Commit 69b626e6 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Mark Brown

ASoC: wm8955: replace codec to component

Now we can replace Codec to Component. Let's do it.

Note:
	xxx_codec_xxx()		->	xxx_component_xxx()
	.idle_bias_off = 0	->	.idle_bias_on = 1
	.ignore_pmdown_time = 0	->	.use_pmdown_time = 1
	-			->	.endianness = 1
	-			->	.non_legacy_dai_naming = 1
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 7928b2cb
...@@ -128,9 +128,9 @@ static bool wm8955_volatile(struct device *dev, unsigned int reg) ...@@ -128,9 +128,9 @@ static bool wm8955_volatile(struct device *dev, unsigned int reg)
} }
} }
static int wm8955_reset(struct snd_soc_codec *codec) static int wm8955_reset(struct snd_soc_component *component)
{ {
return snd_soc_write(codec, WM8955_RESET, 0); return snd_soc_component_write(component, WM8955_RESET, 0);
} }
struct pll_factors { struct pll_factors {
...@@ -242,9 +242,9 @@ static struct { ...@@ -242,9 +242,9 @@ static struct {
{ 11289600, 88200, 0, 31, }, { 11289600, 88200, 0, 31, },
}; };
static int wm8955_configure_clocking(struct snd_soc_codec *codec) static int wm8955_configure_clocking(struct snd_soc_component *component)
{ {
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
int i, ret, val; int i, ret, val;
int clocking = 0; int clocking = 0;
int srate = 0; int srate = 0;
...@@ -267,7 +267,7 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) ...@@ -267,7 +267,7 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
/* We should never get here with an unsupported sample rate */ /* We should never get here with an unsupported sample rate */
if (sr == -1) { if (sr == -1) {
dev_err(codec->dev, "Sample rate %dHz unsupported\n", dev_err(component->dev, "Sample rate %dHz unsupported\n",
wm8955->fs); wm8955->fs);
WARN_ON(sr == -1); WARN_ON(sr == -1);
return -EINVAL; return -EINVAL;
...@@ -282,30 +282,30 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) ...@@ -282,30 +282,30 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
/* Use the last divider configuration we saw for the /* Use the last divider configuration we saw for the
* sample rate. */ * sample rate. */
ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate, ret = wm8995_pll_factors(component->dev, wm8955->mclk_rate,
clock_cfgs[sr].mclk, &pll); clock_cfgs[sr].mclk, &pll);
if (ret != 0) { if (ret != 0) {
dev_err(codec->dev, dev_err(component->dev,
"Unable to generate %dHz from %dHz MCLK\n", "Unable to generate %dHz from %dHz MCLK\n",
wm8955->fs, wm8955->mclk_rate); wm8955->fs, wm8955->mclk_rate);
return -EINVAL; return -EINVAL;
} }
snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1, snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_1,
WM8955_N_MASK | WM8955_K_21_18_MASK, WM8955_N_MASK | WM8955_K_21_18_MASK,
(pll.n << WM8955_N_SHIFT) | (pll.n << WM8955_N_SHIFT) |
pll.k >> 18); pll.k >> 18);
snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2, snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_2,
WM8955_K_17_9_MASK, WM8955_K_17_9_MASK,
(pll.k >> 9) & WM8955_K_17_9_MASK); (pll.k >> 9) & WM8955_K_17_9_MASK);
snd_soc_update_bits(codec, WM8955_PLL_CONTROL_3, snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_3,
WM8955_K_8_0_MASK, WM8955_K_8_0_MASK,
pll.k & WM8955_K_8_0_MASK); pll.k & WM8955_K_8_0_MASK);
if (pll.k) if (pll.k)
snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_4,
WM8955_KEN, WM8955_KEN); WM8955_KEN, WM8955_KEN);
else else
snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4, snd_soc_component_update_bits(component, WM8955_PLL_CONTROL_4,
WM8955_KEN, 0); WM8955_KEN, 0);
if (pll.outdiv) if (pll.outdiv)
...@@ -314,17 +314,17 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) ...@@ -314,17 +314,17 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
val = WM8955_PLL_RB; val = WM8955_PLL_RB;
/* Now start the PLL running */ /* Now start the PLL running */
snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_PLL_RB | WM8955_PLLOUTDIV2, val); WM8955_PLL_RB | WM8955_PLLOUTDIV2, val);
snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_PLLEN, WM8955_PLLEN); WM8955_PLLEN, WM8955_PLLEN);
} }
srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT); srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT);
snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, snd_soc_component_update_bits(component, WM8955_SAMPLE_RATE,
WM8955_USB | WM8955_SR_MASK, srate); WM8955_USB | WM8955_SR_MASK, srate);
snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_MCLKSEL, clocking); WM8955_MCLKSEL, clocking);
return 0; return 0;
...@@ -333,22 +333,22 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec) ...@@ -333,22 +333,22 @@ static int wm8955_configure_clocking(struct snd_soc_codec *codec)
static int wm8955_sysclk(struct snd_soc_dapm_widget *w, static int wm8955_sysclk(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event) struct snd_kcontrol *kcontrol, int event)
{ {
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
int ret = 0; int ret = 0;
/* Always disable the clocks - if we're doing reconfiguration this /* Always disable the clocks - if we're doing reconfiguration this
* avoids misclocking. * avoids misclocking.
*/ */
snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_DIGENB, 0); WM8955_DIGENB, 0);
snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_PLL_RB | WM8955_PLLEN, 0); WM8955_PLL_RB | WM8955_PLLEN, 0);
switch (event) { switch (event) {
case SND_SOC_DAPM_POST_PMD: case SND_SOC_DAPM_POST_PMD:
break; break;
case SND_SOC_DAPM_PRE_PMU: case SND_SOC_DAPM_PRE_PMU:
ret = wm8955_configure_clocking(codec); ret = wm8955_configure_clocking(component);
break; break;
default: default:
ret = -EINVAL; ret = -EINVAL;
...@@ -360,9 +360,9 @@ static int wm8955_sysclk(struct snd_soc_dapm_widget *w, ...@@ -360,9 +360,9 @@ static int wm8955_sysclk(struct snd_soc_dapm_widget *w,
static int deemph_settings[] = { 0, 32000, 44100, 48000 }; static int deemph_settings[] = { 0, 32000, 44100, 48000 };
static int wm8955_set_deemph(struct snd_soc_codec *codec) static int wm8955_set_deemph(struct snd_soc_component *component)
{ {
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
int val, i, best; int val, i, best;
/* If we're using deemphasis select the nearest available sample /* If we're using deemphasis select the nearest available sample
...@@ -381,17 +381,17 @@ static int wm8955_set_deemph(struct snd_soc_codec *codec) ...@@ -381,17 +381,17 @@ static int wm8955_set_deemph(struct snd_soc_codec *codec)
val = 0; val = 0;
} }
dev_dbg(codec->dev, "Set deemphasis %d\n", val); dev_dbg(component->dev, "Set deemphasis %d\n", val);
return snd_soc_update_bits(codec, WM8955_DAC_CONTROL, return snd_soc_component_update_bits(component, WM8955_DAC_CONTROL,
WM8955_DEEMPH_MASK, val); WM8955_DEEMPH_MASK, val);
} }
static int wm8955_get_deemph(struct snd_kcontrol *kcontrol, static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol) struct snd_ctl_elem_value *ucontrol)
{ {
struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = wm8955->deemph; ucontrol->value.integer.value[0] = wm8955->deemph;
return 0; return 0;
...@@ -400,8 +400,8 @@ static int wm8955_get_deemph(struct snd_kcontrol *kcontrol, ...@@ -400,8 +400,8 @@ static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
static int wm8955_put_deemph(struct snd_kcontrol *kcontrol, static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol) struct snd_ctl_elem_value *ucontrol)
{ {
struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
unsigned int deemph = ucontrol->value.integer.value[0]; unsigned int deemph = ucontrol->value.integer.value[0];
if (deemph > 1) if (deemph > 1)
...@@ -409,7 +409,7 @@ static int wm8955_put_deemph(struct snd_kcontrol *kcontrol, ...@@ -409,7 +409,7 @@ static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
wm8955->deemph = deemph; wm8955->deemph = deemph;
return wm8955_set_deemph(codec); return wm8955_set_deemph(component);
} }
static const char *bass_mode_text[] = { static const char *bass_mode_text[] = {
...@@ -592,8 +592,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, ...@@ -592,8 +592,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params, struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai) struct snd_soc_dai *dai)
{ {
struct snd_soc_codec *codec = dai->codec; struct snd_soc_component *component = dai->component;
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
int ret; int ret;
int wl; int wl;
...@@ -613,25 +613,25 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, ...@@ -613,25 +613,25 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream,
default: default:
return -EINVAL; return -EINVAL;
} }
snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, snd_soc_component_update_bits(component, WM8955_AUDIO_INTERFACE,
WM8955_WL_MASK, wl); WM8955_WL_MASK, wl);
wm8955->fs = params_rate(params); wm8955->fs = params_rate(params);
wm8955_set_deemph(codec); wm8955_set_deemph(component);
/* If the chip is clocked then disable the clocks and force a /* If the chip is clocked then disable the clocks and force a
* reconfiguration, otherwise DAPM will power up the * reconfiguration, otherwise DAPM will power up the
* clocks for us later. */ * clocks for us later. */
ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1); ret = snd_soc_component_read32(component, WM8955_POWER_MANAGEMENT_1);
if (ret < 0) if (ret < 0)
return ret; return ret;
if (ret & WM8955_DIGENB) { if (ret & WM8955_DIGENB) {
snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_DIGENB, 0); WM8955_DIGENB, 0);
snd_soc_update_bits(codec, WM8955_CLOCKING_PLL, snd_soc_component_update_bits(component, WM8955_CLOCKING_PLL,
WM8955_PLL_RB | WM8955_PLLEN, 0); WM8955_PLL_RB | WM8955_PLLEN, 0);
wm8955_configure_clocking(codec); wm8955_configure_clocking(component);
} }
return 0; return 0;
...@@ -641,8 +641,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream, ...@@ -641,8 +641,8 @@ static int wm8955_hw_params(struct snd_pcm_substream *substream,
static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir) unsigned int freq, int dir)
{ {
struct snd_soc_codec *codec = dai->codec; struct snd_soc_component *component = dai->component;
struct wm8955_priv *priv = snd_soc_codec_get_drvdata(codec); struct wm8955_priv *priv = snd_soc_component_get_drvdata(component);
int div; int div;
switch (clk_id) { switch (clk_id) {
...@@ -655,7 +655,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, ...@@ -655,7 +655,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
div = 0; div = 0;
} }
snd_soc_update_bits(codec, WM8955_SAMPLE_RATE, snd_soc_component_update_bits(component, WM8955_SAMPLE_RATE,
WM8955_MCLKDIV2, div); WM8955_MCLKDIV2, div);
break; break;
...@@ -670,7 +670,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id, ...@@ -670,7 +670,7 @@ static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{ {
struct snd_soc_codec *codec = dai->codec; struct snd_soc_component *component = dai->component;
u16 aif = 0; u16 aif = 0;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
...@@ -739,7 +739,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) ...@@ -739,7 +739,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
return -EINVAL; return -EINVAL;
} }
snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE, snd_soc_component_update_bits(component, WM8955_AUDIO_INTERFACE,
WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV | WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV |
WM8955_LRP, aif); WM8955_LRP, aif);
...@@ -749,7 +749,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) ...@@ -749,7 +749,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute) static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{ {
struct snd_soc_codec *codec = codec_dai->codec; struct snd_soc_component *component = codec_dai->component;
int val; int val;
if (mute) if (mute)
...@@ -757,15 +757,15 @@ static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute) ...@@ -757,15 +757,15 @@ static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute)
else else
val = 0; val = 0;
snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val); snd_soc_component_update_bits(component, WM8955_DAC_CONTROL, WM8955_DACMU, val);
return 0; return 0;
} }
static int wm8955_set_bias_level(struct snd_soc_codec *codec, static int wm8955_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level) enum snd_soc_bias_level level)
{ {
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
int ret; int ret;
switch (level) { switch (level) {
...@@ -774,22 +774,22 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, ...@@ -774,22 +774,22 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
case SND_SOC_BIAS_PREPARE: case SND_SOC_BIAS_PREPARE:
/* VMID resistance 2*50k */ /* VMID resistance 2*50k */
snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_VMIDSEL_MASK, WM8955_VMIDSEL_MASK,
0x1 << WM8955_VMIDSEL_SHIFT); 0x1 << WM8955_VMIDSEL_SHIFT);
/* Default bias current */ /* Default bias current */
snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_1,
WM8955_VSEL_MASK, WM8955_VSEL_MASK,
0x2 << WM8955_VSEL_SHIFT); 0x2 << WM8955_VSEL_SHIFT);
break; break;
case SND_SOC_BIAS_STANDBY: case SND_SOC_BIAS_STANDBY:
if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
wm8955->supplies); wm8955->supplies);
if (ret != 0) { if (ret != 0) {
dev_err(codec->dev, dev_err(component->dev,
"Failed to enable supplies: %d\n", "Failed to enable supplies: %d\n",
ret); ret);
return ret; return ret;
...@@ -798,7 +798,7 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, ...@@ -798,7 +798,7 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
regcache_sync(wm8955->regmap); regcache_sync(wm8955->regmap);
/* Enable VREF and VMID */ /* Enable VREF and VMID */
snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_VREF | WM8955_VREF |
WM8955_VMIDSEL_MASK, WM8955_VMIDSEL_MASK,
WM8955_VREF | WM8955_VREF |
...@@ -808,29 +808,29 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec, ...@@ -808,29 +808,29 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
msleep(500); msleep(500);
/* High resistance VROI to maintain outputs */ /* High resistance VROI to maintain outputs */
snd_soc_update_bits(codec, snd_soc_component_update_bits(component,
WM8955_ADDITIONAL_CONTROL_3, WM8955_ADDITIONAL_CONTROL_3,
WM8955_VROI, WM8955_VROI); WM8955_VROI, WM8955_VROI);
} }
/* Maintain VMID with 2*250k */ /* Maintain VMID with 2*250k */
snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_VMIDSEL_MASK, WM8955_VMIDSEL_MASK,
0x2 << WM8955_VMIDSEL_SHIFT); 0x2 << WM8955_VMIDSEL_SHIFT);
/* Minimum bias current */ /* Minimum bias current */
snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1, snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_1,
WM8955_VSEL_MASK, 0); WM8955_VSEL_MASK, 0);
break; break;
case SND_SOC_BIAS_OFF: case SND_SOC_BIAS_OFF:
/* Low resistance VROI to help discharge */ /* Low resistance VROI to help discharge */
snd_soc_update_bits(codec, snd_soc_component_update_bits(component,
WM8955_ADDITIONAL_CONTROL_3, WM8955_ADDITIONAL_CONTROL_3,
WM8955_VROI, 0); WM8955_VROI, 0);
/* Turn off VMID and VREF */ /* Turn off VMID and VREF */
snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1, snd_soc_component_update_bits(component, WM8955_POWER_MANAGEMENT_1,
WM8955_VREF | WM8955_VREF |
WM8955_VMIDSEL_MASK, 0); WM8955_VMIDSEL_MASK, 0);
...@@ -865,70 +865,70 @@ static struct snd_soc_dai_driver wm8955_dai = { ...@@ -865,70 +865,70 @@ static struct snd_soc_dai_driver wm8955_dai = {
.ops = &wm8955_dai_ops, .ops = &wm8955_dai_ops,
}; };
static int wm8955_probe(struct snd_soc_codec *codec) static int wm8955_probe(struct snd_soc_component *component)
{ {
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec); struct wm8955_priv *wm8955 = snd_soc_component_get_drvdata(component);
struct wm8955_pdata *pdata = dev_get_platdata(codec->dev); struct wm8955_pdata *pdata = dev_get_platdata(component->dev);
int ret, i; int ret, i;
for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++) for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++)
wm8955->supplies[i].supply = wm8955_supply_names[i]; wm8955->supplies[i].supply = wm8955_supply_names[i];
ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies), ret = devm_regulator_bulk_get(component->dev, ARRAY_SIZE(wm8955->supplies),
wm8955->supplies); wm8955->supplies);
if (ret != 0) { if (ret != 0) {
dev_err(codec->dev, "Failed to request supplies: %d\n", ret); dev_err(component->dev, "Failed to request supplies: %d\n", ret);
return ret; return ret;
} }
ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies), ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
wm8955->supplies); wm8955->supplies);
if (ret != 0) { if (ret != 0) {
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); dev_err(component->dev, "Failed to enable supplies: %d\n", ret);
return ret; return ret;
} }
ret = wm8955_reset(codec); ret = wm8955_reset(component);
if (ret < 0) { if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset: %d\n", ret); dev_err(component->dev, "Failed to issue reset: %d\n", ret);
goto err_enable; goto err_enable;
} }
/* Change some default settings - latch VU and enable ZC */ /* Change some default settings - latch VU and enable ZC */
snd_soc_update_bits(codec, WM8955_LEFT_DAC_VOLUME, snd_soc_component_update_bits(component, WM8955_LEFT_DAC_VOLUME,
WM8955_LDVU, WM8955_LDVU); WM8955_LDVU, WM8955_LDVU);
snd_soc_update_bits(codec, WM8955_RIGHT_DAC_VOLUME, snd_soc_component_update_bits(component, WM8955_RIGHT_DAC_VOLUME,
WM8955_RDVU, WM8955_RDVU); WM8955_RDVU, WM8955_RDVU);
snd_soc_update_bits(codec, WM8955_LOUT1_VOLUME, snd_soc_component_update_bits(component, WM8955_LOUT1_VOLUME,
WM8955_LO1VU | WM8955_LO1ZC, WM8955_LO1VU | WM8955_LO1ZC,
WM8955_LO1VU | WM8955_LO1ZC); WM8955_LO1VU | WM8955_LO1ZC);
snd_soc_update_bits(codec, WM8955_ROUT1_VOLUME, snd_soc_component_update_bits(component, WM8955_ROUT1_VOLUME,
WM8955_RO1VU | WM8955_RO1ZC, WM8955_RO1VU | WM8955_RO1ZC,
WM8955_RO1VU | WM8955_RO1ZC); WM8955_RO1VU | WM8955_RO1ZC);
snd_soc_update_bits(codec, WM8955_LOUT2_VOLUME, snd_soc_component_update_bits(component, WM8955_LOUT2_VOLUME,
WM8955_LO2VU | WM8955_LO2ZC, WM8955_LO2VU | WM8955_LO2ZC,
WM8955_LO2VU | WM8955_LO2ZC); WM8955_LO2VU | WM8955_LO2ZC);
snd_soc_update_bits(codec, WM8955_ROUT2_VOLUME, snd_soc_component_update_bits(component, WM8955_ROUT2_VOLUME,
WM8955_RO2VU | WM8955_RO2ZC, WM8955_RO2VU | WM8955_RO2ZC,
WM8955_RO2VU | WM8955_RO2ZC); WM8955_RO2VU | WM8955_RO2ZC);
snd_soc_update_bits(codec, WM8955_MONOOUT_VOLUME, snd_soc_component_update_bits(component, WM8955_MONOOUT_VOLUME,
WM8955_MOZC, WM8955_MOZC); WM8955_MOZC, WM8955_MOZC);
/* Also enable adaptive bass boost by default */ /* Also enable adaptive bass boost by default */
snd_soc_update_bits(codec, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB); snd_soc_component_update_bits(component, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB);
/* Set platform data values */ /* Set platform data values */
if (pdata) { if (pdata) {
if (pdata->out2_speaker) if (pdata->out2_speaker)
snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_2, snd_soc_component_update_bits(component, WM8955_ADDITIONAL_CONTROL_2,
WM8955_ROUT2INV, WM8955_ROUT2INV); WM8955_ROUT2INV, WM8955_ROUT2INV);
if (pdata->monoin_diff) if (pdata->monoin_diff)
snd_soc_update_bits(codec, WM8955_MONO_OUT_MIX_1, snd_soc_component_update_bits(component, WM8955_MONO_OUT_MIX_1,
WM8955_DMEN, WM8955_DMEN); WM8955_DMEN, WM8955_DMEN);
} }
snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY); snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY);
/* Bias level configuration will have done an extra enable */ /* Bias level configuration will have done an extra enable */
regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies); regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
...@@ -940,19 +940,20 @@ static int wm8955_probe(struct snd_soc_codec *codec) ...@@ -940,19 +940,20 @@ static int wm8955_probe(struct snd_soc_codec *codec)
return ret; return ret;
} }
static const struct snd_soc_codec_driver soc_codec_dev_wm8955 = { static const struct snd_soc_component_driver soc_component_dev_wm8955 = {
.probe = wm8955_probe, .probe = wm8955_probe,
.set_bias_level = wm8955_set_bias_level, .set_bias_level = wm8955_set_bias_level,
.suspend_bias_off = true, .controls = wm8955_snd_controls,
.num_controls = ARRAY_SIZE(wm8955_snd_controls),
.component_driver = { .dapm_widgets = wm8955_dapm_widgets,
.controls = wm8955_snd_controls, .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets),
.num_controls = ARRAY_SIZE(wm8955_snd_controls), .dapm_routes = wm8955_dapm_routes,
.dapm_widgets = wm8955_dapm_widgets, .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes),
.num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets), .suspend_bias_off = 1,
.dapm_routes = wm8955_dapm_routes, .idle_bias_on = 1,
.num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes), .use_pmdown_time = 1,
}, .endianness = 1,
.non_legacy_dai_naming = 1,
}; };
static const struct regmap_config wm8955_regmap = { static const struct regmap_config wm8955_regmap = {
...@@ -989,19 +990,12 @@ static int wm8955_i2c_probe(struct i2c_client *i2c, ...@@ -989,19 +990,12 @@ static int wm8955_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8955); i2c_set_clientdata(i2c, wm8955);
ret = snd_soc_register_codec(&i2c->dev, ret = devm_snd_soc_register_component(&i2c->dev,
&soc_codec_dev_wm8955, &wm8955_dai, 1); &soc_component_dev_wm8955, &wm8955_dai, 1);
return ret; return ret;
} }
static int wm8955_i2c_remove(struct i2c_client *client)
{
snd_soc_unregister_codec(&client->dev);
return 0;
}
static const struct i2c_device_id wm8955_i2c_id[] = { static const struct i2c_device_id wm8955_i2c_id[] = {
{ "wm8955", 0 }, { "wm8955", 0 },
{ } { }
...@@ -1013,7 +1007,6 @@ static struct i2c_driver wm8955_i2c_driver = { ...@@ -1013,7 +1007,6 @@ static struct i2c_driver wm8955_i2c_driver = {
.name = "wm8955", .name = "wm8955",
}, },
.probe = wm8955_i2c_probe, .probe = wm8955_i2c_probe,
.remove = wm8955_i2c_remove,
.id_table = wm8955_i2c_id, .id_table = wm8955_i2c_id,
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment