Commit 69bc3279 authored by Russell King's avatar Russell King

[ARM] Update neponset/sa1111 for Linux device model updates.

This updates these neponset and sa1111 support to use the new system
device infrastructure in the Linux device model.
parent 9c7fd8c7
...@@ -193,20 +193,30 @@ static int neponset_resume(struct device *dev, u32 level) ...@@ -193,20 +193,30 @@ static int neponset_resume(struct device *dev, u32 level)
} }
static struct device_driver neponset_device_driver = { static struct device_driver neponset_device_driver = {
.suspend = neponset_suspend, .name = "NEPONSET",
.resume = neponset_resume, .bus = &system_bus_type,
.suspend = neponset_suspend,
.resume = neponset_resume,
}; };
static struct device neponset_device = { static struct sys_device neponset_device = {
.name = "Neponset", .name = "NEPONSET",
.bus_id = "neponset", .id = 0,
.driver = &neponset_device_driver, .root = NULL,
.dev = {
.name = "Neponset",
.bus_id = "neponset",
.bus = &system_bus_type,
.driver = &neponset_device_driver,
},
}; };
static int __init neponset_init(void) static int __init neponset_init(void)
{ {
int ret; int ret;
driver_register(&neponset_device_driver);
/* /*
* The Neponset is only present on the Assabet machine type. * The Neponset is only present on the Assabet machine type.
*/ */
...@@ -231,7 +241,7 @@ static int __init neponset_init(void) ...@@ -231,7 +241,7 @@ static int __init neponset_init(void)
return -ENODEV; return -ENODEV;
} }
ret = register_sys_device(&neponset_device); ret = sys_device_register(&neponset_device);
if (ret) if (ret)
return ret; return ret;
...@@ -256,7 +266,7 @@ static int __init neponset_init(void) ...@@ -256,7 +266,7 @@ static int __init neponset_init(void)
return sa1111_init(0x40000000, IRQ_NEPONSET_SA1111); return sa1111_init(0x40000000, IRQ_NEPONSET_SA1111);
} }
arch_initcall(neponset_init); subsys_initcall(neponset_init);
static struct map_desc neponset_io_desc[] __initdata = { static struct map_desc neponset_io_desc[] __initdata = {
/* virtual physical length type */ /* virtual physical length type */
......
...@@ -43,7 +43,7 @@ ...@@ -43,7 +43,7 @@
* anchor point for all the other drivers. * anchor point for all the other drivers.
*/ */
struct sa1111 { struct sa1111 {
struct device dev; struct device *dev;
struct resource res; struct resource res;
int irq; int irq;
spinlock_t lock; spinlock_t lock;
...@@ -64,7 +64,7 @@ static struct sa1111_dev usb_dev = { ...@@ -64,7 +64,7 @@ static struct sa1111_dev usb_dev = {
.devid = SA1111_DEVID_USB, .devid = SA1111_DEVID_USB,
.irq = { .irq = {
IRQ_USBPWR, IRQ_USBPWR,
IRQ_NHCIM, IRQ_HCIM,
IRQ_HCIBUFFACC, IRQ_HCIBUFFACC,
IRQ_HCIRMTWKP, IRQ_HCIRMTWKP,
IRQ_NHCIMFCIR, IRQ_NHCIMFCIR,
...@@ -148,7 +148,6 @@ static struct sa1111_dev *devs[] = { ...@@ -148,7 +148,6 @@ static struct sa1111_dev *devs[] = {
&ssp_dev, &ssp_dev,
&kbd_dev, &kbd_dev,
&mse_dev, &mse_dev,
&int_dev,
&pcmcia_dev, &pcmcia_dev,
}; };
...@@ -158,7 +157,6 @@ static unsigned int dev_offset[] = { ...@@ -158,7 +157,6 @@ static unsigned int dev_offset[] = {
0x0800, 0x0800,
SA1111_KBD, SA1111_KBD,
SA1111_MSE, SA1111_MSE,
SA1111_INTC,
0x1800, 0x1800,
}; };
...@@ -372,7 +370,106 @@ static void __init sa1111_init_irq(struct sa1111_dev *sadev) ...@@ -372,7 +370,106 @@ static void __init sa1111_init_irq(struct sa1111_dev *sadev)
set_irq_chained_handler(sadev->irq[0], sa1111_irq_handler); set_irq_chained_handler(sadev->irq[0], sa1111_irq_handler);
} }
static struct device_driver sa1111_device_driver; /*
* Bring the SA1111 out of reset. This requires a set procedure:
* 1. nRESET asserted (by hardware)
* 2. CLK turned on from SA1110
* 3. nRESET deasserted
* 4. VCO turned on, PLL_BYPASS turned off
* 5. Wait lock time, then assert RCLKEn
* 7. PCR set to allow clocking of individual functions
*
* Until we've done this, the only registers we can access are:
* SBI_SKCR
* SBI_SMCR
* SBI_SKID
*/
static void sa1111_wake(struct sa1111 *sachip)
{
unsigned long flags, r;
spin_lock_irqsave(&sachip->lock, flags);
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_3_6864MHz;
/*
* Turn VCO on, and disable PLL Bypass.
*/
r = sa1111_readl(sachip->base + SA1111_SKCR);
r &= ~SKCR_VCO_OFF;
sa1111_writel(r, sachip->base + SA1111_SKCR);
r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
sa1111_writel(r, sachip->base + SA1111_SKCR);
/*
* Wait lock time. SA1111 manual _doesn't_
* specify a figure for this! We choose 100us.
*/
udelay(100);
/*
* Enable RCLK. We also ensure that RDYEN is set.
*/
r |= SKCR_RCLKEN | SKCR_RDYEN;
sa1111_writel(r, sachip->base + SA1111_SKCR);
/*
* Wait 14 RCLK cycles for the chip to finish coming out
* of reset. (RCLK=24MHz). This is 590ns.
*/
udelay(1);
/*
* Ensure all clocks are initially off.
*/
sa1111_writel(0, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
}
/*
* Configure the SA1111 shared memory controller.
*/
void
sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
unsigned int cas_latency)
{
unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
if (cas_latency == 3)
smcr |= SMCR_CLAT;
sa1111_writel(smcr, sachip->base + SA1111_SMCR);
}
static void
sa1111_init_one_child(struct sa1111 *sachip, struct sa1111_dev *sadev, unsigned int offset)
{
snprintf(sadev->dev.bus_id, sizeof(sadev->dev.bus_id),
"%4.4x", offset);
sadev->dev.parent = sachip->dev;
sadev->dev.bus = &sa1111_bus_type;
sadev->res.start = sachip->res.start + offset;
sadev->res.end = sadev->res.start + 511;
sadev->res.name = sadev->dev.name;
sadev->res.flags = IORESOURCE_MEM;
sadev->mapbase = sachip->base + offset;
if (request_resource(&sachip->res, &sadev->res)) {
printk("SA1111: failed to allocate resource for %s\n",
sadev->res.name);
return;
}
device_register(&sadev->dev);
}
/** /**
* sa1111_probe - probe for a single SA1111 chip. * sa1111_probe - probe for a single SA1111 chip.
...@@ -387,11 +484,11 @@ static struct device_driver sa1111_device_driver; ...@@ -387,11 +484,11 @@ static struct device_driver sa1111_device_driver;
* %0 successful. * %0 successful.
*/ */
static int __init static int __init
sa1111_probe(unsigned long phys_addr, int irq) __sa1111_probe(struct device *me, unsigned long phys_addr, int irq)
{ {
struct sa1111 *sachip; struct sa1111 *sachip;
unsigned long id; unsigned long id;
unsigned int has_devs; unsigned int has_devs, val;
int i, ret = -ENODEV; int i, ret = -ENODEV;
sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL); sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL);
...@@ -402,12 +499,10 @@ sa1111_probe(unsigned long phys_addr, int irq) ...@@ -402,12 +499,10 @@ sa1111_probe(unsigned long phys_addr, int irq)
spin_lock_init(&sachip->lock); spin_lock_init(&sachip->lock);
strncpy(sachip->dev.name, "Intel Corporation SA1111", sizeof(sachip->dev.name)); sachip->dev = me;
snprintf(sachip->dev.bus_id, sizeof(sachip->dev.bus_id), "%8.8lx", phys_addr); dev_set_drvdata(sachip->dev, sachip);
sachip->dev.driver = &sa1111_device_driver;
sachip->dev.driver_data = sachip;
sachip->res.name = sachip->dev.name; sachip->res.name = me->name;
sachip->res.start = phys_addr; sachip->res.start = phys_addr;
sachip->res.end = phys_addr + 0x2000; sachip->res.end = phys_addr + 0x2000;
sachip->irq = irq; sachip->irq = irq;
...@@ -417,6 +512,10 @@ sa1111_probe(unsigned long phys_addr, int irq) ...@@ -417,6 +512,10 @@ sa1111_probe(unsigned long phys_addr, int irq)
goto out; goto out;
} }
/*
* Map the whole region. This also maps the
* registers for our children.
*/
sachip->base = ioremap(phys_addr, PAGE_SIZE * 2); sachip->base = ioremap(phys_addr, PAGE_SIZE * 2);
if (!sachip->base) { if (!sachip->base) {
ret = -ENOMEM; ret = -ENOMEM;
...@@ -433,17 +532,47 @@ sa1111_probe(unsigned long phys_addr, int irq) ...@@ -433,17 +532,47 @@ sa1111_probe(unsigned long phys_addr, int irq)
goto unmap; goto unmap;
} }
/*
* We found the chip.
*/
ret = register_sys_device(&sachip->dev);
if (ret)
printk("sa1111 device_register failed: %d\n", ret);
printk(KERN_INFO "SA1111 Microprocessor Companion Chip: " printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
"silicon revision %lx, metal revision %lx\n", "silicon revision %lx, metal revision %lx\n",
(id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK)); (id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK));
/*
* We found it. Wake the chip up, and initialise.
*/
sa1111_wake(sachip);
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(sachip, 1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
* (currently, we always enable it.)
*/
val = sa1111_readl(sachip->base + SA1111_SKPCR);
sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
/*
* The interrupt controller must be initialised before any
* other device to ensure that the interrupts are available.
*/
int_dev.irq[0] = irq;
sa1111_init_one_child(sachip, &int_dev, SA1111_INTC);
sa1111_init_irq(&int_dev);
g_sa1111 = sachip; g_sa1111 = sachip;
has_devs = ~0; has_devs = ~0;
...@@ -453,29 +582,9 @@ sa1111_probe(unsigned long phys_addr, int irq) ...@@ -453,29 +582,9 @@ sa1111_probe(unsigned long phys_addr, int irq)
else else
has_devs &= ~(1 << 1); has_devs &= ~(1 << 1);
for (i = 0; i < ARRAY_SIZE(devs); i++) { for (i = 0; i < ARRAY_SIZE(devs); i++)
if (!(has_devs & (1 << i))) if (has_devs & (1 << i))
continue; sa1111_init_one_child(sachip, devs[i], dev_offset[i]);
snprintf(devs[i]->dev.bus_id, sizeof(devs[i]->dev.bus_id),
"%4.4x", dev_offset[i]);
devs[i]->dev.parent = &sachip->dev;
devs[i]->dev.bus = &sa1111_bus_type;
devs[i]->res.start = sachip->res.start + dev_offset[i];
devs[i]->res.end = devs[i]->res.start + 511;
devs[i]->res.name = devs[i]->dev.name;
devs[i]->res.flags = IORESOURCE_MEM;
devs[i]->mapbase = sachip->base + dev_offset[i];
if (request_resource(&sachip->res, &devs[i]->res)) {
printk("SA1111: failed to allocate resource for %s\n",
devs[i]->res.name);
continue;
}
device_register(&devs[i]->dev);
}
return 0; return 0;
...@@ -502,84 +611,6 @@ static void __sa1111_remove(struct sa1111 *sachip) ...@@ -502,84 +611,6 @@ static void __sa1111_remove(struct sa1111 *sachip)
kfree(sachip); kfree(sachip);
} }
/*
* Bring the SA1111 out of reset. This requires a set procedure:
* 1. nRESET asserted (by hardware)
* 2. CLK turned on from SA1110
* 3. nRESET deasserted
* 4. VCO turned on, PLL_BYPASS turned off
* 5. Wait lock time, then assert RCLKEn
* 7. PCR set to allow clocking of individual functions
*
* Until we've done this, the only registers we can access are:
* SBI_SKCR
* SBI_SMCR
* SBI_SKID
*/
static void sa1111_wake(struct sa1111 *sachip)
{
unsigned long flags, r;
spin_lock_irqsave(&sachip->lock, flags);
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_3_6864MHz;
/*
* Turn VCO on, and disable PLL Bypass.
*/
r = sa1111_readl(sachip->base + SA1111_SKCR);
r &= ~SKCR_VCO_OFF;
sa1111_writel(r, sachip->base + SA1111_SKCR);
r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
sa1111_writel(r, sachip->base + SA1111_SKCR);
/*
* Wait lock time. SA1111 manual _doesn't_
* specify a figure for this! We choose 100us.
*/
udelay(100);
/*
* Enable RCLK. We also ensure that RDYEN is set.
*/
r |= SKCR_RCLKEN | SKCR_RDYEN;
sa1111_writel(r, sachip->base + SA1111_SKCR);
/*
* Wait 14 RCLK cycles for the chip to finish coming out
* of reset. (RCLK=24MHz). This is 590ns.
*/
udelay(1);
/*
* Ensure all clocks are initially off.
*/
sa1111_writel(0, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
}
/*
* Configure the SA1111 shared memory controller.
*/
void
sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
unsigned int cas_latency)
{
unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
if (cas_latency == 3)
smcr |= SMCR_CLAT;
sa1111_writel(smcr, sachip->base + SA1111_SMCR);
}
/* /*
* According to the "Intel StrongARM SA-1111 Microprocessor Companion * According to the "Intel StrongARM SA-1111 Microprocessor Companion
* Chip Specification Update" (June 2000), erratum #7, there is a * Chip Specification Update" (June 2000), erratum #7, there is a
...@@ -648,52 +679,6 @@ int sa1111_check_dma_bug(dma_addr_t addr) ...@@ -648,52 +679,6 @@ int sa1111_check_dma_bug(dma_addr_t addr)
return 0; return 0;
} }
int sa1111_init(unsigned long phys, unsigned int irq)
{
unsigned int val;
int ret;
ret = sa1111_probe(phys, irq);
if (ret < 0)
return ret;
/*
* We found it. Wake the chip up.
*/
sa1111_wake(g_sa1111);
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(g_sa1111, 1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
val = sa1111_readl(g_sa1111->base + SA1111_SKPCR);
sa1111_writel(val | SKPCR_DCLKEN, g_sa1111->base + SA1111_SKPCR);
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
/*
* Initialise SA1111 IRQs
*/
int_dev.irq[0] = irq;
sa1111_init_irq(&int_dev);
return 0;
}
struct sa1111_save_data { struct sa1111_save_data {
unsigned int skcr; unsigned int skcr;
unsigned int skpcr; unsigned int skpcr;
...@@ -717,7 +702,7 @@ struct sa1111_save_data { ...@@ -717,7 +702,7 @@ struct sa1111_save_data {
static int sa1111_suspend(struct device *dev, u32 state, u32 level) static int sa1111_suspend(struct device *dev, u32 state, u32 level)
{ {
struct sa1111 *sachip = dev->driver_data; struct sa1111 *sachip = dev_get_drvdata(dev);
unsigned long flags; unsigned long flags;
char *base; char *base;
...@@ -789,7 +774,7 @@ static int sa1111_suspend(struct device *dev, u32 state, u32 level) ...@@ -789,7 +774,7 @@ static int sa1111_suspend(struct device *dev, u32 state, u32 level)
*/ */
static int sa1111_resume(struct device *dev, u32 level) static int sa1111_resume(struct device *dev, u32 level)
{ {
struct sa1111 *sachip = dev->driver_data; struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save; struct sa1111_save_data *save;
unsigned long flags, id; unsigned long flags, id;
char *base; char *base;
...@@ -809,6 +794,7 @@ static int sa1111_resume(struct device *dev, u32 level) ...@@ -809,6 +794,7 @@ static int sa1111_resume(struct device *dev, u32 level)
id = sa1111_readl(sachip->base + SA1111_SKID); id = sa1111_readl(sachip->base + SA1111_SKID);
if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
__sa1111_remove(sachip); __sa1111_remove(sachip);
dev_set_drvdata(dev, NULL);
kfree(save); kfree(save);
return 0; return 0;
} }
...@@ -840,18 +826,85 @@ static int sa1111_resume(struct device *dev, u32 level) ...@@ -840,18 +826,85 @@ static int sa1111_resume(struct device *dev, u32 level)
return 0; return 0;
} }
static int sa1111_probe(struct device *dev)
{
return -ENODEV;
}
static int sa1111_remove(struct device *dev)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
if (sachip) {
__sa1111_remove(sachip);
dev_set_drvdata(dev, NULL);
kfree(dev->saved_state);
dev->saved_state = NULL;
}
return 0;
}
/*
* Not sure if this should be on the system bus or not yet.
* We really want some way to register a system device at
* the per-machine level, and then have this driver pick
* up the registered devices.
*
* We also need to handle the SDRAM configuration for
* PXA250/SA1110 machine classes.
*/
static struct device_driver sa1111_device_driver = { static struct device_driver sa1111_device_driver = {
.name = "SA1111",
.bus = &system_bus_type,
.probe = sa1111_probe,
.remove = sa1111_remove,
.suspend = sa1111_suspend, .suspend = sa1111_suspend,
.resume = sa1111_resume, .resume = sa1111_resume,
}; };
/*
* Register the SA1111 driver with LDM.
*/
static int sa1111_driver_init(void)
{
driver_register(&sa1111_device_driver);
return 0;
}
arch_initcall(sa1111_driver_init);
static struct sys_device sa1111_device = {
.name = "SA1111",
.id = 0,
.root = NULL,
.dev = {
.name = "Intel Corporation SA1111",
.driver = &sa1111_device_driver,
},
};
int sa1111_init(unsigned long phys, unsigned int irq)
{
int ret;
snprintf(sa1111_device.dev.bus_id, sizeof(sa1111_device.dev.bus_id), "%8.8lx", phys);
ret = sys_device_register(&sa1111_device);
if (ret)
printk("sa1111 device_register failed: %d\n", ret);
return __sa1111_probe(&sa1111_device.dev, phys, irq);
}
/* /*
* Get the parent device driver (us) structure * Get the parent device driver (us) structure
* from a child function device * from a child function device
*/ */
static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev) static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
{ {
return (struct sa1111 *)sadev->dev.parent->driver_data; return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
} }
/* /*
......
...@@ -109,7 +109,7 @@ ...@@ -109,7 +109,7 @@
#define AUDRDD (IRQ_BOARD_END + 41) #define AUDRDD (IRQ_BOARD_END + 41)
#define AUDSTO (IRQ_BOARD_END + 42) #define AUDSTO (IRQ_BOARD_END + 42)
#define IRQ_USBPWR (IRQ_BOARD_END + 43) #define IRQ_USBPWR (IRQ_BOARD_END + 43)
#define IRQ_NHCIM (IRQ_BOARD_END + 44) #define IRQ_HCIM (IRQ_BOARD_END + 44)
#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) #define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) #define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) #define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
......
...@@ -64,10 +64,6 @@ ...@@ -64,10 +64,6 @@
#define SA1111_SMCR 0x0004 #define SA1111_SMCR 0x0004
#define SA1111_SKID 0x0008 #define SA1111_SKID 0x0008
#define SBI_SKCR __CCREG(SA1111_SKCR)
#define SBI_SMCR __CCREG(SA1111_SMCR)
#define SBI_SKID __CCREG(SA1111_SKID)
#define SKCR_PLL_BYPASS (1<<0) #define SKCR_PLL_BYPASS (1<<0)
#define SKCR_RCLKEN (1<<1) #define SKCR_RCLKEN (1<<1)
#define SKCR_SLEEP (1<<2) #define SKCR_SLEEP (1<<2)
...@@ -131,16 +127,6 @@ ...@@ -131,16 +127,6 @@
#define SA1111_SKPEN1 0x021c #define SA1111_SKPEN1 0x021c
#define SA1111_SKPWM1 0x0220 #define SA1111_SKPWM1 0x0220
#define SKPCR __CCREG(SA1111_SKPCR)
#define SKCDR __CCREG(SA1111_SKCDR)
#define SKAUD __CCREG(SA1111_SKAUD)
#define SKPMC __CCREG(SA1111_SKPMC)
#define SKPTC __CCREG(SA1111_SKPTC)
#define SKPEN0 __CCREG(SA1111_SKPEN0)
#define SKPWM0 __CCREG(SA1111_SKPWM0)
#define SKPEN1 __CCREG(SA1111_SKPEN1)
#define SKPWM1 __CCREG(SA1111_SKPWM1)
#define SKPCR_UCLKEN (1<<0) #define SKPCR_UCLKEN (1<<0)
#define SKPCR_ACCLKEN (1<<1) #define SKPCR_ACCLKEN (1<<1)
#define SKPCR_I2SCLKEN (1<<2) #define SKPCR_I2SCLKEN (1<<2)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment