Commit 64741b70 authored by David Hardeman's avatar David Hardeman Committed by Mauro Carvalho Chehab

V4L/DVB (4880): budget-ci IR: decode rc5 device byte

Decode the RC5 device byte as well as the command byte. Introduce a
parameter to set the device events to listen for. Default to try
to auto-detect the proper device code, otherwise, listen to any
device as the old code did.
Based on Darren Salt's dvb-ir patchset.
Signed-off-by: default avatarDarren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: default avatarDavid Hardeman <david@hardeman.nu>
Signed-off-by: default avatarAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 2520fffd
......@@ -78,6 +78,9 @@
*/
#define IR_REPEAT_TIMEOUT 350
/* RC5 device wildcard */
#define IR_DEVICE_ANY 255
/* Some remotes sends multiple sequences per keypress (e.g. Zenith sends two),
* this setting allows the superflous sequences to be ignored
*/
......@@ -85,12 +88,17 @@ static int debounce = 0;
module_param(debounce, int, 0644);
MODULE_PARM_DESC(debounce, "ignore repeated IR sequences (default: 0 = ignore no sequences)");
static int rc5_device = -1;
module_param(rc5_device, int, 0644);
MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
struct budget_ci_ir {
struct input_dev *dev;
struct tasklet_struct msp430_irq_tasklet;
char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
char phys[32];
struct ir_input_state state;
int rc5_device;
};
struct budget_ci {
......@@ -114,32 +122,56 @@ static void msp430_ir_interrupt(unsigned long data)
struct budget_ci *budget_ci = (struct budget_ci *) data;
struct input_dev *dev = budget_ci->ir.dev;
static int bounces = 0;
u32 ir_key;
int device;
int toggle;
static int prev_toggle = -1;
static u32 ir_key;
u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
/*
* The msp430 chip can generate two different bytes, command and device
*
* type1: X1CCCCCC, C = command bits (0 - 63)
* type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
*
* More than one command byte may be generated before the device byte
* Only when we have both, a correct keypress is generated
*/
/* Is this a RC5 command byte? */
if (command & 0x40) {
ir_key = command & 0x3f;
return;
}
if (ir_key != dev->repeat_key && del_timer(&dev->timer))
/* We were still waiting for a keyup event but this is a new key */
/* It's a RC5 device byte */
device = command & 0x1f;
toggle = command & 0x20;
if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && budget_ci->ir.rc5_device != device)
return;
/* Are we still waiting for a keyup event while this is a new key? */
if ((ir_key != dev->repeat_key || toggle != prev_toggle) && del_timer(&dev->timer))
ir_input_nokey(dev, &budget_ci->ir.state);
if (ir_key == dev->repeat_key && bounces > 0 && timer_pending(&dev->timer)) {
prev_toggle = toggle;
/* Ignore repeated key sequences if requested */
if (ir_key == dev->repeat_key && bounces > 0 && timer_pending(&dev->timer)) {
bounces--;
return;
}
/* New keypress? */
if (!timer_pending(&dev->timer))
/* New keypress */
bounces = debounce;
/* Prepare a keyup event sometime in the future */
mod_timer(&dev->timer, jiffies + msecs_to_jiffies(IR_REPEAT_TIMEOUT));
/* Generate a new or repeated keypress */
ir_input_keydown(dev, &budget_ci->ir.state, ir_key, command);
}
ir_input_keydown(dev, &budget_ci->ir.state, ir_key, ((device << 8) | command));
}
static void msp430_ir_debounce(unsigned long data)
......@@ -228,7 +260,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
input_dev->dev = &saa->pci->dev;
# endif
/* Select keymap */
/* Select keymap and address */
switch (budget_ci->budget.dev->pci->subsystem_device) {
case 0x100c:
case 0x100f:
......@@ -239,11 +271,21 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
/* The hauppauge keymap is a superset of these remotes */
ir_input_init(input_dev, &budget_ci->ir.state,
IR_TYPE_RC5, ir_codes_hauppauge_new);
if (rc5_device < 0)
budget_ci->ir.rc5_device = 0x1f;
else
budget_ci->ir.rc5_device = rc5_device;
break;
default:
/* unknown remote */
ir_input_init(input_dev, &budget_ci->ir.state,
IR_TYPE_RC5, ir_codes_budget_ci_old);
if (rc5_device < 0)
budget_ci->ir.rc5_device = IR_DEVICE_ANY;
else
budget_ci->ir.rc5_device = rc5_device;
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment