Commit 6048a3dd authored by Cory Maccarrone's avatar Cory Maccarrone Committed by Samuel Ortiz

mfd: Add HTCPLD driver

This change introduces a driver for the HTC PLD chip found
on some smartphones, such as the HTC Wizard and HTC Herald.
It works through the I2C bus and acts as a GPIO extender.
Specifically:

 * it can have several sub-devices, each with its own I2C
   address
 * Each sub-device provides 8 output and 8 input pins
 * The chip attaches to one GPIO to signal when any of the
   input GPIOs change -- at which point all chips must be
   scanned for changes

This driver implements the GPIOs throught the kernel's
GPIO and IRQ framework.  This allows any GPIO-servicing
drivers to operate on htcpld pins, such as the gpio-keys
and gpio-leds drivers.
Signed-off-by: default avatarCory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 08ff6f2a
......@@ -78,6 +78,15 @@ config HTC_PASIC3
HTC Magician devices, respectively. Actual functionality is
handled by the leds-pasic3 and ds1wm drivers.
config HTC_I2CPLD
bool "HTC I2C PLD chip support"
depends on I2C=y
help
If you say yes here you get support for the supposed CPLD
found on omap850 HTC devices like the HTC Wizard and HTC Herald.
This device provides input and output GPIOs through an I2C
interface to one or more sub-chips.
config UCB1400_CORE
tristate "Philips UCB1400 Core driver"
depends on AC97_BUS
......
......@@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
......
/*
* htc-i2cpld.c
* Chip driver for an unknown CPLD chip found on omap850 HTC devices like
* the HTC Wizard and HTC Herald.
* The cpld is located on the i2c bus and acts as an input/output GPIO
* extender.
*
* Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
*
* Based on work done in the linwizard project
* Copyright (C) 2008-2009 Angelo Arrifano <miknix@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <linux/htcpld.h>
#include <linux/gpio.h>
struct htcpld_chip {
spinlock_t lock;
/* chip info */
u8 reset;
u8 addr;
struct device *dev;
struct i2c_client *client;
/* Output details */
u8 cache_out;
struct gpio_chip chip_out;
/* Input details */
u8 cache_in;
struct gpio_chip chip_in;
u16 irqs_enabled;
uint irq_start;
int nirqs;
/*
* Work structure to allow for setting values outside of any
* possible interrupt context
*/
struct work_struct set_val_work;
};
struct htcpld_data {
/* irq info */
u16 irqs_enabled;
uint irq_start;
int nirqs;
uint chained_irq;
unsigned int int_reset_gpio_hi;
unsigned int int_reset_gpio_lo;
/* htcpld info */
struct htcpld_chip *chip;
unsigned int nchips;
};
/* There does not appear to be a way to proactively mask interrupts
* on the htcpld chip itself. So, we simply ignore interrupts that
* aren't desired. */
static void htcpld_mask(unsigned int irq)
{
struct htcpld_chip *chip = get_irq_chip_data(irq);
chip->irqs_enabled &= ~(1 << (irq - chip->irq_start));
pr_debug("HTCPLD mask %d %04x\n", irq, chip->irqs_enabled);
}
static void htcpld_unmask(unsigned int irq)
{
struct htcpld_chip *chip = get_irq_chip_data(irq);
chip->irqs_enabled |= 1 << (irq - chip->irq_start);
pr_debug("HTCPLD unmask %d %04x\n", irq, chip->irqs_enabled);
}
static int htcpld_set_type(unsigned int irq, unsigned int flags)
{
struct irq_desc *d = irq_to_desc(irq);
if (!d) {
pr_err("HTCPLD invalid IRQ: %d\n", irq);
return -EINVAL;
}
if (flags & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
/* We only allow edge triggering */
if (flags & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))
return -EINVAL;
d->status &= ~IRQ_TYPE_SENSE_MASK;
d->status |= flags;
return 0;
}
static struct irq_chip htcpld_muxed_chip = {
.name = "htcpld",
.mask = htcpld_mask,
.unmask = htcpld_unmask,
.set_type = htcpld_set_type,
};
/* To properly dispatch IRQ events, we need to read from the
* chip. This is an I2C action that could possibly sleep
* (which is bad in interrupt context) -- so we use a threaded
* interrupt handler to get around that.
*/
static irqreturn_t htcpld_handler(int irq, void *dev)
{
struct htcpld_data *htcpld = dev;
unsigned int i;
unsigned long flags;
int irqpin;
struct irq_desc *desc;
if (!htcpld) {
pr_debug("htcpld is null in ISR\n");
return IRQ_HANDLED;
}
/*
* For each chip, do a read of the chip and trigger any interrupts
* desired. The interrupts will be triggered from LSB to MSB (i.e.
* bit 0 first, then bit 1, etc.)
*
* For chips that have no interrupt range specified, just skip 'em.
*/
for (i = 0; i < htcpld->nchips; i++) {
struct htcpld_chip *chip = &htcpld->chip[i];
struct i2c_client *client;
int val;
unsigned long uval, old_val;
if (!chip) {
pr_debug("chip %d is null in ISR\n", i);
continue;
}
if (chip->nirqs == 0)
continue;
client = chip->client;
if (!client) {
pr_debug("client %d is null in ISR\n", i);
continue;
}
/* Scan the chip */
val = i2c_smbus_read_byte_data(client, chip->cache_out);
if (val < 0) {
/* Throw a warning and skip this chip */
dev_warn(chip->dev, "Unable to read from chip: %d\n",
val);
continue;
}
uval = (unsigned long)val;
spin_lock_irqsave(&chip->lock, flags);
/* Save away the old value so we can compare it */
old_val = chip->cache_in;
/* Write the new value */
chip->cache_in = uval;
spin_unlock_irqrestore(&chip->lock, flags);
/*
* For each bit in the data (starting at bit 0), trigger
* associated interrupts.
*/
for (irqpin = 0; irqpin < chip->nirqs; irqpin++) {
unsigned oldb, newb;
int flags;
irq = chip->irq_start + irqpin;
desc = irq_to_desc(irq);
flags = desc->status;
/* Run the IRQ handler, but only if the bit value
* changed, and the proper flags are set */
oldb = (old_val >> irqpin) & 1;
newb = (uval >> irqpin) & 1;
if ((!oldb && newb && (flags & IRQ_TYPE_EDGE_RISING)) ||
(oldb && !newb &&
(flags & IRQ_TYPE_EDGE_FALLING))) {
pr_debug("fire IRQ %d\n", irqpin);
desc->handle_irq(irq, desc);
}
}
}
/*
* In order to continue receiving interrupts, the int_reset_gpio must
* be asserted.
*/
if (htcpld->int_reset_gpio_hi)
gpio_set_value(htcpld->int_reset_gpio_hi, 1);
if (htcpld->int_reset_gpio_lo)
gpio_set_value(htcpld->int_reset_gpio_lo, 0);
return IRQ_HANDLED;
}
/*
* The GPIO set routines can be called from interrupt context, especially if,
* for example they're attached to the led-gpio framework and a trigger is
* enabled. As such, we declared work above in the htcpld_chip structure,
* and that work is scheduled in the set routine. The kernel can then run
* the I2C functions, which will sleep, in process context.
*/
void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
{
struct i2c_client *client;
struct htcpld_chip *chip_data;
unsigned long flags;
chip_data = container_of(chip, struct htcpld_chip, chip_out);
if (!chip_data)
return;
client = chip_data->client;
if (client == NULL)
return;
spin_lock_irqsave(&chip_data->lock, flags);
if (val)
chip_data->cache_out |= (1 << offset);
else
chip_data->cache_out &= ~(1 << offset);
spin_unlock_irqrestore(&chip_data->lock, flags);
schedule_work(&(chip_data->set_val_work));
}
void htcpld_chip_set_ni(struct work_struct *work)
{
struct htcpld_chip *chip_data;
struct i2c_client *client;
chip_data = container_of(work, struct htcpld_chip, set_val_work);
client = chip_data->client;
i2c_smbus_read_byte_data(client, chip_data->cache_out);
}
int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
{
struct htcpld_chip *chip_data;
int val = 0;
int is_input = 0;
/* Try out first */
chip_data = container_of(chip, struct htcpld_chip, chip_out);
if (!chip_data) {
/* Try in */
is_input = 1;
chip_data = container_of(chip, struct htcpld_chip, chip_in);
if (!chip_data)
return -EINVAL;
}
/* Determine if this is an input or output GPIO */
if (!is_input)
/* Use the output cache */
val = (chip_data->cache_out >> offset) & 1;
else
/* Use the input cache */
val = (chip_data->cache_in >> offset) & 1;
if (val)
return 1;
else
return 0;
}
static int htcpld_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
htcpld_chip_set(chip, offset, value);
return 0;
}
static int htcpld_direction_input(struct gpio_chip *chip,
unsigned offset)
{
/*
* No-op: this function can only be called on the input chip.
* We do however make sure the offset is within range.
*/
return (offset < chip->ngpio) ? 0 : -EINVAL;
}
int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct htcpld_chip *chip_data;
chip_data = container_of(chip, struct htcpld_chip, chip_in);
if (offset < chip_data->nirqs)
return chip_data->irq_start + offset;
else
return -EINVAL;
}
void htcpld_chip_reset(struct i2c_client *client)
{
struct htcpld_chip *chip_data = i2c_get_clientdata(client);
if (!chip_data)
return;
i2c_smbus_read_byte_data(
client, (chip_data->cache_out = chip_data->reset));
}
static int __devinit htcpld_setup_chip_irq(
struct platform_device *pdev,
int chip_index)
{
struct htcpld_data *htcpld;
struct device *dev = &pdev->dev;
struct htcpld_core_platform_data *pdata;
struct htcpld_chip *chip;
struct htcpld_chip_platform_data *plat_chip_data;
unsigned int irq, irq_end;
int ret = 0;
/* Get the platform and driver data */
pdata = dev->platform_data;
htcpld = platform_get_drvdata(pdev);
chip = &htcpld->chip[chip_index];
plat_chip_data = &pdata->chip[chip_index];
/* Setup irq handlers */
irq_end = chip->irq_start + chip->nirqs;
for (irq = chip->irq_start; irq < irq_end; irq++) {
set_irq_chip(irq, &htcpld_muxed_chip);
set_irq_chip_data(irq, chip);
set_irq_handler(irq, handle_simple_irq);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
#else
set_irq_probe(irq);
#endif
}
return ret;
}
static int __devinit htcpld_register_chip_i2c(
struct platform_device *pdev,
int chip_index)
{
struct htcpld_data *htcpld;
struct device *dev = &pdev->dev;
struct htcpld_core_platform_data *pdata;
struct htcpld_chip *chip;
struct htcpld_chip_platform_data *plat_chip_data;
struct i2c_adapter *adapter;
struct i2c_client *client;
struct i2c_board_info info;
/* Get the platform and driver data */
pdata = dev->platform_data;
htcpld = platform_get_drvdata(pdev);
chip = &htcpld->chip[chip_index];
plat_chip_data = &pdata->chip[chip_index];
adapter = i2c_get_adapter(pdata->i2c_adapter_id);
if (adapter == NULL) {
/* Eek, no such I2C adapter! Bail out. */
dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
plat_chip_data->addr, pdata->i2c_adapter_id);
return -ENODEV;
}
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
dev_warn(dev, "i2c adapter %d non-functional\n",
pdata->i2c_adapter_id);
return -EINVAL;
}
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = plat_chip_data->addr;
strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE);
info.platform_data = chip;
/* Add the I2C device. This calls the probe() function. */
client = i2c_new_device(adapter, &info);
if (!client) {
/* I2C device registration failed, contineu with the next */
dev_warn(dev, "Unable to add I2C device for 0x%x\n",
plat_chip_data->addr);
return -ENODEV;
}
i2c_set_clientdata(client, chip);
snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%d", client->addr);
chip->client = client;
/* Reset the chip */
htcpld_chip_reset(client);
chip->cache_in = i2c_smbus_read_byte_data(client, chip->cache_out);
return 0;
}
static void __devinit htcpld_unregister_chip_i2c(
struct platform_device *pdev,
int chip_index)
{
struct htcpld_data *htcpld;
struct htcpld_chip *chip;
/* Get the platform and driver data */
htcpld = platform_get_drvdata(pdev);
chip = &htcpld->chip[chip_index];
if (chip->client)
i2c_unregister_device(chip->client);
}
static int __devinit htcpld_register_chip_gpio(
struct platform_device *pdev,
int chip_index)
{
struct htcpld_data *htcpld;
struct device *dev = &pdev->dev;
struct htcpld_core_platform_data *pdata;
struct htcpld_chip *chip;
struct htcpld_chip_platform_data *plat_chip_data;
struct gpio_chip *gpio_chip;
int ret = 0;
/* Get the platform and driver data */
pdata = dev->platform_data;
htcpld = platform_get_drvdata(pdev);
chip = &htcpld->chip[chip_index];
plat_chip_data = &pdata->chip[chip_index];
/* Setup the GPIO chips */
gpio_chip = &(chip->chip_out);
gpio_chip->label = "htcpld-out";
gpio_chip->dev = dev;
gpio_chip->owner = THIS_MODULE;
gpio_chip->get = htcpld_chip_get;
gpio_chip->set = htcpld_chip_set;
gpio_chip->direction_input = NULL;
gpio_chip->direction_output = htcpld_direction_output;
gpio_chip->base = plat_chip_data->gpio_out_base;
gpio_chip->ngpio = plat_chip_data->num_gpios;
gpio_chip = &(chip->chip_in);
gpio_chip->label = "htcpld-in";
gpio_chip->dev = dev;
gpio_chip->owner = THIS_MODULE;
gpio_chip->get = htcpld_chip_get;
gpio_chip->set = NULL;
gpio_chip->direction_input = htcpld_direction_input;
gpio_chip->direction_output = NULL;
gpio_chip->to_irq = htcpld_chip_to_irq;
gpio_chip->base = plat_chip_data->gpio_in_base;
gpio_chip->ngpio = plat_chip_data->num_gpios;
/* Add the GPIO chips */
ret = gpiochip_add(&(chip->chip_out));
if (ret) {
dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
plat_chip_data->addr, ret);
return ret;
}
ret = gpiochip_add(&(chip->chip_in));
if (ret) {
int error;
dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
plat_chip_data->addr, ret);
error = gpiochip_remove(&(chip->chip_out));
if (error)
dev_warn(dev, "Error while trying to unregister gpio chip: %d\n", error);
return ret;
}
return 0;
}
static int __devinit htcpld_setup_chips(struct platform_device *pdev)
{
struct htcpld_data *htcpld;
struct device *dev = &pdev->dev;
struct htcpld_core_platform_data *pdata;
int i;
/* Get the platform and driver data */
pdata = dev->platform_data;
htcpld = platform_get_drvdata(pdev);
/* Setup each chip's output GPIOs */
htcpld->nchips = pdata->num_chip;
htcpld->chip = kzalloc(sizeof(struct htcpld_chip) * htcpld->nchips,
GFP_KERNEL);
if (!htcpld->chip) {
dev_warn(dev, "Unable to allocate memory for chips\n");
return -ENOMEM;
}
/* Add the chips as best we can */
for (i = 0; i < htcpld->nchips; i++) {
int ret;
/* Setup the HTCPLD chips */
htcpld->chip[i].reset = pdata->chip[i].reset;
htcpld->chip[i].cache_out = pdata->chip[i].reset;
htcpld->chip[i].cache_in = 0;
htcpld->chip[i].dev = dev;
htcpld->chip[i].irq_start = pdata->chip[i].irq_base;
htcpld->chip[i].nirqs = pdata->chip[i].num_irqs;
INIT_WORK(&(htcpld->chip[i].set_val_work), &htcpld_chip_set_ni);
spin_lock_init(&(htcpld->chip[i].lock));
/* Setup the interrupts for the chip */
if (htcpld->chained_irq) {
ret = htcpld_setup_chip_irq(pdev, i);
if (ret)
continue;
}
/* Register the chip with I2C */
ret = htcpld_register_chip_i2c(pdev, i);
if (ret)
continue;
/* Register the chips with the GPIO subsystem */
ret = htcpld_register_chip_gpio(pdev, i);
if (ret) {
/* Unregister the chip from i2c and continue */
htcpld_unregister_chip_i2c(pdev, i);
continue;
}
dev_info(dev, "Registered chip at 0x%x\n", pdata->chip[i].addr);
}
return 0;
}
static int __devinit htcpld_core_probe(struct platform_device *pdev)
{
struct htcpld_data *htcpld;
struct device *dev = &pdev->dev;
struct htcpld_core_platform_data *pdata;
struct resource *res;
int ret = 0;
if (!dev)
return -ENODEV;
pdata = dev->platform_data;
if (!pdata) {
dev_warn(dev, "Platform data not found for htcpld core!\n");
return -ENXIO;
}
htcpld = kzalloc(sizeof(struct htcpld_data), GFP_KERNEL);
if (!htcpld)
return -ENOMEM;
/* Find chained irq */
ret = -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res) {
int flags;
htcpld->chained_irq = res->start;
/* Setup the chained interrupt handler */
flags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
ret = request_threaded_irq(htcpld->chained_irq,
NULL, htcpld_handler,
flags, pdev->name, htcpld);
if (ret) {
dev_warn(dev, "Unable to setup chained irq handler: %d\n", ret);
goto fail;
} else
device_init_wakeup(dev, 0);
}
/* Set the driver data */
platform_set_drvdata(pdev, htcpld);
/* Setup the htcpld chips */
ret = htcpld_setup_chips(pdev);
if (ret)
goto fail;
/* Request the GPIO(s) for the int reset and set them up */
if (pdata->int_reset_gpio_hi) {
ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
if (ret) {
/*
* If it failed, that sucks, but we can probably
* continue on without it.
*/
dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
htcpld->int_reset_gpio_hi = 0;
} else {
htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
gpio_set_value(htcpld->int_reset_gpio_hi, 1);
}
}
if (pdata->int_reset_gpio_lo) {
ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
if (ret) {
/*
* If it failed, that sucks, but we can probably
* continue on without it.
*/
dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
htcpld->int_reset_gpio_lo = 0;
} else {
htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
gpio_set_value(htcpld->int_reset_gpio_lo, 0);
}
}
dev_info(dev, "Initialized successfully\n");
return 0;
fail:
kfree(htcpld);
return ret;
}
/* The I2C Driver -- used internally */
static const struct i2c_device_id htcpld_chip_id[] = {
{ "htcpld-chip", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, htcpld_chip_id);
static struct i2c_driver htcpld_chip_driver = {
.driver = {
.name = "htcpld-chip",
},
.id_table = htcpld_chip_id,
};
/* The Core Driver */
static struct platform_driver htcpld_core_driver = {
.driver = {
.name = "i2c-htcpld",
},
};
static int __init htcpld_core_init(void)
{
int ret;
/* Register the I2C Chip driver */
ret = i2c_add_driver(&htcpld_chip_driver);
if (ret)
return ret;
/* Probe for our chips */
return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
}
static void __exit htcpld_core_exit(void)
{
i2c_del_driver(&htcpld_chip_driver);
platform_driver_unregister(&htcpld_core_driver);
}
module_init(htcpld_core_init);
module_exit(htcpld_core_exit);
MODULE_AUTHOR("Cory Maccarrone <darkstar6262@gmail.com>");
MODULE_DESCRIPTION("I2C HTC PLD Driver");
MODULE_LICENSE("GPL");
#ifndef __LINUX_HTCPLD_H
#define __LINUX_HTCPLD_H
struct htcpld_chip_platform_data {
unsigned int addr;
unsigned int reset;
unsigned int num_gpios;
unsigned int gpio_out_base;
unsigned int gpio_in_base;
unsigned int irq_base;
unsigned int num_irqs;
};
struct htcpld_core_platform_data {
unsigned int int_reset_gpio_hi;
unsigned int int_reset_gpio_lo;
unsigned int i2c_adapter_id;
struct htcpld_chip_platform_data *chip;
unsigned int num_chip;
};
#endif /* __LINUX_HTCPLD_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment