Commit 61af4d8d authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Maxime Ripard

clk: sunxi: Add mod0 and mmc module clock support for A80

The module 0 style clocks, or storage module clocks as named in the
official SDK, are almost the same as the module 0 clocks on earlier
Allwinner SoCs. The only difference is wider mux register bits.

As with earlier Allwinner SoCs, mmc module clocks are a special case
of mod0 clocks, with phase controls for 2 child clocks, output and
sample.

This patch adds support for both.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent eb378df7
...@@ -56,7 +56,9 @@ Required properties: ...@@ -56,7 +56,9 @@ Required properties:
"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
"allwinner,sun4i-a10-mmc-clk" - for the MMC clock "allwinner,sun4i-a10-mmc-clk" - for the MMC clock
"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
"allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80
"allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
"allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-out-clk" - for the external output clocks
"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
...@@ -72,7 +74,8 @@ Required properties for all clocks: ...@@ -72,7 +74,8 @@ Required properties for all clocks:
- #clock-cells : from common clock binding; shall be set to 0 except for - #clock-cells : from common clock binding; shall be set to 0 except for
the following compatibles where it shall be set to 1: the following compatibles where it shall be set to 1:
"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk", "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk" "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
"allwinner,*-usb-clk", "allwinner,*-mmc-clk"
- clock-output-names : shall be the corresponding names of the outputs. - clock-output-names : shall be the corresponding names of the outputs.
If the clock module only has one output, the name shall be the If the clock module only has one output, the name shall be the
module name. module name.
...@@ -94,7 +97,7 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output ...@@ -94,7 +97,7 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
is the normal PLL6 output, or "pll6". The second output is rate doubled is the normal PLL6 output, or "pll6". The second output is rate doubled
PLL6, or "pll6x2". PLL6, or "pll6x2".
The "allwinner,sun4i-a10-mmc-clk" has three different outputs: the The "allwinner,*-mmc-clk" clocks have three different outputs: the
main clock, with the ID 0, and the output and sample clocks, with the main clock, with the ID 0, and the output and sample clocks, with the
IDs 1 and 2, respectively. IDs 1 and 2, respectively.
......
...@@ -130,6 +130,30 @@ static struct platform_driver sun4i_a10_mod0_clk_driver = { ...@@ -130,6 +130,30 @@ static struct platform_driver sun4i_a10_mod0_clk_driver = {
}; };
module_platform_driver(sun4i_a10_mod0_clk_driver); module_platform_driver(sun4i_a10_mod0_clk_driver);
static const struct factors_data sun9i_a80_mod0_data __initconst = {
.enable = 31,
.mux = 24,
.muxmask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
.table = &sun4i_a10_mod0_config,
.getter = sun4i_a10_get_mod0_factors,
};
static void __init sun9i_a80_mod0_setup(struct device_node *node)
{
void __iomem *reg;
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
if (IS_ERR(reg)) {
pr_err("Could not get registers for mod0-clk: %s\n",
node->name);
return;
}
sunxi_factors_register(node, &sun9i_a80_mod0_data,
&sun4i_a10_mod0_lock, reg);
}
CLK_OF_DECLARE(sun9i_a80_mod0, "allwinner,sun9i-a80-mod0-clk", sun9i_a80_mod0_setup);
static DEFINE_SPINLOCK(sun5i_a13_mbus_lock); static DEFINE_SPINLOCK(sun5i_a13_mbus_lock);
static void __init sun5i_a13_mbus_setup(struct device_node *node) static void __init sun5i_a13_mbus_setup(struct device_node *node)
...@@ -358,3 +382,11 @@ static void __init sun4i_a10_mmc_setup(struct device_node *node) ...@@ -358,3 +382,11 @@ static void __init sun4i_a10_mmc_setup(struct device_node *node)
sunxi_mmc_setup(node, &sun4i_a10_mod0_data, &sun4i_a10_mmc_lock); sunxi_mmc_setup(node, &sun4i_a10_mod0_data, &sun4i_a10_mmc_lock);
} }
CLK_OF_DECLARE(sun4i_a10_mmc, "allwinner,sun4i-a10-mmc-clk", sun4i_a10_mmc_setup); CLK_OF_DECLARE(sun4i_a10_mmc, "allwinner,sun4i-a10-mmc-clk", sun4i_a10_mmc_setup);
static DEFINE_SPINLOCK(sun9i_a80_mmc_lock);
static void __init sun9i_a80_mmc_setup(struct device_node *node)
{
sunxi_mmc_setup(node, &sun9i_a80_mod0_data, &sun9i_a80_mmc_lock);
}
CLK_OF_DECLARE(sun9i_a80_mmc, "allwinner,sun9i-a80-mmc-clk", sun9i_a80_mmc_setup);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment