Commit 68817cdb authored by Pierre-Louis Bossart's avatar Pierre-Louis Bossart Committed by Mark Brown

ASoC: Intel: bytcr_rt5640: quirk for mono speaker

Some Baytrail devices only have a mono speaker, add quirk and enable
it for T100TAF.
Signed-off-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 73442e3c
......@@ -40,6 +40,7 @@ enum {
#define BYT_RT5640_MAP(quirk) ((quirk) & 0xff)
#define BYT_RT5640_DMIC_EN BIT(16)
#define BYT_RT5640_MONO_SPEAKER BIT(17)
static unsigned long byt_rt5640_quirk = BYT_RT5640_DMIC1_MAP |
BYT_RT5640_DMIC_EN;
......@@ -63,10 +64,6 @@ static const struct snd_soc_dapm_route byt_rt5640_audio_map[] = {
{"IN2P", NULL, "Headset Mic"},
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
{"Speaker", NULL, "SPOLP"},
{"Speaker", NULL, "SPOLN"},
{"Speaker", NULL, "SPORP"},
{"Speaker", NULL, "SPORN"},
};
static const struct snd_soc_dapm_route byt_rt5640_intmic_dmic1_map[] = {
......@@ -82,6 +79,18 @@ static const struct snd_soc_dapm_route byt_rt5640_intmic_in1_map[] = {
{"IN1P", NULL, "Internal Mic"},
};
static const struct snd_soc_dapm_route byt_rt5640_stereo_spk_map[] = {
{"Speaker", NULL, "SPOLP"},
{"Speaker", NULL, "SPOLN"},
{"Speaker", NULL, "SPORP"},
{"Speaker", NULL, "SPORN"},
};
static const struct snd_soc_dapm_route byt_rt5640_mono_spk_map[] = {
{"Speaker", NULL, "SPOLP"},
{"Speaker", NULL, "SPOLN"},
};
static const struct snd_kcontrol_new byt_rt5640_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
......@@ -138,7 +147,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"),
},
.driver_data = (unsigned long *)BYT_RT5640_IN1_MAP,
.driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP |
BYT_RT5640_MONO_SPEAKER
),
},
{
.callback = byt_rt5640_quirk_cb,
......@@ -200,6 +211,18 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
if (ret)
return ret;
if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
ret = snd_soc_dapm_add_routes(&card->dapm,
byt_rt5640_mono_spk_map,
ARRAY_SIZE(byt_rt5640_mono_spk_map));
} else {
ret = snd_soc_dapm_add_routes(&card->dapm,
byt_rt5640_stereo_spk_map,
ARRAY_SIZE(byt_rt5640_stereo_spk_map));
}
if (ret)
return ret;
if (byt_rt5640_quirk & BYT_RT5640_DMIC_EN) {
ret = rt5640_dmic_enable(codec, 0, 0);
if (ret)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment