofile_add_pc(pc, is_kernel, i);
+				oprofile_add_ext_sample(pc, regs, i, is_kernel);
 				cbe_write_ctr(cpu, i, reset_value[i]);
 			}
 		}

arch/powerpc/platforms/52xx/mpc52xx_common.c

@@ -199,6 +199,7 @@ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
 
 	return 0;
 }
+EXPORT_SYMBOL(mpc52xx_set_psc_clkdiv);
 
 /**
  * mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer

arch/powerpc/platforms/cell/iommu.c

@@ -113,7 +113,7 @@
 
 /* IOMMU sizing */
 #define IO_SEGMENT_SHIFT	28
-#define IO_PAGENO_BITS		(IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT)
+#define IO_PAGENO_BITS(shift)	(IO_SEGMENT_SHIFT - (shift))
 
 /* The high bit needs to be set on every DMA address */
 #define SPIDER_DMA_OFFSET	0x80000000ul
@@ -123,7 +123,6 @@ struct iommu_window {
 	struct cbe_iommu *iommu;
 	unsigned long offset;
 	unsigned long size;
-	unsigned long pte_offset;
 	unsigned int ioid;
 	struct iommu_table table;
 };
@@ -200,7 +199,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 		(window->ioid & IOPTE_IOID_Mask);
 #endif
 
-	io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset);
+	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
 	for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE)
 		io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
@@ -232,7 +231,7 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
 		| (window->ioid & IOPTE_IOID_Mask);
 #endif
 
-	io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset);
+	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
 	for (i = 0; i < npages; i++)
 		io_pte[i] = pte;
@@ -307,76 +306,84 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base)
 	return -ENODEV;
 }
 
-static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu,
+static void cell_iommu_setup_stab(struct cbe_iommu *iommu,
 				unsigned long dbase, unsigned long dsize,
 				unsigned long fbase, unsigned long fsize)
 {
 	struct page *page;
-	int i;
-	unsigned long reg, segments, pages_per_segment, ptab_size, stab_size,
-		      n_pte_pages, base;
-
-	base = dbase;
-	if (fsize != 0)
-		base = min(fbase, dbase);
+	unsigned long segments, stab_size;
 
 	segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
-	pages_per_segment = 1ull << IO_PAGENO_BITS;
 
-	pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n",
-			__FUNCTION__, iommu->nid, segments, pages_per_segment);
+	pr_debug("%s: iommu[%d]: segments: %lu\n",
+			__FUNCTION__, iommu->nid, segments);
 
 	/* set up the segment table */
 	stab_size = segments * sizeof(unsigned long);
 	page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size));
 	BUG_ON(!page);
 	iommu->stab = page_address(page);
-	clear_page(iommu->stab);
+	memset(iommu->stab, 0, stab_size);
+}
+
+static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
+		unsigned long base, unsigned long size, unsigned long gap_base,
+		unsigned long gap_size, unsigned long page_shift)
+{
+	struct page *page;
+	int i;
+	unsigned long reg, segments, pages_per_segment, ptab_size,
+		      n_pte_pages, start_seg, *ptab;
+
+	start_seg = base >> IO_SEGMENT_SHIFT;
+	segments  = size >> IO_SEGMENT_SHIFT;
+	pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift);
+	/* PTEs for each segment must start on a 4K bounday */
+	pages_per_segment = max(pages_per_segment,
+				(1 << 12) / sizeof(unsigned long));
 
-	/* ... and the page tables. Since these are contiguous, we can treat
-	 * the page tables as one array of ptes, like pSeries does.
-	 */
 	ptab_size = segments * pages_per_segment * sizeof(unsigned long);
 	pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
 			iommu->nid, ptab_size, get_order(ptab_size));
 	page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
 	BUG_ON(!page);
 
-	iommu->ptab = page_address(page);
-	memset(iommu->ptab, 0, ptab_size);
+	ptab = page_address(page);
+	memset(ptab, 0, ptab_size);
 
-	/* allocate a bogus page for the end of each mapping */
-	page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
-	BUG_ON(!page);
-	iommu->pad_page = page_address(page);
-	clear_page(iommu->pad_page);
-
-	/* number of pages needed for a page table */
-	n_pte_pages = (pages_per_segment *
-		       sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT;
+	/* number of 4K pages needed for a page table */
+	n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
 
 	pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
-			__FUNCTION__, iommu->nid, iommu->stab, iommu->ptab,
+			__FUNCTION__, iommu->nid, iommu->stab, ptab,
 			n_pte_pages);
 
 	/* initialise the STEs */
 	reg = IOSTE_V | ((n_pte_pages - 1) << 5);
 
-	if (IOMMU_PAGE_SIZE == 0x1000)
-		reg |= IOSTE_PS_4K;
-	else if (IOMMU_PAGE_SIZE == 0x10000)
-		reg |= IOSTE_PS_64K;
-	else {
-		extern void __unknown_page_size_error(void);
-		__unknown_page_size_error();
+	switch (page_shift) {
+	case 12: reg |= IOSTE_PS_4K;  break;
+	case 16: reg |= IOSTE_PS_64K; break;
+	case 20: reg |= IOSTE_PS_1M;  break;
+	case 24: reg |= IOSTE_PS_16M; break;
+	default: BUG();
 	}
 
+	gap_base = gap_base >> IO_SEGMENT_SHIFT;
+	gap_size = gap_size >> IO_SEGMENT_SHIFT;
+
 	pr_debug("Setting up IOMMU stab:\n");
-	for (i = base >> IO_SEGMENT_SHIFT; i < segments; i++) {
-		iommu->stab[i] = reg |
-			(__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i);
+	for (i = start_seg; i < (start_seg + segments); i++) {
+		if (i >= gap_base && i < (gap_base + gap_size)) {
+			pr_debug("\toverlap at %d, skipping\n", i);
+			continue;
+		}
+		iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) *
+					(i - start_seg));
 		pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]);
 	}
+
+	return ptab;
 }
 
 static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
@@ -423,7 +430,9 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
 static void cell_iommu_setup_hardware(struct cbe_iommu *iommu,
 	unsigned long base, unsigned long size)
 {
-	cell_iommu_setup_page_tables(iommu, base, size, 0, 0);
+	cell_iommu_setup_stab(iommu, base, size, 0, 0);
+	iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0,
+					    IOMMU_PAGE_SHIFT);
 	cell_iommu_enable_hardware(iommu);
 }
 
@@ -464,6 +473,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 			unsigned long pte_offset)
 {
 	struct iommu_window *window;
+	struct page *page;
 	u32 ioid;
 
 	ioid = cell_iommu_get_ioid(np);
@@ -475,13 +485,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 	window->size = size;
 	window->ioid = ioid;
 	window->iommu = iommu;
-	window->pte_offset = pte_offset;
 
 	window->table.it_blocksize = 16;
 	window->table.it_base = (unsigned long)iommu->ptab;
 	window->table.it_index = iommu->nid;
-	window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) +
-		window->pte_offset;
+	window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset;
 	window->table.it_size = size >> IOMMU_PAGE_SHIFT;
 
 	iommu_init_table(&window->table, iommu->nid);
@@ -504,6 +512,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 	 * This code also assumes that we have a window that starts at 0,
 	 * which is the case on all spider based blades.
 	 */
+	page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
+	BUG_ON(!page);
+	iommu->pad_page = page_address(page);
+	clear_page(iommu->pad_page);
+
 	__set_bit(0, window->table.it_map);
 	tce_build_cell(&window->table, window->table.it_offset, 1,
 		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
@@ -549,7 +562,7 @@ static void cell_dma_dev_setup_iommu(struct device *dev)
 	archdata->dma_data = &window->table;
 }
 
-static void cell_dma_dev_setup_static(struct device *dev);
+static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
 {
@@ -557,7 +570,7 @@ static void cell_dma_dev_setup(struct device *dev)
 
 	/* Order is important here, these are not mutually exclusive */
 	if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
-		cell_dma_dev_setup_static(dev);
+		cell_dma_dev_setup_fixed(dev);
 	else if (get_pci_dma_ops() == &dma_iommu_ops)
 		cell_dma_dev_setup_iommu(dev);
 	else if (get_pci_dma_ops() == &dma_direct_ops)
@@ -858,7 +871,7 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask)
 	return 0;
 }
 
-static void cell_dma_dev_setup_static(struct device *dev)
+static void cell_dma_dev_setup_fixed(struct device *dev)
 {
 	struct dev_archdata *archdata = &dev->archdata;
 	u64 addr;
@@ -869,35 +882,45 @@ static void cell_dma_dev_setup_static(struct device *dev)
 	dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
 }
 
+static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
+			   unsigned long base_pte)
+{
+	unsigned long segment, offset;
+
+	segment = addr >> IO_SEGMENT_SHIFT;
+	offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24));
+	ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long));
+
+	pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
+		  addr, ptab, segment, offset);
+
+	ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask);
+}
+
 static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 	struct device_node *np, unsigned long dbase, unsigned long dsize,
 	unsigned long fbase, unsigned long fsize)
 {
-	unsigned long base_pte, uaddr, *io_pte;
-	int i;
+	unsigned long base_pte, uaddr, ioaddr, *ptab;
 
-	dma_iommu_fixed_base = fbase;
+	ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24);
 
-	/* convert from bytes into page table indices */
-	dbase = dbase >> IOMMU_PAGE_SHIFT;
-	dsize = dsize >> IOMMU_PAGE_SHIFT;
-	fbase = fbase >> IOMMU_PAGE_SHIFT;
-	fsize = fsize >> IOMMU_PAGE_SHIFT;
+	dma_iommu_fixed_base = fbase;
 
 	pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-	io_pte = iommu->ptab;
 	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
 		    | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
 
-	uaddr = 0;
-	for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) {
+	for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
 		/* Don't touch the dynamic region */
-		if (i >= dbase && i < (dbase + dsize)) {
-			pr_debug("iommu: static/dynamic overlap, skipping\n");
+		ioaddr = uaddr + fbase;
+		if (ioaddr >= dbase && ioaddr < (dbase + dsize)) {
+			pr_debug("iommu: fixed/dynamic overlap, skipping\n");
 			continue;
 		}
-		io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
+
+		insert_16M_pte(uaddr, ptab, base_pte);
 	}
 
 	mb();
@@ -995,7 +1018,9 @@ static int __init cell_iommu_fixed_mapping_init(void)
 			"fixed window 0x%lx-0x%lx\n", iommu->nid, dbase,
 			 dbase + dsize, fbase, fbase + fsize);
 
-		cell_iommu_setup_page_tables(iommu, dbase, dsize, fbase, fsize);
+		cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize);
+		iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0,
+						    IOMMU_PAGE_SHIFT);
 		cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize,
 					     fbase, fsize);
 		cell_iommu_enable_hardware(iommu);

arch/powerpc/platforms/cell/setup.c

@@ -149,6 +149,11 @@ static void __init cell_init_irq(void)
 	mpic_init_IRQ();
 }
 
+static void __init cell_set_dabrx(void)
+{
+	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
+}
+
 static void __init cell_setup_arch(void)
 {
 #ifdef CONFIG_SPU_BASE
@@ -158,6 +163,8 @@ static void __init cell_setup_arch(void)
 
 	cbe_regs_init();
 
+	cell_set_dabrx();
+
 #ifdef CONFIG_CBE_RAS
 	cbe_ras_init();
 #endif

arch/powerpc/platforms/cell/spu_base.c

@@ -81,9 +81,12 @@ struct spu_slb {
 void spu_invalidate_slbs(struct spu *spu)
 {
 	struct spu_priv2 __iomem *priv2 = spu->priv2;
+	unsigned long flags;
 
+	spin_lock_irqsave(&spu->register_lock, flags);
 	if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK)
 		out_be64(&priv2->slb_invalidate_all_W, 0UL);
+	spin_unlock_irqrestore(&spu->register_lock, flags);
 }
 EXPORT_SYMBOL_GPL(spu_invalidate_slbs);
 
@@ -148,7 +151,11 @@ static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
 			__func__, slbe, slb->vsid, slb->esid);
 
 	out_be64(&priv2->slb_index_W, slbe);
+	/* set invalid before writing vsid */
+	out_be64(&priv2->slb_esid_RW, 0);
+	/* now it's safe to write the vsid */
 	out_be64(&priv2->slb_vsid_RW, slb->vsid);
+	/* setting the new esid makes the entry valid again */
 	out_be64(&priv2->slb_esid_RW, slb->esid);
 }
 
@@ -290,9 +297,11 @@ void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
 		nr_slbs++;
 	}
 
+	spin_lock_irq(&spu->register_lock);
 	/* Add the set of SLBs */
 	for (i = 0; i < nr_slbs; i++)
 		spu_load_slb(spu, i, &slbs[i]);
+	spin_unlock_irq(&spu->register_lock);
 }
 EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs);
 
@@ -337,13 +346,14 @@ spu_irq_class_1(int irq, void *data)
 	if (stat & CLASS1_STORAGE_FAULT_INTR)
 		spu_mfc_dsisr_set(spu, 0ul);
 	spu_int_stat_clear(spu, 1, stat);
-	spin_unlock(&spu->register_lock);
-	pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
-			dar, dsisr);
 
 	if (stat & CLASS1_SEGMENT_FAULT_INTR)
 		__spu_trap_data_seg(spu, dar);
 
+	spin_unlock(&spu->register_lock);
+	pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
+			dar, dsisr);
+
 	if (stat & CLASS1_STORAGE_FAULT_INTR)
 		__spu_trap_data_map(spu, dar, dsisr);
 

arch/powerpc/platforms/cell/spufs/context.c

@@ -109,13 +109,12 @@ void spu_forget(struct spu_context *ctx)
 
 	/*
 	 * This is basically an open-coded spu_acquire_saved, except that
-	 * we don't acquire the state mutex interruptible.
+	 * we don't acquire the state mutex interruptible, and we don't
+	 * want this context to be rescheduled on release.
 	 */
 	mutex_lock(&ctx->state_mutex);
-	if (ctx->state != SPU_STATE_SAVED) {
-		set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags);
+	if (ctx->state != SPU_STATE_SAVED)
 		spu_deactivate(ctx);
-	}
 
 	mm = ctx->owner;
 	ctx->owner = NULL;

arch/powerpc/platforms/cell/spufs/file.c

@@ -366,6 +366,13 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 	if (offset >= ps_size)
 		return NOPFN_SIGBUS;
 
+	/*
+	 * Because we release the mmap_sem, the context may be destroyed while
+	 * we're in spu_wait. Grab an extra reference so it isn't destroyed
+	 * in the meantime.
+	 */
+	get_spu_context(ctx);
+
 	/*
 	 * We have to wait for context to be loaded before we have
 	 * pages to hand out to the user, but we don't want to wait
@@ -375,7 +382,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 	 * hanged.
 	 */
 	if (spu_acquire(ctx))
-		return NOPFN_REFAULT;
+		goto refault;
 
 	if (ctx->state == SPU_STATE_SAVED) {
 		up_read(&current->mm->mmap_sem);
@@ -391,6 +398,9 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
 	if (!ret)
 		spu_release(ctx);
+
+refault:
+	put_spu_context(ctx);
 	return NOPFN_REFAULT;
 }
 

arch/powerpc/platforms/cell/spufs/sched.c

@@ -246,7 +246,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
 	spu_switch_notify(spu, ctx);
 	ctx->state = SPU_STATE_RUNNABLE;
 
-	spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
+	spuctx_switch_state(ctx, SPU_UTIL_USER);
 }
 
 /*

arch/powerpc/platforms/cell/spufs/sputrace.c

@@ -58,12 +58,12 @@ static int sputrace_sprint(char *tbuf, int n)
 		ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start));
 
 	return snprintf(tbuf, n,
-		"[%lu.%09lu] %d: %s (thread = %d, spu = %d)\n",
+		"[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n",
 		(unsigned long) tv.tv_sec,
 		(unsigned long) tv.tv_nsec,
-		t->owner_tid,
-		t->name,
 		t->curr_tid,
+		t->name,
+		t->owner_tid,
 		t->number);
 }
 
@@ -188,6 +188,7 @@ struct spu_probe spu_probes[] = {
 	{ "spufs_ps_nopfn__insert", "%p %p", spu_context_event },
 	{ "spu_acquire_saved__enter", "%p", spu_context_nospu_event },
 	{ "destroy_spu_context__enter", "%p", spu_context_nospu_event },
+	{ "spufs_stop_callback__enter", "%p %p", spu_context_event },
 };
 
 static int __init sputrace_init(void)

arch/powerpc/platforms/cell/spufs/switch.c

@@ -34,6 +34,7 @@
 
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/hardirq.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -117,6 +118,8 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 	 *     Write INT_MASK_class1 with value of 0.
 	 *     Save INT_Mask_class2 in CSA.
 	 *     Write INT_MASK_class2 with value of 0.
+	 *     Synchronize all three interrupts to be sure
+	 *     we no longer execute a handler on another CPU.
 	 */
 	spin_lock_irq(&spu->register_lock);
 	if (csa) {
@@ -129,6 +132,9 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 	spu_int_mask_set(spu, 2, 0ul);
 	eieio();
 	spin_unlock_irq(&spu->register_lock);
+	synchronize_irq(spu->irqs[0]);
+	synchronize_irq(spu->irqs[1]);
+	synchronize_irq(spu->irqs[2]);
 }
 
 static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu)

arch/powerpc/platforms/celleb/beat.h

@@ -21,9 +21,6 @@
 #ifndef _CELLEB_BEAT_H
 #define _CELLEB_BEAT_H
 
-#define DABRX_KERNEL		(1UL<<1)
-#define DABRX_USER		(1UL<<0)
-
 int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*);
 int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t);
 int64_t beat_repository_encode(int, const char *, uint64_t[4]);

drivers/char/xilinx_hwicap/buffer_icap.c

@@ -73,8 +73,8 @@
 #define XHI_BUFFER_START 0
 
 /**
- * buffer_icap_get_status: Get the contents of the status register.
- * @parameter base_address: is the base address of the device
+ * buffer_icap_get_status - Get the contents of the status register.
+ * @base_address: is the base address of the device
  *
  * The status register contains the ICAP status and the done bit.
  *
@@ -94,9 +94,9 @@ static inline u32 buffer_icap_get_status(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_get_bram: Reads data from the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset from which the data should be read.
+ * buffer_icap_get_bram - Reads data from the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset from which the data should be read.
  *
  * A bram is used as a configuration memory cache.  One frame of data can
  * be stored in this "storage buffer".
@@ -108,8 +108,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_busy: Return true if the icap device is busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is busy
+ * @base_address: is the base address of the device
  *
  * The queries the low order bit of the status register, which
  * indicates whether the current configuration or readback operation
@@ -121,8 +121,8 @@ static inline bool buffer_icap_busy(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_busy: Return true if the icap device is not busy
- * @parameter base_address: is the base address of the device
+ * buffer_icap_busy - Return true if the icap device is not busy
+ * @base_address: is the base address of the device
  *
  * The queries the low order bit of the status register, which
  * indicates whether the current configuration or readback operation
@@ -134,9 +134,9 @@ static inline bool buffer_icap_done(void __iomem *base_address)
 }
 
 /**
- * buffer_icap_set_size: Set the size register.
- * @parameter base_address: is the base address of the device
- * @parameter data: The size in bytes.
+ * buffer_icap_set_size - Set the size register.
+ * @base_address: is the base address of the device
+ * @data: The size in bytes.
  *
  * The size register holds the number of 8 bit bytes to transfer between
  * bram and the icap (or icap to bram).
@@ -148,9 +148,9 @@ static inline void buffer_icap_set_size(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_mSetoffsetReg: Set the bram offset register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_offset - Set the bram offset register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
  *
  * The bram offset register holds the starting bram address to transfer
  * data from during configuration or write data to during readback.
@@ -162,9 +162,9 @@ static inline void buffer_icap_set_offset(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register.
- * @parameter base_address: contains the base address of the device.
- * @parameter data: is the value to be written to the data register.
+ * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register.
+ * @base_address: contains the base address of the device.
+ * @data: is the value to be written to the data register.
  *
  * The RNC register determines the direction of the data transfer.  It
  * controls whether a configuration or readback take place.  Writing to
@@ -178,10 +178,10 @@ static inline void buffer_icap_set_rnc(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_set_bram: Write data to the storage buffer bram.
- * @parameter base_address: contains the base address of the component.
- * @parameter offset: The word offset at which the data should be written.
- * @parameter data: The value to be written to the bram offset.
+ * buffer_icap_set_bram - Write data to the storage buffer bram.
+ * @base_address: contains the base address of the component.
+ * @offset: The word offset at which the data should be written.
+ * @data: The value to be written to the bram offset.
  *
  * A bram is used as a configuration memory cache.  One frame of data can
  * be stored in this "storage buffer".
@@ -193,10 +193,10 @@ static inline void buffer_icap_set_bram(void __iomem *base_address,
 }
 
 /**
- * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
  *           device (ICAP).
  **/
 static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
@@ -227,10 +227,10 @@ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
 };
 
 /**
- * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter offset: The storage buffer start address.
- * @parameter count: The number of words (32 bit) to read from the
+ * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer.
+ * @drvdata: a pointer to the drvdata.
+ * @offset: The storage buffer start address.
+ * @count: The number of words (32 bit) to read from the
  *           device (ICAP).
  **/
 static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
@@ -261,8 +261,8 @@ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
 };
 
 /**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
  *
  * Writing to the status register resets the ICAP logic in an internal
  * version of the core.  For the version of the core published in EDK,
@@ -274,10 +274,10 @@ void buffer_icap_reset(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * buffer_icap_set_configuration: Load a partial bitstream from system memory.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Kernel address of the partial bitstream.
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_set_configuration - Load a partial bitstream from system memory.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Kernel address of the partial bitstream.
+ * @size: the size of the partial bitstream in 32 bit words.
  **/
 int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 			     u32 size)
@@ -333,10 +333,10 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 };
 
 /**
- * buffer_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * buffer_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
  **/
 int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
 			     u32 size)

drivers/char/xilinx_hwicap/fifo_icap.c

@@ -94,9 +94,9 @@
 
 
 /**
- * fifo_icap_fifo_write: Write data to the write FIFO.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the 32-bit value to be written to the FIFO.
+ * fifo_icap_fifo_write - Write data to the write FIFO.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the 32-bit value to be written to the FIFO.
  *
  * This function will silently fail if the fifo is full.
  **/
@@ -108,8 +108,8 @@ static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_fifo_read: Read data from the Read FIFO.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_fifo_read - Read data from the Read FIFO.
+ * @drvdata: a pointer to the drvdata.
  *
  * This function will silently fail if the fifo is empty.
  **/
@@ -121,9 +121,9 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_set_read_size: Set the the size register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: the size of the following read transaction, in words.
+ * fifo_icap_set_read_size - Set the the size register.
+ * @drvdata: a pointer to the drvdata.
+ * @data: the size of the following read transaction, in words.
  **/
 static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
 		u32 data)
@@ -132,8 +132,8 @@ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_start_config: Initiate a configuration (write) to the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_config - Initiate a configuration (write) to the device.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
 {
@@ -142,8 +142,8 @@ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_start_readback: Initiate a readback from the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_start_readback - Initiate a readback from the device.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
 {
@@ -152,8 +152,8 @@ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_busy: Return true if the ICAP is still processing a transaction.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_busy - Return true if the ICAP is still processing a transaction.
+ * @drvdata: a pointer to the drvdata.
  **/
 static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 {
@@ -163,8 +163,8 @@ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_write_fifo_vacancy: Query the write fifo available space.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_write_fifo_vacancy - Query the write fifo available space.
+ * @drvdata: a pointer to the drvdata.
  *
  * Return the number of words that can be safely pushed into the write fifo.
  **/
@@ -175,8 +175,8 @@ static inline u32 fifo_icap_write_fifo_vacancy(
 }
 
 /**
- * fifo_icap_read_fifo_occupancy: Query the read fifo available data.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_read_fifo_occupancy - Query the read fifo available data.
+ * @drvdata: a pointer to the drvdata.
  *
  * Return the number of words that can be safely read from the read fifo.
  **/
@@ -187,11 +187,11 @@ static inline u32 fifo_icap_read_fifo_occupancy(
 }
 
 /**
- * fifo_icap_set_configuration: Send configuration data to the ICAP.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter frame_buffer: a pointer to the data to be written to the
+ * fifo_icap_set_configuration - Send configuration data to the ICAP.
+ * @drvdata: a pointer to the drvdata.
+ * @frame_buffer: a pointer to the data to be written to the
  *		ICAP device.
- * @parameter num_words: the number of words (32 bit) to write to the ICAP
+ * @num_words: the number of words (32 bit) to write to the ICAP
  *		device.
 
  * This function writes the given user data to the Write FIFO in
@@ -266,10 +266,10 @@ int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * fifo_icap_get_configuration: Read configuration data from the device.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter data: Address of the data representing the partial bitstream
- * @parameter size: the size of the partial bitstream in 32 bit words.
+ * fifo_icap_get_configuration - Read configuration data from the device.
+ * @drvdata: a pointer to the drvdata.
+ * @data: Address of the data representing the partial bitstream
+ * @size: the size of the partial bitstream in 32 bit words.
  *
  * This function reads the specified number of words from the ICAP device in
  * the polled mode.
@@ -335,8 +335,8 @@ int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata,
 }
 
 /**
- * buffer_icap_reset: Reset the logic of the icap device.
- * @parameter drvdata: a pointer to the drvdata.
+ * buffer_icap_reset - Reset the logic of the icap device.
+ * @drvdata: a pointer to the drvdata.
  *
  * This function forces the software reset of the complete HWICAP device.
  * All the registers will return to the default value and the FIFO is also
@@ -360,8 +360,8 @@ void fifo_icap_reset(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * fifo_icap_flush_fifo: This function flushes the FIFOs in the device.
- * @parameter drvdata: a pointer to the drvdata.
+ * fifo_icap_flush_fifo - This function flushes the FIFOs in the device.
+ * @drvdata: a pointer to the drvdata.
  */
 void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata)
 {

drivers/char/xilinx_hwicap/xilinx_hwicap.c

@@ -84,7 +84,7 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/proc_fs.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 #include <linux/sysctl.h>
 #include <linux/version.h>
 #include <linux/fs.h>
@@ -119,6 +119,7 @@ module_param(xhwicap_minor, int, S_IRUGO);
 
 /* An array, which is set to true when the device is registered. */
 static bool probed_devices[HWICAP_DEVICES];
+static struct mutex icap_sem;
 
 static struct class *icap_class;
 
@@ -199,14 +200,14 @@ static const struct config_registers v5_config_registers = {
 };
 
 /**
- * hwicap_command_desync: Send a DESYNC command to the ICAP port.
- * @parameter drvdata: a pointer to the drvdata.
+ * hwicap_command_desync - Send a DESYNC command to the ICAP port.
+ * @drvdata: a pointer to the drvdata.
  *
  * This command desynchronizes the ICAP After this command, a
  * bitstream containing a NULL packet, followed by a SYNCH packet is
  * required before the ICAP will recognize commands.
  */
-int hwicap_command_desync(struct hwicap_drvdata *drvdata)
+static int hwicap_command_desync(struct hwicap_drvdata *drvdata)
 {
 	u32 buffer[4];
 	u32 index = 0;
@@ -228,51 +229,18 @@ int hwicap_command_desync(struct hwicap_drvdata *drvdata)
 }
 
 /**
- * hwicap_command_capture: Send a CAPTURE command to the ICAP port.
- * @parameter drvdata: a pointer to the drvdata.
- *
- * This command captures all of the flip flop states so they will be
- * available during readback.  One can use this command instead of
- * enabling the CAPTURE block in the design.
- */
-int hwicap_command_capture(struct hwicap_drvdata *drvdata)
-{
-	u32 buffer[7];
-	u32 index = 0;
-
-	/*
-	 * Create the data to be written to the ICAP.
-	 */
-	buffer[index++] = XHI_DUMMY_PACKET;
-	buffer[index++] = XHI_SYNC_PACKET;
-	buffer[index++] = XHI_NOOP_PACKET;
-	buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1;
-	buffer[index++] = XHI_CMD_GCAPTURE;
-	buffer[index++] = XHI_DUMMY_PACKET;
-	buffer[index++] = XHI_DUMMY_PACKET;
-
-	/*
-	 * Write the data to the FIFO and intiate the transfer of data
-	 * present in the FIFO to the ICAP device.
-	 */
-	return drvdata->config->set_configuration(drvdata,
-			&buffer[0], index);
-
-}
-
-/**
- * hwicap_get_configuration_register: Query a configuration register.
- * @parameter drvdata: a pointer to the drvdata.
- * @parameter reg: a constant which represents the configuration
+ * hwicap_get_configuration_register - Query a configuration register.
+ * @drvdata: a pointer to the drvdata.
+ * @reg: a constant which represents the configuration
  *		register value to be returned.
  * 		Examples:  XHI_IDCODE, XHI_FLR.
- * @parameter RegData: returns the value of the register.
+ * @reg_data: returns the value of the register.
  *
  * Sends a query packet to the ICAP and then receives the response.
  * The icap is left in Synched state.
  */
-int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
-		u32 reg, u32 *RegData)
+static int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
+		u32 reg, u32 *reg_data)
 {
 	int status;
 	u32 buffer[6];
@@ -300,14 +268,14 @@ int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
 	/*
 	 * Read the configuration register
 	 */
-	status = drvdata->config->get_configuration(drvdata, RegData, 1);
+	status = drvdata->config->get_configuration(drvdata, reg_data, 1);
 	if (status)
 		return status;
 
 	return 0;
 }
 
-int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
+static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
 {
 	int status;
 	u32 idcode;
@@ -344,7 +312,7 @@ int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
 }
 
 static ssize_t
-hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+hwicap_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 {
 	struct hwicap_drvdata *drvdata = file->private_data;
 	ssize_t bytes_to_read = 0;
@@ -353,8 +321,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
 	u32 bytes_remaining;
 	int status;
 
-	if (down_interruptible(&drvdata->sem))
-		return -ERESTARTSYS;
+	status = mutex_lock_interruptible(&drvdata->sem);
+	if (status)
+		return status;
 
 	if (drvdata->read_buffer_in_use) {
 		/* If there are leftover bytes in the buffer, just */
@@ -370,8 +339,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
 			goto error;
 		}
 		drvdata->read_buffer_in_use -= bytes_to_read;
-		memcpy(drvdata->read_buffer + bytes_to_read,
-				drvdata->read_buffer, 4 - bytes_to_read);
+		memmove(drvdata->read_buffer,
+		       drvdata->read_buffer + bytes_to_read,
+		       4 - bytes_to_read);
 	} else {
 		/* Get new data from the ICAP, and return was was requested. */
 		kbuf = (u32 *) get_zeroed_page(GFP_KERNEL);
@@ -414,18 +384,20 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
 			status = -EFAULT;
 			goto error;
 		}
-		memcpy(kbuf, drvdata->read_buffer, bytes_remaining);
+		memcpy(drvdata->read_buffer,
+		       kbuf,
+		       bytes_remaining);
 		drvdata->read_buffer_in_use = bytes_remaining;
 		free_page((unsigned long)kbuf);
 	}
 	status = bytes_to_read;
  error:
-	up(&drvdata->sem);
+	mutex_unlock(&drvdata->sem);
 	return status;
 }
 
 static ssize_t
-hwicap_write(struct file *file, const char *buf,
+hwicap_write(struct file *file, const char __user *buf,
 		size_t count, loff_t *ppos)
 {
 	struct hwicap_drvdata *drvdata = file->private_data;
@@ -435,8 +407,9 @@ hwicap_write(struct file *file, const char *buf,
 	ssize_t len;
 	ssize_t status;
 
-	if (down_interruptible(&drvdata->sem))
-		return -ERESTARTSYS;
+	status = mutex_lock_interruptible(&drvdata->sem);
+	if (status)
+		return status;
 
 	left += drvdata->write_buffer_in_use;
 
@@ -465,7 +438,7 @@ hwicap_write(struct file *file, const char *buf,
 			memcpy(kbuf, drvdata->write_buffer,
 					drvdata->write_buffer_in_use);
 			if (copy_from_user(
-			    (((char *)kbuf) + (drvdata->write_buffer_in_use)),
+			    (((char *)kbuf) + drvdata->write_buffer_in_use),
 			    buf + written,
 			    len - (drvdata->write_buffer_in_use))) {
 				free_page((unsigned long)kbuf);
@@ -508,7 +481,7 @@ hwicap_write(struct file *file, const char *buf,
 	free_page((unsigned long)kbuf);
 	status = written;
  error:
-	up(&drvdata->sem);
+	mutex_unlock(&drvdata->sem);
 	return status;
 }
 
@@ -519,8 +492,9 @@ static int hwicap_open(struct inode *inode, struct file *file)
 
 	drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev);
 
-	if (down_interruptible(&drvdata->sem))
-		return -ERESTARTSYS;
+	status = mutex_lock_interruptible(&drvdata->sem);
+	if (status)
+		return status;
 
 	if (drvdata->is_open) {
 		status = -EBUSY;
@@ -539,7 +513,7 @@ static int hwicap_open(struct inode *inode, struct file *file)
 	drvdata->is_open = 1;
 
  error:
-	up(&drvdata->sem);
+	mutex_unlock(&drvdata->sem);
 	return status;
 }
 
@@ -549,8 +523,7 @@ static int hwicap_release(struct inode *inode, struct file *file)
 	int i;
 	int status = 0;
 
-	if (down_interruptible(&drvdata->sem))
-		return -ERESTARTSYS;
+	mutex_lock(&drvdata->sem);
 
 	if (drvdata->write_buffer_in_use) {
 		/* Flush write buffer. */
@@ -569,7 +542,7 @@ static int hwicap_release(struct inode *inode, struct file *file)
 
  error:
 	drvdata->is_open = 0;
-	up(&drvdata->sem);
+	mutex_unlock(&drvdata->sem);
 	return status;
 }
 
@@ -592,31 +565,36 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 
 	dev_info(dev, "Xilinx icap port driver\n");
 
+	mutex_lock(&icap_sem);
+
 	if (id < 0) {
 		for (id = 0; id < HWICAP_DEVICES; id++)
 			if (!probed_devices[id])
 				break;
 	}
 	if (id < 0 || id >= HWICAP_DEVICES) {
+		mutex_unlock(&icap_sem);
 		dev_err(dev, "%s%i too large\n", DRIVER_NAME, id);
 		return -EINVAL;
 	}
 	if (probed_devices[id]) {
+		mutex_unlock(&icap_sem);
 		dev_err(dev, "cannot assign to %s%i; it is already in use\n",
 			DRIVER_NAME, id);
 		return -EBUSY;
 	}
 
 	probed_devices[id] = 1;
+	mutex_unlock(&icap_sem);
 
 	devt = MKDEV(xhwicap_major, xhwicap_minor + id);
 
-	drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
+	drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
 	if (!drvdata) {
 		dev_err(dev, "Couldn't allocate device private record\n");
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto failed0;
 	}
-	memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata));
 	dev_set_drvdata(dev, (void *)drvdata);
 
 	if (!regs_res) {
@@ -648,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 	drvdata->config = config;
 	drvdata->config_regs = config_regs;
 
-	init_MUTEX(&drvdata->sem);
+	mutex_init(&drvdata->sem);
 	drvdata->is_open = 0;
 
 	dev_info(dev, "ioremap %lx to %p with size %x\n",
@@ -663,7 +641,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 		goto failed3;
 	}
 	/*  devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */
-	class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME);
+	device_create(icap_class, dev, devt, "%s%d", DRIVER_NAME, id);
 	return 0;		/* success */
 
  failed3:
@@ -675,6 +653,11 @@ static int __devinit hwicap_setup(struct device *dev, int id,
  failed1:
 	kfree(drvdata);
 
+ failed0:
+	mutex_lock(&icap_sem);
+	probed_devices[id] = 0;
+	mutex_unlock(&icap_sem);
+
 	return retval;
 }
 
@@ -699,14 +682,16 @@ static int __devexit hwicap_remove(struct device *dev)
 	if (!drvdata)
 		return 0;
 
-	class_device_destroy(icap_class, drvdata->devt);
+	device_destroy(icap_class, drvdata->devt);
 	cdev_del(&drvdata->cdev);
 	iounmap(drvdata->base_address);
 	release_mem_region(drvdata->mem_start, drvdata->mem_size);
 	kfree(drvdata);
 	dev_set_drvdata(dev, NULL);
-	probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
 
+	mutex_lock(&icap_sem);
+	probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+	mutex_unlock(&icap_sem);
 	return 0;		/* success */
 }
 
@@ -821,28 +806,29 @@ static struct of_platform_driver hwicap_of_driver = {
 };
 
 /* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __devinit hwicap_of_register(void)
+static inline int __init hwicap_of_register(void)
 {
 	pr_debug("hwicap: calling of_register_platform_driver()\n");
 	return of_register_platform_driver(&hwicap_of_driver);
 }
 
-static inline void __devexit hwicap_of_unregister(void)
+static inline void __exit hwicap_of_unregister(void)
 {
 	of_unregister_platform_driver(&hwicap_of_driver);
 }
 #else /* CONFIG_OF */
 /* CONFIG_OF not enabled; do nothing helpers */
-static inline int __devinit hwicap_of_register(void) { return 0; }
-static inline void __devexit hwicap_of_unregister(void) { }
+static inline int __init hwicap_of_register(void) { return 0; }
+static inline void __exit hwicap_of_unregister(void) { }
 #endif /* CONFIG_OF */
 
-static int __devinit hwicap_module_init(void)
+static int __init hwicap_module_init(void)
 {
 	dev_t devt;
 	int retval;
 
 	icap_class = class_create(THIS_MODULE, "xilinx_config");
+	mutex_init(&icap_sem);
 
 	if (xhwicap_major) {
 		devt = MKDEV(xhwicap_major, xhwicap_minor);
@@ -883,7 +869,7 @@ static int __devinit hwicap_module_init(void)
 	return retval;
 }
 
-static void __devexit hwicap_module_cleanup(void)
+static void __exit hwicap_module_cleanup(void)
 {
 	dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
 

drivers/char/xilinx_hwicap/xilinx_hwicap.h

@@ -48,9 +48,9 @@ struct hwicap_drvdata {
 	u8 write_buffer[4];
 	u32 read_buffer_in_use;	  /* Always in [0,3] */
 	u8 read_buffer[4];
-	u32 mem_start;		  /* phys. address of the control registers */
-	u32 mem_end;		  /* phys. address of the control registers */
-	u32 mem_size;
+	resource_size_t mem_start;/* phys. address of the control registers */
+	resource_size_t mem_end;  /* phys. address of the control registers */
+	resource_size_t mem_size;
 	void __iomem *base_address;/* virt. address of the control registers */
 
 	struct device *dev;
@@ -61,7 +61,7 @@ struct hwicap_drvdata {
 	const struct config_registers *config_regs;
 	void *private_data;
 	bool is_open;
-	struct semaphore sem;
+	struct mutex sem;
 };
 
 struct hwicap_driver_config {
@@ -164,29 +164,29 @@ struct config_registers {
 #define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
 
 /**
- * hwicap_type_1_read: Generates a Type 1 read packet header.
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_read - Generates a Type 1 read packet header.
+ * @reg: is the address of the register to be read back.
  *
  * Generates a Type 1 read packet header, which is used to indirectly
  * read registers in the configuration logic.  This packet must then
  * be sent through the icap device, and a return packet received with
  * the information.
  **/
-static inline u32 hwicap_type_1_read(u32 Register)
+static inline u32 hwicap_type_1_read(u32 reg)
 {
 	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-		(Register << XHI_REGISTER_SHIFT) |
+		(reg << XHI_REGISTER_SHIFT) |
 		(XHI_OP_READ << XHI_OP_SHIFT);
 }
 
 /**
- * hwicap_type_1_write: Generates a Type 1 write packet header
- * @parameter: Register is the address of the register to be read back.
+ * hwicap_type_1_write - Generates a Type 1 write packet header
+ * @reg: is the address of the register to be read back.
  **/
-static inline u32 hwicap_type_1_write(u32 Register)
+static inline u32 hwicap_type_1_write(u32 reg)
 {
 	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
-		(Register << XHI_REGISTER_SHIFT) |
+		(reg << XHI_REGISTER_SHIFT) |
 		(XHI_OP_WRITE << XHI_OP_SHIFT);
 }
 

include/asm-powerpc/reg.h

@@ -153,6 +153,9 @@
 #define   CTRL_RUNLATCH	0x1
 #define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
 #define   DABR_TRANSLATION	(1UL << 2)
+#define SPRN_DABRX	0x3F7	/* Data Address Breakpoint Register Extension */
+#define   DABRX_USER	(1UL << 0)
+#define   DABRX_KERNEL	(1UL << 1)
 #define SPRN_DAR	0x013	/* Data Address Register */
 #define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
 #define   DSISR_NOHPTE		0x40000000	/* no translation found */