Commit 6865f0ea authored by Ryusuke Sakato's avatar Ryusuke Sakato Committed by Paul Mundt

sh: Solution Engine 7722 board support.

This adds more full-featured support for the SH7722 Solution Engine.
Previously this was using the generic board, and lacked most of the
peripheral support.
Signed-off-by: default avatarRyusuke Sakato <sakato.ryusuke@renesas.com>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 6b817c03
......@@ -92,6 +92,14 @@ config SH_SOLUTION_ENGINE
Select SolutionEngine if configuring for a Hitachi SH7709
or SH7750 evaluation board.
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
select CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
......
......@@ -88,6 +88,7 @@ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
# Boards
machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x
machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) := se/7722
machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751
machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) := se/7780
machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300
......
#
# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
#
obj-y := setup.o irq.o
/*
* linux/arch/sh/boards/se/7722/irq.c
*
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* Hitachi UL SolutionEngine 7722 Support.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/se7722.h>
#define INTC_INTMSK0 0xFFD00044
#define INTC_INTMSKCLR0 0xFFD00064
static void disable_se7722_irq(unsigned int irq)
{
struct ipr_data *p = get_irq_chip_data(irq);
ctrl_outw( ctrl_inw( p->addr ) | p->priority , p->addr );
}
static void enable_se7722_irq(unsigned int irq)
{
struct ipr_data *p = get_irq_chip_data(irq);
ctrl_outw( ctrl_inw( p->addr ) & ~p->priority , p->addr );
}
static struct irq_chip se7722_irq_chip __read_mostly = {
.name = "SE7722",
.mask = disable_se7722_irq,
.unmask = enable_se7722_irq,
.mask_ack = disable_se7722_irq,
};
static struct ipr_data ipr_irq_table[] = {
/* irq ,idx,sft, priority , addr */
{ MRSHPC_IRQ0 , 0 , 0 , MRSHPC_BIT0 , IRQ01_MASK } ,
{ MRSHPC_IRQ1 , 0 , 0 , MRSHPC_BIT1 , IRQ01_MASK } ,
{ MRSHPC_IRQ2 , 0 , 0 , MRSHPC_BIT2 , IRQ01_MASK } ,
{ MRSHPC_IRQ3 , 0 , 0 , MRSHPC_BIT3 , IRQ01_MASK } ,
{ SMC_IRQ , 0 , 0 , SMC_BIT , IRQ01_MASK } ,
{ EXT_IRQ , 0 , 0 , EXT_BIT , IRQ01_MASK } ,
};
int se7722_irq_demux(int irq)
{
if ((irq == IRQ0_IRQ)||(irq == IRQ1_IRQ)) {
volatile unsigned short intv =
*(volatile unsigned short *)IRQ01_STS;
if (irq == IRQ0_IRQ){
if(intv & SMC_BIT ) {
return SMC_IRQ;
} else if(intv & USB_BIT) {
return USB_IRQ;
} else {
printk("intv =%04x\n", intv);
return SMC_IRQ;
}
} else if(irq == IRQ1_IRQ){
if(intv & MRSHPC_BIT0) {
return MRSHPC_IRQ0;
} else if(intv & MRSHPC_BIT1) {
return MRSHPC_IRQ1;
} else if(intv & MRSHPC_BIT2) {
return MRSHPC_IRQ2;
} else if(intv & MRSHPC_BIT3) {
return MRSHPC_IRQ3;
} else {
printk("BIT_EXTENTION =%04x\n", intv);
return EXT_IRQ;
}
}
}
return irq;
}
/*
* Initialize IRQ setting
*/
void __init init_se7722_IRQ(void)
{
int i = 0;
ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
ctrl_outl((3 << ((7 - 0) * 4))|(3 << ((7 - 1) * 4)), INTC_INTPRI0); /* irq0 pri=3,irq1,pri=3 */
ctrl_outw((2 << ((7 - 0) * 2))|(2 << ((7 - 1) * 2)), INTC_ICR1); /* irq0,1 low-level irq */
for (i = 0; i < ARRAY_SIZE(ipr_irq_table); i++) {
disable_irq_nosync(ipr_irq_table[i].irq);
set_irq_chip_and_handler_name( ipr_irq_table[i].irq, &se7722_irq_chip,
handle_level_irq, "level");
set_irq_chip_data( ipr_irq_table[i].irq, &ipr_irq_table[i] );
disable_se7722_irq(ipr_irq_table[i].irq);
}
}
/*
* linux/arch/sh/boards/se/7722/setup.c
*
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* Hitachi UL SolutionEngine 7722 Support.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pata_platform.h>
#include <asm/machvec.h>
#include <asm/se7722.h>
#include <asm/io.h>
/* Heartbeat */
static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = heartbeat_bit_pos,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
/* SMC91x */
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "smc91x-regs" ,
.start = PA_LAN + 0x300,
.end = PA_LAN + 0x300 + 0x10 ,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = SMC_IRQ,
.end = SMC_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_eth_device = {
.name = "smc91x",
.id = 0,
.dev = {
.dma_mask = NULL, /* don't use dma */
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
.resource = smc91x_eth_resources,
};
static struct resource cf_ide_resources[] = {
[0] = {
.start = PA_MRSHPC_IO + 0x1f0,
.end = PA_MRSHPC_IO + 0x1f0 + 8 ,
.flags = IORESOURCE_IO,
},
[1] = {
.start = PA_MRSHPC_IO + 0x1f0 + 0x206,
.end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
.flags = IORESOURCE_IO,
},
[2] = {
.start = MRSHPC_IRQ0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device cf_ide_device = {
.name = "pata_platform",
.id = -1,
.num_resources = ARRAY_SIZE(cf_ide_resources),
.resource = cf_ide_resources,
};
static struct platform_device *se7722_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
&cf_ide_device,
};
static int __init se7722_devices_setup(void)
{
return platform_add_devices(se7722_devices,
ARRAY_SIZE(se7722_devices));
}
device_initcall(se7722_devices_setup);
static void __init se7722_setup(char **cmdline_p)
{
ctrl_outw(0x010D, FPGA_OUT); /* FPGA */
ctrl_outl(0x00051001, MSTPCR0);
ctrl_outl(0x00000000, MSTPCR1);
/* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */
ctrl_outl(0xffffbfC0, MSTPCR2);
ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
/* LCDC I/O */
ctrl_outw(0x0020, PORT_PSELD);
/* SIOF1*/
ctrl_outw(0x0003, PORT_PSELB);
ctrl_outw(0xe000, PORT_PSELC);
ctrl_outw(0x0000, PORT_PKCR);
/* LCDC */
ctrl_outw(0x4020, PORT_PHCR);
ctrl_outw(0x0000, PORT_PLCR);
ctrl_outw(0x0000, PORT_PMCR);
ctrl_outw(0x0002, PORT_PRCR);
ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */
/* KEYSC */
ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
ctrl_outw(0x0000, PORT_PYCR);
ctrl_outw(0x0000, PORT_PZCR);
}
/*
* The Machine Vector
*/
struct sh_machine_vector mv_se7722 __initmv = {
.mv_name = "Solution Engine 7722" ,
.mv_setup = se7722_setup ,
.mv_nr_irqs = 109 ,
.mv_init_irq = init_se7722_IRQ,
.mv_irq_demux = se7722_irq_demux,
};
ALIAS_MV(se7722)
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc4
# Wed Mar 28 16:22:40 2007
# Linux kernel version: 2.6.21-rc7
# Fri Apr 27 16:30:30 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
......@@ -35,24 +35,24 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
......@@ -103,8 +103,11 @@ CONFIG_DEFAULT_IOSCHED="noop"
#
# System type
#
CONFIG_SOLUTION_ENGINE=y
# CONFIG_SH_SOLUTION_ENGINE is not set
CONFIG_SH_7722_SOLUTION_ENGINE=y
# CONFIG_SH_7751_SOLUTION_ENGINE is not set
# CONFIG_SH_7780_SOLUTION_ENGINE is not set
# CONFIG_SH_7300_SOLUTION_ENGINE is not set
# CONFIG_SH_7343_SOLUTION_ENGINE is not set
# CONFIG_SH_73180_SOLUTION_ENGINE is not set
......@@ -127,7 +130,7 @@ CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_SH_7206_SOLUTION_ENGINE is not set
# CONFIG_SH_7619_SOLUTION_ENGINE is not set
# CONFIG_SH_LBOX_RE2 is not set
CONFIG_SH_UNKNOWN=y
# CONFIG_SH_UNKNOWN is not set
#
# Processor selection
......@@ -229,7 +232,10 @@ CONFIG_ZONE_DMA_FLAG=0
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
# CONFIG_CF_ENABLER is not set
CONFIG_CF_ENABLER=y
# CONFIG_CF_AREA5 is not set
CONFIG_CF_AREA6=y
CONFIG_CF_BASE_ADDR=0xb8000000
#
# Processor features
......@@ -251,7 +257,7 @@ CONFIG_CPU_HAS_PTEA=y
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
CONFIG_NO_IDLE_HZ=y
CONFIG_SH_PCLK_FREQ=32000000
CONFIG_SH_PCLK_FREQ=33333333
#
# CPU Frequency scaling
......@@ -271,8 +277,8 @@ CONFIG_SH_PCLK_FREQ=32000000
#
# Additional SuperH Device Drivers
#
# CONFIG_HEARTBEAT is not set
CONFIG_PUSH_SWITCH=y
CONFIG_HEARTBEAT=y
# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
......@@ -283,6 +289,7 @@ CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
......@@ -295,8 +302,7 @@ CONFIG_PREEMPT_BKL=y
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200"
# CONFIG_CMDLINE_BOOL is not set
#
# Bus options
......@@ -327,7 +333,88 @@ CONFIG_BINFMT_ELF=y
#
# Networking
#
# CONFIG_NET is not set
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
......@@ -338,14 +425,13 @@ CONFIG_BINFMT_ELF=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
......@@ -367,11 +453,13 @@ CONFIG_FW_LOADER=m
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
......@@ -398,7 +486,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
......@@ -414,12 +502,14 @@ CONFIG_CHR_DEV_SG=m
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
#
......@@ -447,9 +537,60 @@ CONFIG_PATA_PLATFORM=y
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -582,6 +723,7 @@ CONFIG_HWMON=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
......@@ -592,20 +734,7 @@ CONFIG_HWMON=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_OBSOLETE_OSS is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND is not set
#
# HID Devices
......@@ -722,7 +851,8 @@ CONFIG_FS_MBCACHE=y
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
......@@ -730,7 +860,7 @@ CONFIG_INOTIFY_USER=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
......@@ -741,14 +871,9 @@ CONFIG_FUSE_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
......@@ -762,7 +887,7 @@ CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -781,6 +906,18 @@ CONFIG_CONFIGFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
......@@ -790,95 +927,33 @@ CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_NLS is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_SH_KGDB is not set
#
......@@ -890,47 +965,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO is not set
#
# Library routines
......
......@@ -29,7 +29,7 @@
* 0xB8001000 : Common Memory
* 0xBA000000 : I/O
*/
#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
#if defined(CONFIG_CPU_SH4)
/* SH4 can't access PCMCIA interface through P2 area.
* we must remap it with appropreate attribute bit of the page set.
* this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
......@@ -71,7 +71,7 @@ static int __init cf_init_default(void)
/* You must have enabled the card, and set the level interrupt
* before reaching this point. Possibly in boot ROM or boot loader.
*/
#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
#if defined(CONFIG_CPU_SH4)
allocate_cf_area();
#endif
#if defined(CONFIG_SH_UNKNOWN)
......@@ -84,15 +84,25 @@ static int __init cf_init_default(void)
#if defined(CONFIG_SH_SOLUTION_ENGINE)
#include <asm/se.h>
#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
#include <asm/se7722.h>
#endif
/*
* SolutionEngine
* SolutionEngine Seriese
*
* about MS770xSE
* 0xB8400000 : Common Memory
* 0xB8500000 : Attribute
* 0xB8600000 : I/O
*
* about MS7722SE
* 0xB0400000 : Common Memory
* 0xB0500000 : Attribute
* 0xB0600000 : I/O
*/
#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE)
static int __init cf_init_se(void)
{
if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
......@@ -109,7 +119,7 @@ static int __init cf_init_se(void)
* flag == COMMON/ATTRIBUTE/IO
*/
/* common window open */
ctrl_outw(0x8a84, MRSHPC_MW0CR1);/* window 0xb8400000 */
ctrl_outw(0x8a84, MRSHPC_MW0CR1);
if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
/* common mode & bus width 16bit SWAP = 1*/
ctrl_outw(0x0b00, MRSHPC_MW0CR2);
......@@ -118,7 +128,7 @@ static int __init cf_init_se(void)
ctrl_outw(0x0300, MRSHPC_MW0CR2);
/* attribute window open */
ctrl_outw(0x8a85, MRSHPC_MW1CR1);/* window 0xb8500000 */
ctrl_outw(0x8a85, MRSHPC_MW1CR1);
if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
/* attribute mode & bus width 16bit SWAP = 1*/
ctrl_outw(0x0a00, MRSHPC_MW1CR2);
......@@ -127,7 +137,7 @@ static int __init cf_init_se(void)
ctrl_outw(0x0200, MRSHPC_MW1CR2);
/* I/O window open */
ctrl_outw(0x8a86, MRSHPC_IOWCR1);/* I/O window 0xb8600000 */
ctrl_outw(0x8a86, MRSHPC_IOWCR1);
ctrl_outw(0x0008, MRSHPC_CDCR); /* I/O card mode */
if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
......@@ -143,10 +153,10 @@ static int __init cf_init_se(void)
int __init cf_init(void)
{
#if defined(CONFIG_SH_SOLUTION_ENGINE)
if (MACH_SE)
if( mach_is_se() || mach_is_7722se() ){
return cf_init_se();
#endif
}
return cf_init_default();
}
......
#ifndef __ASM_SH_SE7722_H
#define __ASM_SH_SE7722_H
/*
* linux/include/asm-sh/se7722.h
*
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* Hitachi UL SolutionEngine 7722 Support.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <asm/addrspace.h>
/* Box specific addresses. */
#define SE_AREA0_WIDTH 4 /* Area0: 32bit */
#define PA_ROM 0xa0000000 /* EPROM */
#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
#define PA_FROM 0xa1000000 /* Flash-ROM */
#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
#define PA_EXT1 0xa4000000
#define PA_EXT1_SIZE 0x04000000
#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */
#define PA_SDRAM_SIZE 0x04000000
#define PA_EXT4 0xb0000000
#define PA_EXT4_SIZE 0x04000000
#define PA_PERIPHERAL 0xB0000000
#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */
#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */
#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */
#define MRSHPC_OPTION (PA_MRSHPC + 6)
#define MRSHPC_CSR (PA_MRSHPC + 8)
#define MRSHPC_ISR (PA_MRSHPC + 10)
#define MRSHPC_ICR (PA_MRSHPC + 12)
#define MRSHPC_CPWCR (PA_MRSHPC + 14)
#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
#define MRSHPC_CDCR (PA_MRSHPC + 28)
#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */
#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */
#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */
/* GPIO */
#define MSTPCR0 0xA4150030UL
#define MSTPCR1 0xA4150034UL
#define MSTPCR2 0xA4150038UL
#define FPGA_IN 0xb1840000UL
#define FPGA_OUT 0xb1840004UL
#define PORT_PECR 0xA4050108UL
#define PORT_PJCR 0xA4050110UL
#define PORT_PSELD 0xA4050154UL
#define PORT_PSELB 0xA4050150UL
#define PORT_PSELC 0xA4050152UL
#define PORT_PKCR 0xA4050112UL
#define PORT_PHCR 0xA405010EUL
#define PORT_PLCR 0xA4050114UL
#define PORT_PMCR 0xA4050116UL
#define PORT_PRCR 0xA405011CUL
#define PORT_PXCR 0xA4050148UL
#define PORT_PSELA 0xA405014EUL
#define PORT_PYCR 0xA405014AUL
#define PORT_PZCR 0xA405014CUL
/* IRQ */
#define IRQ0_IRQ 32
#define IRQ1_IRQ 33
#define INTC_ICR0 0xA4140000UL
#define INTC_ICR1 0xA414001CUL
#define INTMSK0 0xa4140044
#define INTMSKCLR0 0xa4140064
#define INTC_INTPRI0 0xa4140010
#define IRQ01_MODE 0xb1800000
#define IRQ01_STS 0xb1800004
#define IRQ01_MASK 0xb1800008
#define EXT_BIT (0x3fc0) /* SH IRQ1 */
#define MRSHPC_BIT0 (0x0004) /* SH IRQ1 */
#define MRSHPC_BIT1 (0x0008) /* SH IRQ1 */
#define MRSHPC_BIT2 (0x0010) /* SH IRQ1 */
#define MRSHPC_BIT3 (0x0020) /* SH IRQ1 */
#define SMC_BIT (0x0002) /* SH IRQ0 */
#define USB_BIT (0x0001) /* SH IRQ0 */
#define MRSHPC_IRQ3 11
#define MRSHPC_IRQ2 12
#define MRSHPC_IRQ1 13
#define MRSHPC_IRQ0 14
#define SMC_IRQ 10
#define EXT_IRQ 5
#define USB_IRQ 6
/* arch/sh/boards/se/7722/irq.c */
void init_se7722_IRQ(void);
int se7722_irq_demux(int);
#define __IO_PREFIX se7722
#include <asm/io_generic.h>
#endif /* __ASM_SH_SE7722_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment