ARM: at91: dt: add device tree files for SAMA5D3 family

Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and
SAMA5D35).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/Makefile

@@ -31,6 +31,11 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
+# sama5d3
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
+dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb

arch/arm/boot/dts/sama5d3.dtsi

+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel SAMA5D3 family SoC";
+	compatible = "atmel,sama5d3", "atmel,sama5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a5";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mmc0: mmc@f0000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0000000 0x600>;
+				interrupts = <21 4 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			spi0: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9x5-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <24 4 3>;
+				cs-gpios = <&pioD 13 0
+					    &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
+					    &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
+					    &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
+					   >;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <38 4 4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f0010000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf0010000 0x100>;
+				interrupts = <26 4 0>;
+			};
+
+			i2c0: i2c@f0014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0014000 0x4000>;
+				interrupts = <18 4 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f0018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0018000 0x4000>;
+				interrupts = <19 4 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@f001c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf001c000 0x100>;
+				interrupts = <12 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				status = "disabled";
+			};
+
+			usart1: serial@f0020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0020000 0x100>;
+				interrupts = <13 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "cnds,pc302-gem", "cdns,gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				status = "disabled";
+			};
+
+			isi: isi@f0034000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0034000 0x4000>;
+				interrupts = <37 4 5>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <22 4 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 4 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			spi1: spi@f8008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9x5-spi";
+				reg = <0xf8008000 0x100>;
+				interrupts = <25 4 3>;
+				cs-gpios = <&pioC 25 0
+					    &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
+					    &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
+					    &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
+					   >;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@f800c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf800c000 0x4000>;
+				interrupts = <39 4 4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+			};
+
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 4 0>;
+			};
+
+			adc0: adc@f8018000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xf8018000 0x100>;
+				interrupts = <29 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					&pinctrl_adc0_ad10
+					&pinctrl_adc0_ad11
+					>;
+				atmel,adc-channel-base = <0x50>;
+				atmel,adc-channels-used = <0xfff>;
+				atmel,adc-drdy-mask = <0x1000000>;
+				atmel,adc-num-channels = <12>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-status-register = <0x30>;
+				atmel,adc-trigger-register = <0xc0>;
+				atmel,adc-use-external;
+				atmel,adc-vref = <3000>;
+				atmel,adc-res = <10 12>;
+				atmel,adc-res-names = "lowres", "highres";
+				status = "disabled";
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			tsadcc: tsadcc@f8018000 {
+				compatible = "atmel,at91sam9x5-tsadcc";
+				reg = <0xf8018000 0x4000>;
+				interrupts = <29 4 5>;
+				atmel,tsadcc_clock = <300000>;
+				atmel,filtering_average = <0x03>;
+				atmel,pendet_debounce = <0x08>;
+				atmel,pendet_sensitivity = <0x02>;
+				atmel,ts_sample_hold_time = <0x0a>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f801c000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <20 4 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart2: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				interrupts = <14 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				status = "disabled";
+			};
+
+			usart3: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				interrupts = <15 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				status = "disabled";
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				status = "disabled";
+			};
+
+			sha@f8034000 {
+				compatible = "atmel,sam9g46-sha";
+				reg = <0xf8034000 0x100>;
+				interrupts = <42 4 0>;
+			};
+
+			aes@f8038000 {
+				compatible = "atmel,sam9g46-aes";
+				reg = <0xf8038000 0x100>;
+				interrupts = <43 4 0>;
+			};
+
+			tdes@f803c000 {
+				compatible = "atmel,sam9g46-tdes";
+				reg = <0xf803c000 0x100>;
+				interrupts = <44 4 0>;
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <30 4 0>;
+				#dma-cells = <1>;
+			};
+
+			dma1: dma-controller@ffffe800 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe800 0x200>;
+				interrupts = <31 4 0>;
+				#dma-cells = <1>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <2 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d3-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <47>;
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
+					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
+					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
+					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
+					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
+					>;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<3 19 0x1 0x0>;	/* PD19 periph A ADTRG */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<3 20 0x1 0x0>;	/* PD20 periph A AD0 */
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<3 21 0x1 0x0>;	/* PD21 periph A AD1 */
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<3 22 0x1 0x0>;	/* PD22 periph A AD2 */
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<3 23 0x1 0x0>;	/* PD23 periph A AD3 */
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<3 24 0x1 0x0>;	/* PD24 periph A AD4 */
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins =
+							<3 25 0x1 0x0>;	/* PD25 periph A AD5 */
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins =
+							<3 26 0x1 0x0>;	/* PD26 periph A AD6 */
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins =
+							<3 27 0x1 0x0>;	/* PD27 periph A AD7 */
+					};
+					pinctrl_adc0_ad8: adc0_ad8 {
+						atmel,pins =
+							<3 28 0x1 0x0>;	/* PD28 periph A AD8 */
+					};
+					pinctrl_adc0_ad9: adc0_ad9 {
+						atmel,pins =
+							<3 29 0x1 0x0>;	/* PD29 periph A AD9 */
+					};
+					pinctrl_adc0_ad10: adc0_ad10 {
+						atmel,pins =
+							<3 30 0x1 0x0>;	/* PD30 periph A AD10, conflicts with PCK0 */
+					};
+					pinctrl_adc0_ad11: adc0_ad11 {
+						atmel,pins =
+							<3 31 0x1 0x0>;	/* PD31 periph A AD11, conflicts with PCK1 */
+					};
+				};
+
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<3 14 0x3 0x0	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 3 15 0x3 0x0>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<1 14 0x2 0x0	/* PB14 periph B RX, conflicts with GCRS */
+							 1 15 0x2 0x0>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<1 30 0x1 0x0	/* PB30 periph A */
+							 1 31 0x1 0x1>;	/* PB31 periph A with pullup */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<0 30 0x1 0x0	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+							 0 31 0x1 0x0>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<2 26 0x2 0x0	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+							 2 27 0x2 0x0>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+					};
+				};
+
+				isi {
+					pinctrl_isi: isi-0 {
+						atmel,pins =
+							<0 16 0x3 0x0	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+							 0 17 0x3 0x0	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+							 0 18 0x3 0x0	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+							 0 19 0x3 0x0	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+							 0 20 0x3 0x0	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+							 0 21 0x3 0x0	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+							 0 22 0x3 0x0	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+							 0 23 0x3 0x0	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+							 2 30 0x3 0x0	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+							 0 31 0x3 0x0	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+							 0 30 0x3 0x0	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+							 2 29 0x3 0x0	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 2 28 0x3 0x0>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+					};
+					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
+						atmel,pins =
+							<3 31 0x2 0x0>;	/* PD31 periph B ISI_MCK */
+					};
+				};
+
+				lcd {
+					pinctrl_lcd: lcd-0 {
+						atmel,pins =
+							<0 24 0x1 0x0	/* PA24 periph A LCDPWM */
+							 0 26 0x1 0x0	/* PA26 periph A LCDVSYNC */
+							 0 27 0x1 0x0	/* PA27 periph A LCDHSYNC */
+							 0 25 0x1 0x0	/* PA25 periph A LCDDISP */
+							 0 29 0x1 0x0	/* PA29 periph A LCDDEN */
+							 0 28 0x1 0x0	/* PA28 periph A LCDPCK */
+							 0 0 0x1 0x0	/* PA0 periph A LCDD0 pin */
+							 0 1 0x1 0x0	/* PA1 periph A LCDD1 pin */
+							 0 2 0x1 0x0	/* PA2 periph A LCDD2 pin */
+							 0 3 0x1 0x0	/* PA3 periph A LCDD3 pin */
+							 0 4 0x1 0x0	/* PA4 periph A LCDD4 pin */
+							 0 5 0x1 0x0	/* PA5 periph A LCDD5 pin */
+							 0 6 0x1 0x0	/* PA6 periph A LCDD6 pin */
+							 0 7 0x1 0x0	/* PA7 periph A LCDD7 pin */
+							 0 8 0x1 0x0	/* PA8 periph A LCDD8 pin */
+							 0 9 0x1 0x0	/* PA9 periph A LCDD9 pin */
+							 0 10 0x1 0x0	/* PA10 periph A LCDD10 pin */
+							 0 11 0x1 0x0	/* PA11 periph A LCDD11 pin */
+							 0 12 0x1 0x0	/* PA12 periph A LCDD12 pin */
+							 0 13 0x1 0x0	/* PA13 periph A LCDD13 pin */
+							 0 14 0x1 0x0	/* PA14 periph A LCDD14 pin */
+							 0 15 0x1 0x0	/* PA15 periph A LCDD15 pin */
+							 2 14 0x3 0x0	/* PC14 periph C LCDD16 pin */
+							 2 13 0x3 0x0	/* PC13 periph C LCDD17 pin */
+							 2 12 0x3 0x0	/* PC12 periph C LCDD18 pin */
+							 2 11 0x3 0x0	/* PC11 periph C LCDD19 pin */
+							 2 10 0x3 0x0	/* PC10 periph C LCDD20 pin */
+							 2 15 0x3 0x0	/* PC15 periph C LCDD21 pin */
+							 4 27 0x3 0x0	/* PE27 periph C LCDD22 pin */
+							 4 28 0x3 0x0>;	/* PE28 periph C LCDD23 pin */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<1 0 0x1 0x0	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 1 1 0x1 0x0	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 1 2 0x1 0x0	/* PB2 periph A GTX2, conflicts with TK1 */
+							 1 3 0x1 0x0	/* PB3 periph A GTX3, conflicts with TF1 */
+							 1 4 0x1 0x0	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 1 5 0x1 0x0	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 1 6 0x1 0x0	/* PB6 periph A GRX2, conflicts with TD1 */
+							 1 7 0x1 0x0>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<1 19 0x2 0x0	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 1 20 0x2 0x0	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 1 21 0x2 0x0	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 1 22 0x2 0x0	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 1 23 0x2 0x0	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 1 24 0x2 0x0	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 1 25 0x2 0x0	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 1 26 0x2 0x0>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<1 8 0x1 0x0	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 1 9 0x1 0x0	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 1 11 0x1 0x0	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 1 13 0x1 0x0	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 1 16 0x1 0x0	/* PB16 periph A GMDC */
+							 1 17 0x1 0x0	/* PB17 periph A GMDIO */
+							 1 18 0x1 0x0>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<1 9 0x1 0x0	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 1 10 0x1 0x0	/* PB10 periph A GTXER, conflicts with RF1 */
+							 1 11 0x1 0x0	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 1 12 0x1 0x0	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 1 13 0x1 0x0	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 1 14 0x1 0x0	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 1 15 0x1 0x0	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 1 16 0x1 0x0	/* PB16 periph A GMDC */
+							 1 17 0x1 0x0	/* PB17 periph A GMDIO */
+							 1 27 0x2 0x0>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<2 0 0x1 0x0	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 2 1 0x1 0x0	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 2 2 0x1 0x0	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 2 3 0x1 0x0	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 2 4 0x1 0x0	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 2 5 0x1 0x0	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 2 6 0x1 0x0	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 2 7 0x1 0x0	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 2 8 0x1 0x0	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 2 9 0x1 0x0>;	/* PC9 periph A EMDIO  */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<3 9 0x1 0x0	/* PD9 periph A MCI0_CK */
+							 3 0 0x1 0x1	/* PD0 periph A MCI0_CDA with pullup */
+							 3 1 0x1 0x1>;	/* PD1 periph A MCI0_DA0 with pullup */
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<3 2 0x1 0x1	/* PD2 periph A MCI0_DA1 with pullup */
+							 3 3 0x1 0x1	/* PD3 periph A MCI0_DA2 with pullup */
+							 3 4 0x1 0x1>;	/* PD4 periph A MCI0_DA3 with pullup */
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<3 5 0x1 0x1	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+							 3 6 0x1 0x1	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+							 3 7 0x1 0x1	/* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
+							 3 8 0x1 0x1>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<1 24 0x1 0x0	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
+							 1 19 0x1 0x1	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+							 1 20 0x1 0x1>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<1 21 0x1 0x1	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+							 1 22 0x1 0x1	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+							 1 23 0x1 0x1>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+					};
+				};
+
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<2 15 0x1 0x0	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 2 10 0x1 0x1	/* PC10 periph A MCI2_CDA with pullup */
+							 2 11 0x1 0x1>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<2 12 0x1 0x0	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 2 13 0x1 0x0	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 2 14 0x1 0x0>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+
+				nand0 {
+					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+						atmel,pins =
+							<4 21 0x1 0x1	/* PE21 periph A with pullup */
+							 4 22 0x1 0x1>;	/* PE22 periph A with pullup */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x100>;
+					interrupts = <6 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x100>;
+					interrupts = <7 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x100>;
+					interrupts = <8 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x100>;
+					interrupts = <9 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x100>;
+					interrupts = <10 4 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<3 10 0x1 0x0	/* PD10 periph A SPI0_MISO pin */
+							 3 11 0x1 0x0	/* PD11 periph A SPI0_MOSI pin */
+							 3 12 0x1 0x0	/* PD12 periph A SPI0_SPCK pin */
+							 3 13 0x0 0x0>;	/* PD13 GPIO SPI0_NPCS0 pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<2 22 0x1 0x0	/* PC22 periph A SPI1_MISO pin */
+							 2 23 0x1 0x0	/* PC23 periph A SPI1_MOSI pin */
+							 2 24 0x1 0x0	/* PC24 periph A SPI1_SPCK pin */
+							 2 25 0x0 0x0>;	/* PC25 GPIO SPI1_NPCS0 pin */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<2 16 0x1 0x0	/* PC16 periph A TK0 */
+							 2 17 0x1 0x0	/* PC17 periph A TF0 */
+							 2 18 0x1 0x0>;	/* PC18 periph A TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<2 19 0x1 0x0	/* PC19 periph A RK0 */
+							 2 20 0x1 0x0	/* PC20 periph A RF0 */
+							 2 21 0x1 0x0>;	/* PC21 periph A RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<1 2 0x2 0x0	/* PB2 periph B TK1, conflicts with GTX2 */
+							 1 3 0x2 0x0	/* PB3 periph B TF1, conflicts with GTX3 */
+							 1 6 0x2 0x0>;	/* PB6 periph B TD1, conflicts with TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<1 7 0x2 0x0	/* PB7 periph B RK1, conflicts with EREFCK */
+							 1 10 0x2 0x0	/* PB10 periph B RF1, conflicts with GTXER */
+							 1 11 0x2 0x0>;	/* PB11 periph B RD1, conflicts with GRXCK */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<2 29 0x1 0x0	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+							 2 30 0x1 0x1>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<0 30 0x2 0x0	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+							 0 31 0x2 0x1>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<3 17 0x1 0x0	/* PD17 periph A */
+							 3 18 0x1 0x1>;	/* PD18 periph A with pullup */
+					};
+
+					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+						atmel,pins =
+							<3 15 0x1 0x0	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+							 3 16 0x1 0x0>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<1 28 0x1 0x0	/* PB28 periph A */
+							 1 29 0x1 0x1>;	/* PB29 periph A with pullup */
+					};
+
+					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+						atmel,pins =
+							<1 26 0x1 0x0	/* PB26 periph A, conflicts with GRX7 */
+							 1 27 0x1 0x0>;	/* PB27 periph A, conflicts with G125CKO */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<4 25 0x2 0x0	/* PE25 periph B, conflicts with A25 */
+							 4 26 0x2 0x1>;	/* PE26 periph B with pullup, conflicts NCS0 */
+					};
+
+					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+						atmel,pins =
+							<4 23 0x2 0x0	/* PE23 periph B, conflicts with A23 */
+							 4 24 0x2 0x0>;	/* PE24 periph B, conflicts with A24 */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<4 18 0x2 0x0	/* PE18 periph B, conflicts with A18 */
+							 4 19 0x2 0x1>;	/* PE19 periph B with pullup, conflicts with A19 */
+					};
+
+					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+						atmel,pins =
+							<4 16 0x2 0x0	/* PE16 periph B, conflicts with A16 */
+							 4 17 0x2 0x0>;	/* PE17 periph B, conflicts with A17 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x120>;
+			};
+
+			rstc@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <3 4 5>;
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				status = "disabled";
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x30>;
+				interrupts = <1 4 7>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,at91sam9rl-udc";
+			reg = <0x00500000 0x100000
+			       0xf8030000 0x4000>;
+			interrupts = <33 4 2>;
+			status = "disabled";
+
+			ep0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep8 {
+				reg = <8>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep9 {
+				reg = <9>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep10 {
+				reg = <10>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep11 {
+				reg = <11>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep12 {
+				reg = <12>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep13 {
+				reg = <13>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep14 {
+				reg = <14>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+
+			ep15 {
+				reg = <15>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+			};
+		};
+
+		usb1: ohci@00600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <32 4 2>;
+			status = "disabled";
+		};
+
+		usb2: ehci@00700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <32 4 2>;
+			status = "disabled";
+		};
+
+		nand0: nand@60000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <	0x60000000 0x01000000	/* EBI CS3 */
+				0xffffc070 0x00000490	/* SMC PMECC regs */
+				0xffffc500 0x00000100	/* SMC PMECC Error Location regs */
+				0x00100000 0x00100000	/* ROM code */
+				0x70000000 0x10000000	/* NFC Command Registers */
+				0xffffc000 0x00000070	/* NFC HSMC regs */
+				0x00200000 0x00100000	/* NFC SRAM banks */
+				>;
+			interrupts = <5 4 6>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
+			atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/sama5d31ek.dts

+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D31-EK";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 0>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/sama5d33ek.dts

+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D33-EK";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/sama5d34ek.dts

+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D34-EK";
+	compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				24c256@50 {
+					compatible = "24c256";
+					reg = <0x50>;
+					pagesize = <64>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 0>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/sama5d35ek.dts

+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+
+/ {
+	model = "Atmel SAMA5D35-EK";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 0>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+};

arch/arm/boot/dts/sama5d3xcm.dtsi

+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "sama5d3.dtsi"
+
+/ {
+	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			atmel,has-nfc;
+			atmel,use-nfc-sram;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 1>;	/* PE25, conflicts with A25, RXD2 */
+		};
+	};
+};

arch/arm/boot/dts/sama5d3xdm.dtsi

+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <31 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				status = "disabled";
+			};
+
+			tsadcc: tsadcc@f8018000 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */
+					};
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/sama5d3xmb.dtsi

+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "sama5d3xcm.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 0>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wm8904";
+					reg = <0x1a>;
+				};
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 0>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<3 30 0x2 0x0>;	/* PD30 periph B */
+					};
+
+					pinctrl_isi_reset: isi_reset-0 {
+						atmel,pins =
+							<4 24 0x0 0x0>;   /* PE24 gpio */
+					};
+
+					pinctrl_isi_power: isi_power-0 {
+						atmel,pins =
+							<4 29 0x0 0x0>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioD 29 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioD 25 0
+					   &pioD 26 1
+					   &pioD 27 1
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,sama5d3ek-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};