Commit 60d7a21a authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2

Pull nios2 update from Ley Foon Tan:

 - clean up old Kconfig options from defconfig

 - remove leading 0x and 0s from bindings notation in dts files

* tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: defconfig: Cleanup from old Kconfig options
  nios2: dts: Remove leading 0x and 0s from bindings notation
parents d48fcbd8 e0691ebb
......@@ -29,7 +29,7 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu: cpu@0x0 {
cpu: cpu@0 {
device_type = "cpu";
compatible = "altr,nios2-1.0";
reg = <0x00000000>;
......@@ -69,7 +69,7 @@ sopc@0 {
compatible = "altr,avalon", "simple-bus";
bus-frequency = <125000000>;
pb_cpu_to_io: bridge@0x8000000 {
pb_cpu_to_io: bridge@8000000 {
compatible = "simple-bus";
reg = <0x08000000 0x00800000>;
#address-cells = <1>;
......@@ -83,7 +83,7 @@ pb_cpu_to_io: bridge@0x8000000 {
<0x00008000 0x08008000 0x00000020>,
<0x00400000 0x08400000 0x00000020>;
timer_1ms: timer@0x400000 {
timer_1ms: timer@400000 {
compatible = "altr,timer-1.0";
reg = <0x00400000 0x00000020>;
interrupt-parent = <&cpu>;
......@@ -91,7 +91,7 @@ timer_1ms: timer@0x400000 {
clock-frequency = <125000000>;
};
timer_0: timer@0x8000 {
timer_0: timer@8000 {
compatible = "altr,timer-1.0";
reg = < 0x00008000 0x00000020 >;
interrupt-parent = < &cpu >;
......@@ -99,14 +99,14 @@ timer_0: timer@0x8000 {
clock-frequency = < 125000000 >;
};
jtag_uart: serial@0x4d50 {
jtag_uart: serial@4d50 {
compatible = "altr,juart-1.0";
reg = <0x00004d50 0x00000008>;
interrupt-parent = <&cpu>;
interrupts = <1>;
};
tse_mac: ethernet@0x4000 {
tse_mac: ethernet@4000 {
compatible = "altr,tse-1.0";
reg = <0x00004000 0x00000400>,
<0x00004400 0x00000040>,
......@@ -133,7 +133,7 @@ phy0: ethernet-phy@18 {
};
};
uart: serial@0x4c80 {
uart: serial@4c80 {
compatible = "altr,uart-1.0";
reg = <0x00004c80 0x00000020>;
interrupt-parent = <&cpu>;
......@@ -143,7 +143,7 @@ uart: serial@0x4c80 {
};
};
cfi_flash_64m: flash@0x0 {
cfi_flash_64m: flash@0 {
compatible = "cfi-flash";
reg = <0x00000000 0x04000000>;
bank-width = <2>;
......
......@@ -33,7 +33,6 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
......
......@@ -35,7 +35,6 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment