Skip to content

L
linux
Commit 63d5381e authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

Merge redhat.com:/spare/repo/netdev-2.6/misc 

into redhat.com:/spare/repo/net-drivers-2.6
parents fc3b6177 2210dfec
Show whitespace changes
Inline Side-by-side
Showing with 401 additions and 318 deletions
drivers/net/pcmcia/3c574_cs.c
View file @ 63d5381e
......@@ -384,6 +384,8 @@ static void tc574_detach(dev_link_t *link)
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
static void tc574_config(dev_link_t *link)
{
client_handle_t handle = link->handle;
......@@ -396,6 +398,7 @@ static void tc574_config(dev_link_t *link)
ioaddr_t ioaddr;
u16 *phys_addr;
char *cardname;
union wn3_config config;
phys_addr = (u16 *)dev->dev_addr;
......@@ -431,15 +434,7 @@ static void tc574_config(dev_link_t *link)
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
goto failed;
}
ioaddr = dev->base_addr;
strcpy(lp->node.dev_name, dev->name);
link->dev = &lp->node;
link->state &= ~DEV_CONFIG_PENDING;
/* The 3c574 normally uses an EEPROM for configuration info, including
the hardware address. The future products may include a modem chip
......@@ -467,24 +462,14 @@ static void tc574_config(dev_link_t *link)
} else
cardname = "3Com 3c574";
printk(KERN_INFO "%s: %s at io %#3lx, irq %d, hw_addr ",
dev->name, cardname, dev->base_addr, dev->irq);
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : ".\n"));
{
u_char mcr, *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
union wn3_config config;
u_char mcr;
outw(2<<11, ioaddr + RunnerRdCtrl);
mcr = inb(ioaddr + 2);
outw(0<<11, ioaddr + RunnerRdCtrl);
printk(KERN_INFO " ASIC rev %d,", mcr>>3);
EL3WINDOW(3);
config.i = inl(ioaddr + Wn3_Config);
printk(" %dK FIFO split %s Rx:Tx, %sMII interface.\n",
8 << config.u.ram_size, ram_split[config.u.ram_split],
config.u.autoselect ? "autoselect " : "");
lp->default_media = config.u.xcvr;
lp->autoselect = config.u.autoselect;
}
......@@ -531,6 +516,25 @@ static void tc574_config(dev_link_t *link)
}
}
link->state &= ~DEV_CONFIG_PENDING;
link->dev = &lp->node;
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
link->dev = NULL;
goto failed;
}
strcpy(lp->node.dev_name, dev->name);
printk(KERN_INFO "%s: %s at io %#3lx, irq %d, hw_addr ",
dev->name, cardname, dev->base_addr, dev->irq);
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : ".\n"));
printk(" %dK FIFO split %s Rx:Tx, %sMII interface.\n",
8 << config.u.ram_size, ram_split[config.u.ram_split],
config.u.autoselect ? "autoselect " : "");
return;
cs_failed:
......
drivers/net/pcmcia/3c589_cs.c
View file @ 63d5381e
......@@ -308,7 +308,7 @@ static void tc589_config(dev_link_t *link)
tuple_t tuple;
cisparse_t parse;
u16 buf[32], *phys_addr;
int last_fn, last_ret, i, j, multi = 0;
int last_fn, last_ret, i, j, multi = 0, fifo;
ioaddr_t ioaddr;
char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
......@@ -357,11 +357,6 @@ static void tc589_config(dev_link_t *link)
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
if (register_netdev(dev) != 0) {
printk(KERN_ERR "3c589_cs: register_netdev() failed\n");
goto failed;
}
ioaddr = dev->base_addr;
EL3WINDOW(0);
......@@ -382,13 +377,10 @@ static void tc589_config(dev_link_t *link)
}
}
strcpy(lp->node.dev_name, dev->name);
link->dev = &lp->node;
link->state &= ~DEV_CONFIG_PENDING;
/* The address and resource configuration register aren't loaded from
the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version. */
outw(0x3f00, ioaddr + 8);
fifo = inl(ioaddr);
/* The if_port symbol can be set when the module is loaded */
if ((if_port >= 0) && (if_port <= 3))
......@@ -396,14 +388,24 @@ static void tc589_config(dev_link_t *link)
else
printk(KERN_ERR "3c589_cs: invalid if_port requested\n");
link->dev = &lp->node;
link->state &= ~DEV_CONFIG_PENDING;
if (register_netdev(dev) != 0) {
printk(KERN_ERR "3c589_cs: register_netdev() failed\n");
link->dev = NULL;
goto failed;
}
strcpy(lp->node.dev_name, dev->name);
printk(KERN_INFO "%s: 3Com 3c%s, io %#3lx, irq %d, hw_addr ",
dev->name, (multi ? "562" : "589"), dev->base_addr,
dev->irq);
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
i = inl(ioaddr);
printk(KERN_INFO " %dK FIFO split %s Rx:Tx, %s xcvr\n",
(i & 7) ? 32 : 8, ram_split[(i >> 16) & 3],
(fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
if_names[dev->if_port]);
return;
......
drivers/net/pcmcia/axnet_cs.c
View file @ 63d5381e
......@@ -430,19 +430,11 @@ static void axnet_config(dev_link_t *link)
ei_status.block_input = &block_input;
ei_status.block_output = &block_output;
strcpy(info->node.dev_name, dev->name);
if (inb(dev->base_addr + AXNET_TEST) != 0)
info->flags |= IS_AX88790;
else
info->flags |= IS_AX88190;
printk(KERN_INFO "%s: Asix AX88%d90: io %#3lx, irq %d, hw_addr ",
dev->name, ((info->flags & IS_AX88790) ? 7 : 1),
dev->base_addr, dev->irq);
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
if (info->flags & IS_AX88790)
outb(0x10, dev->base_addr + AXNET_GPIO); /* select Internal PHY */
......@@ -463,19 +455,27 @@ static void axnet_config(dev_link_t *link)
}
info->phy_id = (i < 32) ? i : -1;
if (i < 32) {
DEBUG(0, " MII transceiver at index %d, status %x.\n", i, j);
} else {
printk(KERN_NOTICE " No MII transceivers found!\n");
}
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n");
link->dev = NULL;
goto failed;
}
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
strcpy(info->node.dev_name, dev->name);
printk(KERN_INFO "%s: Asix AX88%d90: io %#3lx, irq %d, hw_addr ",
dev->name, ((info->flags & IS_AX88790) ? 7 : 1),
dev->base_addr, dev->irq);
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
if (info->phy_id != -1) {
DEBUG(0, " MII transceiver at index %d, status %x.\n", info->phy_id, j);
} else {
printk(KERN_NOTICE " No MII transceivers found!\n");
}
return;
cs_failed:
......
drivers/net/pcmcia/com20020_cs.c
View file @ 63d5381e
......@@ -141,7 +141,6 @@ static dev_link_t *dev_list;
typedef struct com20020_dev_t {
struct net_device *dev;
int dev_configured;
dev_node_t node;
} com20020_dev_t;
......@@ -277,13 +276,10 @@ static void com20020_detach(dev_link_t *link)
dev = info->dev;
if (dev)
{
if (info->dev_configured)
if (link->dev)
{
DEBUG(1,"unregister...\n");
if (netif_running(dev))
dev->stop(dev);
unregister_netdev(dev);
/*
......@@ -398,17 +394,18 @@ static void com20020_config(dev_link_t *link)
lp->card_name = "PCMCIA COM20020";
lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
i = com20020_found(dev, 0); /* calls register_netdev */
if (i != 0) {
DEBUG(1,KERN_NOTICE "com20020_cs: com20020_found() failed\n");
link->dev = NULL;
goto failed;
}
info->dev_configured = 1;
strcpy(info->node.dev_name, dev->name);
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
DEBUG(1,KERN_INFO "%s: port %#3lx, irq %d\n",
dev->name, dev->base_addr, dev->irq);
......
drivers/net/pcmcia/fmvj18x_cs.c
View file @ 63d5381e
......@@ -510,10 +510,6 @@ static void fmvj18x_config(dev_link_t *link)
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
goto failed;
}
if (link->io.BasePort2 != 0)
fmvj18x_setup_mfc(link);
......@@ -575,7 +571,6 @@ static void fmvj18x_config(dev_link_t *link)
/* Read MACID from Buggy CIS */
if (fmvj18x_get_hwinfo(link, tuple.TupleData) == -1) {
printk(KERN_NOTICE "fmvj18x_cs: unable to read hardware net address.\n");
unregister_netdev(dev);
goto failed;
}
for (i = 0 ; i < 6; i++) {
......@@ -592,10 +587,18 @@ static void fmvj18x_config(dev_link_t *link)
break;
}
strcpy(lp->node.dev_name, dev->name);
lp->cardtype = cardtype;
link->dev = &lp->node;
link->state &= ~DEV_CONFIG_PENDING;
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
link->dev = NULL;
goto failed;
}
strcpy(lp->node.dev_name, dev->name);
lp->cardtype = cardtype;
/* print current configuration */
printk(KERN_INFO "%s: %s, sram %s, port %#3lx, irq %d, hw_addr ",
dev->name, card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
......@@ -603,7 +606,6 @@ static void fmvj18x_config(dev_link_t *link)
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
link->state &= ~DEV_CONFIG_PENDING;
return;
cs_failed:
......
drivers/net/pcmcia/ibmtr_cs.c
View file @ 63d5381e
......@@ -317,13 +317,10 @@ static void ibmtr_config(dev_link_t *link)
/* Try PRIMARY card at 0xA20-0xA23 */
link->io.BasePort1 = 0xA20;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS) {
memcpy(info->node.dev_name, "tr0\0", 4);
} else {
if (i != CS_SUCCESS) {
/* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
link->io.BasePort1 = 0xA24;
CS_CHECK(RequestIO, pcmcia_request_io(link->handle, &link->io));
memcpy(info->node.dev_name, "tr1\0", 4);
}
dev->base_addr = link->io.BasePort1;
......@@ -367,15 +364,17 @@ static void ibmtr_config(dev_link_t *link)
Adapters Technical Reference" SC30-3585 for this info. */
ibmtr_hw_setup(dev, mmiobase);
i = ibmtr_probe_card(dev);
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
i = ibmtr_probe_card(dev);
if (i != 0) {
printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n");
link->dev = NULL;
goto failed;
}
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
strcpy(info->node.dev_name, dev->name);
printk(KERN_INFO "%s: port %#3lx, irq %d,",
dev->name, dev->base_addr, dev->irq);
......
drivers/net/pcmcia/nmclan_cs.c
View file @ 63d5381e
......@@ -734,11 +734,6 @@ static void nmclan_config(dev_link_t *link)
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
i = register_netdev(dev);
if (i != 0) {
printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n");
goto failed;
}
ioaddr = dev->base_addr;
......@@ -777,10 +772,18 @@ static void nmclan_config(dev_link_t *link)
else
printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n");
strcpy(lp->node.dev_name, dev->name);
link->dev = &lp->node;
link->state &= ~DEV_CONFIG_PENDING;
i = register_netdev(dev);
if (i != 0) {
printk(KERN_NOTICE "nmclan_cs: register_netdev() failed\n");
link->dev = NULL;
goto failed;
}
strcpy(lp->node.dev_name, dev->name);
printk(KERN_INFO "%s: nmclan: port %#3lx, irq %d, %s port, hw_addr ",
dev->name, dev->base_addr, dev->irq, if_names[dev->if_port]);
for (i = 0; i < 6; i++)
......
drivers/net/pcmcia/smc91c92_cs.c
View file @ 63d5381e
......@@ -901,6 +901,7 @@ static void smc91c92_config(dev_link_t *link)
char *name;
int i, j, rev;
ioaddr_t ioaddr;
u_long mir;
DEBUG(0, "smc91c92_config(0x%p)\n", link);
......@@ -952,11 +953,6 @@ static void smc91c92_config(dev_link_t *link)
else
printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n");
if (register_netdev(dev) != 0) {
printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
goto config_undo;
}
switch (smc->manfid) {
case MANFID_OSITECH:
case MANFID_PSION:
......@@ -977,8 +973,6 @@ static void smc91c92_config(dev_link_t *link)
goto config_undo;
}
strcpy(smc->node.dev_name, dev->name);
link->dev = &smc->node;
smc->duplex = 0;
smc->rx_ovrn = 0;
......@@ -993,25 +987,16 @@ static void smc91c92_config(dev_link_t *link)
case 8: name = "100-FD"; break;
case 9: name = "110"; break;
}
printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
"hw_addr ", dev->name, name, (rev & 0x0f), dev->base_addr,
dev->irq);
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
ioaddr = dev->base_addr;
if (rev > 0) {
u_long mir, mcr;
u_long mcr;
SMC_SELECT_BANK(0);
mir = inw(ioaddr + MEMINFO) & 0xff;
if (mir == 0xff) mir++;
/* Get scale factor for memory size */
mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
mir *= 128 * (1<<((mcr >> 9) & 7));
if (mir & 0x3ff)
printk(KERN_INFO " %lu byte", mir);
else
printk(KERN_INFO " %lu kb", mir>>10);
SMC_SELECT_BANK(1);
smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
......@@ -1019,9 +1004,8 @@ static void smc91c92_config(dev_link_t *link)
smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
if ((rev >> 4) >= 7)
smc->cfg |= CFG_MII_SELECT;
printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
"MII" : if_names[dev->if_port]);
}
} else
mir = 0;
if (smc->cfg & CFG_MII_SELECT) {
SMC_SELECT_BANK(3);
......@@ -1031,16 +1015,45 @@ static void smc91c92_config(dev_link_t *link)
if ((j != 0) && (j != 0xffff)) break;
}
smc->mii_if.phy_id = (i < 32) ? i : -1;
if (i < 32) {
DEBUG(0, " MII transceiver at index %d, status %x.\n", i, j);
} else {
printk(KERN_NOTICE " No MII transceivers found!\n");
}
SMC_SELECT_BANK(0);
}
link->dev = &smc->node;
link->state &= ~DEV_CONFIG_PENDING;
if (register_netdev(dev) != 0) {
printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
link->dev = NULL;
goto config_undo;
}
strcpy(smc->node.dev_name, dev->name);
printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
"hw_addr ", dev->name, name, (rev & 0x0f), dev->base_addr,
dev->irq);
for (i = 0; i < 6; i++)
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
if (rev > 0) {
if (mir & 0x3ff)
printk(KERN_INFO " %lu byte", mir);
else
printk(KERN_INFO " %lu kb", mir>>10);
printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
"MII" : if_names[dev->if_port]);
}
if (smc->cfg & CFG_MII_SELECT) {
if (smc->mii_if.phy_id != -1) {
DEBUG(0, " MII transceiver at index %d, status %x.\n",
smc->mii_if.phy_id, j);
} else {
printk(KERN_NOTICE " No MII transceivers found!\n");
}
}
return;
config_undo:
......
drivers/net/pcmcia/xirc2ps_cs.c
View file @ 63d5381e
......@@ -1114,17 +1114,20 @@ xirc2ps_config(dev_link_t * link)
/* we can now register the device with the net subsystem */
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
if (local->dingo)
do_reset(dev, 1); /* a kludge to make the cem56 work */
link->dev = &local->node;
link->state &= ~DEV_CONFIG_PENDING;
if ((err=register_netdev(dev))) {
printk(KNOT_XIRC "register_netdev() failed\n");
link->dev = NULL;
goto config_error;
}
strcpy(local->node.dev_name, dev->name);
link->dev = &local->node;
link->state &= ~DEV_CONFIG_PENDING;
if (local->dingo)
do_reset(dev, 1); /* a kludge to make the cem56 work */
/* give some infos about the hardware */
printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr",
......
drivers/net/tulip/tulip_core.c
View file @ 63d5381e
......@@ -1761,11 +1761,11 @@ static void __devexit tulip_remove_one (struct pci_dev *pdev)
return;
tp = netdev_priv(dev);
unregister_netdev(dev);
pci_free_consistent (pdev,
sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
tp->rx_ring, tp->rx_ring_dma);
unregister_netdev (dev);
if (tp->mtable)
kfree (tp->mtable);
#ifndef USE_IO_OPS
......
drivers/net/wireless/atmel.c
View file @ 63d5381e
......@@ -3,7 +3,7 @@
Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
Copyright 2000-2001 ATMEL Corporation.
Copyright 2003 Simon Kelley.
Copyright 2003-2004 Simon Kelley.
This code was developed from version 2.1.1 of the Atmel drivers,
released by Atmel corp. under the GPL in December 2002. It also
......@@ -47,6 +47,7 @@
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/timer.h>
#include <asm/io.h>
#include <asm/system.h>
......@@ -70,7 +71,7 @@
#include "ieee802_11.h"
#define DRIVER_MAJOR 0
#define DRIVER_MINOR 91
#define DRIVER_MINOR 96
MODULE_AUTHOR("Simon Kelley");
MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
......@@ -519,7 +520,6 @@ struct atmel_private {
} host_info;
enum {
STATION_STATE_INITIALIZING,
STATION_STATE_SCANNING,
STATION_STATE_JOINNING,
STATION_STATE_AUTHENTICATING,
......@@ -527,7 +527,6 @@ struct atmel_private {
STATION_STATE_READY,
STATION_STATE_REASSOCIATING,
STATION_STATE_DOWN,
STATION_STATE_NO_CARD,
STATION_STATE_MGMT_ERROR
} station_state;
......@@ -535,7 +534,7 @@ struct atmel_private {
time_t last_qual;
int beacons_this_sec;
int channel;
int reg_domain;
int reg_domain, config_reg_domain;
int tx_rate;
int auto_tx_rate;
int rts_threshold;
......@@ -578,6 +577,19 @@ struct atmel_private {
static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16};
static const struct {
int reg_domain;
int min, max;
char *name;
} channel_table[] = { { REG_DOMAIN_FCC, 1, 11, "USA" },
{ REG_DOMAIN_DOC, 1, 11, "Canada" },
{ REG_DOMAIN_ETSI, 1, 13, "Europe" },
{ REG_DOMAIN_SPAIN, 10, 11, "Spain" },
{ REG_DOMAIN_FRANCE, 10, 13, "France" },
{ REG_DOMAIN_MKK, 14, 14, "MKK" },
{ REG_DOMAIN_MKK1, 1, 14, "MKK1" },
{ REG_DOMAIN_ISRAEL, 3, 9, "Israel"} };
static void build_wpa_mib(struct atmel_private *priv);
static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len);
......@@ -606,8 +618,9 @@ static void atmel_join_bss(struct atmel_private *priv, int bss_index);
static void atmel_smooth_qual(struct atmel_private *priv);
static void atmel_writeAR(struct net_device *dev, u16 data);
static int probe_atmel_card(struct net_device *dev);
int reset_atmel_card(struct net_device *dev );
static int reset_atmel_card(struct net_device *dev );
static void atmel_enter_state(struct atmel_private *priv, int new_state);
int atmel_open (struct net_device *dev);
static inline u16 atmel_hi(struct atmel_private *priv, u16 offset)
{
......@@ -649,7 +662,6 @@ static inline void atmel_write16(struct net_device *dev, u16 offset, u16 data)
outw(data, dev->base_addr + offset);
}
static inline u8 atmel_rmem8(struct atmel_private *priv, u16 pos)
{
atmel_writeAR(priv->dev, pos);
......@@ -802,14 +814,14 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev)
u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
if (priv->station_state != STATION_STATE_READY) {
if (priv->card && priv->present_callback &&
!(*priv->present_callback)(priv->card)) {
priv->stats.tx_errors++;
dev_kfree_skb(skb);
return 0;
}
if (priv->card && priv->present_callback &&
!(*priv->present_callback)(priv->card)) {
if (priv->station_state != STATION_STATE_READY) {
priv->stats.tx_errors++;
dev_kfree_skb(skb);
return 0;
......@@ -1153,82 +1165,112 @@ static void rx_done_irq(struct atmel_private *priv)
}
}
static void reset_irq_status(struct atmel_private *priv, u8 mask)
{
u8 isr;
atmel_lock_mac(priv);
isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
isr ^= mask;
atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr);
atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
}
static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_id;
struct atmel_private *priv = netdev_priv(dev);
u8 isr;
int i = -1;
static u8 irq_order[] = {
ISR_OUT_OF_RANGE,
ISR_RxCOMPLETE,
ISR_TxCOMPLETE,
ISR_RxFRAMELOST,
ISR_FATAL_ERROR,
ISR_COMMAND_COMPLETE,
ISR_IBSS_MERGE,
ISR_GENERIC_IRQ
};
if (priv->card && priv->present_callback &&
!(*priv->present_callback)(priv->card))
return IRQ_HANDLED;
/* In this state upper-level code assumes it can mess with
the card unhampered by interrupts which may change register state.
Note that even though the card shouldn't generate interrupts
the inturrupt line may be shared. This allows card setup
to go on without disabling interrupts for a long time. */
if (priv->station_state == STATION_STATE_DOWN)
return IRQ_NONE;
atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */
while (1) {
if (!atmel_lock_mac(priv)) {
printk(KERN_ALERT "%s: MAC gone away in ISR.\n", dev->name);
/* bad things - don't re-enable interrupts */
/* failed to contact card */
printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
return IRQ_HANDLED;
}
isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
if (isr)
if (!isr) {
atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */
return i == -1 ? IRQ_NONE : IRQ_HANDLED;
}
atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */
else
break; /* no pending irqs */
if (isr & ISR_OUT_OF_RANGE) {
reset_irq_status(priv, ISR_OUT_OF_RANGE);
if(priv->operating_mode == IW_MODE_INFRA &&
for (i = 0; i < sizeof(irq_order)/sizeof(u8); i++)
if (isr & irq_order[i])
break;
if (!atmel_lock_mac(priv)) {
/* failed to contact card */
printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
return IRQ_HANDLED;
}
isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
isr ^= irq_order[i];
atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr);
atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
switch (irq_order[i]) {
case ISR_OUT_OF_RANGE:
if (priv->operating_mode == IW_MODE_INFRA &&
priv->station_state == STATION_STATE_READY) {
priv->station_is_associated = 0;
atmel_scan(priv, 1);
}
} else if (isr & ISR_RxCOMPLETE) {
reset_irq_status(priv, ISR_RxCOMPLETE);
rx_done_irq(priv);
} else if (isr & ISR_TxCOMPLETE) {
reset_irq_status(priv, ISR_TxCOMPLETE);
tx_done_irq(priv);
} else if (isr & ISR_RxFRAMELOST) {
reset_irq_status(priv, ISR_RxFRAMELOST);
break;
case ISR_RxFRAMELOST:
priv->wstats.discard.misc++;
/* fall through */
case ISR_RxCOMPLETE:
rx_done_irq(priv);
} else if (isr & ISR_FATAL_ERROR) {
reset_irq_status(priv, ISR_FATAL_ERROR);
break;
case ISR_TxCOMPLETE:
tx_done_irq(priv);
break;
case ISR_FATAL_ERROR:
printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name);
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
} else if (isr & ISR_COMMAND_COMPLETE) {
reset_irq_status(priv, ISR_COMMAND_COMPLETE);
break;
case ISR_COMMAND_COMPLETE:
atmel_command_irq(priv);
} else if (isr & ISR_IBSS_MERGE) {
reset_irq_status(priv, ISR_IBSS_MERGE);
break;
case ISR_IBSS_MERGE:
atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
priv->CurrentBSSID, 6);
/* The WPA stuff cares about the current AP address */
if (priv->use_wpa)
build_wpa_mib(priv);
} else if (isr & ISR_GENERIC_IRQ) {
reset_irq_status(priv, ISR_GENERIC_IRQ);
break;
case ISR_GENERIC_IRQ:
printk(KERN_INFO "%s: Generic_irq recieved.\n", dev->name);
break;
}
}
atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */
return IRQ_HANDLED;
}
......@@ -1256,8 +1298,8 @@ static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev)
priv->wstats.qual.noise = 0;
priv->wstats.qual.updated = 7;
} else {
// Quality levels cannot be determined in ad-hoc mode,
// because we can 'hear' more that one remote station.
/* Quality levels cannot be determined in ad-hoc mode,
because we can 'hear' more that one remote station. */
priv->wstats.qual.qual = 0;
priv->wstats.qual.level = 0;
priv->wstats.qual.noise = 0;
......@@ -1281,18 +1323,62 @@ static int atmel_set_mac_address(struct net_device *dev, void *p)
struct sockaddr *addr = p;
memcpy (dev->dev_addr, addr->sa_data, dev->addr_len);
reset_atmel_card(dev);
return 0;
return atmel_open(dev);
}
static int atmel_open (struct net_device *dev)
EXPORT_SYMBOL(atmel_open);
int atmel_open (struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
priv->station_state = STATION_STATE_INITIALIZING;
if (!reset_atmel_card(dev)) {
int i, channel;
/* any scheduled timer is no longer needed and might screw things up.. */
del_timer_sync(&priv->management_timer);
/* Interrupts will not touch the card once in this state... */
priv->station_state = STATION_STATE_DOWN;
if (priv->new_SSID_size) {
memcpy(priv->SSID, priv->new_SSID, priv->new_SSID_size);
priv->SSID_size = priv->new_SSID_size;
priv->new_SSID_size = 0;
}
priv->BSS_list_entries = 0;
priv->AuthenticationRequestRetryCnt = 0;
priv->AssociationRequestRetryCnt = 0;
priv->ReAssociationRequestRetryCnt = 0;
priv->CurrentAuthentTransactionSeqNum = 0x0001;
priv->ExpectedAuthentTransactionSeqNum = 0x0002;
priv->site_survey_state = SITE_SURVEY_IDLE;
priv->station_is_associated = 0;
if (!reset_atmel_card(dev))
return -EAGAIN;
if (priv->config_reg_domain) {
priv->reg_domain = priv->config_reg_domain;
atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS, priv->reg_domain);
} else {
priv->reg_domain = atmel_get_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS);
for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
if (priv->reg_domain == channel_table[i].reg_domain)
break;
if (i == sizeof(channel_table)/sizeof(channel_table[0])) {
priv->reg_domain = REG_DOMAIN_MKK1;
printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name);
}
}
if ((channel = atmel_validate_channel(priv, priv->channel)))
priv->channel = channel;
/* this moves station_state on.... */
atmel_scan(priv, 1);
atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */
return 0;
}
......@@ -1300,19 +1386,34 @@ static int atmel_close (struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
netif_carrier_off(dev);
if (netif_running(dev))
netif_stop_queue(dev);
atmel_enter_state(priv, STATION_STATE_DOWN);
priv->station_state = STATION_STATE_DOWN;
if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(dev, GCR, 0x0060);
atmel_write16(dev, GCR, 0x0040);
return 0;
}
static int atmel_validate_channel(struct atmel_private *priv, int channel)
{
/* check that channel is OK, if so return zero,
else return suitable default channel */
int i;
for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
if (priv->reg_domain == channel_table[i].reg_domain) {
if (channel >= channel_table[i].min &&
channel <= channel_table[i].max)
return 0;
else
return channel_table[i].min;
}
return 0;
}
static int atmel_proc_output (char *buf, struct atmel_private *priv)
{
int i;
char *p = buf;
char *s, *r, *c;
......@@ -1338,17 +1439,12 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv)
default: c = "<unknown>";
}
switch (priv->reg_domain) {
case REG_DOMAIN_FCC: r = "USA"; break;
case REG_DOMAIN_DOC: r = "Canada"; break;
case REG_DOMAIN_ETSI: r = "Europe"; break;
case REG_DOMAIN_SPAIN: r = "Spain"; break;
case REG_DOMAIN_FRANCE: r = "France"; break;
case REG_DOMAIN_MKK: r = "Japan (MKK)"; break;
case REG_DOMAIN_MKK1: r = "Japan (MKK1)"; break;
case REG_DOMAIN_ISRAEL: r = "Israel"; break;
default: r = "<unknown>";
}
r = "<unknown>";
for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
if (priv->reg_domain == channel_table[i].reg_domain)
r = channel_table[i].name;
p += sprintf(p, "MAC memory type:\t%s\n", c);
p += sprintf(p, "Regulatory domain:\t%s\n", r);
p += sprintf(p, "Host CRC checking:\t%s\n",
......@@ -1358,14 +1454,12 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv)
}
switch(priv->station_state) {
case STATION_STATE_INITIALIZING: s = "Initialising"; break;
case STATION_STATE_SCANNING: s = "Scanning"; break;
case STATION_STATE_JOINNING: s = "Joining"; break;
case STATION_STATE_AUTHENTICATING: s = "Authenticating"; break;
case STATION_STATE_ASSOCIATING: s = "Associating"; break;
case STATION_STATE_READY: s = "Ready"; break;
case STATION_STATE_REASSOCIATING: s = "Reassociating"; break;
case STATION_STATE_NO_CARD: s = "No card"; break;
case STATION_STATE_MGMT_ERROR: s = "Management error"; break;
case STATION_STATE_DOWN: s = "Down"; break;
default: s = "<unknown>";
......@@ -1441,6 +1535,8 @@ struct net_device *init_atmel_card( unsigned short irq, int port, char *firmware
priv->preamble = LONG_PREAMBLE;
priv->operating_mode = IW_MODE_INFRA;
priv->connect_to_any_BSS = 0;
priv->config_reg_domain = 0;
priv->reg_domain = 0;
priv->tx_rate = 3;
priv->auto_tx_rate = 1;
priv->channel = 4;
......@@ -1547,36 +1643,6 @@ void stop_atmel_card(struct net_device *dev, int freeres)
EXPORT_SYMBOL(stop_atmel_card);
static const struct {
int reg_domain;
int min, max;
} channel_table[] = { { REG_DOMAIN_FCC, 1, 11},
{ REG_DOMAIN_DOC, 1, 11},
{ REG_DOMAIN_ETSI, 1, 13},
{ REG_DOMAIN_SPAIN, 10, 11},
{ REG_DOMAIN_FRANCE, 10, 13},
{ REG_DOMAIN_MKK, 14, 14},
{ REG_DOMAIN_MKK1, 1, 14},
{ REG_DOMAIN_ISRAEL, 9} };
static int atmel_validate_channel(struct atmel_private *priv, int channel)
{
/* check that channel is OK, if so return zero,
else return suitable default channel */
int i;
for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
if (priv->reg_domain == channel_table[i].reg_domain) {
if (channel >= channel_table[i].min &&
channel <= channel_table[i].max)
return 0;
else
return channel_table[i].min;
}
return 1;
}
static int atmel_set_essid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *dwrq,
......@@ -1613,7 +1679,7 @@ static int atmel_get_essid(struct net_device *dev,
struct atmel_private *priv = netdev_priv(dev);
/* Get the current SSID */
if (priv->SSID_size == 0) {
if (priv->new_SSID_size != 0) {
memcpy(extra, priv->new_SSID, priv->new_SSID_size);
extra[priv->new_SSID_size] = '\0';
dwrq->length = priv->new_SSID_size + 1;
......@@ -2037,6 +2103,7 @@ static int atmel_set_scan(struct net_device *dev,
char *extra)
{
struct atmel_private *priv = netdev_priv(dev);
unsigned long flags;
/* Note : you may have realised that, as this is a SET operation,
* this is privileged and therefore a normal user can't
......@@ -2045,8 +2112,7 @@ static int atmel_set_scan(struct net_device *dev,
* traffic doesn't flow, so it's a perfect DoS...
* Jean II */
if (priv->station_state == STATION_STATE_DOWN ||
priv->station_state == STATION_STATE_NO_CARD)
if (priv->station_state == STATION_STATE_DOWN)
return -EAGAIN;
/* Timeout old surveys. */
......@@ -2058,13 +2124,13 @@ static int atmel_set_scan(struct net_device *dev,
if (priv->site_survey_state == SITE_SURVEY_IN_PROGRESS)
return -EBUSY;
priv->site_survey_state = SITE_SURVEY_IN_PROGRESS;
atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */
del_timer_sync(&priv->management_timer);
spin_lock_irqsave(&priv->irqlock, flags);
priv->site_survey_state = SITE_SURVEY_IN_PROGRESS;
priv->fast_scan = 0;
atmel_scan(priv, 0);
atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */
spin_unlock_irqrestore(&priv->irqlock, flags);
return 0;
}
......@@ -2116,7 +2182,7 @@ static int atmel_get_scan(struct net_device *dev,
/* Length of data */
dwrq->length = (current_ev - extra);
dwrq->flags = 0; /* todo */
dwrq->flags = 0;
return 0;
}
......@@ -2196,15 +2262,16 @@ static int atmel_set_wap(struct net_device *dev,
struct atmel_private *priv = netdev_priv(dev);
int i;
static const u8 bcast[] = { 255, 255, 255, 255, 255, 255 };
unsigned long flags;
if (awrq->sa_family != ARPHRD_ETHER)
return -EINVAL;
if (memcmp(bcast, awrq->sa_data, 6) == 0) {
atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */
del_timer_sync(&priv->management_timer);
spin_lock_irqsave(&priv->irqlock, flags);
atmel_scan(priv, 1);
atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */
spin_unlock_irqrestore(&priv->irqlock, flags);
return 0;
}
......@@ -2214,11 +2281,15 @@ static int atmel_set_wap(struct net_device *dev,
return -EINVAL;
} else if (priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) {
return -EINVAL;
} else
} else {
del_timer_sync(&priv->management_timer);
spin_lock_irqsave(&priv->irqlock, flags);
atmel_join_bss(priv, i);
spin_unlock_irqrestore(&priv->irqlock, flags);
return 0;
}
}
}
return -EINVAL;
}
......@@ -2228,8 +2299,7 @@ static int atmel_config_commit(struct net_device *dev,
void *zwrq, /* NULL */
char *extra) /* NULL */
{
reset_atmel_card(dev);
return 0;
return atmel_open(dev);
}
static const iw_handler atmel_handler[] =
......@@ -2297,12 +2367,15 @@ typedef struct atmel_priv_ioctl {
#define ATMELFWL SIOCIWFIRSTPRIV
#define ATMELIDIFC ATMELFWL + 1
#define ATMELRD ATMELFWL + 2
#define ATMELMAGIC 0x51807
#define REGDOMAINSZ 20
static const struct iw_priv_args atmel_private_args[] = {
/*{ cmd, set_args, get_args, name } */
{ ATMELFWL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (atmel_priv_ioctl), IW_PRIV_TYPE_NONE, "atmelfwl" },
{ ATMELIDIFC, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "atmelidifc" },
{ ATMELRD, IW_PRIV_TYPE_CHAR | REGDOMAINSZ, IW_PRIV_TYPE_NONE, "regdomain" },
};
static const struct iw_handler_def atmel_handler_def =
......@@ -2317,11 +2390,12 @@ static const struct iw_handler_def atmel_handler_def =
static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
int rc = 0;
int i, rc = 0;
struct atmel_private *priv = netdev_priv(dev);
atmel_priv_ioctl com;
struct iwreq *wrq = (struct iwreq *) rq;
unsigned char *new_firmware;
char domain[REGDOMAINSZ+1];
switch (cmd) {
case SIOCGIWPRIV:
......@@ -2371,6 +2445,39 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
priv->firmware_id[31] = '\0';
break;
case ATMELRD:
if (copy_from_user(domain, rq->ifr_data, REGDOMAINSZ)) {
rc = -EFAULT;
break;
}
if (!capable(CAP_NET_ADMIN)) {
rc = -EPERM;
break;
}
domain[REGDOMAINSZ] = 0;
rc = -EINVAL;
for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) {
/* strcasecmp doesn't exist in the library */
char *a = channel_table[i].name;
char *b = domain;
while (*a) {
char c1 = *a++;
char c2 = *b++;
if (tolower(c1) != tolower(c2))
break;
}
if (!*a && !*b) {
priv->config_reg_domain = channel_table[i].reg_domain;
rc = 0;
}
}
if (rc == 0 && priv->station_state != STATION_STATE_DOWN)
rc = atmel_open(dev);
break;
default:
rc = -EOPNOTSUPP;
}
......@@ -2394,6 +2501,8 @@ static void atmel_enter_state(struct atmel_private *priv, int new_state)
if (new_state == old_state)
return;
priv->station_state = new_state;
if (new_state == STATION_STATE_READY) {
netif_start_queue(priv->dev);
netif_carrier_on(priv->dev);
......@@ -2401,12 +2510,10 @@ static void atmel_enter_state(struct atmel_private *priv, int new_state)
if (old_state == STATION_STATE_READY) {
netif_carrier_off(priv->dev);
if (netif_running(priv->dev))
netif_stop_queue(priv->dev);
priv->last_beacon_timestamp = 0;
}
priv->station_state = new_state;
}
static void atmel_scan(struct atmel_private *priv, int specific_ssid)
......@@ -2423,8 +2530,6 @@ static void atmel_scan(struct atmel_private *priv, int specific_ssid)
u8 SSID_size;
} cmd;
atmel_enter_state(priv, STATION_STATE_SCANNING);
memset(cmd.BSSID, 0xff, 6);
if (priv->fast_scan) {
......@@ -2450,6 +2555,10 @@ static void atmel_scan(struct atmel_private *priv, int specific_ssid)
BSS_TYPE_AD_HOC : BSS_TYPE_INFRASTRUCTURE);
atmel_send_command(priv, CMD_Scan, &cmd, sizeof(cmd));
/* This must come after all hardware access to avoid being messed up
by stuff happening in interrupt context after we leave STATE_DOWN */
atmel_enter_state(priv, STATION_STATE_SCANNING);
}
static void join(struct atmel_private *priv, int type)
......@@ -3061,15 +3170,11 @@ static void atmel_management_timer(u_long a)
!(*priv->present_callback)(priv->card))
return;
if (priv->station_state == STATION_STATE_NO_CARD)
return;
spin_lock_irqsave(&priv->irqlock, flags);
switch (priv->station_state) {
case STATION_STATE_AUTHENTICATING:
if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) {
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
priv->station_is_associated = 0;
......@@ -3085,7 +3190,6 @@ static void atmel_management_timer(u_long a)
break;
case STATION_STATE_ASSOCIATING:
if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
priv->station_is_associated = 0;
......@@ -3100,7 +3204,6 @@ static void atmel_management_timer(u_long a)
break;
case STATION_STATE_REASSOCIATING:
if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
priv->station_is_associated = 0;
......@@ -3233,7 +3336,6 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
priv->station_state = STATION_STATE_NO_CARD;
return 0;
}
......@@ -3323,7 +3425,6 @@ static int probe_atmel_card(struct net_device *dev)
printk(KERN_ALERT "%s: MAC failed to boot MAC address reader.\n", dev->name);
} else {
atmel_copy_to_host(dev, dev->dev_addr, atmel_read16(dev, MR2), 6);
/* got address, now squash it again until the network
interface is opened */
if (priv->bus_type == BUS_TYPE_PCCARD)
......@@ -3469,7 +3570,7 @@ static void build_wpa_mib(struct atmel_private *priv)
atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
}
int reset_atmel_card(struct net_device *dev)
static int reset_atmel_card(struct net_device *dev)
{
/* do everything necessary to wake up the hardware, including
waiting for the lightning strike and throwing the knife switch....
......@@ -3485,7 +3586,6 @@ int reset_atmel_card(struct net_device *dev)
including a copy of the firmware's hostinfo stucture
which is the route into the rest of the firmare datastructures. */
int channel;
struct atmel_private *priv = netdev_priv(dev);
u8 configuration;
......@@ -3498,10 +3598,6 @@ int reset_atmel_card(struct net_device *dev)
NULL
};
if (priv->station_state == STATION_STATE_NO_CARD ||
priv->station_state == STATION_STATE_DOWN)
return 0;
/* reset pccard */
if (priv->bus_type == BUS_TYPE_PCCARD)
atmel_write16(priv->dev, GCR, 0x0060);
......@@ -3509,25 +3605,6 @@ int reset_atmel_card(struct net_device *dev)
/* stop card , disable interrupts */
atmel_write16(priv->dev, GCR, 0x0040);
/* any scheduled timer is no longer needed and might screw things up.. */
del_timer_sync(&priv->management_timer);
if (priv->new_SSID_size) {
memcpy(priv->SSID, priv->new_SSID, priv->new_SSID_size);
priv->SSID_size = priv->new_SSID_size;
priv->new_SSID_size = 0;
}
priv->BSS_list_entries = 0;
priv->AuthenticationRequestRetryCnt = 0;
priv->AssociationRequestRetryCnt = 0;
priv->ReAssociationRequestRetryCnt = 0;
priv->CurrentAuthentTransactionSeqNum = 0x0001;
priv->ExpectedAuthentTransactionSeqNum = 0x0002;
priv->station_state = STATION_STATE_INITIALIZING;
priv->site_survey_state = SITE_SURVEY_IDLE;
priv->station_is_associated = 0;
if (priv->card_type == CARD_TYPE_EEPROM) {
/* copy in firmware if needed */
const struct firmware *fw_entry = NULL;
......@@ -3629,21 +3706,6 @@ int reset_atmel_card(struct net_device *dev)
atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
configuration | FUNC_CTRL_RxENABLE);
priv->reg_domain = atmel_get_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS);
if (priv->reg_domain != REG_DOMAIN_FCC &&
priv->reg_domain != REG_DOMAIN_DOC &&
priv->reg_domain != REG_DOMAIN_ETSI &&
priv->reg_domain != REG_DOMAIN_SPAIN &&
priv->reg_domain != REG_DOMAIN_FRANCE &&
priv->reg_domain != REG_DOMAIN_MKK &&
priv->reg_domain != REG_DOMAIN_MKK1 &&
priv->reg_domain != REG_DOMAIN_ISRAEL) {
priv->reg_domain = REG_DOMAIN_MKK1;
printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name);
}
if ((channel = atmel_validate_channel(priv, priv->channel)))
priv->channel = channel;
if (!priv->radio_on_broken) {
if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
CMD_STATUS_REJECTED_RADIO_OFF) {
......@@ -3674,15 +3736,9 @@ int reset_atmel_card(struct net_device *dev)
else
build_wep_mib(priv);
atmel_scan(priv, 1);
atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */
return 1;
}
EXPORT_SYMBOL(reset_atmel_card);
static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size)
{
if (cmd)
......@@ -3699,15 +3755,16 @@ static int atmel_send_command_wait(struct atmel_private *priv, int command, void
atmel_send_command(priv, command, cmd, cmd_size);
for (i = LOOP_RETRY_LIMIT; i; i--) {
for (i = 5000; i; i--) {
status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
if (status != CMD_STATUS_IDLE &&
status != CMD_STATUS_IN_PROGRESS)
break;
udelay(20);
}
if (i == 0) {
printk(KERN_ALERT "%s: command %d failed to complete.\n", priv->dev->name, command);
printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name);
status = CMD_STATUS_HOST_ERROR;
} else {
if (command != CMD_EnableRadio)
......@@ -3835,9 +3892,13 @@ static void atmel_clear_gcr(struct net_device *dev, u16 mask)
static int atmel_lock_mac(struct atmel_private *priv)
{
int i, j = 100;
int i, j = 20;
retry:
for (i = LOOP_RETRY_LIMIT ; atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET)) && i ; i--);
for (i = 5000; i; i--) {
if (!atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET)))
break;
udelay(20);
}
if (!i) return 0; /* timed out */
......
drivers/net/wireless/atmel_cs.c
View file @ 63d5381e
......@@ -54,7 +54,6 @@
#include <asm/io.h>
#include <asm/system.h>
#include <linux/wireless.h>
#include <linux/802_11.h>
/*
......@@ -104,7 +103,7 @@ MODULE_PARM(irq_list, "1-4i");
struct net_device *init_atmel_card(int, int, char *, struct device *,
int (*present_func)(void *), void * );
void stop_atmel_card( struct net_device *, int );
int reset_atmel_card( struct net_device * );
int atmel_open( struct net_device * );
static void atmel_config(dev_link_t *link);
static void atmel_release(dev_link_t *link);
......@@ -335,7 +334,7 @@ static struct {
{ 0, 0, "ATMEL/AT76C504A", "atmel_at76c504a_2958%s.bin", "NoName-504a-2958" },
{ 0, 0, "ATMEL/AT76C504_R", "atmel_at76c504_2958%s.bin", "NoName-504-2958" },
{ MANFID_3COM, 0x0620, NULL, "atmel_at76c502_3com%s.bin", "3com 3CRWE62092B" },
{ MANFID_3COM, 0x0696, NULL, "atmel_at76c502_3com%s.bin", "3com 3CRSHPW_96" },
{ MANFID_3COM, 0x0696, NULL, "atmel_at76c502_3com%s.bin", "3com 3CRSHPW196" },
{ 0, 0, "SMC/2632W-V2", "atmel_at76c502%s.bin", "SMC 2632W-V2" },
{ 0, 0, "SMC/2632W", "atmel_at76c502d%s.bin", "SMC 2632W-V3" },
{ 0xd601, 0x0007, NULL, "atmel_at76c502%s.bin", "Sitecom WLAN-011" },
......@@ -661,7 +660,7 @@ static int atmel_event(event_t event, int priority,
case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
pcmcia_request_configuration(link->handle, &link->conf);
reset_atmel_card(local->eth_dev);
atmel_open(local->eth_dev);
netif_device_attach(local->eth_dev);
}
break;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7