Merge branch 'cxgb4-T6-update'

Hariprasad Shenai says:

====================
Update support for T6 adapters

This patch changes updates the various code changes related to
register, stats and hardware related changes for T6 family of
adapters.

This patch series has been created against net-next tree and includes
patches on cxgb4 and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/chelsio/cxgb4/cxgb4.h

@@ -301,6 +301,8 @@ struct devlog_params {
 /* Stores chip specific parameters */
 struct arch_specific_params {
 	u8 nchan;
+	u8 pm_stats_cnt;
+	u8 cng_ch_bits_log;		/* congestion channel map bits width */
 	u16 mps_rplc_size;
 	u16 vfcount;
 	u32 sge_fl_db;
@@ -1255,6 +1257,7 @@ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver);
 int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op);
 int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
 		  const u8 *fw_data, unsigned int size, int force);
+int t4_fl_pkt_align(struct adapter *adap);
 unsigned int t4_flash_cfg_addr(struct adapter *adapter);
 int t4_check_fw_version(struct adapter *adap);
 int t4_get_fw_version(struct adapter *adapter, u32 *vers);

drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c

@@ -757,8 +757,8 @@ static int pm_stats_show(struct seq_file *seq, void *v)
 	};
 
 	int i;
-	u32 tx_cnt[PM_NSTATS], rx_cnt[PM_NSTATS];
-	u64 tx_cyc[PM_NSTATS], rx_cyc[PM_NSTATS];
+	u32 tx_cnt[T6_PM_NSTATS], rx_cnt[T6_PM_NSTATS];
+	u64 tx_cyc[T6_PM_NSTATS], rx_cyc[T6_PM_NSTATS];
 	struct adapter *adap = seq->private;
 
 	t4_pmtx_get_stats(adap, tx_cnt, tx_cyc);
@@ -773,6 +773,32 @@ static int pm_stats_show(struct seq_file *seq, void *v)
 	for (i = 0; i < PM_NSTATS - 1; i++)
 		seq_printf(seq, "%-13s %10u  %20llu\n",
 			   rx_pm_stats[i], rx_cnt[i], rx_cyc[i]);
+
+	if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
+		/* In T5 the granularity of the total wait is too fine.
+		 * It is not useful as it reaches the max value too fast.
+		 * Hence display this Input FIFO wait for T6 onwards.
+		 */
+		seq_printf(seq, "%13s %10s  %20s\n",
+			   " ", "Total wait", "Total Occupancy");
+		seq_printf(seq, "Tx FIFO wait  %10u  %20llu\n",
+			   tx_cnt[i], tx_cyc[i]);
+		seq_printf(seq, "Rx FIFO wait  %10u  %20llu\n",
+			   rx_cnt[i], rx_cyc[i]);
+
+		/* Skip index 6 as there is nothing useful ihere */
+		i += 2;
+
+		/* At index 7, a new stat for read latency (count, total wait)
+		 * is added.
+		 */
+		seq_printf(seq, "%13s %10s  %20s\n",
+			   " ", "Reads", "Total wait");
+		seq_printf(seq, "Tx latency    %10u  %20llu\n",
+			   tx_cnt[i], tx_cyc[i]);
+		seq_printf(seq, "Rx latency    %10u  %20llu\n",
+			   rx_cnt[i], rx_cyc[i]);
+	}
 	return 0;
 }
 
@@ -1559,8 +1585,15 @@ static int mps_tcam_show(struct seq_file *seq, void *v)
 {
 	struct adapter *adap = seq->private;
 	unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
-
 	if (v == SEQ_START_TOKEN) {
+		if (chip_ver > CHELSIO_T5) {
+			seq_puts(seq, "Idx  Ethernet address     Mask     "
+				 "  VNI   Mask   IVLAN Vld "
+				 "DIP_Hit   Lookup  Port "
+				 "Vld Ports PF  VF                           "
+				 "Replication                                "
+				 "    P0 P1 P2 P3  ML\n");
+		} else {
 			if (adap->params.arch.mps_rplc_size > 128)
 				seq_puts(seq, "Idx  Ethernet address     Mask     "
 					 "Vld Ports PF  VF                           "
@@ -1570,14 +1603,17 @@ static int mps_tcam_show(struct seq_file *seq, void *v)
 				seq_puts(seq, "Idx  Ethernet address     Mask     "
 					 "Vld Ports PF  VF              Replication"
 					 "	         P0 P1 P2 P3  ML\n");
+		}
 	} else {
 		u64 mask;
 		u8 addr[ETH_ALEN];
-		bool replicate;
+		bool replicate, dip_hit = false, vlan_vld = false;
 		unsigned int idx = (uintptr_t)v - 2;
 		u64 tcamy, tcamx, val;
-		u32 cls_lo, cls_hi, ctl;
+		u32 cls_lo, cls_hi, ctl, data2, vnix = 0, vniy = 0;
 		u32 rplc[8] = {0};
+		u8 lookup_type = 0, port_num = 0;
+		u16 ivlan = 0;
 
 		if (chip_ver > CHELSIO_T5) {
 			/* CtlCmdType - 0: Read, 1: Write
@@ -1596,6 +1632,22 @@ static int mps_tcam_show(struct seq_file *seq, void *v)
 			val = t4_read_reg(adap, MPS_CLS_TCAM_DATA1_A);
 			tcamy = DMACH_G(val) << 32;
 			tcamy |= t4_read_reg(adap, MPS_CLS_TCAM_DATA0_A);
+			data2 = t4_read_reg(adap, MPS_CLS_TCAM_DATA2_CTL_A);
+			lookup_type = DATALKPTYPE_G(data2);
+			/* 0 - Outer header, 1 - Inner header
+			 * [71:48] bit locations are overloaded for
+			 * outer vs. inner lookup types.
+			 */
+			if (lookup_type && (lookup_type != DATALKPTYPE_M)) {
+				/* Inner header VNI */
+				vniy = ((data2 & DATAVIDH2_F) << 23) |
+				       (DATAVIDH1_G(data2) << 16) | VIDL_G(val);
+				dip_hit = data2 & DATADIPHIT_F;
+			} else {
+				vlan_vld = data2 & DATAVIDH2_F;
+				ivlan = VIDL_G(val);
+			}
+			port_num = DATAPORTNUM_G(data2);
 
 			/* Read tcamx. Change the control param */
 			ctl |= CTLXYBITSEL_V(1);
@@ -1603,6 +1655,12 @@ static int mps_tcam_show(struct seq_file *seq, void *v)
 			val = t4_read_reg(adap, MPS_CLS_TCAM_DATA1_A);
 			tcamx = DMACH_G(val) << 32;
 			tcamx |= t4_read_reg(adap, MPS_CLS_TCAM_DATA0_A);
+			data2 = t4_read_reg(adap, MPS_CLS_TCAM_DATA2_CTL_A);
+			if (lookup_type && (lookup_type != DATALKPTYPE_M)) {
+				/* Inner header VNI mask */
+				vnix = ((data2 & DATAVIDH2_F) << 23) |
+				       (DATAVIDH1_G(data2) << 16) | VIDL_G(val);
+			}
 		} else {
 			tcamy = t4_read_reg64(adap, MPS_CLS_TCAM_Y_L(idx));
 			tcamx = t4_read_reg64(adap, MPS_CLS_TCAM_X_L(idx));
@@ -1662,17 +1720,47 @@ static int mps_tcam_show(struct seq_file *seq, void *v)
 		}
 
 		tcamxy2valmask(tcamx, tcamy, addr, &mask);
-		if (chip_ver > CHELSIO_T5)
-			seq_printf(seq, "%3u %02x:%02x:%02x:%02x:%02x:%02x "
-				   "%012llx%3c   %#x%4u%4d",
-				   idx, addr[0], addr[1], addr[2], addr[3],
-				   addr[4], addr[5], (unsigned long long)mask,
+		if (chip_ver > CHELSIO_T5) {
+			/* Inner header lookup */
+			if (lookup_type && (lookup_type != DATALKPTYPE_M)) {
+				seq_printf(seq,
+					   "%3u %02x:%02x:%02x:%02x:%02x:%02x "
+					   "%012llx %06x %06x    -    -   %3c"
+					   "      %3c  %4x   "
+					   "%3c   %#x%4u%4d", idx, addr[0],
+					   addr[1], addr[2], addr[3],
+					   addr[4], addr[5],
+					   (unsigned long long)mask,
+					   vniy, vnix, dip_hit ? 'Y' : 'N',
+					   lookup_type ? 'I' : 'O', port_num,
 					   (cls_lo & T6_SRAM_VLD_F) ? 'Y' : 'N',
 					   PORTMAP_G(cls_hi),
 					   T6_PF_G(cls_lo),
 					   (cls_lo & T6_VF_VALID_F) ?
 					   T6_VF_G(cls_lo) : -1);
+			} else {
+				seq_printf(seq,
+					   "%3u %02x:%02x:%02x:%02x:%02x:%02x "
+					   "%012llx    -       -   ",
+					   idx, addr[0], addr[1], addr[2],
+					   addr[3], addr[4], addr[5],
+					   (unsigned long long)mask);
+
+				if (vlan_vld)
+					seq_printf(seq, "%4u   Y     ", ivlan);
 				else
+					seq_puts(seq, "  -    N     ");
+
+				seq_printf(seq,
+					   "-      %3c  %4x   %3c   %#x%4u%4d",
+					   lookup_type ? 'I' : 'O', port_num,
+					   (cls_lo & T6_SRAM_VLD_F) ? 'Y' : 'N',
+					   PORTMAP_G(cls_hi),
+					   T6_PF_G(cls_lo),
+					   (cls_lo & T6_VF_VALID_F) ?
+					   T6_VF_G(cls_lo) : -1);
+			}
+		} else
 			seq_printf(seq, "%3u %02x:%02x:%02x:%02x:%02x:%02x "
 				   "%012llx%3c   %#x%4u%4d",
 				   idx, addr[0], addr[1], addr[2], addr[3],

drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c

@@ -686,7 +686,7 @@ static int set_pauseparam(struct net_device *dev,
 	if (epause->tx_pause)
 		lc->requested_fc |= PAUSE_TX;
 	if (netif_running(dev))
-		return t4_link_l1cfg(p->adapter, p->adapter->pf, p->tx_chan,
+		return t4_link_l1cfg(p->adapter, p->adapter->mbox, p->tx_chan,
 				     lc);
 	return 0;
 }

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c

@@ -4855,8 +4855,9 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* configure SGE_STAT_CFG_A to read WC stats */
 	if (!is_t4(adapter->params.chip))
-		t4_write_reg(adapter, SGE_STAT_CFG_A,
-			     STATSOURCE_T5_V(7) | STATMODE_V(0));
+		t4_write_reg(adapter, SGE_STAT_CFG_A, STATSOURCE_T5_V(7) |
+			     (is_t5(adapter->params.chip) ? STATMODE_V(0) :
+			      T6_STATMODE_V(0)));
 
 	for_each_port(adapter, i) {
 		struct net_device *netdev;

drivers/net/ethernet/chelsio/cxgb4/sge.c

@@ -2670,8 +2670,9 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
 	 * simple (and hopefully less wrong).
 	 */
 	if (!is_t4(adap->params.chip) && cong >= 0) {
-		u32 param, val;
+		u32 param, val, ch_map = 0;
 		int i;
+		u16 cng_ch_bits_log = adap->params.arch.cng_ch_bits_log;
 
 		param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
 			 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DMAQ_CONM_CTXT) |
@@ -2683,9 +2684,9 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
 			    CONMCTXT_CNGTPMODE_V(CONMCTXT_CNGTPMODE_CHANNEL_X);
 			for (i = 0; i < 4; i++) {
 				if (cong & (1 << i))
-					val |=
-					     CONMCTXT_CNGCHMAP_V(1 << (i << 2));
+					ch_map |= 1 << (i << cng_ch_bits_log);
 			}
+			val |= CONMCTXT_CNGCHMAP_V(ch_map);
 		}
 		ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1,
 				    &param, &val);
@@ -3173,8 +3174,7 @@ static int t4_sge_init_soft(struct adapter *adap)
 int t4_sge_init(struct adapter *adap)
 {
 	struct sge *s = &adap->sge;
-	u32 sge_control, sge_control2, sge_conm_ctrl;
-	unsigned int ingpadboundary, ingpackboundary;
+	u32 sge_control, sge_conm_ctrl;
 	int ret, egress_threshold;
 
 	/*
@@ -3185,35 +3185,7 @@ int t4_sge_init(struct adapter *adap)
 	s->pktshift = PKTSHIFT_G(sge_control);
 	s->stat_len = (sge_control & EGRSTATUSPAGESIZE_F) ? 128 : 64;
 
-	/* T4 uses a single control field to specify both the PCIe Padding and
-	 * Packing Boundary.  T5 introduced the ability to specify these
-	 * separately.  The actual Ingress Packet Data alignment boundary
-	 * within Packed Buffer Mode is the maximum of these two
-	 * specifications.  (Note that it makes no real practical sense to
-	 * have the Pading Boudary be larger than the Packing Boundary but you
-	 * could set the chip up that way and, in fact, legacy T4 code would
-	 * end doing this because it would initialize the Padding Boundary and
-	 * leave the Packing Boundary initialized to 0 (16 bytes).)
-	 */
-	ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) +
-			       INGPADBOUNDARY_SHIFT_X);
-	if (is_t4(adap->params.chip)) {
-		s->fl_align = ingpadboundary;
-	} else {
-		/* T5 has a different interpretation of one of the PCIe Packing
-		 * Boundary values.
-		 */
-		sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
-		ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
-		if (ingpackboundary == INGPACKBOUNDARY_16B_X)
-			ingpackboundary = 16;
-		else
-			ingpackboundary = 1 << (ingpackboundary +
-						INGPACKBOUNDARY_SHIFT_X);
-
-		s->fl_align = max(ingpadboundary, ingpackboundary);
-	}
-
+	s->fl_align = t4_fl_pkt_align(adap);
 	ret = t4_sge_init_soft(adap);
 	if (ret < 0)
 		return ret;
@@ -3231,10 +3203,21 @@ int t4_sge_init(struct adapter *adap)
 	 * buffers.
 	 */
 	sge_conm_ctrl = t4_read_reg(adap, SGE_CONM_CTRL_A);
-	if (is_t4(adap->params.chip))
+	switch (CHELSIO_CHIP_VERSION(adap->params.chip)) {
+	case CHELSIO_T4:
 		egress_threshold = EGRTHRESHOLD_G(sge_conm_ctrl);
-	else
+		break;
+	case CHELSIO_T5:
 		egress_threshold = EGRTHRESHOLDPACKING_G(sge_conm_ctrl);
+		break;
+	case CHELSIO_T6:
+		egress_threshold = T6_EGRTHRESHOLDPACKING_G(sge_conm_ctrl);
+		break;
+	default:
+		dev_err(adap->pdev_dev, "Unsupported Chip version %d\n",
+			CHELSIO_CHIP_VERSION(adap->params.chip));
+		return -EINVAL;
+	}
 	s->fl_starve_thres = 2*egress_threshold + 1;
 
 	t4_idma_monitor_init(adap, &s->idma_monitor);

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c

@@ -1942,8 +1942,12 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
 		0x1190, 0x1194,
 		0x11a0, 0x11a4,
 		0x11b0, 0x11b4,
-		0x11fc, 0x1254,
-		0x1280, 0x133c,
+		0x11fc, 0x1258,
+		0x1280, 0x12d4,
+		0x12d9, 0x12d9,
+		0x12de, 0x12de,
+		0x12e3, 0x12e3,
+		0x12e8, 0x133c,
 		0x1800, 0x18fc,
 		0x3000, 0x302c,
 		0x3060, 0x30b0,
@@ -1973,7 +1977,7 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
 		0x5e50, 0x5e94,
 		0x5ea0, 0x5eb0,
 		0x5ec0, 0x5ec0,
-		0x5ec8, 0x5ecc,
+		0x5ec8, 0x5ed0,
 		0x6000, 0x6020,
 		0x6028, 0x6040,
 		0x6058, 0x609c,
@@ -2048,7 +2052,8 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
 		0x19150, 0x19194,
 		0x1919c, 0x191b0,
 		0x191d0, 0x191e8,
-		0x19238, 0x192b0,
+		0x19238, 0x19290,
+		0x192a4, 0x192b0,
 		0x192bc, 0x192bc,
 		0x19348, 0x1934c,
 		0x193f8, 0x19418,
@@ -2442,7 +2447,8 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
 		0x40280, 0x40280,
 		0x40304, 0x40304,
 		0x40330, 0x4033c,
-		0x41304, 0x413c8,
+		0x41304, 0x413b8,
+		0x413c0, 0x413c8,
 		0x413d0, 0x413dc,
 		0x413f0, 0x413f0,
 		0x41400, 0x4140c,
@@ -5254,7 +5260,7 @@ void t4_pmtx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[])
 	int i;
 	u32 data[2];
 
-	for (i = 0; i < PM_NSTATS; i++) {
+	for (i = 0; i < adap->params.arch.pm_stats_cnt; i++) {
 		t4_write_reg(adap, PM_TX_STAT_CONFIG_A, i + 1);
 		cnt[i] = t4_read_reg(adap, PM_TX_STAT_COUNT_A);
 		if (is_t4(adap->params.chip)) {
@@ -5281,7 +5287,7 @@ void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[])
 	int i;
 	u32 data[2];
 
-	for (i = 0; i < PM_NSTATS; i++) {
+	for (i = 0; i < adap->params.arch.pm_stats_cnt; i++) {
 		t4_write_reg(adap, PM_RX_STAT_CONFIG_A, i + 1);
 		cnt[i] = t4_read_reg(adap, PM_RX_STAT_COUNT_A);
 		if (is_t4(adap->params.chip)) {
@@ -5310,7 +5316,14 @@ unsigned int t4_get_mps_bg_map(struct adapter *adap, int idx)
 
 	if (n == 0)
 		return idx == 0 ? 0xf : 0;
-	if (n == 1)
+	/* In T6 (which is a 2 port card),
+	 * port 0 is mapped to channel 0 and port 1 is mapped to channel 1.
+	 * For 2 port T4/T5 adapter,
+	 * port 0 is mapped to channel 0 and 1,
+	 * port 1 is mapped to channel 2 and 3.
+	 */
+	if ((n == 1) &&
+	    (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5))
 		return idx < 2 ? (3 << (2 * idx)) : 0;
 	return 1 << idx;
 }
@@ -5689,6 +5702,39 @@ void t4_sge_decode_idma_state(struct adapter *adapter, int state)
 		"IDMA_FL_SEND_PADDING",
 		"IDMA_FL_SEND_COMPLETION_TO_IMSG",
 	};
+	static const char * const t6_decode[] = {
+		"IDMA_IDLE",
+		"IDMA_PUSH_MORE_CPL_FIFO",
+		"IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
+		"IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
+		"IDMA_PHYSADDR_SEND_PCIEHDR",
+		"IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
+		"IDMA_PHYSADDR_SEND_PAYLOAD",
+		"IDMA_FL_REQ_DATA_FL",
+		"IDMA_FL_DROP",
+		"IDMA_FL_DROP_SEND_INC",
+		"IDMA_FL_H_REQ_HEADER_FL",
+		"IDMA_FL_H_SEND_PCIEHDR",
+		"IDMA_FL_H_PUSH_CPL_FIFO",
+		"IDMA_FL_H_SEND_CPL",
+		"IDMA_FL_H_SEND_IP_HDR_FIRST",
+		"IDMA_FL_H_SEND_IP_HDR",
+		"IDMA_FL_H_REQ_NEXT_HEADER_FL",
+		"IDMA_FL_H_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_H_SEND_IP_HDR_PADDING",
+		"IDMA_FL_D_SEND_PCIEHDR",
+		"IDMA_FL_D_SEND_CPL_AND_IP_HDR",
+		"IDMA_FL_D_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_PCIEHDR",
+		"IDMA_FL_PUSH_CPL_FIFO",
+		"IDMA_FL_SEND_CPL",
+		"IDMA_FL_SEND_PAYLOAD_FIRST",
+		"IDMA_FL_SEND_PAYLOAD",
+		"IDMA_FL_REQ_NEXT_DATA_FL",
+		"IDMA_FL_SEND_NEXT_PCIEHDR",
+		"IDMA_FL_SEND_PADDING",
+		"IDMA_FL_SEND_COMPLETION_TO_IMSG",
+	};
 	static const u32 sge_regs[] = {
 		SGE_DEBUG_DATA_LOW_INDEX_2_A,
 		SGE_DEBUG_DATA_LOW_INDEX_3_A,
@@ -5697,6 +5743,32 @@ void t4_sge_decode_idma_state(struct adapter *adapter, int state)
 	const char **sge_idma_decode;
 	int sge_idma_decode_nstates;
 	int i;
+	unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
+
+	/* Select the right set of decode strings to dump depending on the
+	 * adapter chip type.
+	 */
+	switch (chip_version) {
+	case CHELSIO_T4:
+		sge_idma_decode = (const char **)t4_decode;
+		sge_idma_decode_nstates = ARRAY_SIZE(t4_decode);
+		break;
+
+	case CHELSIO_T5:
+		sge_idma_decode = (const char **)t5_decode;
+		sge_idma_decode_nstates = ARRAY_SIZE(t5_decode);
+		break;
+
+	case CHELSIO_T6:
+		sge_idma_decode = (const char **)t6_decode;
+		sge_idma_decode_nstates = ARRAY_SIZE(t6_decode);
+		break;
+
+	default:
+		dev_err(adapter->pdev_dev,
+			"Unsupported chip version %d\n", chip_version);
+		return;
+	}
 
 	if (is_t4(adapter->params.chip)) {
 		sge_idma_decode = (const char **)t4_decode;
@@ -6096,6 +6168,59 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
 	return t4_fw_restart(adap, mbox, reset);
 }
 
+/**
+ *	t4_fl_pkt_align - return the fl packet alignment
+ *	@adap: the adapter
+ *
+ *	T4 has a single field to specify the packing and padding boundary.
+ *	T5 onwards has separate fields for this and hence the alignment for
+ *	next packet offset is maximum of these two.
+ *
+ */
+int t4_fl_pkt_align(struct adapter *adap)
+{
+	u32 sge_control, sge_control2;
+	unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift;
+
+	sge_control = t4_read_reg(adap, SGE_CONTROL_A);
+
+	/* T4 uses a single control field to specify both the PCIe Padding and
+	 * Packing Boundary.  T5 introduced the ability to specify these
+	 * separately.  The actual Ingress Packet Data alignment boundary
+	 * within Packed Buffer Mode is the maximum of these two
+	 * specifications.  (Note that it makes no real practical sense to
+	 * have the Pading Boudary be larger than the Packing Boundary but you
+	 * could set the chip up that way and, in fact, legacy T4 code would
+	 * end doing this because it would initialize the Padding Boundary and
+	 * leave the Packing Boundary initialized to 0 (16 bytes).)
+	 * Padding Boundary values in T6 starts from 8B,
+	 * where as it is 32B for T4 and T5.
+	 */
+	if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
+		ingpad_shift = INGPADBOUNDARY_SHIFT_X;
+	else
+		ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X;
+
+	ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + ingpad_shift);
+
+	fl_align = ingpadboundary;
+	if (!is_t4(adap->params.chip)) {
+		/* T5 has a weird interpretation of one of the PCIe Packing
+		 * Boundary values.  No idea why ...
+		 */
+		sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
+		ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
+		if (ingpackboundary == INGPACKBOUNDARY_16B_X)
+			ingpackboundary = 16;
+		else
+			ingpackboundary = 1 << (ingpackboundary +
+						INGPACKBOUNDARY_SHIFT_X);
+
+		fl_align = max(ingpadboundary, ingpackboundary);
+	}
+	return fl_align;
+}
+
 /**
  *	t4_fixup_host_params - fix up host-dependent parameters
  *	@adap: the adapter
@@ -6114,6 +6239,7 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
 	unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
 	unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
 	unsigned int fl_align_log = fls(fl_align) - 1;
+	unsigned int ingpad;
 
 	t4_write_reg(adap, SGE_HOST_PAGE_SIZE_A,
 		     HOSTPAGESIZEPF0_V(sge_hps) |
@@ -6161,10 +6287,16 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
 			fl_align = 64;
 			fl_align_log = 6;
 		}
+
+		if (is_t5(adap->params.chip))
+			ingpad = INGPCIEBOUNDARY_32B_X;
+		else
+			ingpad = T6_INGPADBOUNDARY_32B_X;
+
 		t4_set_reg_field(adap, SGE_CONTROL_A,
 				 INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
 				 EGRSTATUSPAGESIZE_F,
-				 INGPADBOUNDARY_V(INGPCIEBOUNDARY_32B_X) |
+				 INGPADBOUNDARY_V(ingpad) |
 				 EGRSTATUSPAGESIZE_V(stat_len != 64));
 		t4_set_reg_field(adap, SGE_CONTROL2_A,
 				 INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
@@ -7060,7 +7192,12 @@ int t4_prep_adapter(struct adapter *adapter)
 				 NUM_MPS_CLS_SRAM_L_INSTANCES;
 		adapter->params.arch.mps_rplc_size = 128;
 		adapter->params.arch.nchan = NCHAN;
+		adapter->params.arch.pm_stats_cnt = PM_NSTATS;
 		adapter->params.arch.vfcount = 128;
+		/* Congestion map is for 4 channels so that
+		 * MPS can have 4 priority per port.
+		 */
+		adapter->params.arch.cng_ch_bits_log = 2;
 		break;
 	case CHELSIO_T5:
 		adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
@@ -7069,7 +7206,9 @@ int t4_prep_adapter(struct adapter *adapter)
 				 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
 		adapter->params.arch.mps_rplc_size = 128;
 		adapter->params.arch.nchan = NCHAN;
+		adapter->params.arch.pm_stats_cnt = PM_NSTATS;
 		adapter->params.arch.vfcount = 128;
+		adapter->params.arch.cng_ch_bits_log = 2;
 		break;
 	case CHELSIO_T6:
 		adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
@@ -7078,7 +7217,12 @@ int t4_prep_adapter(struct adapter *adapter)
 				 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
 		adapter->params.arch.mps_rplc_size = 256;
 		adapter->params.arch.nchan = 2;
+		adapter->params.arch.pm_stats_cnt = T6_PM_NSTATS;
 		adapter->params.arch.vfcount = 256;
+		/* Congestion map will be for 2 channels so that
+		 * MPS can have 8 priority per port.
+		 */
+		adapter->params.arch.cng_ch_bits_log = 3;
 		break;
 	default:
 		dev_err(adapter->pdev_dev, "Device %d is not supported\n",

drivers/net/ethernet/chelsio/cxgb4/t4_hw.h

@@ -48,6 +48,7 @@ enum {
 	NMTUS          = 16,    /* size of MTU table */
 	NCCTRL_WIN     = 32,    /* # of congestion control windows */
 	PM_NSTATS      = 5,     /* # of PM stats */
+	T6_PM_NSTATS   = 7,     /* # of PM stats in T6 */
 	MBOX_LEN       = 64,    /* mailbox size in bytes */
 	TRACE_LEN      = 112,   /* length of trace data and mask */
 	FILTER_OPT_LEN = 36,    /* filter tuple width for optional components */

drivers/net/ethernet/chelsio/cxgb4/t4_regs.h

@@ -492,6 +492,9 @@
 #define STATSOURCE_T5_V(x) ((x) << STATSOURCE_T5_S)
 #define STATSOURCE_T5_G(x) (((x) >> STATSOURCE_T5_S) & STATSOURCE_T5_M)
 
+#define T6_STATMODE_S    0
+#define T6_STATMODE_V(x) ((x) << T6_STATMODE_S)
+
 #define SGE_DBFIFO_STATUS2_A 0x1118
 
 #define HP_INT_THRESH_T5_S    10
@@ -2395,6 +2398,30 @@
 #define MPS_CLS_TCAM_DATA0_A 0xf000
 #define MPS_CLS_TCAM_DATA1_A 0xf004
 
+#define VIDL_S    16
+#define VIDL_M    0xffffU
+#define VIDL_G(x) (((x) >> VIDL_S) & VIDL_M)
+
+#define DATALKPTYPE_S    10
+#define DATALKPTYPE_M    0x3U
+#define DATALKPTYPE_G(x) (((x) >> DATALKPTYPE_S) & DATALKPTYPE_M)
+
+#define DATAPORTNUM_S    12
+#define DATAPORTNUM_M    0xfU
+#define DATAPORTNUM_G(x) (((x) >> DATAPORTNUM_S) & DATAPORTNUM_M)
+
+#define DATADIPHIT_S    8
+#define DATADIPHIT_V(x) ((x) << DATADIPHIT_S)
+#define DATADIPHIT_F    DATADIPHIT_V(1U)
+
+#define DATAVIDH2_S    7
+#define DATAVIDH2_V(x) ((x) << DATAVIDH2_S)
+#define DATAVIDH2_F    DATAVIDH2_V(1U)
+
+#define DATAVIDH1_S    0
+#define DATAVIDH1_M    0x7fU
+#define DATAVIDH1_G(x) (((x) >> DATAVIDH1_S) & DATAVIDH1_M)
+
 #define USED_S    16
 #define USED_M    0x7ffU
 #define USED_G(x) (((x) >> USED_S) & USED_M)

drivers/net/ethernet/chelsio/cxgb4/t4_values.h

@@ -53,6 +53,9 @@
 
 #define INGPADBOUNDARY_SHIFT_X		5
 
+#define T6_INGPADBOUNDARY_SHIFT_X	3
+#define T6_INGPADBOUNDARY_32B_X		2
+
 /* CONTROL2 register */
 #define INGPACKBOUNDARY_SHIFT_X		5
 #define INGPACKBOUNDARY_16B_X		0

drivers/net/ethernet/chelsio/cxgb4vf/sge.c

@@ -2607,7 +2607,7 @@ int t4vf_sge_init(struct adapter *adapter)
 	u32 fl0 = sge_params->sge_fl_buffer_size[0];
 	u32 fl1 = sge_params->sge_fl_buffer_size[1];
 	struct sge *s = &adapter->sge;
-	unsigned int ingpadboundary, ingpackboundary;
+	unsigned int ingpadboundary, ingpackboundary, ingpad_shift;
 
 	/*
 	 * Start by vetting the basic SGE parameters which have been set up by
@@ -2642,9 +2642,16 @@ int t4vf_sge_init(struct adapter *adapter)
 	 * could set the chip up that way and, in fact, legacy T4 code would
 	 * end doing this because it would initialize the Padding Boundary and
 	 * leave the Packing Boundary initialized to 0 (16 bytes).)
+	 * Padding Boundary values in T6 starts from 8B,
+	 * where as it is 32B for T4 and T5.
 	 */
+	if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
+		ingpad_shift = INGPADBOUNDARY_SHIFT_X;
+	else
+		ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X;
+
 	ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_params->sge_control) +
-			       INGPADBOUNDARY_SHIFT_X);
+			       ingpad_shift);
 	if (is_t4(adapter->params.chip)) {
 		s->fl_align = ingpadboundary;
 	} else {

drivers/net/ethernet/chelsio/cxgb4vf/t4vf_defs.h

@@ -54,6 +54,7 @@
 #define T4VF_MPS_BASE_ADDR	0x0100
 #define T4VF_PL_BASE_ADDR	0x0200
 #define T4VF_MBDATA_BASE_ADDR	0x0240
+#define T6VF_MBDATA_BASE_ADDR	0x0280
 #define T4VF_CIM_BASE_ADDR	0x0300
 
 #define T4VF_REGMAP_START	0x0000

drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c

@@ -120,12 +120,19 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
 		1, 1, 3, 5, 10, 10, 20, 50, 100
 	};
 
-	u32 v;
+	u32 v, mbox_data;
 	int i, ms, delay_idx;
 	const __be64 *p;
-	u32 mbox_data = T4VF_MBDATA_BASE_ADDR;
 	u32 mbox_ctl = T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL;
 
+	/* In T6, mailbox size is changed to 128 bytes to avoid
+	 * invalidating the entire prefetch buffer.
+	 */
+	if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
+		mbox_data = T4VF_MBDATA_BASE_ADDR;
+	else
+		mbox_data = T6VF_MBDATA_BASE_ADDR;
+
 	/*
 	 * Commands must be multiples of 16 bytes in length and may not be
 	 * larger than the size of the Mailbox Data register array.