Commit 5ef2f688 authored by Mike Rapoport's avatar Mike Rapoport Committed by Greg Kroah-Hartman

staging: sm750fb: rename 'struct sm750_dev' variables to sm750_dev

Use consistent naming for 'struct sm750_dev' variables
Signed-off-by: default avatarMike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent bc3d48f3
......@@ -650,21 +650,21 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
{
int ret;
struct lynx_share *share;
struct sm750_dev *spec_share;
struct sm750_dev *sm750_dev;
struct lynxfb_output *output;
struct lynxfb_crtc *crtc;
ret = 0;
share = par->share;
spec_share = container_of(share, struct sm750_dev, share);
sm750_dev = container_of(share, struct sm750_dev, share);
output = &par->output;
crtc = &par->crtc;
crtc->vidmem_size = (share->dual) ? share->vidmem_size >> 1 :
share->vidmem_size;
/* setup crtc and output member */
spec_share->hwCursor = g_hwcursor;
sm750_dev->hwCursor = g_hwcursor;
crtc->line_pad = 16;
crtc->xpanstep = 8;
......@@ -676,7 +676,7 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
/* chip specific phase */
share->accel.de_wait = (share->revid == SM750LE_REVISION_ID) ?
hw_sm750le_deWait : hw_sm750_deWait;
switch (spec_share->state.dataflow) {
switch (sm750_dev->state.dataflow) {
case sm750_simul_pri:
output->paths = sm750_pnc;
crtc->channel = sm750_primary;
......@@ -937,25 +937,25 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
/* chip specific g_option configuration routine */
static void sm750fb_setup(struct lynx_share *share, char *src)
{
struct sm750_dev *spec_share;
struct sm750_dev *sm750_dev;
char *opt;
#ifdef CAP_EXPENSION
char *exp_res;
#endif
int swap;
spec_share = container_of(share, struct sm750_dev, share);
sm750_dev = container_of(share, struct sm750_dev, share);
#ifdef CAP_EXPENSIION
exp_res = NULL;
#endif
swap = 0;
spec_share->state.initParm.chip_clk = 0;
spec_share->state.initParm.mem_clk = 0;
spec_share->state.initParm.master_clk = 0;
spec_share->state.initParm.powerMode = 0;
spec_share->state.initParm.setAllEngOff = 0;
spec_share->state.initParm.resetMemory = 1;
sm750_dev->state.initParm.chip_clk = 0;
sm750_dev->state.initParm.mem_clk = 0;
sm750_dev->state.initParm.master_clk = 0;
sm750_dev->state.initParm.powerMode = 0;
sm750_dev->state.initParm.setAllEngOff = 0;
sm750_dev->state.initParm.resetMemory = 1;
/* defaultly turn g_hwcursor on for both view */
g_hwcursor = 3;
......@@ -972,13 +972,13 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
if (!strncmp(opt, "swap", strlen("swap")))
swap = 1;
else if (!strncmp(opt, "nocrt", strlen("nocrt")))
spec_share->state.nocrt = 1;
sm750_dev->state.nocrt = 1;
else if (!strncmp(opt, "36bit", strlen("36bit")))
spec_share->state.pnltype = sm750_doubleTFT;
sm750_dev->state.pnltype = sm750_doubleTFT;
else if (!strncmp(opt, "18bit", strlen("18bit")))
spec_share->state.pnltype = sm750_dualTFT;
sm750_dev->state.pnltype = sm750_dualTFT;
else if (!strncmp(opt, "24bit", strlen("24bit")))
spec_share->state.pnltype = sm750_24TFT;
sm750_dev->state.pnltype = sm750_24TFT;
#ifdef CAP_EXPANSION
else if (!strncmp(opt, "exp:", strlen("exp:")))
exp_res = opt + strlen("exp:");
......@@ -1003,10 +1003,10 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
}
#ifdef CAP_EXPANSION
if (getExpRes(exp_res,
&spec_share->state.xLCD,
&spec_share->state.yLCD)) {
&sm750_dev->state.xLCD,
&sm750_dev->state.yLCD)) {
/* seems exp_res is not valid */
spec_share->state.xLCD = spec_share->state.yLCD = 0;
sm750_dev->state.xLCD = sm750_dev->state.yLCD = 0;
}
#endif
......@@ -1014,20 +1014,20 @@ static void sm750fb_setup(struct lynx_share *share, char *src)
if (share->revid != SM750LE_REVISION_ID) {
if (share->dual) {
if (swap)
spec_share->state.dataflow = sm750_dual_swap;
sm750_dev->state.dataflow = sm750_dual_swap;
else
spec_share->state.dataflow = sm750_dual_normal;
sm750_dev->state.dataflow = sm750_dual_normal;
} else {
if (swap)
spec_share->state.dataflow = sm750_simul_sec;
sm750_dev->state.dataflow = sm750_simul_sec;
else
spec_share->state.dataflow = sm750_simul_pri;
sm750_dev->state.dataflow = sm750_simul_pri;
}
} else {
/* SM750LE only have one crt channel */
spec_share->state.dataflow = sm750_simul_sec;
sm750_dev->state.dataflow = sm750_simul_sec;
/* sm750le do not have complex attributes */
spec_share->state.nocrt = 0;
sm750_dev->state.nocrt = 0;
}
}
......@@ -1037,7 +1037,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
struct fb_info *info[] = {NULL, NULL};
struct lynx_share *share = NULL;
struct sm750_dev *spec_share = NULL;
struct sm750_dev *sm750_dev = NULL;
size_t spec_offset = 0;
int fbidx;
......@@ -1053,14 +1053,14 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
*/
spec_offset = offsetof(struct sm750_dev, share);
spec_share = kzalloc(sizeof(*spec_share), GFP_KERNEL);
if (!spec_share) {
sm750_dev = kzalloc(sizeof(*sm750_dev), GFP_KERNEL);
if (!sm750_dev) {
pr_err("Could not allocate memory for share.\n");
goto err_share;
}
/* setting share structure */
share = (struct lynx_share *)(&(spec_share->share));
share = (struct lynx_share *)(&(sm750_dev->share));
share->fbinfo[0] = share->fbinfo[1] = NULL;
share->devid = pdev->device;
share->revid = pdev->revision;
......@@ -1171,7 +1171,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
framebuffer_release(info[0]);
err_info0_alloc:
err_map:
kfree(spec_share);
kfree(sm750_dev);
err_share:
err_enable:
return -ENODEV;
......@@ -1181,7 +1181,7 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
{
struct fb_info *info;
struct lynx_share *share;
void *spec_share;
void *sm750_dev;
struct lynxfb_par *par;
int cnt;
......@@ -1202,9 +1202,9 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
iounmap(share->pvReg);
iounmap(share->pvMem);
spec_share = container_of(share, struct sm750_dev, share);
sm750_dev = container_of(share, struct sm750_dev, share);
kfree(g_settings);
kfree(spec_share);
kfree(sm750_dev);
pci_set_drvdata(pdev, NULL);
}
......
......@@ -27,10 +27,10 @@
int hw_sm750_map(struct lynx_share *share, struct pci_dev *pdev)
{
int ret;
struct sm750_dev *spec_share;
struct sm750_dev *sm750_dev;
spec_share = container_of(share, struct sm750_dev, share);
sm750_dev = container_of(share, struct sm750_dev, share);
ret = 0;
share->vidreg_start = pci_resource_start(pdev, 1);
......@@ -93,11 +93,11 @@ int hw_sm750_map(struct lynx_share *share, struct pci_dev *pdev)
int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
{
struct sm750_dev *spec_share;
struct sm750_dev *sm750_dev;
struct init_status *parm;
spec_share = container_of(share, struct sm750_dev, share);
parm = &spec_share->state.initParm;
sm750_dev = container_of(share, struct sm750_dev, share);
parm = &sm750_dev->state.initParm;
if (parm->chip_clk == 0)
parm->chip_clk = (getChipType() == SM750LE) ?
DEFAULT_SM750LE_CHIP_CLOCK :
......@@ -108,7 +108,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
if (parm->master_clk == 0)
parm->master_clk = parm->chip_clk/3;
ddk750_initHw((initchip_param_t *)&spec_share->state.initParm);
ddk750_initHw((initchip_param_t *)&sm750_dev->state.initParm);
/* for sm718,open pci burst */
if (share->devid == 0x718) {
POKE32(SYSTEM_CTRL,
......@@ -117,7 +117,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
if (getChipType() != SM750LE) {
/* does user need CRT ?*/
if (spec_share->state.nocrt) {
if (sm750_dev->state.nocrt) {
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
......@@ -139,7 +139,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
DPMS, VPHP));
}
switch (spec_share->state.pnltype) {
switch (sm750_dev->state.pnltype) {
case sm750_doubleTFT:
case sm750_24TFT:
case sm750_dualTFT:
......@@ -147,7 +147,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL),
PANEL_DISPLAY_CTRL,
TFT_DISP,
spec_share->state.pnltype));
sm750_dev->state.pnltype));
break;
}
} else {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment