regulator: act8945a-regulator: fix ldo register addresses in set_mode hook

According to ACT8945A datasheet[1], operating modes for ldos are
controlled by BIT(5) of their respective _CTRL registers.

[1] https://active-semi.com/wp-content/uploads/ACT8945A_Datasheet.pdf

Fixes: 7482d6ec ("regulator: act8945a-regulator: Implement PM functionalities")
Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Link: https://lore.kernel.org/r/1565635194-5816-1-git-send-email-raagjadav@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/act8945a-regulator.c

@@ -169,16 +169,16 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		reg = ACT8945A_DCDC3_CTRL;
 		break;
 	case ACT8945A_ID_LDO1:
-		reg = ACT8945A_LDO1_SUS;
+		reg = ACT8945A_LDO1_CTRL;
 		break;
 	case ACT8945A_ID_LDO2:
-		reg = ACT8945A_LDO2_SUS;
+		reg = ACT8945A_LDO2_CTRL;
 		break;
 	case ACT8945A_ID_LDO3:
-		reg = ACT8945A_LDO3_SUS;
+		reg = ACT8945A_LDO3_CTRL;
 		break;
 	case ACT8945A_ID_LDO4:
-		reg = ACT8945A_LDO4_SUS;
+		reg = ACT8945A_LDO4_CTRL;
 		break;
 	default:
 		return -EINVAL;