scsi: remove ordered_tags scsi_device field

Remove the ordered_tags field, we haven't been issuing ordered tags based
on it since the big barrier rework in 2010.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/message/fusion/mptscsih.c

@@ -2400,9 +2400,8 @@ mptscsih_slave_configure(struct scsi_device *sdev)
 	mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH,
 				    SCSI_QDEPTH_DEFAULT);
 	dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-		"tagged %d, simple %d, ordered %d\n",
-		ioc->name,sdev->tagged_supported, sdev->simple_tags,
-		sdev->ordered_tags));
+		"tagged %d, simple %d\n",
+		ioc->name,sdev->tagged_supported, sdev->simple_tags));
 
 	blk_queue_dma_alignment (sdev->request_queue, 512 - 1);
 

drivers/scsi/bfa/bfad_im.c

@@ -868,11 +868,6 @@ bfad_ramp_up_qdepth(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
 			if (bfa_lun_queue_depth > tmp_sdev->queue_depth) {
 				if (tmp_sdev->id != sdev->id)
 					continue;
-				if (tmp_sdev->ordered_tags)
-					scsi_adjust_queue_depth(tmp_sdev,
-						MSG_ORDERED_TAG,
-						tmp_sdev->queue_depth + 1);
-				else
 				scsi_adjust_queue_depth(tmp_sdev,
 					MSG_SIMPLE_TAG,
 					tmp_sdev->queue_depth + 1);

drivers/scsi/mpt2sas/mpt2sas_scsih.c

@@ -1246,9 +1246,9 @@ _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
 
 	if (sdev->inquiry_len > 7)
 		sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), "
-		"simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
+		"simple(%d), scsi_level(%d), cmd_que(%d)\n",
 		sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags,
-		sdev->ordered_tags, sdev->scsi_level,
+		sdev->scsi_level,
 		(sdev->inquiry[7] & 2) >> 1);
 
 	return sdev->queue_depth;
@@ -3944,16 +3944,8 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 		mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
 
 	/* set tags */
-	if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) {
-		if (scmd->device->tagged_supported) {
-			if (scmd->device->ordered_tags)
-				mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
-			else
-				mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-		} else
-			mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-	} else
 	mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+
 	/* Make sure Device is not raid volume.
 	 * We do not expose raid functionality to upper layer for warpdrive.
 	 */

drivers/scsi/mpt3sas/mpt3sas_scsih.c

@@ -1114,9 +1114,9 @@ _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
 
 	if (sdev->inquiry_len > 7)
 		sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " \
-		"simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
+		"simple(%d), scsi_level(%d), cmd_que(%d)\n",
 		sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags,
-		sdev->ordered_tags, sdev->scsi_level,
+		sdev->scsi_level,
 		(sdev->inquiry[7] & 2) >> 1);
 
 	return sdev->queue_depth;
@@ -3563,15 +3563,6 @@ _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 		mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
 
 	/* set tags */
-	if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) {
-		if (scmd->device->tagged_supported) {
-			if (scmd->device->ordered_tags)
-				mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
-			else
-				mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-		} else
-			mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
-	} else
 	mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 
 	if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&

drivers/scsi/qla2xxx/qla_os.c

@@ -1442,9 +1442,6 @@ static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth)
 	if (req->max_q_depth <= sdev->queue_depth || req->max_q_depth < qdepth)
 		return;
 
-	if (sdev->ordered_tags)
-		scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, qdepth);
-	else
 	scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth);
 
 	ql_dbg(ql_dbg_io, vha, 0x302a,

drivers/scsi/scsi.c

@@ -789,19 +789,13 @@ void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags)
 	sdev->queue_depth = tags;
 	switch (tagged) {
 		case 0:
-			sdev->ordered_tags = 0;
 			sdev->simple_tags = 0;
 			break;
 		case MSG_ORDERED_TAG:
-			sdev->ordered_tags = 1;
-			sdev->simple_tags = 1;
-			break;
 		case MSG_SIMPLE_TAG:
-			sdev->ordered_tags = 0;
 			sdev->simple_tags = 1;
 			break;
 		default:
-			sdev->ordered_tags = 0;
 			sdev->simple_tags = 0;
 			sdev_printk(KERN_WARNING, sdev,
 				    "scsi_adjust_queue_depth, bad queue type, "
@@ -858,9 +852,6 @@ int scsi_track_queue_full(struct scsi_device *sdev, int depth)
 		return -1;
 	}
 
-	if (sdev->ordered_tags)
-		scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
-	else
 	scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
 	return depth;
 }

drivers/scsi/scsi_sysfs.c

@@ -727,9 +727,7 @@ show_queue_type_field(struct device *dev, struct device_attribute *attr,
 	struct scsi_device *sdev = to_scsi_device(dev);
 	const char *name = "none";
 
-	if (sdev->ordered_tags)
-		name = "ordered";
-	else if (sdev->simple_tags)
+	if (sdev->simple_tags)
 		name = "simple";
 
 	return snprintf(buf, 20, "%s\n", name);
@@ -747,9 +745,12 @@ store_queue_type_field(struct device *dev, struct device_attribute *attr,
 	if (!sdev->tagged_supported || !sht->change_queue_type)
 		return -EINVAL;
 
-	if (strncmp(buf, "ordered", 7) == 0)
-		tag_type = MSG_ORDERED_TAG;
-	else if (strncmp(buf, "simple", 6) == 0)
+	/*
+	 * We're never issueing order tags these days, but allow the value
+	 * for backwards compatibility.
+	 */
+	if (strncmp(buf, "ordered", 7) == 0 ||
+	    strncmp(buf, "simple", 6) == 0)
 		tag_type = MSG_SIMPLE_TAG;
 	else if (strncmp(buf, "none", 4) != 0)
 		return -EINVAL;

drivers/scsi/vmw_pvscsi.c

@@ -526,9 +526,9 @@ static int pvscsi_change_queue_depth(struct scsi_device *sdev,
 
 	if (sdev->inquiry_len > 7)
 		sdev_printk(KERN_INFO, sdev,
-			    "qdepth(%d), tagged(%d), simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
+			    "qdepth(%d), tagged(%d), simple(%d), scsi_level(%d), cmd_que(%d)\n",
 			    sdev->queue_depth, sdev->tagged_supported,
-			    sdev->simple_tags, sdev->ordered_tags,
+			    sdev->simple_tags,
 			    sdev->scsi_level, (sdev->inquiry[7] & 2) >> 1);
 	return sdev->queue_depth;
 }

drivers/target/loopback/tcm_loop.c

@@ -135,18 +135,6 @@ static int tcm_loop_change_queue_depth(
 	return sdev->queue_depth;
 }
 
-/*
- * Locate the SAM Task Attr from struct scsi_cmnd *
- */
-static int tcm_loop_sam_attr(struct scsi_cmnd *sc, int tag)
-{
-	if (sc->device->tagged_supported &&
-	    sc->device->ordered_tags && tag >= 0)
-		return MSG_ORDERED_TAG;
-
-	return MSG_SIMPLE_TAG;
-}
-
 static void tcm_loop_submission_work(struct work_struct *work)
 {
 	struct tcm_loop_cmd *tl_cmd =
@@ -205,7 +193,7 @@ static void tcm_loop_submission_work(struct work_struct *work)
 
 	rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
 			&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
-			transfer_length, tcm_loop_sam_attr(sc, tl_cmd->sc_cmd_tag),
+			transfer_length, MSG_SIMPLE_TAG,
 			sc->sc_data_direction, 0,
 			scsi_sglist(sc), scsi_sg_count(sc),
 			sgl_bidi, sgl_bidi_count,

include/scsi/scsi_device.h

@@ -141,7 +141,6 @@ struct scsi_device {
 	unsigned ppr:1;		/* Device supports PPR messages */
 	unsigned tagged_supported:1;	/* Supports SCSI-II tagged queuing */
 	unsigned simple_tags:1;	/* simple queue tag messages are enabled */
-	unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
 	unsigned was_reset:1;	/* There was a bus reset on the bus for 
 				 * this device */
 	unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN

include/scsi/scsi_tcq.h

@@ -21,17 +21,11 @@ int scsi_change_queue_type(struct scsi_device *sdev, int tag_type);
 /**
  * scsi_get_tag_type - get the type of tag the device supports
  * @sdev:	the scsi device
- *
- * Notes:
- *	If the drive only supports simple tags, returns MSG_SIMPLE_TAG
- *	if it supports all tag types, returns MSG_ORDERED_TAG.
  */
 static inline int scsi_get_tag_type(struct scsi_device *sdev)
 {
 	if (!sdev->tagged_supported)
 		return 0;
-	if (sdev->ordered_tags)
-		return MSG_ORDERED_TAG;
 	if (sdev->simple_tags)
 		return MSG_SIMPLE_TAG;
 	return 0;
@@ -41,15 +35,12 @@ static inline void scsi_set_tag_type(struct scsi_device *sdev, int tag)
 {
 	switch (tag) {
 	case MSG_ORDERED_TAG:
-		sdev->ordered_tags = 1;
-		/* fall through */
 	case MSG_SIMPLE_TAG:
 		sdev->simple_tags = 1;
 		break;
 	case 0:
 		/* fall through */
 	default:
-		sdev->ordered_tags = 0;
 		sdev->simple_tags = 0;
 		break;
 	}