Commit 664322a4 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (32 commits)
  Blackfin: ip0x: fix unused variable warning
  Blackfin: punt unused HDMA masks
  Blackfin: wire up new syscalls
  Blackfin/ipipe: restore pipeline bits in irqflags
  Blackfin/ipipe: fix deferred pipeline sync for the root stage
  Blackfin/ipipe: upgrade to I-pipe mainline
  Blackfin: cpufreq: fix typos
  Blackfin: enable GENERIC_HARDIRQS_NO_DEPRECATED
  Blackfin: SMP: convert to irq chip functions
  Blackfin: use accessor functions in show_interrupts()
  Blackfin: use proper wrapper functions for modifying irq status
  Blackfin: convert gpio irq_chip to new functions
  Blackfin: convert mac irq_chip to new functions
  Blackfin: convert error irq_chip to new functions
  Blackfin: convert internal irq_chip to new functions
  Blackfin: convert core irq_chip to new functions
  Blackfin: use proper wrappers for irq_desc
  Blackfin: optimize startup code
  Blackfin: SMP: work around anomaly 05000491
  Blackfin: SMP: implement cpu_freq support
  ...
parents 99759619 0c082bd1
...@@ -33,6 +33,7 @@ config BLACKFIN ...@@ -33,6 +33,7 @@ config BLACKFIN
select HAVE_GENERIC_HARDIRQS select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE select GENERIC_IRQ_PROBE
select IRQ_PER_CPU if SMP select IRQ_PER_CPU if SMP
select GENERIC_HARDIRQS_NO_DEPRECATED
config GENERIC_CSUM config GENERIC_CSUM
def_bool y def_bool y
...@@ -690,13 +691,13 @@ endmenu ...@@ -690,13 +691,13 @@ endmenu
menu "Blackfin Kernel Optimizations" menu "Blackfin Kernel Optimizations"
depends on !SMP
comment "Memory Optimizations" comment "Memory Optimizations"
config I_ENTRY_L1 config I_ENTRY_L1
bool "Locate interrupt entry code in L1 Memory" bool "Locate interrupt entry code in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -704,6 +705,7 @@ config I_ENTRY_L1 ...@@ -704,6 +705,7 @@ config I_ENTRY_L1
config EXCPT_IRQ_SYSC_L1 config EXCPT_IRQ_SYSC_L1
bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory" bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the entire ASM lowlevel exception and interrupt entry code If enabled, the entire ASM lowlevel exception and interrupt entry code
(STORE/RESTORE CONTEXT) is linked into L1 instruction memory. (STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
...@@ -712,6 +714,7 @@ config EXCPT_IRQ_SYSC_L1 ...@@ -712,6 +714,7 @@ config EXCPT_IRQ_SYSC_L1
config DO_IRQ_L1 config DO_IRQ_L1
bool "Locate frequently called do_irq dispatcher function in L1 Memory" bool "Locate frequently called do_irq dispatcher function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the frequently called do_irq dispatcher function is linked If enabled, the frequently called do_irq dispatcher function is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -719,6 +722,7 @@ config DO_IRQ_L1 ...@@ -719,6 +722,7 @@ config DO_IRQ_L1
config CORE_TIMER_IRQ_L1 config CORE_TIMER_IRQ_L1
bool "Locate frequently called timer_interrupt() function in L1 Memory" bool "Locate frequently called timer_interrupt() function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the frequently called timer_interrupt() function is linked If enabled, the frequently called timer_interrupt() function is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -726,6 +730,7 @@ config CORE_TIMER_IRQ_L1 ...@@ -726,6 +730,7 @@ config CORE_TIMER_IRQ_L1
config IDLE_L1 config IDLE_L1
bool "Locate frequently idle function in L1 Memory" bool "Locate frequently idle function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the frequently called idle function is linked If enabled, the frequently called idle function is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -733,6 +738,7 @@ config IDLE_L1 ...@@ -733,6 +738,7 @@ config IDLE_L1
config SCHEDULE_L1 config SCHEDULE_L1
bool "Locate kernel schedule function in L1 Memory" bool "Locate kernel schedule function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the frequently called kernel schedule is linked If enabled, the frequently called kernel schedule is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -740,6 +746,7 @@ config SCHEDULE_L1 ...@@ -740,6 +746,7 @@ config SCHEDULE_L1
config ARITHMETIC_OPS_L1 config ARITHMETIC_OPS_L1
bool "Locate kernel owned arithmetic functions in L1 Memory" bool "Locate kernel owned arithmetic functions in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, arithmetic functions are linked If enabled, arithmetic functions are linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -747,6 +754,7 @@ config ARITHMETIC_OPS_L1 ...@@ -747,6 +754,7 @@ config ARITHMETIC_OPS_L1
config ACCESS_OK_L1 config ACCESS_OK_L1
bool "Locate access_ok function in L1 Memory" bool "Locate access_ok function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the access_ok function is linked If enabled, the access_ok function is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -754,6 +762,7 @@ config ACCESS_OK_L1 ...@@ -754,6 +762,7 @@ config ACCESS_OK_L1
config MEMSET_L1 config MEMSET_L1
bool "Locate memset function in L1 Memory" bool "Locate memset function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the memset function is linked If enabled, the memset function is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -761,6 +770,7 @@ config MEMSET_L1 ...@@ -761,6 +770,7 @@ config MEMSET_L1
config MEMCPY_L1 config MEMCPY_L1
bool "Locate memcpy function in L1 Memory" bool "Locate memcpy function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the memcpy function is linked If enabled, the memcpy function is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -768,6 +778,7 @@ config MEMCPY_L1 ...@@ -768,6 +778,7 @@ config MEMCPY_L1
config STRCMP_L1 config STRCMP_L1
bool "locate strcmp function in L1 Memory" bool "locate strcmp function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the strcmp function is linked If enabled, the strcmp function is linked
into L1 instruction memory (less latency). into L1 instruction memory (less latency).
...@@ -775,6 +786,7 @@ config STRCMP_L1 ...@@ -775,6 +786,7 @@ config STRCMP_L1
config STRNCMP_L1 config STRNCMP_L1
bool "locate strncmp function in L1 Memory" bool "locate strncmp function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the strncmp function is linked If enabled, the strncmp function is linked
into L1 instruction memory (less latency). into L1 instruction memory (less latency).
...@@ -782,6 +794,7 @@ config STRNCMP_L1 ...@@ -782,6 +794,7 @@ config STRNCMP_L1
config STRCPY_L1 config STRCPY_L1
bool "locate strcpy function in L1 Memory" bool "locate strcpy function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the strcpy function is linked If enabled, the strcpy function is linked
into L1 instruction memory (less latency). into L1 instruction memory (less latency).
...@@ -789,6 +802,7 @@ config STRCPY_L1 ...@@ -789,6 +802,7 @@ config STRCPY_L1
config STRNCPY_L1 config STRNCPY_L1
bool "locate strncpy function in L1 Memory" bool "locate strncpy function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, the strncpy function is linked If enabled, the strncpy function is linked
into L1 instruction memory (less latency). into L1 instruction memory (less latency).
...@@ -796,6 +810,7 @@ config STRNCPY_L1 ...@@ -796,6 +810,7 @@ config STRNCPY_L1
config SYS_BFIN_SPINLOCK_L1 config SYS_BFIN_SPINLOCK_L1
bool "Locate sys_bfin_spinlock function in L1 Memory" bool "Locate sys_bfin_spinlock function in L1 Memory"
default y default y
depends on !SMP
help help
If enabled, sys_bfin_spinlock function is linked If enabled, sys_bfin_spinlock function is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -803,6 +818,7 @@ config SYS_BFIN_SPINLOCK_L1 ...@@ -803,6 +818,7 @@ config SYS_BFIN_SPINLOCK_L1
config IP_CHECKSUM_L1 config IP_CHECKSUM_L1
bool "Locate IP Checksum function in L1 Memory" bool "Locate IP Checksum function in L1 Memory"
default n default n
depends on !SMP
help help
If enabled, the IP Checksum function is linked If enabled, the IP Checksum function is linked
into L1 instruction memory. (less latency) into L1 instruction memory. (less latency)
...@@ -811,7 +827,7 @@ config CACHELINE_ALIGNED_L1 ...@@ -811,7 +827,7 @@ config CACHELINE_ALIGNED_L1
bool "Locate cacheline_aligned data to L1 Data Memory" bool "Locate cacheline_aligned data to L1 Data Memory"
default y if !BF54x default y if !BF54x
default n if BF54x default n if BF54x
depends on !BF531 depends on !SMP && !BF531
help help
If enabled, cacheline_aligned data is linked If enabled, cacheline_aligned data is linked
into L1 data memory. (less latency) into L1 data memory. (less latency)
...@@ -819,7 +835,7 @@ config CACHELINE_ALIGNED_L1 ...@@ -819,7 +835,7 @@ config CACHELINE_ALIGNED_L1
config SYSCALL_TAB_L1 config SYSCALL_TAB_L1
bool "Locate Syscall Table L1 Data Memory" bool "Locate Syscall Table L1 Data Memory"
default n default n
depends on !BF531 depends on !SMP && !BF531
help help
If enabled, the Syscall LUT is linked If enabled, the Syscall LUT is linked
into L1 data memory. (less latency) into L1 data memory. (less latency)
...@@ -827,16 +843,16 @@ config SYSCALL_TAB_L1 ...@@ -827,16 +843,16 @@ config SYSCALL_TAB_L1
config CPLB_SWITCH_TAB_L1 config CPLB_SWITCH_TAB_L1
bool "Locate CPLB Switch Tables L1 Data Memory" bool "Locate CPLB Switch Tables L1 Data Memory"
default n default n
depends on !BF531 depends on !SMP && !BF531
help help
If enabled, the CPLB Switch Tables are linked If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency) into L1 data memory. (less latency)
config CACHE_FLUSH_L1 config ICACHE_FLUSH_L1
bool "Locate cache flush funcs in L1 Inst Memory" bool "Locate icache flush funcs in L1 Inst Memory"
default y default y
help help
If enabled, the Blackfin cache flushing functions are linked If enabled, the Blackfin icache flushing functions are linked
into L1 instruction memory. into L1 instruction memory.
Note that this might be required to address anomalies, but Note that this might be required to address anomalies, but
...@@ -844,9 +860,18 @@ config CACHE_FLUSH_L1 ...@@ -844,9 +860,18 @@ config CACHE_FLUSH_L1
If you are using a processor affected by an anomaly, the build If you are using a processor affected by an anomaly, the build
system will double check for you and prevent it. system will double check for you and prevent it.
config DCACHE_FLUSH_L1
bool "Locate dcache flush funcs in L1 Inst Memory"
default y
depends on !SMP
help
If enabled, the Blackfin dcache flushing functions are linked
into L1 instruction memory.
config APP_STACK_L1 config APP_STACK_L1
bool "Support locating application stack in L1 Scratch Memory" bool "Support locating application stack in L1 Scratch Memory"
default y default y
depends on !SMP
help help
If enabled the application stack can be located in L1 If enabled the application stack can be located in L1
scratch memory (less latency). scratch memory (less latency).
...@@ -856,7 +881,7 @@ config APP_STACK_L1 ...@@ -856,7 +881,7 @@ config APP_STACK_L1
config EXCEPTION_L1_SCRATCH config EXCEPTION_L1_SCRATCH
bool "Locate exception stack in L1 Scratch Memory" bool "Locate exception stack in L1 Scratch Memory"
default n default n
depends on !APP_STACK_L1 depends on !SMP && !APP_STACK_L1
help help
Whenever an exception occurs, use the L1 Scratch memory for Whenever an exception occurs, use the L1 Scratch memory for
stack storage. You cannot place the stacks of FLAT binaries stack storage. You cannot place the stacks of FLAT binaries
...@@ -868,6 +893,7 @@ comment "Speed Optimizations" ...@@ -868,6 +893,7 @@ comment "Speed Optimizations"
config BFIN_INS_LOWOVERHEAD config BFIN_INS_LOWOVERHEAD
bool "ins[bwl] low overhead, higher interrupt latency" bool "ins[bwl] low overhead, higher interrupt latency"
default y default y
depends on !SMP
help help
Reads on the Blackfin are speculative. In Blackfin terms, this means Reads on the Blackfin are speculative. In Blackfin terms, this means
they can be interrupted at any time (even after they have been issued they can be interrupted at any time (even after they have been issued
......
...@@ -115,6 +115,7 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -115,6 +115,7 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=m CONFIG_CRC_CCITT=m
...@@ -153,6 +153,7 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -153,6 +153,7 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=m CONFIG_CRC_CCITT=m
...@@ -183,5 +183,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -183,5 +183,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -175,5 +175,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -175,5 +175,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -108,5 +108,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -108,5 +108,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -122,5 +122,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -122,5 +122,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -133,5 +133,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -133,5 +133,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -131,5 +131,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -131,5 +131,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -205,5 +205,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -205,5 +205,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -109,5 +109,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -109,5 +109,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -111,5 +111,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y ...@@ -111,5 +111,6 @@ CONFIG_DEBUG_DOUBLEFAULT=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y CONFIG_CPLB_INFO=y
CONFIG_BFIN_PSEUDODBG_INSNS=y
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set
...@@ -58,14 +58,26 @@ ...@@ -58,14 +58,26 @@
({ BUG(); 0; }); \ ({ BUG(); 0; }); \
}) })
#define bfin_write(addr, val) \ #define bfin_write(addr, val) \
({ \ do { \
switch (sizeof(*(addr))) { \ switch (sizeof(*(addr))) { \
case 1: bfin_write8(addr, val); break; \ case 1: bfin_write8(addr, val); break; \
case 2: bfin_write16(addr, val); break; \ case 2: bfin_write16(addr, val); break; \
case 4: bfin_write32(addr, val); break; \ case 4: bfin_write32(addr, val); break; \
default: BUG(); \ default: BUG(); \
} \ } \
}) } while (0)
#define bfin_write_or(addr, bits) \
do { \
void *__addr = (void *)(addr); \
bfin_write(__addr, bfin_read(__addr) | (bits)); \
} while (0)
#define bfin_write_and(addr, bits) \
do { \
void *__addr = (void *)(addr); \
bfin_write(__addr, bfin_read(__addr) & (bits)); \
} while (0)
#endif /* __ASSEMBLY__ */ #endif /* __ASSEMBLY__ */
......
...@@ -125,6 +125,9 @@ void unset_dram_srfs(void); ...@@ -125,6 +125,9 @@ void unset_dram_srfs(void);
#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16)) #define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
#ifdef CONFIG_CPU_FREQ
#define CPUFREQ_CPU 0
#endif
struct bfin_dpmc_platform_data { struct bfin_dpmc_platform_data {
const unsigned int *tuple_tab; const unsigned int *tuple_tab;
unsigned short tabsize; unsigned short tabsize;
......
...@@ -34,11 +34,12 @@ ...@@ -34,11 +34,12 @@
#include <asm/bitops.h> #include <asm/bitops.h>
#include <asm/atomic.h> #include <asm/atomic.h>
#include <asm/traps.h> #include <asm/traps.h>
#include <asm/bitsperlong.h>
#define IPIPE_ARCH_STRING "1.12-00" #define IPIPE_ARCH_STRING "1.16-01"
#define IPIPE_MAJOR_NUMBER 1 #define IPIPE_MAJOR_NUMBER 1
#define IPIPE_MINOR_NUMBER 12 #define IPIPE_MINOR_NUMBER 16
#define IPIPE_PATCH_NUMBER 0 #define IPIPE_PATCH_NUMBER 1
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
#error "I-pipe/blackfin: SMP not implemented" #error "I-pipe/blackfin: SMP not implemented"
...@@ -55,7 +56,6 @@ do { \ ...@@ -55,7 +56,6 @@ do { \
#define task_hijacked(p) \ #define task_hijacked(p) \
({ \ ({ \
int __x__ = __ipipe_root_domain_p; \ int __x__ = __ipipe_root_domain_p; \
__clear_bit(IPIPE_SYNC_FLAG, &ipipe_root_cpudom_var(status)); \
if (__x__) \ if (__x__) \
hard_local_irq_enable(); \ hard_local_irq_enable(); \
!__x__; \ !__x__; \
...@@ -64,16 +64,11 @@ do { \ ...@@ -64,16 +64,11 @@ do { \
struct ipipe_domain; struct ipipe_domain;
struct ipipe_sysinfo { struct ipipe_sysinfo {
int sys_nr_cpus; /* Number of CPUs on board */
int ncpus; /* Number of CPUs on board */ int sys_hrtimer_irq; /* hrtimer device IRQ */
u64 cpufreq; /* CPU frequency (in Hz) */ u64 sys_hrtimer_freq; /* hrtimer device frequency */
u64 sys_hrclock_freq; /* hrclock device frequency */
/* Arch-dependent block */ u64 sys_cpu_freq; /* CPU frequency (Hz) */
struct {
unsigned tmirq; /* Timer tick IRQ */
u64 tmfreq; /* Timer frequency */
} archdep;
}; };
#define ipipe_read_tsc(t) \ #define ipipe_read_tsc(t) \
...@@ -115,9 +110,19 @@ void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, ...@@ -115,9 +110,19 @@ void __ipipe_enable_irqdesc(struct ipipe_domain *ipd,
void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,
unsigned irq); unsigned irq);
#define __ipipe_enable_irq(irq) (irq_desc[irq].chip->unmask(irq)) #define __ipipe_enable_irq(irq) \
do { \
struct irq_desc *desc = irq_to_desc(irq); \
struct irq_chip *chip = get_irq_desc_chip(desc); \
chip->irq_unmask(&desc->irq_data); \
} while (0)
#define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq)) #define __ipipe_disable_irq(irq) \
do { \
struct irq_desc *desc = irq_to_desc(irq); \
struct irq_chip *chip = get_irq_desc_chip(desc); \
chip->irq_mask(&desc->irq_data); \
} while (0)
static inline int __ipipe_check_tickdev(const char *devname) static inline int __ipipe_check_tickdev(const char *devname)
{ {
...@@ -128,12 +133,11 @@ void __ipipe_enable_pipeline(void); ...@@ -128,12 +133,11 @@ void __ipipe_enable_pipeline(void);
#define __ipipe_hook_critical_ipi(ipd) do { } while (0) #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
#define __ipipe_sync_pipeline ___ipipe_sync_pipeline void ___ipipe_sync_pipeline(void);
void ___ipipe_sync_pipeline(unsigned long syncmask);
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs); void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
int __ipipe_get_irq_priority(unsigned irq); int __ipipe_get_irq_priority(unsigned int irq);
void __ipipe_serial_debug(const char *fmt, ...); void __ipipe_serial_debug(const char *fmt, ...);
...@@ -152,7 +156,10 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) ...@@ -152,7 +156,10 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
return ffs(ul) - 1; return ffs(ul) - 1;
} }
#define __ipipe_run_irqtail() /* Must be a macro */ \ #define __ipipe_do_root_xirq(ipd, irq) \
((ipd)->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)))
#define __ipipe_run_irqtail(irq) /* Must be a macro */ \
do { \ do { \
unsigned long __pending; \ unsigned long __pending; \
CSYNC(); \ CSYNC(); \
...@@ -164,42 +171,8 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) ...@@ -164,42 +171,8 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
} \ } \
} while (0) } while (0)
#define __ipipe_run_isr(ipd, irq) \
do { \
if (!__ipipe_pipeline_head_p(ipd)) \
hard_local_irq_enable(); \
if (ipd == ipipe_root_domain) { \
if (unlikely(ipipe_virtual_irq_p(irq))) { \
irq_enter(); \
ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
irq_exit(); \
} else \
ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
} else { \
__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
/* Attempt to exit the outer interrupt level before \
* starting the deferred IRQ processing. */ \
__ipipe_run_irqtail(); \
__set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
} \
hard_local_irq_disable(); \
} while (0)
#define __ipipe_syscall_watched_p(p, sc) \ #define __ipipe_syscall_watched_p(p, sc) \
(((p)->flags & PF_EVNOTIFY) || (unsigned long)sc >= NR_syscalls) (ipipe_notifier_enabled_p(p) || (unsigned long)sc >= NR_syscalls)
void ipipe_init_irq_threads(void);
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#ifdef CONFIG_TICKSOURCE_CORETMR
#define IRQ_SYSTMR IRQ_CORETMR
#define IRQ_PRIOTMR IRQ_CORETMR
#else
#define IRQ_SYSTMR IRQ_TIMER0
#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
#endif
#ifdef CONFIG_BF561 #ifdef CONFIG_BF561
#define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val) #define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val)
...@@ -219,11 +192,11 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); ...@@ -219,11 +192,11 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#define task_hijacked(p) 0 #define task_hijacked(p) 0
#define ipipe_trap_notify(t, r) 0 #define ipipe_trap_notify(t, r) 0
#define __ipipe_root_tick_p(regs) 1
#define ipipe_init_irq_threads() do { } while (0) #endif /* !CONFIG_IPIPE */
#define ipipe_start_irq_thread(irq, desc) 0
#ifndef CONFIG_TICKSOURCE_GPTMR0 #ifdef CONFIG_TICKSOURCE_CORETMR
#define IRQ_SYSTMR IRQ_CORETMR #define IRQ_SYSTMR IRQ_CORETMR
#define IRQ_PRIOTMR IRQ_CORETMR #define IRQ_PRIOTMR IRQ_CORETMR
#else #else
...@@ -231,10 +204,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); ...@@ -231,10 +204,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0 #define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
#endif #endif
#define __ipipe_root_tick_p(regs) 1
#endif /* !CONFIG_IPIPE */
#define ipipe_update_tick_evtdev(evtdev) do { } while (0) #define ipipe_update_tick_evtdev(evtdev) do { } while (0)
#endif /* !__ASM_BLACKFIN_IPIPE_H */ #endif /* !__ASM_BLACKFIN_IPIPE_H */
...@@ -24,8 +24,10 @@ ...@@ -24,8 +24,10 @@
#ifdef CONFIG_IPIPE #ifdef CONFIG_IPIPE
#include <asm/bitsperlong.h>
#include <mach/irq.h>
#define IPIPE_NR_XIRQS NR_IRQS #define IPIPE_NR_XIRQS NR_IRQS
#define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */
/* Blackfin-specific, per-cpu pipeline status */ /* Blackfin-specific, per-cpu pipeline status */
#define IPIPE_SYNCDEFER_FLAG 15 #define IPIPE_SYNCDEFER_FLAG 15
...@@ -42,11 +44,14 @@ ...@@ -42,11 +44,14 @@
#define IPIPE_EVENT_INIT (IPIPE_FIRST_EVENT + 4) #define IPIPE_EVENT_INIT (IPIPE_FIRST_EVENT + 4)
#define IPIPE_EVENT_EXIT (IPIPE_FIRST_EVENT + 5) #define IPIPE_EVENT_EXIT (IPIPE_FIRST_EVENT + 5)
#define IPIPE_EVENT_CLEANUP (IPIPE_FIRST_EVENT + 6) #define IPIPE_EVENT_CLEANUP (IPIPE_FIRST_EVENT + 6)
#define IPIPE_LAST_EVENT IPIPE_EVENT_CLEANUP #define IPIPE_EVENT_RETURN (IPIPE_FIRST_EVENT + 7)
#define IPIPE_LAST_EVENT IPIPE_EVENT_RETURN
#define IPIPE_NR_EVENTS (IPIPE_LAST_EVENT + 1) #define IPIPE_NR_EVENTS (IPIPE_LAST_EVENT + 1)
#define IPIPE_TIMER_IRQ IRQ_CORETMR #define IPIPE_TIMER_IRQ IRQ_CORETMR
#define __IPIPE_FEATURE_SYSINFO_V2 1
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
...@@ -63,6 +68,8 @@ void __ipipe_unlock_root(void); ...@@ -63,6 +68,8 @@ void __ipipe_unlock_root(void);
#endif /* !__ASSEMBLY__ */ #endif /* !__ASSEMBLY__ */
#define __IPIPE_FEATURE_SYSINFO_V2 1
#endif /* CONFIG_IPIPE */ #endif /* CONFIG_IPIPE */
#endif /* !__ASM_BLACKFIN_IPIPE_BASE_H */ #endif /* !__ASM_BLACKFIN_IPIPE_BASE_H */
...@@ -89,15 +89,33 @@ static inline void __hard_local_irq_restore(unsigned long flags) ...@@ -89,15 +89,33 @@ static inline void __hard_local_irq_restore(unsigned long flags)
#ifdef CONFIG_IPIPE #ifdef CONFIG_IPIPE
#include <linux/compiler.h> #include <linux/compiler.h>
#include <linux/ipipe_base.h>
#include <linux/ipipe_trace.h> #include <linux/ipipe_trace.h>
/*
* Way too many inter-deps between low-level headers in this port, so
* we redeclare the required bits we cannot pick from
* <asm/ipipe_base.h> to prevent circular dependencies.
*/
void __ipipe_stall_root(void);
void __ipipe_unstall_root(void);
unsigned long __ipipe_test_root(void);
unsigned long __ipipe_test_and_stall_root(void);
void __ipipe_restore_root(unsigned long flags);
#ifdef CONFIG_IPIPE_DEBUG_CONTEXT
struct ipipe_domain;
extern struct ipipe_domain ipipe_root;
void ipipe_check_context(struct ipipe_domain *ipd);
#define __check_irqop_context(ipd) ipipe_check_context(&ipipe_root)
#else /* !CONFIG_IPIPE_DEBUG_CONTEXT */
#define __check_irqop_context(ipd) do { } while (0)
#endif /* !CONFIG_IPIPE_DEBUG_CONTEXT */
/* /*
* Interrupt pipe interface to linux/irqflags.h. * Interrupt pipe interface to linux/irqflags.h.
*/ */
static inline void arch_local_irq_disable(void) static inline void arch_local_irq_disable(void)
{ {
ipipe_check_context(ipipe_root_domain); __check_irqop_context();
__ipipe_stall_root(); __ipipe_stall_root();
barrier(); barrier();
} }
...@@ -105,7 +123,7 @@ static inline void arch_local_irq_disable(void) ...@@ -105,7 +123,7 @@ static inline void arch_local_irq_disable(void)
static inline void arch_local_irq_enable(void) static inline void arch_local_irq_enable(void)
{ {
barrier(); barrier();
ipipe_check_context(ipipe_root_domain); __check_irqop_context();
__ipipe_unstall_root(); __ipipe_unstall_root();
} }
...@@ -119,16 +137,21 @@ static inline int arch_irqs_disabled_flags(unsigned long flags) ...@@ -119,16 +137,21 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
return flags == bfin_no_irqs; return flags == bfin_no_irqs;
} }
static inline void arch_local_irq_save_ptr(unsigned long *_flags) static inline unsigned long arch_local_irq_save(void)
{ {
x = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; unsigned long flags;
__check_irqop_context();
flags = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags;
barrier(); barrier();
return flags;
} }
static inline unsigned long arch_local_irq_save(void) static inline void arch_local_irq_restore(unsigned long flags)
{ {
ipipe_check_context(ipipe_root_domain); __check_irqop_context();
return __hard_local_irq_save(); __ipipe_restore_root(flags == bfin_no_irqs);
} }
static inline unsigned long arch_mangle_irq_bits(int virt, unsigned long real) static inline unsigned long arch_mangle_irq_bits(int virt, unsigned long real)
...@@ -192,7 +215,10 @@ static inline void hard_local_irq_restore(unsigned long flags) ...@@ -192,7 +215,10 @@ static inline void hard_local_irq_restore(unsigned long flags)
# define hard_local_irq_restore(flags) __hard_local_irq_restore(flags) # define hard_local_irq_restore(flags) __hard_local_irq_restore(flags)
#endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */ #endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */
#else /* CONFIG_IPIPE */ #define hard_local_irq_save_cond() hard_local_irq_save()
#define hard_local_irq_restore_cond(flags) hard_local_irq_restore(flags)
#else /* !CONFIG_IPIPE */
/* /*
* Direct interface to linux/irqflags.h. * Direct interface to linux/irqflags.h.
...@@ -212,7 +238,48 @@ static inline void hard_local_irq_restore(unsigned long flags) ...@@ -212,7 +238,48 @@ static inline void hard_local_irq_restore(unsigned long flags)
#define hard_local_irq_restore(flags) __hard_local_irq_restore(flags) #define hard_local_irq_restore(flags) __hard_local_irq_restore(flags)
#define hard_local_irq_enable() __hard_local_irq_enable() #define hard_local_irq_enable() __hard_local_irq_enable()
#define hard_local_irq_disable() __hard_local_irq_disable() #define hard_local_irq_disable() __hard_local_irq_disable()
#define hard_local_irq_save_cond() hard_local_save_flags()
#define hard_local_irq_restore_cond(flags) do { (void)(flags); } while (0)
#endif /* !CONFIG_IPIPE */ #endif /* !CONFIG_IPIPE */
#ifdef CONFIG_SMP
#define hard_local_irq_save_smp() hard_local_irq_save()
#define hard_local_irq_restore_smp(flags) hard_local_irq_restore(flags)
#else
#define hard_local_irq_save_smp() hard_local_save_flags()
#define hard_local_irq_restore_smp(flags) do { (void)(flags); } while (0)
#endif
/*
* Remap the arch-neutral IRQ state manipulation macros to the
* blackfin-specific hard_local_irq_* API.
*/
#define local_irq_save_hw(flags) \
do { \
(flags) = hard_local_irq_save(); \
} while (0)
#define local_irq_restore_hw(flags) \
do { \
hard_local_irq_restore(flags); \
} while (0)
#define local_irq_disable_hw() \
do { \
hard_local_irq_disable(); \
} while (0)
#define local_irq_enable_hw() \
do { \
hard_local_irq_enable(); \
} while (0)
#define local_irq_save_hw_notrace(flags) \
do { \
(flags) = __hard_local_irq_save(); \
} while (0)
#define local_irq_restore_hw_notrace(flags) \
do { \
__hard_local_irq_restore(flags); \
} while (0)
#define irqs_disabled_hw() hard_irqs_disabled()
#endif #endif
...@@ -17,7 +17,12 @@ ...@@ -17,7 +17,12 @@
#define raw_smp_processor_id() blackfin_core_id() #define raw_smp_processor_id() blackfin_core_id()
extern char coreb_trampoline_start, coreb_trampoline_end; extern void bfin_relocate_coreb_l1_mem(void);
#if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr);
extern unsigned long blackfin_iflush_l1_entry[NR_CPUS];
#endif
struct corelock_slot { struct corelock_slot {
int lock; int lock;
...@@ -34,7 +39,7 @@ extern unsigned long dcache_invld_count[NR_CPUS]; ...@@ -34,7 +39,7 @@ extern unsigned long dcache_invld_count[NR_CPUS];
void smp_icache_flush_range_others(unsigned long start, void smp_icache_flush_range_others(unsigned long start,
unsigned long end); unsigned long end);
#ifdef CONFIG_HOTPLUG_CPU #ifdef CONFIG_HOTPLUG_CPU
void coreb_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void coreb_die(void);
void cpu_die(void); void cpu_die(void);
void platform_cpu_die(void); void platform_cpu_die(void);
int __cpu_disable(void); int __cpu_disable(void);
......
...@@ -393,8 +393,11 @@ ...@@ -393,8 +393,11 @@
#define __NR_fanotify_mark 372 #define __NR_fanotify_mark 372
#define __NR_prlimit64 373 #define __NR_prlimit64 373
#define __NR_cacheflush 374 #define __NR_cacheflush 374
#define __NR_name_to_handle_at 375
#define __NR_open_by_handle_at 376
#define __NR_clock_adjtime 377
#define __NR_syscall 375 #define __NR_syscall 378
#define NR_syscalls __NR_syscall #define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */ /* Old optional stuff no one actually uses */
......
...@@ -84,6 +84,24 @@ static int __init proc_dma_init(void) ...@@ -84,6 +84,24 @@ static int __init proc_dma_init(void)
late_initcall(proc_dma_init); late_initcall(proc_dma_init);
#endif #endif
static void set_dma_peripheral_map(unsigned int channel, const char *device_id)
{
#ifdef CONFIG_BF54x
unsigned int per_map;
switch (channel) {
case CH_UART2_RX: per_map = 0xC << 12; break;
case CH_UART2_TX: per_map = 0xD << 12; break;
case CH_UART3_RX: per_map = 0xE << 12; break;
case CH_UART3_TX: per_map = 0xF << 12; break;
default: return;
}
if (strncmp(device_id, "BFIN_UART", 9) == 0)
dma_ch[channel].regs->peripheral_map = per_map;
#endif
}
/** /**
* request_dma - request a DMA channel * request_dma - request a DMA channel
* *
...@@ -111,19 +129,7 @@ int request_dma(unsigned int channel, const char *device_id) ...@@ -111,19 +129,7 @@ int request_dma(unsigned int channel, const char *device_id)
return -EBUSY; return -EBUSY;
} }
#ifdef CONFIG_BF54x set_dma_peripheral_map(channel, device_id);
if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
unsigned int per_map;
per_map = dma_ch[channel].regs->peripheral_map & 0xFFF;
if (strncmp(device_id, "BFIN_UART", 9) == 0)
dma_ch[channel].regs->peripheral_map = per_map |
((channel - CH_UART2_RX + 0xC)<<12);
else
dma_ch[channel].regs->peripheral_map = per_map |
((channel - CH_UART2_RX + 0x6)<<12);
}
#endif
dma_ch[channel].device_id = device_id; dma_ch[channel].device_id = device_id;
dma_ch[channel].irq = 0; dma_ch[channel].irq = 0;
......
...@@ -154,7 +154,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) ...@@ -154,7 +154,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
* pending for it. * pending for it.
*/ */
if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) && if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
ipipe_head_cpudom_var(irqpend_himask) == 0) !__ipipe_ipending_p(ipipe_head_cpudom_ptr()))
goto out; goto out;
__ipipe_walk_pipeline(head); __ipipe_walk_pipeline(head);
...@@ -185,25 +185,21 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq) ...@@ -185,25 +185,21 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
} }
EXPORT_SYMBOL(__ipipe_disable_irqdesc); EXPORT_SYMBOL(__ipipe_disable_irqdesc);
int __ipipe_syscall_root(struct pt_regs *regs) asmlinkage int __ipipe_syscall_root(struct pt_regs *regs)
{ {
struct ipipe_percpu_domain_data *p; struct ipipe_percpu_domain_data *p;
unsigned long flags; void (*hook)(void);
int ret; int ret;
WARN_ON_ONCE(irqs_disabled_hw());
/* /*
* We need to run the IRQ tail hook whenever we don't * We need to run the IRQ tail hook each time we intercept a
* propagate a syscall to higher domains, because we know that * syscall, because we know that important operations might be
* important operations might be pending there (e.g. Xenomai * pending there (e.g. Xenomai deferred rescheduling).
* deferred rescheduling).
*/ */
hook = (__typeof__(hook))__ipipe_irq_tail_hook;
if (regs->orig_p0 < NR_syscalls) {
void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
hook(); hook();
if ((current->flags & PF_EVNOTIFY) == 0)
return 0;
}
/* /*
* This routine either returns: * This routine either returns:
...@@ -214,51 +210,47 @@ int __ipipe_syscall_root(struct pt_regs *regs) ...@@ -214,51 +210,47 @@ int __ipipe_syscall_root(struct pt_regs *regs)
* tail work has to be performed (for handling signals etc). * tail work has to be performed (for handling signals etc).
*/ */
if (!__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL)) if (!__ipipe_syscall_watched_p(current, regs->orig_p0) ||
!__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL))
return 0; return 0;
ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs); ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs);
flags = hard_local_irq_save(); hard_local_irq_disable();
if (!__ipipe_root_domain_p) { /*
hard_local_irq_restore(flags); * This is the end of the syscall path, so we may
return 1; * safely assume a valid Linux task stack here.
*/
if (current->ipipe_flags & PF_EVTRET) {
current->ipipe_flags &= ~PF_EVTRET;
__ipipe_dispatch_event(IPIPE_EVENT_RETURN, regs);
} }
if (!__ipipe_root_domain_p)
ret = -1;
else {
p = ipipe_root_cpudom_ptr(); p = ipipe_root_cpudom_ptr();
if ((p->irqpend_himask & IPIPE_IRQMASK_VIRT) != 0) if (__ipipe_ipending_p(p))
__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT); __ipipe_sync_pipeline();
}
hard_local_irq_restore(flags); hard_local_irq_enable();
return -ret; return -ret;
} }
unsigned long ipipe_critical_enter(void (*syncfn) (void))
{
unsigned long flags;
flags = hard_local_irq_save();
return flags;
}
void ipipe_critical_exit(unsigned long flags)
{
hard_local_irq_restore(flags);
}
static void __ipipe_no_irqtail(void) static void __ipipe_no_irqtail(void)
{ {
} }
int ipipe_get_sysinfo(struct ipipe_sysinfo *info) int ipipe_get_sysinfo(struct ipipe_sysinfo *info)
{ {
info->ncpus = num_online_cpus(); info->sys_nr_cpus = num_online_cpus();
info->cpufreq = ipipe_cpu_freq(); info->sys_cpu_freq = ipipe_cpu_freq();
info->archdep.tmirq = IPIPE_TIMER_IRQ; info->sys_hrtimer_irq = IPIPE_TIMER_IRQ;
info->archdep.tmfreq = info->cpufreq; info->sys_hrtimer_freq = __ipipe_core_clock;
info->sys_hrclock_freq = __ipipe_core_clock;
return 0; return 0;
} }
...@@ -289,6 +281,7 @@ int ipipe_trigger_irq(unsigned irq) ...@@ -289,6 +281,7 @@ int ipipe_trigger_irq(unsigned irq)
asmlinkage void __ipipe_sync_root(void) asmlinkage void __ipipe_sync_root(void)
{ {
void (*irq_tail_hook)(void) = (void (*)(void))__ipipe_irq_tail_hook; void (*irq_tail_hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
struct ipipe_percpu_domain_data *p;
unsigned long flags; unsigned long flags;
BUG_ON(irqs_disabled()); BUG_ON(irqs_disabled());
...@@ -300,19 +293,20 @@ asmlinkage void __ipipe_sync_root(void) ...@@ -300,19 +293,20 @@ asmlinkage void __ipipe_sync_root(void)
clear_thread_flag(TIF_IRQ_SYNC); clear_thread_flag(TIF_IRQ_SYNC);
if (ipipe_root_cpudom_var(irqpend_himask) != 0) p = ipipe_root_cpudom_ptr();
__ipipe_sync_pipeline(IPIPE_IRQMASK_ANY); if (__ipipe_ipending_p(p))
__ipipe_sync_pipeline();
hard_local_irq_restore(flags); hard_local_irq_restore(flags);
} }
void ___ipipe_sync_pipeline(unsigned long syncmask) void ___ipipe_sync_pipeline(void)
{ {
if (__ipipe_root_domain_p && if (__ipipe_root_domain_p &&
test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status))) test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
return; return;
__ipipe_sync_stage(syncmask); __ipipe_sync_stage();
} }
void __ipipe_disable_root_irqs_hw(void) void __ipipe_disable_root_irqs_hw(void)
......
...@@ -39,21 +39,23 @@ int show_interrupts(struct seq_file *p, void *v) ...@@ -39,21 +39,23 @@ int show_interrupts(struct seq_file *p, void *v)
unsigned long flags; unsigned long flags;
if (i < NR_IRQS) { if (i < NR_IRQS) {
raw_spin_lock_irqsave(&irq_desc[i].lock, flags); struct irq_desc *desc = irq_to_desc(i);
action = irq_desc[i].action;
raw_spin_lock_irqsave(&desc->lock, flags);
action = desc->action;
if (!action) if (!action)
goto skip; goto skip;
seq_printf(p, "%3d: ", i); seq_printf(p, "%3d: ", i);
for_each_online_cpu(j) for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
seq_printf(p, " %8s", irq_desc[i].chip->name); seq_printf(p, " %8s", get_irq_desc_chip(desc)->name);
seq_printf(p, " %s", action->name); seq_printf(p, " %s", action->name);
for (action = action->next; action; action = action->next) for (action = action->next; action; action = action->next)
seq_printf(p, " %s", action->name); seq_printf(p, " %s", action->name);
seq_putc(p, '\n'); seq_putc(p, '\n');
skip: skip:
raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); raw_spin_unlock_irqrestore(&desc->lock, flags);
} else if (i == NR_IRQS) { } else if (i == NR_IRQS) {
seq_printf(p, "NMI: "); seq_printf(p, "NMI: ");
for_each_online_cpu(j) for_each_online_cpu(j)
......
...@@ -422,11 +422,7 @@ int kgdb_arch_handle_exception(int vector, int signo, ...@@ -422,11 +422,7 @@ int kgdb_arch_handle_exception(int vector, int signo,
struct kgdb_arch arch_kgdb_ops = { struct kgdb_arch arch_kgdb_ops = {
.gdb_bpt_instr = {0xa1}, .gdb_bpt_instr = {0xa1},
#ifdef CONFIG_SMP
.flags = KGDB_HW_BREAKPOINT|KGDB_THR_PROC_SWAP,
#else
.flags = KGDB_HW_BREAKPOINT, .flags = KGDB_HW_BREAKPOINT,
#endif
.set_hw_breakpoint = bfin_set_hw_break, .set_hw_breakpoint = bfin_set_hw_break,
.remove_hw_breakpoint = bfin_remove_hw_break, .remove_hw_breakpoint = bfin_remove_hw_break,
.disable_hw_break = bfin_disable_hw_debug, .disable_hw_break = bfin_disable_hw_debug,
......
...@@ -215,11 +215,48 @@ void __init bfin_relocate_l1_mem(void) ...@@ -215,11 +215,48 @@ void __init bfin_relocate_l1_mem(void)
early_dma_memcpy_done(); early_dma_memcpy_done();
#if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1)
blackfin_iflush_l1_entry[0] = (unsigned long)blackfin_icache_flush_range_l1;
#endif
/* if necessary, copy L2 text/data to L2 SRAM */ /* if necessary, copy L2 text/data to L2 SRAM */
if (L2_LENGTH && l2_len) if (L2_LENGTH && l2_len)
memcpy(_stext_l2, _l2_lma, l2_len); memcpy(_stext_l2, _l2_lma, l2_len);
} }
#ifdef CONFIG_SMP
void __init bfin_relocate_coreb_l1_mem(void)
{
unsigned long text_l1_len = (unsigned long)_text_l1_len;
unsigned long data_l1_len = (unsigned long)_data_l1_len;
unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len;
blackfin_dma_early_init();
/* if necessary, copy L1 text to L1 instruction SRAM */
if (L1_CODE_LENGTH && text_l1_len)
early_dma_memcpy((void *)COREB_L1_CODE_START, _text_l1_lma,
text_l1_len);
/* if necessary, copy L1 data to L1 data bank A SRAM */
if (L1_DATA_A_LENGTH && data_l1_len)
early_dma_memcpy((void *)COREB_L1_DATA_A_START, _data_l1_lma,
data_l1_len);
/* if necessary, copy L1 data B to L1 data bank B SRAM */
if (L1_DATA_B_LENGTH && data_b_l1_len)
early_dma_memcpy((void *)COREB_L1_DATA_B_START, _data_b_l1_lma,
data_b_l1_len);
early_dma_memcpy_done();
#ifdef CONFIG_ICACHE_FLUSH_L1
blackfin_iflush_l1_entry[1] = (unsigned long)blackfin_icache_flush_range_l1 -
(unsigned long)_stext_l1 + COREB_L1_CODE_START;
#endif
}
#endif
#ifdef CONFIG_ROMKERNEL #ifdef CONFIG_ROMKERNEL
void __init bfin_relocate_xip_data(void) void __init bfin_relocate_xip_data(void)
{ {
......
...@@ -136,7 +136,7 @@ SECTIONS ...@@ -136,7 +136,7 @@ SECTIONS
. = ALIGN(16); . = ALIGN(16);
INIT_DATA_SECTION(16) INIT_DATA_SECTION(16)
PERCPU(32, 4) PERCPU(32, PAGE_SIZE)
.exit.data : .exit.data :
{ {
...@@ -176,6 +176,7 @@ SECTIONS ...@@ -176,6 +176,7 @@ SECTIONS
{ {
. = ALIGN(4); . = ALIGN(4);
__stext_l1 = .; __stext_l1 = .;
*(.l1.text.head)
*(.l1.text) *(.l1.text)
#ifdef CONFIG_SCHEDULE_L1 #ifdef CONFIG_SCHEDULE_L1
SCHED_TEXT SCHED_TEXT
......
...@@ -1201,25 +1201,6 @@ ...@@ -1201,25 +1201,6 @@
#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ #define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ #define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/
/* HDMAx_CTL Masks */
#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */
#define REP 0x0002 /* HDMA Request Polarity */
#define UTE 0x0004 /* Urgency Threshold Enable */
#define OIE 0x0010 /* Overflow Interrupt Enable */
#define BDIE 0x0020 /* Block Done Interrupt Enable */
#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */
#define DRQ 0x0300 /* HDMA Request Type */
#define DRQ_NONE 0x0000 /* No Request */
#define DRQ_SINGLE 0x0100 /* Channels Request Single */
#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */
#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */
#define RBC 0x1000 /* Reload BCNT With IBCNT */
#define PS 0x2000 /* HDMA Pin Status */
#define OI 0x4000 /* Overflow Interrupt Generated */
#define BDI 0x8000 /* Block Done Interrupt Generated */
/* entry addresses of the user-callable Boot ROM functions */ /* entry addresses of the user-callable Boot ROM functions */
#define _BOOTROM_RESET 0xEF000000 #define _BOOTROM_RESET 0xEF000000
......
...@@ -1204,25 +1204,6 @@ ...@@ -1204,25 +1204,6 @@
#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ #define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ #define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/
/* HDMAx_CTL Masks */
#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */
#define REP 0x0002 /* HDMA Request Polarity */
#define UTE 0x0004 /* Urgency Threshold Enable */
#define OIE 0x0010 /* Overflow Interrupt Enable */
#define BDIE 0x0020 /* Block Done Interrupt Enable */
#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */
#define DRQ 0x0300 /* HDMA Request Type */
#define DRQ_NONE 0x0000 /* No Request */
#define DRQ_SINGLE 0x0100 /* Channels Request Single */
#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */
#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */
#define RBC 0x1000 /* Reload BCNT With IBCNT */
#define PS 0x2000 /* HDMA Pin Status */
#define OI 0x4000 /* Overflow Interrupt Generated */
#define BDI 0x8000 /* Block Done Interrupt Generated */
/* entry addresses of the user-callable Boot ROM functions */ /* entry addresses of the user-callable Boot ROM functions */
#define _BOOTROM_RESET 0xEF000000 #define _BOOTROM_RESET 0xEF000000
......
...@@ -289,8 +289,6 @@ static struct platform_device *ip0x_devices[] __initdata = { ...@@ -289,8 +289,6 @@ static struct platform_device *ip0x_devices[] __initdata = {
static int __init ip0x_init(void) static int __init ip0x_init(void)
{ {
int i;
printk(KERN_INFO "%s(): registering device resources\n", __func__); printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices)); platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices));
......
...@@ -775,7 +775,7 @@ static int __init cm_bf537e_init(void) ...@@ -775,7 +775,7 @@ static int __init cm_bf537e_init(void)
#endif #endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif #endif
return 0; return 0;
} }
......
...@@ -740,7 +740,7 @@ static int __init cm_bf537u_init(void) ...@@ -740,7 +740,7 @@ static int __init cm_bf537u_init(void)
#endif #endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif #endif
return 0; return 0;
} }
......
...@@ -128,30 +128,11 @@ static struct platform_device asmb_flash_device = { ...@@ -128,30 +128,11 @@ static struct platform_device asmb_flash_device = {
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
static int bfin_mmc_spi_init(struct device *dev,
irqreturn_t (*detect_int)(int, void *), void *data)
{
return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
}
static void bfin_mmc_spi_exit(struct device *dev, void *data)
{
free_irq(MMC_SPI_CARD_DETECT_INT, data);
}
static struct bfin5xx_spi_chip mmc_spi_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, /* use no dma transfer with this chip*/ .enable_dma = 0, /* use no dma transfer with this chip*/
.bits_per_word = 8, .bits_per_word = 8,
}; };
static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
.init = bfin_mmc_spi_init,
.exit = bfin_mmc_spi_exit,
.detect_delay = 100, /* msecs */
};
#endif #endif
#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) #if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
...@@ -192,7 +173,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -192,7 +173,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.max_speed_hz = 20000000, .max_speed_hz = 20000000,
.bus_num = 0, .bus_num = 0,
.chip_select = 1, .chip_select = 1,
.platform_data = &bfin_mmc_spi_pdata,
.controller_data = &mmc_spi_chip_info, .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
......
...@@ -742,7 +742,7 @@ static int __init tcm_bf537_init(void) ...@@ -742,7 +742,7 @@ static int __init tcm_bf537_init(void)
#endif #endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif #endif
return 0; return 0;
} }
......
...@@ -1520,24 +1520,6 @@ ...@@ -1520,24 +1520,6 @@
#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ #define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ #define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/
/* HDMAx_CTL Masks */
#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */
#define REP 0x0002 /* HDMA Request Polarity */
#define UTE 0x0004 /* Urgency Threshold Enable */
#define OIE 0x0010 /* Overflow Interrupt Enable */
#define BDIE 0x0020 /* Block Done Interrupt Enable */
#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */
#define DRQ 0x0300 /* HDMA Request Type */
#define DRQ_NONE 0x0000 /* No Request */
#define DRQ_SINGLE 0x0100 /* Channels Request Single */
#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */
#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */
#define RBC 0x1000 /* Reload BCNT With IBCNT */
#define PS 0x2000 /* HDMA Pin Status */
#define OI 0x4000 /* Overflow Interrupt Generated */
#define BDI 0x8000 /* Block Done Interrupt Generated */
/* entry addresses of the user-callable Boot ROM functions */ /* entry addresses of the user-callable Boot ROM functions */
#define _BOOTROM_RESET 0xEF000000 #define _BOOTROM_RESET 0xEF000000
......
...@@ -42,6 +42,65 @@ config BF548_ATAPI_ALTERNATIVE_PORT ...@@ -42,6 +42,65 @@ config BF548_ATAPI_ALTERNATIVE_PORT
async address or GPIO port F and G. Select y to route it async address or GPIO port F and G. Select y to route it
to GPIO. to GPIO.
choice
prompt "UART2 DMA channel selection"
depends on SERIAL_BFIN_UART2
default UART2_DMA_RX_ON_DMA18
help
UART2 DMA channel selection
RX -> DMA18
TX -> DMA19
or
RX -> DMA13
TX -> DMA14
config UART2_DMA_RX_ON_DMA18
bool "UART2 DMA RX -> DMA18 TX -> DMA19"
help
UART2 DMA channel assignment
RX -> DMA18
TX -> DMA19
use SPORT2 default DMA channel
config UART2_DMA_RX_ON_DMA13
bool "UART2 DMA RX -> DMA13 TX -> DMA14"
help
UART2 DMA channel assignment
RX -> DMA13
TX -> DMA14
use EPPI1 EPPI2 default DMA channel
endchoice
choice
prompt "UART3 DMA channel selection"
depends on SERIAL_BFIN_UART3
default UART3_DMA_RX_ON_DMA20
help
UART3 DMA channel selection
RX -> DMA20
TX -> DMA21
or
RX -> DMA15
TX -> DMA16
config UART3_DMA_RX_ON_DMA20
bool "UART3 DMA RX -> DMA20 TX -> DMA21"
help
UART3 DMA channel assignment
RX -> DMA20
TX -> DMA21
use SPORT3 default DMA channel
config UART3_DMA_RX_ON_DMA15
bool "UART3 DMA RX -> DMA15 TX -> DMA16"
help
UART3 DMA channel assignment
RX -> DMA15
TX -> DMA16
use PIXC default DMA channel
endchoice
comment "Interrupt Priority Assignment" comment "Interrupt Priority Assignment"
menu "Priority" menu "Priority"
......
...@@ -778,11 +778,12 @@ static struct platform_device bfin_sport3_uart_device = { ...@@ -778,11 +778,12 @@ static struct platform_device bfin_sport3_uart_device = {
#endif #endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
static unsigned short bfin_can_peripherals[] = {
static unsigned short bfin_can0_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0 P_CAN0_RX, P_CAN0_TX, 0
}; };
static struct resource bfin_can_resources[] = { static struct resource bfin_can0_resources[] = {
{ {
.start = 0xFFC02A00, .start = 0xFFC02A00,
.end = 0xFFC02FFF, .end = 0xFFC02FFF,
...@@ -805,14 +806,53 @@ static struct resource bfin_can_resources[] = { ...@@ -805,14 +806,53 @@ static struct resource bfin_can_resources[] = {
}, },
}; };
static struct platform_device bfin_can_device = { static struct platform_device bfin_can0_device = {
.name = "bfin_can", .name = "bfin_can",
.num_resources = ARRAY_SIZE(bfin_can_resources), .id = 0,
.resource = bfin_can_resources, .num_resources = ARRAY_SIZE(bfin_can0_resources),
.resource = bfin_can0_resources,
.dev = { .dev = {
.platform_data = &bfin_can_peripherals, /* Passed to driver */ .platform_data = &bfin_can0_peripherals, /* Passed to driver */
}, },
}; };
static unsigned short bfin_can1_peripherals[] = {
P_CAN1_RX, P_CAN1_TX, 0
};
static struct resource bfin_can1_resources[] = {
{
.start = 0xFFC03200,
.end = 0xFFC037FF,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_CAN1_RX,
.end = IRQ_CAN1_RX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_CAN1_TX,
.end = IRQ_CAN1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_CAN1_ERROR,
.end = IRQ_CAN1_ERROR,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bfin_can1_device = {
.name = "bfin_can",
.id = 1,
.num_resources = ARRAY_SIZE(bfin_can1_resources),
.resource = bfin_can1_resources,
.dev = {
.platform_data = &bfin_can1_peripherals, /* Passed to driver */
},
};
#endif #endif
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
...@@ -1366,7 +1406,8 @@ static struct platform_device *ezkit_devices[] __initdata = { ...@@ -1366,7 +1406,8 @@ static struct platform_device *ezkit_devices[] __initdata = {
#endif #endif
#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
&bfin_can_device, &bfin_can0_device,
&bfin_can1_device,
#endif #endif
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
......
...@@ -657,22 +657,4 @@ ...@@ -657,22 +657,4 @@
/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
/* Bit masks for HMDMAx_CONTROL */
#define HMDMAEN 0x1 /* Handshake MDMA Enable */
#define REP 0x2 /* Handshake MDMA Request Polarity */
#define UTE 0x8 /* Urgency Threshold Enable */
#define OIE 0x10 /* Overflow Interrupt Enable */
#define BDIE 0x20 /* Block Done Interrupt Enable */
#define MBDI 0x40 /* Mask Block Done Interrupt */
#define DRQ 0x300 /* Handshake MDMA Request Type */
#define RBC 0x1000 /* Force Reload of BCOUNT */
#define PS 0x2000 /* Pin Status */
#define OI 0x4000 /* Overflow Interrupt Generated */
#define BDI 0x8000 /* Block Done Interrupt Generated */
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
/* ******************************************* */
#endif /* _DEF_BF544_H */ #endif /* _DEF_BF544_H */
...@@ -1063,23 +1063,4 @@ ...@@ -1063,23 +1063,4 @@
#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ #define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
/* Bit masks for HMDMAx_CONTROL */
#define HMDMAEN 0x1 /* Handshake MDMA Enable */
#define REP 0x2 /* Handshake MDMA Request Polarity */
#define UTE 0x8 /* Urgency Threshold Enable */
#define OIE 0x10 /* Overflow Interrupt Enable */
#define BDIE 0x20 /* Block Done Interrupt Enable */
#define MBDI 0x40 /* Mask Block Done Interrupt */
#define DRQ 0x300 /* Handshake MDMA Request Type */
#define RBC 0x1000 /* Force Reload of BCOUNT */
#define PS 0x2000 /* Pin Status */
#define OI 0x4000 /* Overflow Interrupt Generated */
#define BDI 0x8000 /* Block Done Interrupt Generated */
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
/* ******************************************* */
#endif /* _DEF_BF547_H */ #endif /* _DEF_BF547_H */
...@@ -27,17 +27,37 @@ ...@@ -27,17 +27,37 @@
#define CH_PIXC_OVERLAY 16 #define CH_PIXC_OVERLAY 16
#define CH_PIXC_OUTPUT 17 #define CH_PIXC_OUTPUT 17
#define CH_SPORT2_RX 18 #define CH_SPORT2_RX 18
#define CH_UART2_RX 18
#define CH_SPORT2_TX 19 #define CH_SPORT2_TX 19
#define CH_UART2_TX 19
#define CH_SPORT3_RX 20 #define CH_SPORT3_RX 20
#define CH_UART3_RX 20
#define CH_SPORT3_TX 21 #define CH_SPORT3_TX 21
#define CH_UART3_TX 21
#define CH_SDH 22 #define CH_SDH 22
#define CH_NFC 22 #define CH_NFC 22
#define CH_SPI2 23 #define CH_SPI2 23
#if defined(CONFIG_UART2_DMA_RX_ON_DMA13)
#define CH_UART2_RX 13
#define IRQ_UART2_RX BFIN_IRQ(37) /* UART2 RX USE EPP1 (DMA13) Interrupt */
#define CH_UART2_TX 14
#define IRQ_UART2_TX BFIN_IRQ(38) /* UART2 RX USE EPP1 (DMA14) Interrupt */
#else /* Default USE SPORT2's DMA Channel */
#define CH_UART2_RX 18
#define IRQ_UART2_RX BFIN_IRQ(33) /* UART2 RX (DMA18) Interrupt */
#define CH_UART2_TX 19
#define IRQ_UART2_TX BFIN_IRQ(34) /* UART2 TX (DMA19) Interrupt */
#endif
#if defined(CONFIG_UART3_DMA_RX_ON_DMA15)
#define CH_UART3_RX 15
#define IRQ_UART3_RX BFIN_IRQ(64) /* UART3 RX USE PIXC IN0 (DMA15) Interrupt */
#define CH_UART3_TX 16
#define IRQ_UART3_TX BFIN_IRQ(65) /* UART3 TX USE PIXC IN1 (DMA16) Interrupt */
#else /* Default USE SPORT3's DMA Channel */
#define CH_UART3_RX 20
#define IRQ_UART3_RX BFIN_IRQ(35) /* UART3 RX (DMA20) Interrupt */
#define CH_UART3_TX 21
#define IRQ_UART3_TX BFIN_IRQ(36) /* UART3 TX (DMA21) Interrupt */
#endif
#define CH_MEM_STREAM0_DEST 24 #define CH_MEM_STREAM0_DEST 24
#define CH_MEM_STREAM0_SRC 25 #define CH_MEM_STREAM0_SRC 25
#define CH_MEM_STREAM1_DEST 26 #define CH_MEM_STREAM1_DEST 26
......
...@@ -74,13 +74,9 @@ Events (highest priority) EMU 0 ...@@ -74,13 +74,9 @@ Events (highest priority) EMU 0
#define IRQ_UART2_ERROR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */ #define IRQ_UART2_ERROR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */
#define IRQ_CAN0_ERROR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */ #define IRQ_CAN0_ERROR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */
#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */ #define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */
#define IRQ_UART2_RX BFIN_IRQ(33) /* UART2 RX (DMA18) Interrupt */
#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */ #define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */
#define IRQ_UART2_TX BFIN_IRQ(34) /* UART2 TX (DMA19) Interrupt */
#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */ #define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */
#define IRQ_UART3_RX BFIN_IRQ(35) /* UART3 RX (DMA20) Interrupt */
#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */ #define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */
#define IRQ_UART3_TX BFIN_IRQ(36) /* UART3 TX (DMA21) Interrupt */
#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */ #define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */
#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */ #define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */
#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */ #define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */
......
...@@ -541,7 +541,7 @@ static int __init cm_bf561_init(void) ...@@ -541,7 +541,7 @@ static int __init cm_bf561_init(void)
#endif #endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif #endif
return 0; return 0;
} }
......
...@@ -5,30 +5,27 @@ ...@@ -5,30 +5,27 @@
* Licensed under the GPL-2 or later. * Licensed under the GPL-2 or later.
*/ */
#include <linux/smp.h>
#include <asm/blackfin.h> #include <asm/blackfin.h>
#include <asm/irq.h> #include <mach/pll.h>
#include <asm/smp.h>
#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1))
int hotplug_coreb; int hotplug_coreb;
void platform_cpu_die(void) void platform_cpu_die(void)
{ {
unsigned long iwr[2] = {0, 0}; unsigned long iwr;
unsigned long bank = SIC_SYSIRQ(IRQ_SUPPLE_0) / 32;
unsigned long bit = 1 << (SIC_SYSIRQ(IRQ_SUPPLE_0) % 32);
hotplug_coreb = 1; hotplug_coreb = 1;
iwr[bank] = bit;
/* disable core timer */ /* disable core timer */
bfin_write_TCNTL(0); bfin_write_TCNTL(0);
/* clear ipi interrupt IRQ_SUPPLE_0 */ /* clear ipi interrupt IRQ_SUPPLE_0 of CoreB */
bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + 1))); bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + 1)));
SSYNC(); SSYNC();
coreb_sleep(iwr[0], iwr[1], 0); /* set CoreB wakeup by ipi0, iwr will be discarded */
bfin_iwr_set_sup0(&iwr, &iwr, &iwr);
SSYNC();
coreb_die();
} }
...@@ -13,7 +13,11 @@ ...@@ -13,7 +13,11 @@
#include <asm/asm-offsets.h> #include <asm/asm-offsets.h>
#include <asm/trace.h> #include <asm/trace.h>
__INIT /*
* This code must come first as CoreB is hardcoded (in hardware)
* to start at the beginning of its L1 instruction memory.
*/
.section .l1.text.head
/* Lay the initial stack into the L1 scratch area of Core B */ /* Lay the initial stack into the L1 scratch area of Core B */
#define INITIAL_STACK (COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) #define INITIAL_STACK (COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
...@@ -160,43 +164,34 @@ ENTRY(_coreb_trampoline_start) ...@@ -160,43 +164,34 @@ ENTRY(_coreb_trampoline_start)
.LWAIT_HERE: .LWAIT_HERE:
jump .LWAIT_HERE; jump .LWAIT_HERE;
ENDPROC(_coreb_trampoline_start) ENDPROC(_coreb_trampoline_start)
ENTRY(_coreb_trampoline_end)
#ifdef CONFIG_HOTPLUG_CPU
.section ".text" .section ".text"
ENTRY(_set_sicb_iwr) ENTRY(_coreb_die)
P0.H = hi(SICB_IWR0);
P0.L = lo(SICB_IWR0);
P1.H = hi(SICB_IWR1);
P1.L = lo(SICB_IWR1);
[P0] = R0;
[P1] = R1;
SSYNC;
RTS;
ENDPROC(_set_sicb_iwr)
ENTRY(_coreb_sleep)
sp.l = lo(INITIAL_STACK); sp.l = lo(INITIAL_STACK);
sp.h = hi(INITIAL_STACK); sp.h = hi(INITIAL_STACK);
fp = sp; fp = sp;
usp = sp; usp = sp;
call _set_sicb_iwr;
CLI R2; CLI R2;
SSYNC; SSYNC;
IDLE; IDLE;
STI R2; STI R2;
R0 = IWR_DISABLE_ALL; R0 = IWR_DISABLE_ALL;
R1 = IWR_DISABLE_ALL; P0.H = hi(SYSMMR_BASE);
call _set_sicb_iwr; P0.L = lo(SYSMMR_BASE);
[P0 + (SICB_IWR0 - SYSMMR_BASE)] = R0;
[P0 + (SICB_IWR1 - SYSMMR_BASE)] = R0;
SSYNC;
p0.h = hi(COREB_L1_CODE_START); p0.h = hi(COREB_L1_CODE_START);
p0.l = lo(COREB_L1_CODE_START); p0.l = lo(COREB_L1_CODE_START);
jump (p0); jump (p0);
ENDPROC(_coreb_sleep) ENDPROC(_coreb_die)
#endif
__CPUINIT __INIT
ENTRY(_coreb_start) ENTRY(_coreb_start)
[--sp] = reti; [--sp] = reti;
......
...@@ -30,18 +30,11 @@ void __init platform_init_cpus(void) ...@@ -30,18 +30,11 @@ void __init platform_init_cpus(void)
void __init platform_prepare_cpus(unsigned int max_cpus) void __init platform_prepare_cpus(unsigned int max_cpus)
{ {
int len; bfin_relocate_coreb_l1_mem();
len = &coreb_trampoline_end - &coreb_trampoline_start + 1;
BUG_ON(len > L1_CODE_LENGTH);
dma_memcpy((void *)COREB_L1_CODE_START, &coreb_trampoline_start, len);
/* Both cores ought to be present on a bf561! */ /* Both cores ought to be present on a bf561! */
cpu_set(0, cpu_present_map); /* CoreA */ cpu_set(0, cpu_present_map); /* CoreA */
cpu_set(1, cpu_present_map); /* CoreB */ cpu_set(1, cpu_present_map); /* CoreB */
printk(KERN_INFO "CoreB bootstrap code to SRAM %p via DMA.\n", (void *)COREB_L1_CODE_START);
} }
int __init setup_profiling_timer(unsigned int multiplier) /* not supported */ int __init setup_profiling_timer(unsigned int multiplier) /* not supported */
...@@ -161,9 +154,13 @@ void platform_clear_ipi(unsigned int cpu, int irq) ...@@ -161,9 +154,13 @@ void platform_clear_ipi(unsigned int cpu, int irq)
void __cpuinit bfin_local_timer_setup(void) void __cpuinit bfin_local_timer_setup(void)
{ {
#if defined(CONFIG_TICKSOURCE_CORETMR) #if defined(CONFIG_TICKSOURCE_CORETMR)
struct irq_chip *chip = get_irq_chip(IRQ_CORETMR);
struct irq_desc *desc = irq_to_desc(IRQ_CORETMR);
bfin_coretmr_init(); bfin_coretmr_init();
bfin_coretmr_clockevent_init(); bfin_coretmr_clockevent_init();
get_irq_chip(IRQ_CORETMR)->unmask(IRQ_CORETMR);
chip->irq_unmask(&desc->irq_data);
#else #else
/* Power down the core timer, just to play safe. */ /* Power down the core timer, just to play safe. */
bfin_write_TCNTL(0); bfin_write_TCNTL(0);
......
...@@ -61,6 +61,6 @@ ...@@ -61,6 +61,6 @@
# error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory" # error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory"
#endif #endif
#if ANOMALY_05000491 && !defined(CONFIG_CACHE_FLUSH_L1) #if ANOMALY_05000491 && !defined(CONFIG_ICACHE_FLUSH_L1)
# error You need IFLUSH in L1 inst while Anomaly 05000491 applies # error You need IFLUSH in L1 inst while Anomaly 05000491 applies
#endif #endif
...@@ -11,12 +11,6 @@ ...@@ -11,12 +11,6 @@
#include <asm/cache.h> #include <asm/cache.h>
#include <asm/page.h> #include <asm/page.h>
#ifdef CONFIG_CACHE_FLUSH_L1
.section .l1.text
#else
.text
#endif
/* 05000443 - IFLUSH cannot be last instruction in hardware loop */ /* 05000443 - IFLUSH cannot be last instruction in hardware loop */
#if ANOMALY_05000443 #if ANOMALY_05000443
# define BROK_FLUSH_INST "IFLUSH" # define BROK_FLUSH_INST "IFLUSH"
...@@ -68,11 +62,43 @@ ...@@ -68,11 +62,43 @@
RTS; RTS;
.endm .endm
#ifdef CONFIG_ICACHE_FLUSH_L1
.section .l1.text
#else
.text
#endif
/* Invalidate all instruction cache lines assocoiated with this memory area */ /* Invalidate all instruction cache lines assocoiated with this memory area */
#ifdef CONFIG_SMP
# define _blackfin_icache_flush_range _blackfin_icache_flush_range_l1
#endif
ENTRY(_blackfin_icache_flush_range) ENTRY(_blackfin_icache_flush_range)
do_flush IFLUSH do_flush IFLUSH
ENDPROC(_blackfin_icache_flush_range) ENDPROC(_blackfin_icache_flush_range)
#ifdef CONFIG_SMP
.text
# undef _blackfin_icache_flush_range
ENTRY(_blackfin_icache_flush_range)
p0.L = LO(DSPID);
p0.H = HI(DSPID);
r3 = [p0];
r3 = r3.b (z);
p2 = r3;
p0.L = _blackfin_iflush_l1_entry;
p0.H = _blackfin_iflush_l1_entry;
p0 = p0 + (p2 << 2);
p1 = [p0];
jump (p1);
ENDPROC(_blackfin_icache_flush_range)
#endif
#ifdef CONFIG_DCACHE_FLUSH_L1
.section .l1.text
#else
.text
#endif
/* Throw away all D-cached data in specified region without any obligation to /* Throw away all D-cached data in specified region without any obligation to
* write them back. Since the Blackfin ISA does not have an "invalidate" * write them back. Since the Blackfin ISA does not have an "invalidate"
* instruction, we use flush/invalidate. Perhaps as a speed optimization we * instruction, we use flush/invalidate. Perhaps as a speed optimization we
......
/* /*
* Blackfin core clock scaling * Blackfin core clock scaling
* *
* Copyright 2008-2009 Analog Devices Inc. * Copyright 2008-2011 Analog Devices Inc.
* *
* Licensed under the GPL-2 or later. * Licensed under the GPL-2 or later.
*/ */
...@@ -16,10 +16,8 @@ ...@@ -16,10 +16,8 @@
#include <asm/time.h> #include <asm/time.h>
#include <asm/dpmc.h> #include <asm/dpmc.h>
#define CPUFREQ_CPU 0
/* this is the table of CCLK frequencies, in Hz */ /* this is the table of CCLK frequencies, in Hz */
/* .index is the entry in the auxillary dpm_state_table[] */ /* .index is the entry in the auxiliary dpm_state_table[] */
static struct cpufreq_frequency_table bfin_freq_table[] = { static struct cpufreq_frequency_table bfin_freq_table[] = {
{ {
.frequency = CPUFREQ_TABLE_END, .frequency = CPUFREQ_TABLE_END,
...@@ -46,7 +44,7 @@ static struct bfin_dpm_state { ...@@ -46,7 +44,7 @@ static struct bfin_dpm_state {
#if defined(CONFIG_CYCLES_CLOCKSOURCE) #if defined(CONFIG_CYCLES_CLOCKSOURCE)
/* /*
* normalized to maximum frequncy offset for CYCLES, * normalized to maximum frequency offset for CYCLES,
* used in time-ts cycles clock source, but could be used * used in time-ts cycles clock source, but could be used
* somewhere also. * somewhere also.
*/ */
......
...@@ -61,17 +61,63 @@ static unsigned int bfin_get_vlev(unsigned int freq) ...@@ -61,17 +61,63 @@ static unsigned int bfin_get_vlev(unsigned int freq)
} }
#ifdef CONFIG_CPU_FREQ #ifdef CONFIG_CPU_FREQ
# ifdef CONFIG_SMP
static void bfin_idle_this_cpu(void *info)
{
unsigned long flags = 0;
unsigned long iwr0, iwr1, iwr2;
unsigned int cpu = smp_processor_id();
local_irq_save_hw(flags);
bfin_iwr_set_sup0(&iwr0, &iwr1, &iwr2);
platform_clear_ipi(cpu, IRQ_SUPPLE_0);
SSYNC();
asm("IDLE;");
bfin_iwr_restore(iwr0, iwr1, iwr2);
local_irq_restore_hw(flags);
}
static void bfin_idle_cpu(void)
{
smp_call_function(bfin_idle_this_cpu, NULL, 0);
}
static void bfin_wakeup_cpu(void)
{
unsigned int cpu;
unsigned int this_cpu = smp_processor_id();
cpumask_t mask = cpu_online_map;
cpu_clear(this_cpu, mask);
for_each_cpu_mask(cpu, mask)
platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
}
# else
static void bfin_idle_cpu(void) {}
static void bfin_wakeup_cpu(void) {}
# endif
static int static int
vreg_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) vreg_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
{ {
struct cpufreq_freqs *freq = data; struct cpufreq_freqs *freq = data;
if (freq->cpu != CPUFREQ_CPU)
return 0;
if (val == CPUFREQ_PRECHANGE && freq->old < freq->new) { if (val == CPUFREQ_PRECHANGE && freq->old < freq->new) {
bfin_idle_cpu();
bfin_set_vlev(bfin_get_vlev(freq->new)); bfin_set_vlev(bfin_get_vlev(freq->new));
udelay(pdata->vr_settling_time); /* Wait until Volatge settled */ udelay(pdata->vr_settling_time); /* Wait until Volatge settled */
bfin_wakeup_cpu();
} else if (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) } else if (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) {
bfin_idle_cpu();
bfin_set_vlev(bfin_get_vlev(freq->new)); bfin_set_vlev(bfin_get_vlev(freq->new));
bfin_wakeup_cpu();
}
return 0; return 0;
} }
......
...@@ -952,8 +952,17 @@ ENDPROC(_evt_up_evt14) ...@@ -952,8 +952,17 @@ ENDPROC(_evt_up_evt14)
#ifdef CONFIG_IPIPE #ifdef CONFIG_IPIPE
_resume_kernel_from_int: _resume_kernel_from_int:
r1 = LO(~0x8000) (Z);
r1 = r0 & r1;
r0 = 1;
r0 = r1 - r0;
r2 = r1 & r0;
cc = r2 == 0;
/* Sync the root stage only from the outer interrupt level. */
if !cc jump .Lnosync;
r0.l = ___ipipe_sync_root; r0.l = ___ipipe_sync_root;
r0.h = ___ipipe_sync_root; r0.h = ___ipipe_sync_root;
[--sp] = reti;
[--sp] = rets; [--sp] = rets;
[--sp] = ( r7:4, p5:3 ); [--sp] = ( r7:4, p5:3 );
SP += -12; SP += -12;
...@@ -961,6 +970,8 @@ _resume_kernel_from_int: ...@@ -961,6 +970,8 @@ _resume_kernel_from_int:
SP += 12; SP += 12;
( r7:4, p5:3 ) = [sp++]; ( r7:4, p5:3 ) = [sp++];
rets = [sp++]; rets = [sp++];
reti = [sp++];
.Lnosync:
rts rts
#elif defined(CONFIG_PREEMPT) #elif defined(CONFIG_PREEMPT)
...@@ -1738,6 +1749,9 @@ ENTRY(_sys_call_table) ...@@ -1738,6 +1749,9 @@ ENTRY(_sys_call_table)
.long _sys_fanotify_mark .long _sys_fanotify_mark
.long _sys_prlimit64 .long _sys_prlimit64
.long _sys_cacheflush .long _sys_cacheflush
.long _sys_name_to_handle_at /* 375 */
.long _sys_open_by_handle_at
.long _sys_clock_adjtime
.rept NR_syscalls-(.-_sys_call_table)/4 .rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall .long _sys_ni_syscall
......
...@@ -31,6 +31,7 @@ ENDPROC(__init_clear_bss) ...@@ -31,6 +31,7 @@ ENDPROC(__init_clear_bss)
ENTRY(__start) ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */ /* R0: argument of command line string, passed from uboot, save it */
R7 = R0; R7 = R0;
/* Enable Cycle Counter and Nesting Of Interrupts */ /* Enable Cycle Counter and Nesting Of Interrupts */
#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES #ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
R0 = SYSCFG_SNEN; R0 = SYSCFG_SNEN;
...@@ -38,76 +39,49 @@ ENTRY(__start) ...@@ -38,76 +39,49 @@ ENTRY(__start)
R0 = SYSCFG_SNEN | SYSCFG_CCEN; R0 = SYSCFG_SNEN | SYSCFG_CCEN;
#endif #endif
SYSCFG = R0; SYSCFG = R0;
R0 = 0;
/* Optimization register tricks: keep a base value in the
/* Clear Out All the data and pointer Registers */ * reserved P registers so we use the load/store with an
R1 = R0; * offset syntax. R0 = [P5 + <constant>];
R2 = R0; * P5 - core MMR base
R3 = R0; * R6 - 0
R4 = R0; */
R5 = R0; r6 = 0;
R6 = R0; p5.l = 0;
p5.h = hi(COREMMR_BASE);
P0 = R0;
P1 = R0; /* Zero out registers required by Blackfin ABI */
P2 = R0;
P3 = R0; /* Disable circular buffers */
P4 = R0; L0 = r6;
P5 = R0; L1 = r6;
L2 = r6;
LC0 = r0; L3 = r6;
LC1 = r0;
L0 = r0; /* Disable hardware loops in case we were started by 'go' */
L1 = r0; LC0 = r6;
L2 = r0; LC1 = r6;
L3 = r0;
/* Clear Out All the DAG Registers */
B0 = r0;
B1 = r0;
B2 = r0;
B3 = r0;
I0 = r0;
I1 = r0;
I2 = r0;
I3 = r0;
M0 = r0;
M1 = r0;
M2 = r0;
M3 = r0;
/* /*
* Clear ITEST_COMMAND and DTEST_COMMAND registers, * Clear ITEST_COMMAND and DTEST_COMMAND registers,
* Leaving these as non-zero can confuse the emulator * Leaving these as non-zero can confuse the emulator
*/ */
p0.L = LO(DTEST_COMMAND); [p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6;
p0.H = HI(DTEST_COMMAND); [p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6;
[p0] = R0;
[p0 + (ITEST_COMMAND - DTEST_COMMAND)] = R0;
CSYNC; CSYNC;
trace_buffer_init(p0,r0); trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */ /* Turn off the icache */
p0.l = LO(IMEM_CONTROL); r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)];
p0.h = HI(IMEM_CONTROL); BITCLR (r1, ENICPLB_P);
R1 = [p0]; [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1;
R0 = ~ENICPLB;
R0 = R0 & R1;
[p0] = R0;
SSYNC; SSYNC;
/* Turn off the dcache */ /* Turn off the dcache */
p0.l = LO(DMEM_CONTROL); r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)];
p0.h = HI(DMEM_CONTROL); BITCLR (r1, ENDCPLB_P);
R1 = [p0]; [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1;
R0 = ~ENDCPLB;
R0 = R0 & R1;
[p0] = R0;
SSYNC; SSYNC;
/* in case of double faults, save a few things */ /* in case of double faults, save a few things */
...@@ -122,25 +96,25 @@ ENTRY(__start) ...@@ -122,25 +96,25 @@ ENTRY(__start)
* below * below
*/ */
GET_PDA(p0, r0); GET_PDA(p0, r0);
r6 = [p0 + PDA_DF_RETX]; r5 = [p0 + PDA_DF_RETX];
p1.l = _init_saved_retx; p1.l = _init_saved_retx;
p1.h = _init_saved_retx; p1.h = _init_saved_retx;
[p1] = r6; [p1] = r5;
r6 = [p0 + PDA_DF_DCPLB]; r5 = [p0 + PDA_DF_DCPLB];
p1.l = _init_saved_dcplb_fault_addr; p1.l = _init_saved_dcplb_fault_addr;
p1.h = _init_saved_dcplb_fault_addr; p1.h = _init_saved_dcplb_fault_addr;
[p1] = r6; [p1] = r5;
r6 = [p0 + PDA_DF_ICPLB]; r5 = [p0 + PDA_DF_ICPLB];
p1.l = _init_saved_icplb_fault_addr; p1.l = _init_saved_icplb_fault_addr;
p1.h = _init_saved_icplb_fault_addr; p1.h = _init_saved_icplb_fault_addr;
[p1] = r6; [p1] = r5;
r6 = [p0 + PDA_DF_SEQSTAT]; r5 = [p0 + PDA_DF_SEQSTAT];
p1.l = _init_saved_seqstat; p1.l = _init_saved_seqstat;
p1.h = _init_saved_seqstat; p1.h = _init_saved_seqstat;
[p1] = r6; [p1] = r5;
#endif #endif
/* Initialize stack pointer */ /* Initialize stack pointer */
...@@ -155,7 +129,7 @@ ENTRY(__start) ...@@ -155,7 +129,7 @@ ENTRY(__start)
sti r0; sti r0;
#endif #endif
r0 = 0 (x); r0 = r6;
/* Zero out all of the fun bss regions */ /* Zero out all of the fun bss regions */
#if L1_DATA_A_LENGTH > 0 #if L1_DATA_A_LENGTH > 0
r1.l = __sbss_l1; r1.l = __sbss_l1;
...@@ -210,11 +184,9 @@ ENTRY(__start) ...@@ -210,11 +184,9 @@ ENTRY(__start)
/* EVT15 = _real_start */ /* EVT15 = _real_start */
p0.l = lo(EVT15);
p0.h = hi(EVT15);
p1.l = _real_start; p1.l = _real_start;
p1.h = _real_start; p1.h = _real_start;
[p0] = p1; [p5 + (EVT15 - COREMMR_BASE)] = p1;
csync; csync;
#ifdef CONFIG_EARLY_PRINTK #ifdef CONFIG_EARLY_PRINTK
......
...@@ -274,16 +274,16 @@ ENDPROC(_evt_system_call) ...@@ -274,16 +274,16 @@ ENDPROC(_evt_system_call)
* level to EVT14 to prepare the caller for a normal interrupt * level to EVT14 to prepare the caller for a normal interrupt
* return through RTI. * return through RTI.
* *
* We currently use this facility in two occasions: * We currently use this feature in two occasions:
* *
* - to branch to __ipipe_irq_tail_hook as requested by a high * - before branching to __ipipe_irq_tail_hook as requested by a high
* priority domain after the pipeline delivered an interrupt, * priority domain after the pipeline delivered an interrupt,
* e.g. such as Xenomai, in order to start its rescheduling * e.g. such as Xenomai, in order to start its rescheduling
* procedure, since we may not switch tasks when IRQ levels are * procedure, since we may not switch tasks when IRQ levels are
* nested on the Blackfin, so we have to fake an interrupt return * nested on the Blackfin, so we have to fake an interrupt return
* so that we may reschedule immediately. * so that we may reschedule immediately.
* *
* - to branch to sync_root_irqs, in order to play any interrupt * - before branching to __ipipe_sync_root(), in order to play any interrupt
* pending for the root domain (i.e. the Linux kernel). This lowers * pending for the root domain (i.e. the Linux kernel). This lowers
* the core priority level enough so that Linux IRQ handlers may * the core priority level enough so that Linux IRQ handlers may
* never delay interrupts handled by high priority domains; we defer * never delay interrupts handled by high priority domains; we defer
......
This diff is collapsed.
...@@ -40,6 +40,10 @@ ...@@ -40,6 +40,10 @@
*/ */
struct corelock_slot corelock __attribute__ ((__section__(".l2.bss"))); struct corelock_slot corelock __attribute__ ((__section__(".l2.bss")));
#ifdef CONFIG_ICACHE_FLUSH_L1
unsigned long blackfin_iflush_l1_entry[NR_CPUS];
#endif
void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb, void __cpuinitdata *init_retx_coreb, *init_saved_retx_coreb,
*init_saved_seqstat_coreb, *init_saved_icplb_fault_addr_coreb, *init_saved_seqstat_coreb, *init_saved_icplb_fault_addr_coreb,
*init_saved_dcplb_fault_addr_coreb; *init_saved_dcplb_fault_addr_coreb;
...@@ -105,10 +109,10 @@ static void ipi_flush_icache(void *info) ...@@ -105,10 +109,10 @@ static void ipi_flush_icache(void *info)
struct blackfin_flush_data *fdata = info; struct blackfin_flush_data *fdata = info;
/* Invalidate the memory holding the bounds of the flushed region. */ /* Invalidate the memory holding the bounds of the flushed region. */
blackfin_dcache_invalidate_range((unsigned long)fdata, invalidate_dcache_range((unsigned long)fdata,
(unsigned long)fdata + sizeof(*fdata)); (unsigned long)fdata + sizeof(*fdata));
blackfin_icache_flush_range(fdata->start, fdata->end); flush_icache_range(fdata->start, fdata->end);
} }
static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
...@@ -244,13 +248,14 @@ int smp_call_function(void (*func)(void *info), void *info, int wait) ...@@ -244,13 +248,14 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
{ {
cpumask_t callmap; cpumask_t callmap;
preempt_disable();
callmap = cpu_online_map; callmap = cpu_online_map;
cpu_clear(smp_processor_id(), callmap); cpu_clear(smp_processor_id(), callmap);
if (cpus_empty(callmap)) if (!cpus_empty(callmap))
return 0;
smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait);
preempt_enable();
return 0; return 0;
} }
EXPORT_SYMBOL_GPL(smp_call_function); EXPORT_SYMBOL_GPL(smp_call_function);
...@@ -286,13 +291,14 @@ void smp_send_stop(void) ...@@ -286,13 +291,14 @@ void smp_send_stop(void)
{ {
cpumask_t callmap; cpumask_t callmap;
preempt_disable();
callmap = cpu_online_map; callmap = cpu_online_map;
cpu_clear(smp_processor_id(), callmap); cpu_clear(smp_processor_id(), callmap);
if (cpus_empty(callmap)) if (!cpus_empty(callmap))
return;
smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0); smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0);
preempt_enable();
return; return;
} }
...@@ -361,8 +367,6 @@ void __cpuinit secondary_start_kernel(void) ...@@ -361,8 +367,6 @@ void __cpuinit secondary_start_kernel(void)
*/ */
init_exception_vectors(); init_exception_vectors();
bfin_setup_caches(cpu);
local_irq_disable(); local_irq_disable();
/* Attach the new idle task to the global mm. */ /* Attach the new idle task to the global mm. */
...@@ -381,6 +385,8 @@ void __cpuinit secondary_start_kernel(void) ...@@ -381,6 +385,8 @@ void __cpuinit secondary_start_kernel(void)
local_irq_enable(); local_irq_enable();
bfin_setup_caches(cpu);
/* /*
* Calibrate loops per jiffy value. * Calibrate loops per jiffy value.
* IRQs need to be enabled here - D-cache can be invalidated * IRQs need to be enabled here - D-cache can be invalidated
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment