Commit 689f891c authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull some more input subsystem updates from Dmitry Torokhov:
 "An update to the ALPS driver to support the V8 protocol with
  touchstick, a change for i8042 to skip selftest on many Asus laptops
  which helps to keep their touchpads working after resume, and a couple
  other driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - skip selftest on ASUS laptops
  Input: melfas_mip4 - add ic_name sysfs attribute
  Input: melfas_mip4 - add maintainer information
  Input: melfas_mip4 - add devicetree binding documentations
  Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled
  Input: synaptics-rmi4 - fix error handling in I2C transport driver
  Input: synaptics-rmi4 - fix error handling in SPI transport driver
  Input: ALPS - add V8 protocol documentation
  Input: ALPS - set DualPoint flag for 74 03 28 devices
  Input: ALPS - allow touchsticks to report pressure
  Input: ALPS - handle 0-pressure 1F events
  Input: ALPS - add touchstick support for SS5 hardware
  Input: elantech - force needed quirks on Fujitsu H760
  Input: elantech - fix Lenovo version typo
parents 8b70f716 1134ca26
* MELFAS MIP4 Touchscreen
Required properties:
- compatible: must be "melfas,mip4_ts"
- reg: I2C slave address of the chip (0x48 or 0x34)
- interrupt-parent: interrupt controller to which the chip is connected
- interrupts: interrupt to which the chip is connected
Optional properties:
- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip
Example:
i2c@00000000 {
touchscreen: melfas_mip4@48 {
compatible = "melfas,mip4_ts";
reg = <0x48>;
interrupt-parent = <&gpio>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
};
......@@ -163,6 +163,7 @@ maxim Maxim Integrated Products
meas Measurement Specialties
mediatek MediaTek Inc.
melexis Melexis N.V.
melfas MELFAS Inc.
merrii Merrii Technology Co., Ltd.
micrel Micrel Inc.
microchip Microchip Technology Inc.
......
......@@ -319,3 +319,60 @@ For touchpad packet, the format is:
otherwise byte 0 bit 4 must be set and byte 0/4/5 are
in NEW fmt
F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
ALPS Absolute Mode - Protocol Version 8
---------------------------------------
Spoken by SS4 (73 03 14) and SS5 (73 03 28) hardware.
The packet type is given by the APD field, bits 4-5 of byte 3.
Touchpad packet (APD = 0x2):
b7 b6 b5 b4 b3 b2 b1 b0
byte 0: SWM SWR SWL 1 1 0 0 X7
byte 1: 0 X6 X5 X4 X3 X2 X1 X0
byte 2: 0 Y6 Y5 Y4 Y3 Y2 Y1 Y0
byte 3: 0 T&P 1 0 1 0 0 Y7
byte 4: 0 Z6 Z5 Z4 Z3 Z2 Z1 Z0
byte 5: 0 0 0 0 0 0 0 0
SWM, SWR, SWL: Middle, Right, and Left button states
Touchpad 1 Finger packet (APD = 0x0):
b7 b6 b5 b4 b3 b2 b1 b0
byte 0: SWM SWR SWL 1 1 X2 X1 X0
byte 1: X9 X8 X7 1 X6 X5 X4 X3
byte 2: 0 X11 X10 LFB Y3 Y2 Y1 Y0
byte 3: Y5 Y4 0 0 1 TAPF2 TAPF1 TAPF0
byte 4: Zv7 Y11 Y10 1 Y9 Y8 Y7 Y6
byte 5: Zv6 Zv5 Zv4 0 Zv3 Zv2 Zv1 Zv0
TAPF: ???
LFB: ???
Touchpad 2 Finger packet (APD = 0x1):
b7 b6 b5 b4 b3 b2 b1 b0
byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4
byte 1: AX11 AX10 AX9 AX8 AX7 AZ1 AY4 AZ0
byte 2: AY11 AY10 AY9 CONT AY8 AY7 AY6 AY5
byte 3: 0 0 0 1 1 BX6 BX5 BX4
byte 4: BX11 BX10 BX9 BX8 BX7 BZ1 BY4 BZ0
byte 5: BY11 BY10 BY9 0 BY8 BY7 BY5 BY5
CONT: A 3-or-4 Finger packet is to follow
Touchpad 3-or-4 Finger packet (APD = 0x3):
b7 b6 b5 b4 b3 b2 b1 b0
byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4
byte 1: AX11 AX10 AX9 AX8 AX7 AZ1 AY4 AZ0
byte 2: AY11 AY10 AY9 OVF AY8 AY7 AY6 AY5
byte 3: 0 0 1 1 1 BX6 BX5 BX4
byte 4: BX11 BX10 BX9 BX8 BX7 BZ1 BY4 BZ0
byte 5: BY11 BY10 BY9 0 BY8 BY7 BY5 BY5
OVF: 5th finger detected
......@@ -1511,7 +1511,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
controllers
i8042.notimeout [HW] Ignore timeout condition signalled by controller
i8042.reset [HW] Reset the controller during init and cleanup
i8042.reset [HW] Reset the controller during init, cleanup and
suspend-to-ram transitions, only during s2r
transitions, or never reset
Format: { 1 | Y | y | 0 | N | n }
1, Y, y: always reset controller
0, N, n: don't ever reset controller
Default: only on s2r transitions on x86; most other
architectures force reset to be always executed
i8042.unlock [HW] Unlock (ignore) the keylock
i8042.kbdreset [HW] Reset device connected to KBD port
......
......@@ -7829,6 +7829,13 @@ F: Documentation/scsi/megaraid.txt
F: drivers/scsi/megaraid.*
F: drivers/scsi/megaraid/
MELFAS MIP4 TOUCHSCREEN DRIVER
M: Sangwon Jee <jeesw@melfas.com>
W: http://www.melfas.com
S: Supported
F: drivers/input/touchscreen/melfas_mip4.c
F: Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
MELLANOX ETHERNET DRIVER (mlx4_en)
M: Tariq Toukan <tariqt@mellanox.com>
L: netdev@vger.kernel.org
......
......@@ -103,6 +103,7 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
6-byte ALPS packet */
#define ALPS_STICK_BITS 0x100 /* separate stick button bits */
#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */
#define ALPS_DUALPOINT_WITH_PRESSURE 0x400 /* device can report trackpoint pressure */
static const struct alps_model_info alps_model_data[] = {
{ { 0x32, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Toshiba Salellite Pro M10 */
......@@ -1156,15 +1157,28 @@ static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte)
{
unsigned char pkt_id = SS4_PACKET_ID_IDLE;
switch (byte[3] & 0x30) {
case 0x00:
if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 &&
(byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) {
(byte[3] & 0x88) == 0x08 && byte[4] == 0x10 &&
byte[5] == 0x00) {
pkt_id = SS4_PACKET_ID_IDLE;
} else if (!(byte[3] & 0x10)) {
} else {
pkt_id = SS4_PACKET_ID_ONE;
} else if (!(byte[3] & 0x20)) {
}
break;
case 0x10:
/* two-finger finger positions */
pkt_id = SS4_PACKET_ID_TWO;
} else {
break;
case 0x20:
/* stick pointer */
pkt_id = SS4_PACKET_ID_STICK;
break;
case 0x30:
/* third and fourth finger positions */
pkt_id = SS4_PACKET_ID_MULTI;
break;
}
return pkt_id;
......@@ -1185,7 +1199,13 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
f->mt[0].x = SS4_1F_X_V2(p);
f->mt[0].y = SS4_1F_Y_V2(p);
f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f;
f->fingers = 1;
/*
* When a button is held the device will give us events
* with x, y, and pressure of 0. This causes annoying jumps
* if a touch is released while the button is held.
* Handle this by claiming zero contacts.
*/
f->fingers = f->pressure > 0 ? 1 : 0;
f->first_mp = 0;
f->is_mp = 0;
break;
......@@ -1246,17 +1266,41 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
}
break;
case SS4_PACKET_ID_STICK:
if (!(priv->flags & ALPS_DUALPOINT)) {
psmouse_warn(psmouse,
"Rejected trackstick packet from non DualPoint device");
} else {
int x = (s8)(((p[0] & 1) << 7) | (p[1] & 0x7f));
int y = (s8)(((p[3] & 1) << 7) | (p[2] & 0x7f));
int pressure = (s8)(p[4] & 0x7f);
input_report_rel(priv->dev2, REL_X, x);
input_report_rel(priv->dev2, REL_Y, -y);
input_report_abs(priv->dev2, ABS_PRESSURE, pressure);
}
break;
case SS4_PACKET_ID_IDLE:
default:
memset(f, 0, sizeof(struct alps_fields));
break;
}
/* handle buttons */
if (pkt_id == SS4_PACKET_ID_STICK) {
f->ts_left = !!(SS4_BTN_V2(p) & 0x01);
if (!(priv->flags & ALPS_BUTTONPAD)) {
f->ts_right = !!(SS4_BTN_V2(p) & 0x02);
f->ts_middle = !!(SS4_BTN_V2(p) & 0x04);
}
} else {
f->left = !!(SS4_BTN_V2(p) & 0x01);
if (!(priv->flags & ALPS_BUTTONPAD)) {
f->right = !!(SS4_BTN_V2(p) & 0x02);
f->middle = !!(SS4_BTN_V2(p) & 0x04);
}
}
return 0;
}
......@@ -1266,6 +1310,7 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
struct alps_data *priv = psmouse->private;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
struct input_dev *dev2 = priv->dev2;
struct alps_fields *f = &priv->f;
memset(f, 0, sizeof(struct alps_fields));
......@@ -1311,6 +1356,13 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
input_report_abs(dev, ABS_PRESSURE, f->pressure);
input_sync(dev);
if (priv->flags & ALPS_DUALPOINT) {
input_report_key(dev2, BTN_LEFT, f->ts_left);
input_report_key(dev2, BTN_RIGHT, f->ts_right);
input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
input_sync(dev2);
}
}
static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse)
......@@ -2695,6 +2747,10 @@ static int alps_set_protocol(struct psmouse *psmouse,
if (alps_set_defaults_ss4_v2(psmouse, priv))
return -EIO;
if (priv->fw_ver[1] == 0x1)
priv->flags |= ALPS_DUALPOINT |
ALPS_DUALPOINT_WITH_PRESSURE;
break;
}
......@@ -2767,6 +2823,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
} else if (e7[0] == 0x73 && e7[1] == 0x03 &&
e7[2] == 0x14 && ec[1] == 0x02) {
protocol = &alps_v8_protocol_data;
} else if (e7[0] == 0x73 && e7[1] == 0x03 &&
e7[2] == 0x28 && ec[1] == 0x01) {
protocol = &alps_v8_protocol_data;
} else {
psmouse_dbg(psmouse,
"Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec);
......@@ -2949,6 +3008,10 @@ int alps_init(struct psmouse *psmouse)
input_set_capability(dev2, EV_REL, REL_X);
input_set_capability(dev2, EV_REL, REL_Y);
if (priv->flags & ALPS_DUALPOINT_WITH_PRESSURE) {
input_set_capability(dev2, EV_ABS, ABS_PRESSURE);
input_set_abs_params(dev2, ABS_PRESSURE, 0, 127, 0, 0);
}
input_set_capability(dev2, EV_KEY, BTN_LEFT);
input_set_capability(dev2, EV_KEY, BTN_RIGHT);
input_set_capability(dev2, EV_KEY, BTN_MIDDLE);
......
......@@ -37,12 +37,14 @@
* or there's button activities.
* SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
* SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
* SS4_PACKET_ID_STICK: A stick pointer packet
*/
enum SS4_PACKET_ID {
SS4_PACKET_ID_IDLE = 0,
SS4_PACKET_ID_ONE,
SS4_PACKET_ID_TWO,
SS4_PACKET_ID_MULTI,
SS4_PACKET_ID_STICK,
};
#define SS4_COUNT_PER_ELECTRODE 256
......
......@@ -1134,7 +1134,7 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
* System76 Pangolin 0x250f01 ? 2 hw buttons
* (*) + 3 trackpoint buttons
* (**) + 0 trackpoint buttons
* Note: Lenovo L430 and Lenovo L430 have the same fw_version/caps
* Note: Lenovo L430 and Lenovo L530 have the same fw_version/caps
*/
static void elantech_set_buttonpad_prop(struct psmouse *psmouse)
{
......@@ -1159,6 +1159,13 @@ static const struct dmi_system_id elantech_dmi_has_middle_button[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
},
},
{
/* Fujitsu H760 also has a middle button */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
},
},
#endif
{ }
};
......@@ -1503,10 +1510,10 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
},
},
{
/* Fujitsu LIFEBOOK E554 does not work with crc_enabled == 0 */
/* Fujitsu H760 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"),
DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
},
},
{
......@@ -1516,6 +1523,20 @@ static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"),
},
},
{
/* Fujitsu LIFEBOOK E554 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"),
},
},
{
/* Fujitsu LIFEBOOK E556 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E556"),
},
},
{
/* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */
.matches = {
......
......@@ -221,6 +221,21 @@ static const struct of_device_id rmi_i2c_of_match[] = {
MODULE_DEVICE_TABLE(of, rmi_i2c_of_match);
#endif
static void rmi_i2c_regulator_bulk_disable(void *data)
{
struct rmi_i2c_xport *rmi_i2c = data;
regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
rmi_i2c->supplies);
}
static void rmi_i2c_unregister_transport(void *data)
{
struct rmi_i2c_xport *rmi_i2c = data;
rmi_unregister_transport_device(&rmi_i2c->xport);
}
static int rmi_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -264,6 +279,12 @@ static int rmi_i2c_probe(struct i2c_client *client,
if (retval < 0)
return retval;
retval = devm_add_action_or_reset(&client->dev,
rmi_i2c_regulator_bulk_disable,
rmi_i2c);
if (retval)
return retval;
of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms",
&rmi_i2c->startup_delay);
......@@ -294,6 +315,11 @@ static int rmi_i2c_probe(struct i2c_client *client,
client->addr);
return retval;
}
retval = devm_add_action_or_reset(&client->dev,
rmi_i2c_unregister_transport,
rmi_i2c);
if (retval)
return retval;
retval = rmi_i2c_init_irq(client);
if (retval < 0)
......@@ -304,17 +330,6 @@ static int rmi_i2c_probe(struct i2c_client *client,
return 0;
}
static int rmi_i2c_remove(struct i2c_client *client)
{
struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
rmi_unregister_transport_device(&rmi_i2c->xport);
regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
rmi_i2c->supplies);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int rmi_i2c_suspend(struct device *dev)
{
......@@ -431,7 +446,6 @@ static struct i2c_driver rmi_i2c_driver = {
},
.id_table = rmi_id,
.probe = rmi_i2c_probe,
.remove = rmi_i2c_remove,
};
module_i2c_driver(rmi_i2c_driver);
......
......@@ -396,6 +396,13 @@ static inline int rmi_spi_of_probe(struct spi_device *spi,
}
#endif
static void rmi_spi_unregister_transport(void *data)
{
struct rmi_spi_xport *rmi_spi = data;
rmi_unregister_transport_device(&rmi_spi->xport);
}
static int rmi_spi_probe(struct spi_device *spi)
{
struct rmi_spi_xport *rmi_spi;
......@@ -464,6 +471,11 @@ static int rmi_spi_probe(struct spi_device *spi)
dev_err(&spi->dev, "failed to register transport.\n");
return retval;
}
retval = devm_add_action_or_reset(&spi->dev,
rmi_spi_unregister_transport,
rmi_spi);
if (retval)
return retval;
retval = rmi_spi_init_irq(spi);
if (retval < 0)
......@@ -473,15 +485,6 @@ static int rmi_spi_probe(struct spi_device *spi)
return 0;
}
static int rmi_spi_remove(struct spi_device *spi)
{
struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
rmi_unregister_transport_device(&rmi_spi->xport);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int rmi_spi_suspend(struct device *dev)
{
......@@ -577,7 +580,6 @@ static struct spi_driver rmi_spi_driver = {
},
.id_table = rmi_id,
.probe = rmi_spi_probe,
.remove = rmi_spi_remove,
};
module_spi_driver(rmi_spi_driver);
......
......@@ -81,7 +81,7 @@ static inline int i8042_platform_init(void)
return -EBUSY;
#endif
i8042_reset = 1;
i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
......
......@@ -61,7 +61,7 @@ static inline int i8042_platform_init(void)
return -EBUSY;
#endif
i8042_reset = 1;
i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
......
......@@ -44,7 +44,7 @@ static inline void i8042_write_command(int val)
static inline int i8042_platform_init(void)
{
i8042_reset = 1;
i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
......
......@@ -130,7 +130,7 @@ static int __init i8042_platform_init(void)
}
}
i8042_reset = 1;
i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
......
......@@ -61,7 +61,7 @@ static inline int i8042_platform_init(void)
if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
return -EBUSY;
i8042_reset = 1;
i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
......
......@@ -510,6 +510,90 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
{ }
};
/*
* On some Asus laptops, just running self tests cause problems.
*/
static const struct dmi_system_id i8042_dmi_noselftest_table[] = {
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "A455LD"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "K401LB"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "K501LB"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "K501LX"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "R409L"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "V502LX"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X302LA"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X450LD"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X455LAB"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X455LDB"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "X455LF"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "Z450LA"),
},
},
{ }
};
static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
{
/* MSI Wind U-100 */
......@@ -1072,12 +1156,18 @@ static int __init i8042_platform_init(void)
return retval;
#if defined(__ia64__)
i8042_reset = true;
i8042_reset = I8042_RESET_ALWAYS;
#endif
#ifdef CONFIG_X86
/* Honor module parameter when value is not default */
if (i8042_reset == I8042_RESET_DEFAULT) {
if (dmi_check_system(i8042_dmi_reset_table))
i8042_reset = true;
i8042_reset = I8042_RESET_ALWAYS;
if (dmi_check_system(i8042_dmi_noselftest_table))
i8042_reset = I8042_RESET_NEVER;
}
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = true;
......
......@@ -48,9 +48,39 @@ static bool i8042_unlock;
module_param_named(unlock, i8042_unlock, bool, 0);
MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
static bool i8042_reset;
module_param_named(reset, i8042_reset, bool, 0);
MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
enum i8042_controller_reset_mode {
I8042_RESET_NEVER,
I8042_RESET_ALWAYS,
I8042_RESET_ON_S2RAM,
#define I8042_RESET_DEFAULT I8042_RESET_ON_S2RAM
};
static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT;
static int i8042_set_reset(const char *val, const struct kernel_param *kp)
{
enum i8042_controller_reset_mode *arg = kp->arg;
int error;
bool reset;
if (val) {
error = kstrtobool(val, &reset);
if (error)
return error;
} else {
reset = true;
}
*arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER;
return 0;
}
static const struct kernel_param_ops param_ops_reset_param = {
.flags = KERNEL_PARAM_OPS_FL_NOARG,
.set = i8042_set_reset,
};
#define param_check_reset_param(name, p) \
__param_check(name, p, enum i8042_controller_reset_mode)
module_param_named(reset, i8042_reset, reset_param, 0);
MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both");
static bool i8042_direct;
module_param_named(direct, i8042_direct, bool, 0);
......@@ -1019,7 +1049,7 @@ static int i8042_controller_init(void)
* Reset the controller and reset CRT to the original value set by BIOS.
*/
static void i8042_controller_reset(bool force_reset)
static void i8042_controller_reset(bool s2r_wants_reset)
{
i8042_flush();
......@@ -1044,8 +1074,10 @@ static void i8042_controller_reset(bool force_reset)
* Reset the controller if requested.
*/
if (i8042_reset || force_reset)
if (i8042_reset == I8042_RESET_ALWAYS ||
(i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
i8042_controller_selftest();
}
/*
* Restore the original control register setting.
......@@ -1110,7 +1142,7 @@ static void i8042_dritek_enable(void)
* before suspending.
*/
static int i8042_controller_resume(bool force_reset)
static int i8042_controller_resume(bool s2r_wants_reset)
{
int error;
......@@ -1118,7 +1150,8 @@ static int i8042_controller_resume(bool force_reset)
if (error)
return error;
if (i8042_reset || force_reset) {
if (i8042_reset == I8042_RESET_ALWAYS ||
(i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
error = i8042_controller_selftest();
if (error)
return error;
......@@ -1195,7 +1228,7 @@ static int i8042_pm_resume_noirq(struct device *dev)
static int i8042_pm_resume(struct device *dev)
{
bool force_reset;
bool want_reset;
int i;
for (i = 0; i < I8042_NUM_PORTS; i++) {
......@@ -1218,9 +1251,9 @@ static int i8042_pm_resume(struct device *dev)
* off control to the platform firmware, otherwise we can simply restore
* the mode.
*/
force_reset = pm_resume_via_firmware();
want_reset = pm_resume_via_firmware();
return i8042_controller_resume(force_reset);
return i8042_controller_resume(want_reset);
}
static int i8042_pm_thaw(struct device *dev)
......@@ -1482,7 +1515,7 @@ static int __init i8042_probe(struct platform_device *dev)
i8042_platform_device = dev;
if (i8042_reset) {
if (i8042_reset == I8042_RESET_ALWAYS) {
error = i8042_controller_selftest();
if (error)
return error;
......
......@@ -157,6 +157,7 @@ struct mip4_ts {
char phys[32];
char product_name[16];
char ic_name[4];
unsigned int max_x;
unsigned int max_y;
......@@ -263,6 +264,18 @@ static int mip4_query_device(struct mip4_ts *ts)
dev_dbg(&ts->client->dev, "product name: %.*s\n",
(int)sizeof(ts->product_name), ts->product_name);
/* IC name */
cmd[0] = MIP4_R0_INFO;
cmd[1] = MIP4_R1_INFO_IC_NAME;
error = mip4_i2c_xfer(ts, cmd, sizeof(cmd),
ts->ic_name, sizeof(ts->ic_name));
if (error)
dev_warn(&ts->client->dev,
"Failed to retrieve IC name: %d\n", error);
else
dev_dbg(&ts->client->dev, "IC name: %.*s\n",
(int)sizeof(ts->ic_name), ts->ic_name);
/* Firmware version */
error = mip4_get_fw_version(ts);
if (error)
......@@ -1335,9 +1348,30 @@ static ssize_t mip4_sysfs_read_hw_version(struct device *dev,
static DEVICE_ATTR(hw_version, S_IRUGO, mip4_sysfs_read_hw_version, NULL);
static ssize_t mip4_sysfs_read_ic_name(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct mip4_ts *ts = i2c_get_clientdata(client);
size_t count;
mutex_lock(&ts->input->mutex);
count = snprintf(buf, PAGE_SIZE, "%.*s\n",
(int)sizeof(ts->ic_name), ts->ic_name);
mutex_unlock(&ts->input->mutex);
return count;
}
static DEVICE_ATTR(ic_name, S_IRUGO, mip4_sysfs_read_ic_name, NULL);
static struct attribute *mip4_attrs[] = {
&dev_attr_fw_version.attr,
&dev_attr_hw_version.attr,
&dev_attr_ic_name.attr,
&dev_attr_update_fw.attr,
NULL,
};
......@@ -1538,6 +1572,6 @@ static struct i2c_driver mip4_driver = {
module_i2c_driver(mip4_driver);
MODULE_DESCRIPTION("MELFAS MIP4 Touchscreen");
MODULE_VERSION("2016.03.12");
MODULE_VERSION("2016.09.28");
MODULE_AUTHOR("Sangwon Jee <jeesw@melfas.com>");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment