Commit 5fab851e authored by Antonino A. Daplas's avatar Antonino A. Daplas Committed by Linus Torvalds

[PATCH] i810fb: Cleanup I2C code

- The functions for reading the 1st and 2nd bus are essentially the same,
  except for the register.  Consolidate them all.

- According to Nicolas Boichat, there is an undocumented 3rd i2c bus for
  attaching daughter cards.  Add support for this.
Signed-off-by: default avatarAntonino Daplas <adaplas@pol.net>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 8a0934f2
......@@ -46,92 +46,45 @@ static void i810i2c_setscl(void *data, int state)
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOB, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
i810_writel(mmio, chan->ddc_base, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
SCL_DIR_MASK | SCL_VAL_MASK);
i810_readl(mmio, GPIOB); /* flush posted write */
i810_readl(mmio, chan->ddc_base); /* flush posted write */
}
static void i810i2c_setsda(void *data, int state)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOB, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
i810_writel(mmio, chan->ddc_base, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
SDA_DIR_MASK | SDA_VAL_MASK);
i810_readl(mmio, GPIOB); /* flush posted write */
i810_readl(mmio, chan->ddc_base); /* flush posted write */
}
static int i810i2c_getscl(void *data)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOB, SCL_DIR_MASK);
i810_writel(mmio, GPIOB, 0);
return (0 != (i810_readl(mmio, GPIOB) & SCL_VAL_IN));
i810_writel(mmio, chan->ddc_base, SCL_DIR_MASK);
i810_writel(mmio, chan->ddc_base, 0);
return ((i810_readl(mmio, chan->ddc_base) & SCL_VAL_IN) != 0);
}
static int i810i2c_getsda(void *data)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOB, SDA_DIR_MASK);
i810_writel(mmio, GPIOB, 0);
return (0 != (i810_readl(mmio, GPIOB) & SDA_VAL_IN));
}
static void i810ddc_setscl(void *data, int state)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOA, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
SCL_DIR_MASK | SCL_VAL_MASK);
i810_readl(mmio, GPIOA); /* flush posted write */
}
static void i810ddc_setsda(void *data, int state)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOA, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
SDA_DIR_MASK | SDA_VAL_MASK);
i810_readl(mmio, GPIOA); /* flush posted write */
}
static int i810ddc_getscl(void *data)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOA, SCL_DIR_MASK);
i810_writel(mmio, GPIOA, 0);
return (0 != (i810_readl(mmio, GPIOA) & SCL_VAL_IN));
}
static int i810ddc_getsda(void *data)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOA, SDA_DIR_MASK);
i810_writel(mmio, GPIOA, 0);
return (0 != (i810_readl(mmio, GPIOA) & SDA_VAL_IN));
i810_writel(mmio, chan->ddc_base, SDA_DIR_MASK);
i810_writel(mmio, chan->ddc_base, 0);
return ((i810_readl(mmio, chan->ddc_base) & SDA_VAL_IN) != 0);
}
#define I2C_ALGO_DDC_I810 0x0e0000
#define I2C_ALGO_I2C_I810 0x0f0000
static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
int conn)
static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name)
{
int rc;
......@@ -139,22 +92,11 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
chan->adapter.owner = THIS_MODULE;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->dev->dev;
switch (conn) {
case 1:
chan->adapter.id = I2C_ALGO_DDC_I810;
chan->algo.setsda = i810ddc_setsda;
chan->algo.setscl = i810ddc_setscl;
chan->algo.getsda = i810ddc_getsda;
chan->algo.getscl = i810ddc_getscl;
break;
case 2:
chan->adapter.id = I2C_ALGO_I2C_I810;
chan->adapter.id = I2C_HW_B_I810;
chan->algo.setsda = i810i2c_setsda;
chan->algo.setscl = i810i2c_setscl;
chan->algo.getsda = i810i2c_getsda;
chan->algo.getscl = i810i2c_getscl;
break;
}
chan->algo.udelay = 10;
chan->algo.mdelay = 10;
chan->algo.timeout = (HZ/2);
......@@ -168,11 +110,15 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
udelay(20);
rc = i2c_bit_add_bus(&chan->adapter);
if (rc == 0)
dev_dbg(&chan->par->dev->dev, "I2C bus %s registered.\n",name);
else
else {
dev_warn(&chan->par->dev->dev, "Failed to register I2C bus "
"%s.\n", name);
chan->par = NULL;
}
return rc;
}
......@@ -180,8 +126,14 @@ void i810_create_i2c_busses(struct i810fb_par *par)
{
par->chan[0].par = par;
par->chan[1].par = par;
i810_setup_i2c_bus(&par->chan[0], "I810-DDC", 1);
i810_setup_i2c_bus(&par->chan[1], "I810-I2C", 2);
par->chan[2].par = par;
par->chan[0].ddc_base = GPIOA;
i810_setup_i2c_bus(&par->chan[0], "I810-DDC");
par->chan[1].ddc_base = GPIOB;
i810_setup_i2c_bus(&par->chan[1], "I810-I2C");
par->chan[2].ddc_base = GPIOC;
i810_setup_i2c_bus(&par->chan[2], "I810-GPIOC");
}
void i810_delete_i2c_busses(struct i810fb_par *par)
......@@ -189,9 +141,14 @@ void i810_delete_i2c_busses(struct i810fb_par *par)
if (par->chan[0].par)
i2c_bit_del_bus(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
i2c_bit_del_bus(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
i2c_bit_del_bus(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan)
......@@ -221,6 +178,7 @@ static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan)
DPRINTK("i810-i2c: I2C Transfer successful\n");
return buf;
}
DPRINTK("i810-i2c: Unable to read EDID block.\n");
kfree(buf);
return NULL;
......@@ -233,7 +191,7 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
int i;
DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn);
if (conn < 3) {
if (conn < 4) {
for (i = 0; i < 3; i++) {
/* Do the real work */
edid = i810_do_probe_i2c_edid(&par->chan[conn-1]);
......@@ -241,11 +199,14 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
break;
}
} else {
const u8 *e = fb_firmware_edid(info->device);
if (e != NULL) {
DPRINTK("i810-i2c: Getting EDID from BIOS\n");
edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
if (edid)
memcpy(edid, fb_firmware_edid(info->device),
EDID_LENGTH);
memcpy(edid, e, EDID_LENGTH);
}
}
if (out_edid)
......@@ -253,5 +214,3 @@ int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
return (edid) ? 0 : 1;
}
......@@ -249,6 +249,7 @@ struct i810fb_i2c_chan {
struct i810fb_par *par;
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
unsigned long ddc_base;
};
struct i810fb_par {
......@@ -262,7 +263,7 @@ struct i810fb_par {
struct heap_data iring;
struct heap_data cursor_heap;
struct vgastate state;
struct i810fb_i2c_chan chan[2];
struct i810fb_i2c_chan chan[3];
atomic_t use_count;
u32 pseudo_palette[17];
unsigned long mmio_start_phys;
......
......@@ -1854,7 +1854,7 @@ static void __devinit i810fb_find_init_mode(struct fb_info *info)
#ifdef CONFIG_FB_I810_I2C
i810_create_i2c_busses(par);
for (i = 0; i < 3; i++) {
for (i = 0; i < 4; i++) {
err = i810_probe_i2c_connector(info, &par->edid, i+1);
if (!err)
break;
......
......@@ -70,6 +70,7 @@
#define HVSYNC 0x05000
#define GPIOA 0x05010
#define GPIOB 0x05014
#define GPIOC 0x0501C
/* Clock Control and Power Management Registers (06000h 06FFFh) */
#define DCLK_0D 0x06000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment