Skip to content

L
linux
Commit 6a62de5f authored by Martin Hicks's avatar Martin Hicks Committed by David Mosberger
Browse files
Options

[PATCH] ia64: SN2 header file cleanups 

Here is a patch to clean up some of the Altix header files and includes.

I've run the patch past the appropriate people at SGI and they seem happy
with the changes.
parent 4235198e
Show whitespace changes
Inline Side-by-side
Showing with 18 additions and 930 deletions
arch/ia64/sn/io/drivers/ioconfig_bus.c
View file @ 6a62de5f
......@@ -16,6 +16,7 @@
#include <linux/pci.h>
#include <asm/uaccess.h>
#include <asm/sn/sgi.h>
#include <asm/io.h>
#include <asm/sn/iograph.h>
......
arch/ia64/sn/io/io.c
View file @ 6a62de5f
......@@ -12,7 +12,6 @@
#include <asm/sn/types.h>
#include <asm/sn/sgi.h>
#include <asm/sn/driver.h>
#include <asm/sn/iograph.h>
#include <asm/param.h>
#include <asm/sn/pio.h>
#include <asm/sn/xtalk/xwidget.h>
......
arch/ia64/sn/io/machvec/pci_bus_cvlink.c
View file @ 6a62de5f
......@@ -9,7 +9,6 @@
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <asm/sn/sgi.h>
#include <asm/sn/iograph.h>
#include <asm/sn/pci/pci_bus_cvlink.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/simulator.h>
......
arch/ia64/sn/io/sn2/bte_error.c
View file @ 6a62de5f
......@@ -12,7 +12,6 @@
#include <asm/smp.h>
#include <asm/sn/sgi.h>
#include <asm/sn/io.h>
#include <asm/sn/iograph.h>
#include <asm/sn/hcl.h>
#include <asm/sn/labelcl.h>
#include <asm/sn/sn_private.h>
......
arch/ia64/sn/io/sn2/geo_op.c
View file @ 6a62de5f
......@@ -27,7 +27,6 @@
#include <asm/hw_irq.h>
#include <asm/sn/types.h>
#include <asm/sn/sgi.h>
#include <asm/sn/iograph.h>
#include <asm/sn/hcl.h>
#include <asm/sn/labelcl.h>
#include <asm/sn/io.h>
......
arch/ia64/sn/io/sn2/klconflib.c
View file @ 6a62de5f
......@@ -474,8 +474,6 @@ board_serial_number_get(lboard_t *board,char *serial_number)
return(0);
}
#include "asm/sn/sn_private.h"
/*
* Format a module id for printing.
*
......
arch/ia64/sn/io/sn2/ml_SN_init.c
View file @ 6a62de5f
......@@ -11,7 +11,6 @@
#include <linux/bootmem.h>
#include <asm/sn/sgi.h>
#include <asm/sn/io.h>
#include <asm/sn/iograph.h>
#include <asm/sn/hcl.h>
#include <asm/sn/labelcl.h>
#include <asm/sn/sn_private.h>
......
arch/ia64/sn/io/sn2/pcibr/pcibr_ate.c
View file @ 6a62de5f
......@@ -8,7 +8,6 @@
#include <linux/types.h>
#include <asm/sn/sgi.h>
#include <asm/sn/iograph.h>
#include <asm/sn/pci/pciio.h>
#include <asm/sn/pci/pcibr.h>
#include <asm/sn/pci/pcibr_private.h>
......
arch/ia64/sn/io/sn2/pcibr/pcibr_config.c
View file @ 6a62de5f
......@@ -8,7 +8,6 @@
#include <linux/types.h>
#include <asm/sn/sgi.h>
#include <asm/sn/iograph.h>
#include <asm/sn/pci/pciio.h>
#include <asm/sn/pci/pcibr.h>
#include <asm/sn/pci/pcibr_private.h>
......
arch/ia64/sn/io/sn2/pcibr/pcibr_intr.c
View file @ 6a62de5f
......@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <asm/sn/sgi.h>
#include <asm/sn/arch.h>
#include <asm/sn/iograph.h>
#include <asm/sn/pci/pciio.h>
#include <asm/sn/pci/pcibr.h>
#include <asm/sn/pci/pcibr_private.h>
......
arch/ia64/sn/io/sn2/pcibr/pcibr_reg.c
View file @ 6a62de5f
......@@ -8,7 +8,6 @@
#include <linux/types.h>
#include <asm/sn/sgi.h>
#include <asm/sn/iograph.h>
#include <asm/sn/addrs.h>
#include <asm/sn/pci/pcibr.h>
#include <asm/sn/pci/pcibr_private.h>
......
arch/ia64/sn/io/sn2/pcibr/pcibr_rrb.c
View file @ 6a62de5f
......@@ -8,7 +8,6 @@
#include <linux/types.h>
#include <asm/sn/sgi.h>
#include <asm/sn/iograph.h>
#include <asm/sn/pci/pciio.h>
#include <asm/sn/pci/pcibr.h>
#include <asm/sn/pci/pcibr_private.h>
......
arch/ia64/sn/io/sn2/shub.c
View file @ 6a62de5f
......@@ -17,7 +17,6 @@
#include <asm/system.h>
#include <asm/sn/sgi.h>
#include <asm/uaccess.h>
#include <asm/sn/iograph.h>
#include <asm/sn/hcl.h>
#include <asm/sn/labelcl.h>
#include <asm/sn/io.h>
......
arch/ia64/sn/io/sn2/shub_intr.c
View file @ 6a62de5f
......@@ -11,7 +11,6 @@
#include <asm/sn/types.h>
#include <asm/sn/sgi.h>
#include <asm/sn/driver.h>
#include <asm/sn/iograph.h>
#include <asm/param.h>
#include <asm/sn/pio.h>
#include <asm/sn/xtalk/xwidget.h>
......
arch/ia64/sn/io/sn2/shuberror.c
View file @ 6a62de5f
......@@ -16,7 +16,6 @@
#include <asm/delay.h>
#include <asm/sn/sgi.h>
#include <asm/sn/io.h>
#include <asm/sn/iograph.h>
#include <asm/sn/hcl.h>
#include <asm/sn/labelcl.h>
#include <asm/sn/sn_private.h>
......
arch/ia64/sn/io/xswitch.c
View file @ 6a62de5f
......@@ -11,7 +11,6 @@
#include <asm/errno.h>
#include <asm/sn/sgi.h>
#include <asm/sn/driver.h>
#include <asm/sn/iograph.h>
#include <asm/sn/hcl.h>
#include <asm/sn/labelcl.h>
#include <asm/sn/xtalk/xtalk.h>
......
arch/ia64/sn/kernel/irq.c
View file @ 6a62de5f
......@@ -18,7 +18,6 @@
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/sn/sgi.h>
#include <asm/sn/iograph.h>
#include <asm/sn/hcl.h>
#include <asm/sn/types.h>
#include <asm/sn/pci/pciio.h>
......
include/asm-ia64/sn/clksupport.h
View file @ 6a62de5f
......@@ -24,17 +24,16 @@
#define _ASM_IA64_SN_CLKSUPPORT_H
#include <asm/sn/arch.h>
#include <asm/sn/addrs.h>
#include <asm/sn/sn2/addrs.h>
#include <asm/sn/sn2/shubio.h>
#include <asm/sn/sn2/shub_mmr.h>
typedef long clkreg_t;
extern unsigned long sn_rtc_cycles_per_second;
extern unsigned long sn_rtc_per_itc;
#include <asm/sn/addrs.h>
#include <asm/sn/sn2/addrs.h>
#include <asm/sn/sn2/shubio.h>
#include <asm/sn/sn2/shub_mmr.h>
#define RTC_MASK SH_RTC_MASK
#define RTC_COUNTER_ADDR ((clkreg_t*)LOCAL_MMR_ADDR(SH_RTC))
#define RTC_COMPARE_A_ADDR ((clkreg_t*)LOCAL_MMR_ADDR(SH_RTC))
......
include/asm-ia64/sn/dmamap.h
View file @ 6a62de5f
......@@ -8,12 +8,6 @@
#ifndef _ASM_IA64_SN_DMAMAP_H
#define _ASM_IA64_SN_DMAMAP_H
#include <asm/sn/types.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Definitions for allocating, freeing, and using DMA maps
*/
......@@ -43,10 +37,6 @@ typedef struct dmamap {
unsigned long dma_virtaddr; /* Beginning virtual address that is mapped */
} dmamap_t;
#ifdef __cplusplus
}
#endif
/* standard flags values for pio_map routines,
* including {xtalk,pciio}_dmamap calls.
* NOTE: try to keep these in step with PIOMAP flags.
......
include/asm-ia64/sn/driver.h
View file @ 6a62de5f
......@@ -23,10 +23,6 @@ typedef struct device_driver_s *device_driver_t;
/* == Driver thread priority support == */
typedef int ilvl_t;
#ifdef __cplusplus
extern "C" {
#endif
struct eframe_s;
struct piomap;
struct dmamap;
......
include/asm-ia64/sn/intr.h
View file @ 6a62de5f
......@@ -8,7 +8,6 @@
#ifndef _ASM_IA64_SN_INTR_H
#define _ASM_IA64_SN_INTR_H
#include <linux/config.h>
#include <asm/sn/sn2/intr.h>
extern void sn_send_IPI_phys(long, int, int);
......
include/asm-ia64/sn/io.h
View file @ 6a62de5f
......@@ -9,8 +9,6 @@
#ifndef _ASM_IA64_SN_IO_H
#define _ASM_IA64_SN_IO_H
#include <linux/config.h>
#include <asm/sn/addrs.h>
/* Because we only have PCI I/O ports. */
......
include/asm-ia64/sn/ioc4.h
View file @ 6a62de5f
......@@ -9,682 +9,6 @@
#ifndef _ASM_IA64_SN_IOC4_H
#define _ASM_IA64_SN_IOC4_H
#if 0
/*
* ioc4.h - IOC4 chip header file
*/
/* Notes:
* The IOC4 chip is a 32-bit PCI device that provides 4 serial ports,
* an IDE bus interface, a PC keyboard/mouse interface, and a real-time
* external interrupt interface.
*
* It includes an optimized DMA buffer management, and a store-and-forward
* buffer RAM.
*
* All IOC4 registers are 32 bits wide.
*/
typedef __uint32_t ioc4reg_t;
/*
* PCI Configuration Space Register Address Map, use offset from IOC4 PCI
* configuration base such that this can be used for multiple IOC4s
*/
#define IOC4_PCI_ID 0x0 /* ID */
#define IOC4_VENDOR_ID_NUM 0x10A9
#define IOC4_DEVICE_ID_NUM 0x100A
#define IOC4_ADDRSPACE_MASK 0xfff00000ULL
#define IOC4_PCI_SCR 0x4 /* Status/Command */
#define IOC4_PCI_REV 0x8 /* Revision */
#define IOC4_PCI_LAT 0xC /* Latency Timer */
#define IOC4_PCI_BAR0 0x10 /* IOC4 base address 0 */
#define IOC4_PCI_SIDV 0x2c /* Subsys ID and vendor */
#define IOC4_PCI_CAP 0x34 /* Capability pointer */
#define IOC4_PCI_LATGNTINT 0x3c /* Max_lat, min_gnt, int_pin, int_line */
/*
* PCI Memory Space Map
*/
#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */
#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0)
#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1)
#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5)
#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6)
/* Master IDs contained in PCI_ERR_ADDR_MST_ID_MSK */
#define IOC4_MST_ID_S0_TX 0
#define IOC4_MST_ID_S0_RX 1
#define IOC4_MST_ID_S1_TX 2
#define IOC4_MST_ID_S1_RX 3
#define IOC4_MST_ID_S2_TX 4
#define IOC4_MST_ID_S2_RX 5
#define IOC4_MST_ID_S3_TX 6
#define IOC4_MST_ID_S3_RX 7
#define IOC4_MST_ID_ATA 8
#define IOC4_PCI_ERR_ADDR_H 0x004 /* High Error Address */
#define IOC4_SIO_IR 0x008 /* SIO Interrupt Register */
#define IOC4_OTHER_IR 0x00C /* Other Interrupt Register */
/* These registers are read-only for general kernel code. To modify
* them use the functions in ioc4.c
*/
#define IOC4_SIO_IES_RO 0x010 /* SIO Interrupt Enable Set Reg */
#define IOC4_OTHER_IES_RO 0x014 /* Other Interrupt Enable Set Reg */
#define IOC4_SIO_IEC_RO 0x018 /* SIO Interrupt Enable Clear Reg */
#define IOC4_OTHER_IEC_RO 0x01C /* Other Interrupt Enable Clear Reg */
#define IOC4_SIO_CR 0x020 /* SIO Control Reg */
#define IOC4_INT_OUT 0x028 /* INT_OUT Reg (realtime interrupt) */
#define IOC4_GPCR_S 0x030 /* GenericPIO Cntrl Set Register */
#define IOC4_GPCR_C 0x034 /* GenericPIO Cntrl Clear Register */
#define IOC4_GPDR 0x038 /* GenericPIO Data Register */
#define IOC4_GPPR_0 0x040 /* GenericPIO Pin Registers */
#define IOC4_GPPR_OFF 0x4
#define IOC4_GPPR(x) (IOC4_GPPR_0+(x)*IOC4_GPPR_OFF)
/* ATAPI Registers */
#define IOC4_ATA_0 0x100 /* Data w/timing */
#define IOC4_ATA_1 0x104 /* Error/Features w/timing */
#define IOC4_ATA_2 0x108 /* Sector Count w/timing */
#define IOC4_ATA_3 0x10C /* Sector Number w/timing */
#define IOC4_ATA_4 0x110 /* Cyliner Low w/timing */
#define IOC4_ATA_5 0x114 /* Cylinder High w/timing */
#define IOC4_ATA_6 0x118 /* Device/Head w/timing */
#define IOC4_ATA_7 0x11C /* Status/Command w/timing */
#define IOC4_ATA_0_AUX 0x120 /* Aux Status/Device Cntrl w/timing */
#define IOC4_ATA_TIMING 0x140 /* Timing value register 0 */
#define IOC4_ATA_DMA_PTR_L 0x144 /* Low Memory Pointer to DMA List */
#define IOC4_ATA_DMA_PTR_H 0x148 /* High Memory Pointer to DMA List */
#define IOC4_ATA_DMA_ADDR_L 0x14C /* Low Memory DMA Address */
#define IOC4_ATA_DMA_ADDR_H 0x150 /* High Memory DMA Addresss */
#define IOC4_ATA_BC_DEV 0x154 /* DMA Byte Count at Device */
#define IOC4_ATA_BC_MEM 0x158 /* DMA Byte Count at Memory */
#define IOC4_ATA_DMA_CTRL 0x15C /* DMA Control/Status */
/* Keyboard and Mouse Registers */
#define IOC4_KM_CSR 0x200 /* Kbd and Mouse Cntrl/Status Reg */
#define IOC4_K_RD 0x204 /* Kbd Read Data Register */
#define IOC4_M_RD 0x208 /* Mouse Read Data Register */
#define IOC4_K_WD 0x20C /* Kbd Write Data Register */
#define IOC4_M_WD 0x210 /* Mouse Write Data Register */
/* Serial Port Registers used for DMA mode serial I/O */
#define IOC4_SBBR01_H 0x300 /* Serial Port Ring Buffers
Base Reg High for Channels 0 1*/
#define IOC4_SBBR01_L 0x304 /* Serial Port Ring Buffers
Base Reg Low for Channels 0 1 */
#define IOC4_SBBR23_H 0x308 /* Serial Port Ring Buffers
Base Reg High for Channels 2 3*/
#define IOC4_SBBR23_L 0x30C /* Serial Port Ring Buffers
Base Reg Low for Channels 2 3 */
#define IOC4_SSCR_0 0x310 /* Serial Port 0 Control */
#define IOC4_STPIR_0 0x314 /* Serial Port 0 TX Produce */
#define IOC4_STCIR_0 0x318 /* Serial Port 0 TX Consume */
#define IOC4_SRPIR_0 0x31C /* Serial Port 0 RX Produce */
#define IOC4_SRCIR_0 0x320 /* Serial Port 0 RX Consume */
#define IOC4_SRTR_0 0x324 /* Serial Port 0 Receive Timer Reg */
#define IOC4_SHADOW_0 0x328 /* Serial Port 0 16550 Shadow Reg */
#define IOC4_SSCR_1 0x32C /* Serial Port 1 Control */
#define IOC4_STPIR_1 0x330 /* Serial Port 1 TX Produce */
#define IOC4_STCIR_1 0x334 /* Serial Port 1 TX Consume */
#define IOC4_SRPIR_1 0x338 /* Serial Port 1 RX Produce */
#define IOC4_SRCIR_1 0x33C /* Serial Port 1 RX Consume */
#define IOC4_SRTR_1 0x340 /* Serial Port 1 Receive Timer Reg */
#define IOC4_SHADOW_1 0x344 /* Serial Port 1 16550 Shadow Reg */
#define IOC4_SSCR_2 0x348 /* Serial Port 2 Control */
#define IOC4_STPIR_2 0x34C /* Serial Port 2 TX Produce */
#define IOC4_STCIR_2 0x350 /* Serial Port 2 TX Consume */
#define IOC4_SRPIR_2 0x354 /* Serial Port 2 RX Produce */
#define IOC4_SRCIR_2 0x358 /* Serial Port 2 RX Consume */
#define IOC4_SRTR_2 0x35C /* Serial Port 2 Receive Timer Reg */
#define IOC4_SHADOW_2 0x360 /* Serial Port 2 16550 Shadow Reg */
#define IOC4_SSCR_3 0x364 /* Serial Port 3 Control */
#define IOC4_STPIR_3 0x368 /* Serial Port 3 TX Produce */
#define IOC4_STCIR_3 0x36C /* Serial Port 3 TX Consume */
#define IOC4_SRPIR_3 0x370 /* Serial Port 3 RX Produce */
#define IOC4_SRCIR_3 0x374 /* Serial Port 3 RX Consume */
#define IOC4_SRTR_3 0x378 /* Serial Port 3 Receive Timer Reg */
#define IOC4_SHADOW_3 0x37C /* Serial Port 3 16550 Shadow Reg */
#define IOC4_UART0_BASE 0x380 /* UART 0 */
#define IOC4_UART1_BASE 0x388 /* UART 1 */
#define IOC4_UART2_BASE 0x390 /* UART 2 */
#define IOC4_UART3_BASE 0x398 /* UART 3 */
/* Private page address aliases for usermode mapping */
#define IOC4_INT_OUT_P 0x04000 /* INT_OUT Reg */
#define IOC4_SSCR_0_P 0x08000 /* Serial Port 0 */
#define IOC4_STPIR_0_P 0x08004
#define IOC4_STCIR_0_P 0x08008 /* (read-only) */
#define IOC4_SRPIR_0_P 0x0800C /* (read-only) */
#define IOC4_SRCIR_0_P 0x08010
#define IOC4_SRTR_0_P 0x08014
#define IOC4_UART_LSMSMCR_0_P 0x08018 /* (read-only) */
#define IOC4_SSCR_1_P 0x0C000 /* Serial Port 1 */
#define IOC4_STPIR_1_P 0x0C004
#define IOC4_STCIR_1_P 0x0C008 /* (read-only) */
#define IOC4_SRPIR_1_P 0x0C00C /* (read-only) */
#define IOC4_SRCIR_1_P 0x0C010
#define IOC4_SRTR_1_P 0x0C014
#define IOC4_UART_LSMSMCR_1_P 0x0C018 /* (read-only) */
#define IOC4_SSCR_2_P 0x10000 /* Serial Port 2 */
#define IOC4_STPIR_2_P 0x10004
#define IOC4_STCIR_2_P 0x10008 /* (read-only) */
#define IOC4_SRPIR_2_P 0x1000C /* (read-only) */
#define IOC4_SRCIR_2_P 0x10010
#define IOC4_SRTR_2_P 0x10014
#define IOC4_UART_LSMSMCR_2_P 0x10018 /* (read-only) */
#define IOC4_SSCR_3_P 0x14000 /* Serial Port 3 */
#define IOC4_STPIR_3_P 0x14004
#define IOC4_STCIR_3_P 0x14008 /* (read-only) */
#define IOC4_SRPIR_3_P 0x1400C /* (read-only) */
#define IOC4_SRCIR_3_P 0x14010
#define IOC4_SRTR_3_P 0x14014
#define IOC4_UART_LSMSMCR_3_P 0x14018 /* (read-only) */
#define IOC4_ALIAS_PAGE_SIZE 0x4000
/* Interrupt types */
typedef enum ioc4_intr_type_e {
ioc4_sio_intr_type,
ioc4_other_intr_type,
ioc4_num_intr_types
} ioc4_intr_type_t;
#define ioc4_first_intr_type ioc4_sio_intr_type
/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */
#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */
#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */
#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */
#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */
#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */
#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */
#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */
#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */
#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */
#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */
#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */
#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */
#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */
#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */
#define IOC4_SIO_IR_S1_INT 0x00004000 /* */
#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */
#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */
#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */
#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */
#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */
#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */
#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */
#define IOC4_SIO_IR_S2_INT 0x00400000 /* */
#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */
#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */
#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */
#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */
#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */
#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */
#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */
#define IOC4_SIO_IR_S3_INT 0x40000000 /* */
#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */
/* Per device interrupt masks */
#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \
IOC4_SIO_IR_S0_RX_FULL | \
IOC4_SIO_IR_S0_RX_HIGH | \
IOC4_SIO_IR_S0_RX_TIMER | \
IOC4_SIO_IR_S0_DELTA_DCD | \
IOC4_SIO_IR_S0_DELTA_CTS | \
IOC4_SIO_IR_S0_INT | \
IOC4_SIO_IR_S0_TX_EXPLICIT)
#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \
IOC4_SIO_IR_S1_RX_FULL | \
IOC4_SIO_IR_S1_RX_HIGH | \
IOC4_SIO_IR_S1_RX_TIMER | \
IOC4_SIO_IR_S1_DELTA_DCD | \
IOC4_SIO_IR_S1_DELTA_CTS | \
IOC4_SIO_IR_S1_INT | \
IOC4_SIO_IR_S1_TX_EXPLICIT)
#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \
IOC4_SIO_IR_S2_RX_FULL | \
IOC4_SIO_IR_S2_RX_HIGH | \
IOC4_SIO_IR_S2_RX_TIMER | \
IOC4_SIO_IR_S2_DELTA_DCD | \
IOC4_SIO_IR_S2_DELTA_CTS | \
IOC4_SIO_IR_S2_INT | \
IOC4_SIO_IR_S2_TX_EXPLICIT)
#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \
IOC4_SIO_IR_S3_RX_FULL | \
IOC4_SIO_IR_S3_RX_HIGH | \
IOC4_SIO_IR_S3_RX_TIMER | \
IOC4_SIO_IR_S3_DELTA_DCD | \
IOC4_SIO_IR_S3_DELTA_CTS | \
IOC4_SIO_IR_S3_INT | \
IOC4_SIO_IR_S3_TX_EXPLICIT)
/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Kbd/mouse intr */
#define IOC4_OTHER_IR_ATA_DMAINT 0x00000089 /* ATAPI DMA intr */
#define IOC4_OTHER_IR_RT_INT 0x00800000 /* RT output pulse */
#define IOC4_OTHER_IR_GEN_INT1 0x02000000 /* RT input pulse */
#define IOC4_OTHER_IR_GEN_INT_SHIFT 25
/* Per device interrupt masks */
#define IOC4_OTHER_IR_ATA (IOC4_OTHER_IR_ATA_INT | \
IOC4_OTHER_IR_ATA_MEMERR | \
IOC4_OTHER_IR_ATA_DMAINT)
#define IOC4_OTHER_IR_RT (IOC4_OTHER_IR_RT_INT | IOC4_OTHER_IR_GEN_INT1)
/* Macro to load pending interrupts */
#define IOC4_PENDING_SIO_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
PCI_INW(&((mem)->sio_ies_ro)))
#define IOC4_PENDING_OTHER_INTRS(mem) (PCI_INW(&((mem)->other_ir)) & \
PCI_INW(&((mem)->other_ies_ro)))
/* Bitmasks for IOC4_SIO_CR */
#define IOC4_SIO_SR_CMD_PULSE 0x00000004 /* Byte bus strobe length */
#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0
#define IOC4_SIO_CR_ARB_DIAG 0x00000070 /* Current non-ATA PCI bus
requester (ro) */
#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000
#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010
#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020
#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030
#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040
#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050
#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060
#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070
#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among
serial ports (ro) */
#define IOC4_SIO_CR_ATA_DIAG_IDLE 0x00000100 /* 0 -> active request from
ATA port */
#define IOC4_SIO_CR_ATA_DIAG_ACTIVE 0x00000200 /* 1 -> ATA request is winner */
/* Bitmasks for IOC4_INT_OUT */
#define IOC4_INT_OUT_COUNT 0x0000ffff /* Pulse interval timer */
#define IOC4_INT_OUT_MODE 0x00070000 /* Mode mask */
#define IOC4_INT_OUT_MODE_0 0x00000000 /* Set output to 0 */
#define IOC4_INT_OUT_MODE_1 0x00040000 /* Set output to 1 */
#define IOC4_INT_OUT_MODE_1PULSE 0x00050000 /* Send 1 pulse */
#define IOC4_INT_OUT_MODE_PULSES 0x00060000 /* Send 1 pulse every interval */
#define IOC4_INT_OUT_MODE_SQW 0x00070000 /* Toggle output every interval */
#define IOC4_INT_OUT_DIAG 0x40000000 /* Diag mode */
#define IOC4_INT_OUT_INT_OUT 0x80000000 /* Current state of INT_OUT */
/* Time constants for IOC4_INT_OUT */
#define IOC4_INT_OUT_NS_PER_TICK (15 * 520) /* 15 ns PCI clock, multi=520 */
#define IOC4_INT_OUT_TICKS_PER_PULSE 3 /* Outgoing pulse lasts 3
ticks */
#define IOC4_INT_OUT_US_TO_COUNT(x) /* Convert uS to a count value */ \
(((x) * 10 + IOC4_INT_OUT_NS_PER_TICK / 200) * \
100 / IOC4_INT_OUT_NS_PER_TICK - 1)
#define IOC4_INT_OUT_COUNT_TO_US(x) /* Convert count value to uS */ \
(((x) + 1) * IOC4_INT_OUT_NS_PER_TICK / 1000)
#define IOC4_INT_OUT_MIN_TICKS 3 /* Min period is width of
pulse in "ticks" */
#define IOC4_INT_OUT_MAX_TICKS IOC4_INT_OUT_COUNT /* Largest possible count */
/* Bitmasks for IOC4_GPCR */
#define IOC4_GPCR_DIR 0x000000ff /* Tristate pin in or out */
#define IOC4_GPCR_DIR_PIN(x) (1<<(x)) /* Access one of the DIR bits */
#define IOC4_GPCR_EDGE 0x0000ff00 /* Extint edge or level
sensitive */
#define IOC4_GPCR_EDGE_PIN(x) (1<<((x)+7 )) /* Access one of the EDGE bits */
/* Values for IOC4_GPCR */
#define IOC4_GPCR_INT_OUT_EN 0x00100000 /* Enable INT_OUT to pin 0 */
#define IOC4_GPCR_DIR_SER0_XCVR 0x00000010 /* Port 0 Transceiver select
enable */
#define IOC4_GPCR_DIR_SER1_XCVR 0x00000020 /* Port 1 Transceiver select
enable */
#define IOC4_GPCR_DIR_SER2_XCVR 0x00000040 /* Port 2 Transceiver select
enable */
#define IOC4_GPCR_DIR_SER3_XCVR 0x00000080 /* Port 3 Transceiver select
enable */
/* Defs for some of the generic I/O pins */
#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0
mode sel */
#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1
mode sel */
#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2
mode sel */
#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3
mode sel */
#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling
uart 0 mode select */
#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling
uart 1 mode select */
#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling
uart 2 mode select */
#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling
uart 3 mode select */
/* Bitmasks for IOC4_ATA_TIMING */
#define IOC4_ATA_TIMING_ADR_SETUP 0x00000003 /* Clocks of addr set-up */
#define IOC4_ATA_TIMING_PULSE_WIDTH 0x000001f8 /* Clocks of read or write
pulse width */
#define IOC4_ATA_TIMING_RECOVERY 0x0000fe00 /* Clocks before next read
or write */
#define IOC4_ATA_TIMING_USE_IORDY 0x00010000 /* PIO uses IORDY */
/* Bitmasks for address list elements pointed to by IOC4_ATA_DMA_PTR_<L|H> */
#define IOC4_ATA_ALE_DMA_ADDRESS 0xfffffffffffffffe
/* Bitmasks for byte count list elements pointed to by IOC4_ATA_DMA_PTR_<L|H> */
#define IOC4_ATA_BCLE_BYTE_COUNT 0x000000000000fffe
#define IOC4_ATA_BCLE_LIST_END 0x0000000080000000
/* Bitmasks for IOC4_ATA_BC_<DEV|MEM> */
#define IOC4_ATA_BC_BYTE_CNT 0x0001fffe /* Byte count */
/* Bitmasks for IOC4_ATA_DMA_CTRL */
#define IOC4_ATA_DMA_CTRL_STRAT 0x00000001 /* 1 -> start DMA engine */
#define IOC4_ATA_DMA_CTRL_STOP 0x00000002 /* 1 -> stop DMA engine */
#define IOC4_ATA_DMA_CTRL_DIR 0x00000004 /* 1 -> ATA bus data copied
to memory */
#define IOC4_ATA_DMA_CTRL_ACTIVE 0x00000008 /* DMA channel is active */
#define IOC4_ATA_DMA_CTRL_MEM_ERROR 0x00000010 /* DMA engine encountered
a PCI error */
/* Bitmasks for IOC4_KM_CSR */
#define IOC4_KM_CSR_K_WRT_PEND 0x00000001 /* Kbd port xmitting or resetting */
#define IOC4_KM_CSR_M_WRT_PEND 0x00000002 /* Mouse port xmitting or resetting */
#define IOC4_KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */
#define IOC4_KM_CSR_M_LCB 0x00000008 /* Same for mouse */
#define IOC4_KM_CSR_K_DATA 0x00000010 /* State of kbd data line */
#define IOC4_KM_CSR_K_CLK 0x00000020 /* State of kbd clock line */
#define IOC4_KM_CSR_K_PULL_DATA 0x00000040 /* Pull kbd data line low */
#define IOC4_KM_CSR_K_PULL_CLK 0x00000080 /* Pull kbd clock line low */
#define IOC4_KM_CSR_M_DATA 0x00000100 /* State of mouse data line */
#define IOC4_KM_CSR_M_CLK 0x00000200 /* State of mouse clock line */
#define IOC4_KM_CSR_M_PULL_DATA 0x00000400 /* Pull mouse data line low */
#define IOC4_KM_CSR_M_PULL_CLK 0x00000800 /* Pull mouse clock line low */
#define IOC4_KM_CSR_EMM_MODE 0x00001000 /* Emulation mode */
#define IOC4_KM_CSR_SIM_MODE 0x00002000 /* Clock X8 */
#define IOC4_KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */
#define IOC4_KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */
#define IOC4_KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */
#define IOC4_KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */
#define IOC4_KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN =
cause SIO_IR to assert */
#define IOC4_KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN =
cause SIO_IR to assert */
#define IOC4_KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */
#define IOC4_KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */
#define IOC4_KM_CSR_K_CLAMP_THREE \
0x00400000 /* Pull K_CLK low after rec. three chars */
#define IOC4_KM_CSR_M_CLAMP_THREE \
0x00800000 /* Pull M_CLK low after rec. three char */
/* Bitmasks for IOC4_K_RD and IOC4_M_RD */
#define IOC4_KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */
#define IOC4_KM_RD_DATA_2_SHIFT 0
#define IOC4_KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */
#define IOC4_KM_RD_DATA_1_SHIFT 8
#define IOC4_KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */
#define IOC4_KM_RD_DATA_0_SHIFT 16
#define IOC4_KM_RD_FRAME_ERR_2 0x01000000 /* Framing or parity error in byte 2 */
#define IOC4_KM_RD_FRAME_ERR_1 0x02000000 /* Same for byte 1 */
#define IOC4_KM_RD_FRAME_ERR_0 0x04000000 /* Same for byte 0 */
#define IOC4_KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */
#define IOC4_KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */
#define IOC4_KM_RD_VALID_2 0x20000000 /* DATA_2 valid */
#define IOC4_KM_RD_VALID_1 0x40000000 /* DATA_1 valid */
#define IOC4_KM_RD_VALID_0 0x80000000 /* DATA_0 valid */
#define IOC4_KM_RD_VALID_ALL (IOC4_KM_RD_VALID_0 | IOC4_KM_RD_VALID_1 | \
IOC4_KM_RD_VALID_2)
/* Bitmasks for IOC4_K_WD & IOC4_M_WD */
#define IOC4_KM_WD_WRT_DATA 0x000000ff /* Write to keyboard/mouse port */
#define IOC4_KM_WD_WRT_DATA_SHIFT 0
/* Bitmasks for serial RX status byte */
#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */
#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */
#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */
#define IOC4_RXSB_BREAK 0x08 /* Break character */
#define IOC4_RXSB_CTS 0x10 /* State of CTS */
#define IOC4_RXSB_DCD 0x20 /* State of DCD */
#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */
#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR & BREAK valid */
/* Bitmasks for serial TX control byte */
#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */
#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */
#define IOC4_TXCB_VALID 0x40 /* Byte is valid */
#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control register */
#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */
/* Bitmasks for IOC4_SBBR_L */
#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
#define IOC4_SBBR_L_BASE 0xfffff000 /* Lower serial ring base addr */
/* Bitmasks for IOC4_SSCR_<3:0> */
#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */
#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */
#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */
#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */
#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */
#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */
#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */
#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */
#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */
#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */
/* All producer/comsumer pointers are the same bitfield */
#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */
#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */
#define IOC4_PROD_CONS_PTR_OFF 3
/* Bitmasks for IOC4_STPIR_<3:0> */
/* Reserved for future register definitions */
/* Bitmasks for IOC4_STCIR_<3:0> */
#define IOC4_STCIR_BYTE_CNT 0x0f000000 /* Bytes in unpacker */
#define IOC4_STCIR_BYTE_CNT_SHIFT 24
/* Bitmasks for IOC4_SRPIR_<3:0> */
#define IOC4_SRPIR_BYTE_CNT 0x0f000000 /* Bytes in packer */
#define IOC4_SRPIR_BYTE_CNT_SHIFT 24
/* Bitmasks for IOC4_SRCIR_<3:0> */
#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */
/* Bitmasks for IOC4_SHADOW_<3:0> */
#define IOC4_SHADOW_DR 0x00000001 /* Data ready */
#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */
#define IOC4_SHADOW_PE 0x00000004 /* Parity error */
#define IOC4_SHADOW_FE 0x00000008 /* Framing error */
#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */
#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */
#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */
#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */
#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */
#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */
#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */
#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */
#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */
#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */
#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */
/* Bitmasks for IOC4_SRTR_<3:0> */
#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */
#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */
#define IOC4_SRTR_CNT_VAL_SHIFT 16
#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */
/* Serial port register map used for DMA and PIO serial I/O */
typedef volatile struct ioc4_serialregs {
ioc4reg_t sscr;
ioc4reg_t stpir;
ioc4reg_t stcir;
ioc4reg_t srpir;
ioc4reg_t srcir;
ioc4reg_t srtr;
ioc4reg_t shadow;
} ioc4_sregs_t;
/* IOC4 UART register map */
typedef volatile struct ioc4_uartregs {
union {
char rbr; /* read only, DLAB == 0 */
char thr; /* write only, DLAB == 0 */
char dll; /* DLAB == 1 */
} u1;
union {
char ier; /* DLAB == 0 */
char dlm; /* DLAB == 1 */
} u2;
union {
char iir; /* read only */
char fcr; /* write only */
} u3;
char i4u_lcr;
char i4u_mcr;
char i4u_lsr;
char i4u_msr;
char i4u_scr;
} ioc4_uart_t;
#define i4u_rbr u1.rbr
#define i4u_thr u1.thr
#define i4u_dll u1.dll
#define i4u_ier u2.ier
#define i4u_dlm u2.dlm
#define i4u_iir u3.iir
#define i4u_fcr u3.fcr
/* PCI config space register map */
typedef volatile struct ioc4_configregs {
ioc4reg_t pci_id;
ioc4reg_t pci_scr;
ioc4reg_t pci_rev;
ioc4reg_t pci_lat;
ioc4reg_t pci_bar0;
ioc4reg_t pci_bar1;
ioc4reg_t pci_bar2_not_implemented;
ioc4reg_t pci_cis_ptr_not_implemented;
ioc4reg_t pci_sidv;
ioc4reg_t pci_rom_bar_not_implemented;
ioc4reg_t pci_cap;
ioc4reg_t pci_rsv;
ioc4reg_t pci_latgntint;
char pci_fill1[0x58 - 0x3c - 4];
ioc4reg_t pci_pcix;
ioc4reg_t pci_pcixstatus;
} ioc4_cfg_t;
/* PCI memory space register map addressed using pci_bar0 */
typedef volatile struct ioc4_memregs {
/* Miscellaneous IOC4 registers */
ioc4reg_t pci_err_addr_l;
ioc4reg_t pci_err_addr_h;
ioc4reg_t sio_ir;
ioc4reg_t other_ir;
/* These registers are read-only for general kernel code. To
* modify them use the functions in ioc4.c.
*/
ioc4reg_t sio_ies_ro;
ioc4reg_t other_ies_ro;
ioc4reg_t sio_iec_ro;
ioc4reg_t other_iec_ro;
ioc4reg_t sio_cr;
ioc4reg_t misc_fill1;
ioc4reg_t int_out;
ioc4reg_t misc_fill2;
ioc4reg_t gpcr_s;
ioc4reg_t gpcr_c;
ioc4reg_t gpdr;
ioc4reg_t misc_fill3;
ioc4reg_t gppr_0;
ioc4reg_t gppr_1;
ioc4reg_t gppr_2;
ioc4reg_t gppr_3;
ioc4reg_t gppr_4;
ioc4reg_t gppr_5;
ioc4reg_t gppr_6;
ioc4reg_t gppr_7;
char misc_fill4[0x100 - 0x5C - 4];
/* ATA/ATAP registers */
ioc4reg_t ata_0;
ioc4reg_t ata_1;
ioc4reg_t ata_2;
ioc4reg_t ata_3;
ioc4reg_t ata_4;
ioc4reg_t ata_5;
ioc4reg_t ata_6;
ioc4reg_t ata_7;
ioc4reg_t ata_aux;
char ata_fill1[0x140 - 0x120 - 4];
ioc4reg_t ata_timing;
ioc4reg_t ata_dma_ptr_l;
ioc4reg_t ata_dma_ptr_h;
ioc4reg_t ata_dma_addr_l;
ioc4reg_t ata_dma_addr_h;
ioc4reg_t ata_bc_dev;
ioc4reg_t ata_bc_mem;
ioc4reg_t ata_dma_ctrl;
char ata_fill2[0x200 - 0x15C - 4];
/* Keyboard and mouse registers */
ioc4reg_t km_csr;
ioc4reg_t k_rd;
ioc4reg_t m_rd;
ioc4reg_t k_wd;
ioc4reg_t m_wd;
char km_fill1[0x300 - 0x210 - 4];
/* Serial port registers used for DMA serial I/O */
ioc4reg_t sbbr01_l;
ioc4reg_t sbbr01_h;
ioc4reg_t sbbr23_l;
ioc4reg_t sbbr23_h;
ioc4_sregs_t port_0;
ioc4_sregs_t port_1;
ioc4_sregs_t port_2;
ioc4_sregs_t port_3;
ioc4_uart_t uart_0;
ioc4_uart_t uart_1;
ioc4_uart_t uart_2;
ioc4_uart_t uart_3;
} ioc4_mem_t;
#endif /* 0 */
/*
* Bytebus device space
*/
......@@ -693,88 +17,4 @@ typedef volatile struct ioc4_memregs {
#define IOC4_BYTEBUS_DEV2 0xC0000L /* Addressed using pci_bar0 */
#define IOC4_BYTEBUS_DEV3 0xE0000L /* Addressed using pci_bar0 */
#if 0
/* UART clock speed */
#define IOC4_SER_XIN_CLK 66000000
typedef enum ioc4_subdevs_e {
ioc4_subdev_generic,
ioc4_subdev_kbms,
ioc4_subdev_tty0,
ioc4_subdev_tty1,
ioc4_subdev_tty2,
ioc4_subdev_tty3,
ioc4_subdev_rt,
ioc4_nsubdevs
} ioc4_subdev_t;
/* Subdevice disable bits,
* from the standard INFO_LBL_SUBDEVS
*/
#define IOC4_SDB_TTY0 (1 << ioc4_subdev_tty0)
#define IOC4_SDB_TTY1 (1 << ioc4_subdev_tty1)
#define IOC4_SDB_TTY2 (1 << ioc4_subdev_tty2)
#define IOC4_SDB_TTY3 (1 << ioc4_subdev_tty3)
#define IOC4_SDB_KBMS (1 << ioc4_subdev_kbms)
#define IOC4_SDB_RT (1 << ioc4_subdev_rt)
#define IOC4_SDB_GENERIC (1 << ioc4_subdev_generic)
#define IOC4_ALL_SUBDEVS ((1 << ioc4_nsubdevs) - 1)
#define IOC4_SDB_SERIAL (IOC4_SDB_TTY0 | IOC4_SDB_TTY1 | IOC4_SDB_TTY2 | IOC4_SDB_TTY3)
#define IOC4_STD_SUBDEVS IOC4_ALL_SUBDEVS
#define IOC4_INTA_SUBDEVS (IOC4_SDB_SERIAL | IOC4_SDB_KBMS | IOC4_SDB_RT | IOC4_SDB_GENERIC)
extern int ioc4_subdev_enabled(vertex_hdl_t, ioc4_subdev_t);
extern void ioc4_subdev_enables(vertex_hdl_t, ulong_t);
extern void ioc4_subdev_enable(vertex_hdl_t, ioc4_subdev_t);
extern void ioc4_subdev_disable(vertex_hdl_t, ioc4_subdev_t);
/* Macros to read and write the SIO_IEC and SIO_IES registers (see the
* comments in ioc4.c for details on why this is necessary
*/
#define IOC4_W_IES 0
#define IOC4_W_IEC 1
extern void ioc4_write_ireg(void *, ioc4reg_t, int, ioc4_intr_type_t);
#define IOC4_WRITE_IES(ioc4, val, type) ioc4_write_ireg(ioc4, val, IOC4_W_IES, type)
#define IOC4_WRITE_IEC(ioc4, val, type) ioc4_write_ireg(ioc4, val, IOC4_W_IEC, type)
typedef void
ioc4_intr_func_f (intr_arg_t, ioc4reg_t);
typedef void
ioc4_intr_connect_f (vertex_hdl_t conn_vhdl,
ioc4_intr_type_t,
ioc4reg_t,
ioc4_intr_func_f *,
intr_arg_t info,
vertex_hdl_t owner_vhdl,
vertex_hdl_t intr_dev_vhdl,
int (*)(intr_arg_t));
typedef void
ioc4_intr_disconnect_f (vertex_hdl_t conn_vhdl,
ioc4_intr_type_t,
ioc4reg_t,
ioc4_intr_func_f *,
intr_arg_t info,
vertex_hdl_t owner_vhdl);
ioc4_intr_disconnect_f ioc4_intr_disconnect;
ioc4_intr_connect_f ioc4_intr_connect;
extern int ioc4_is_console(vertex_hdl_t conn_vhdl);
extern void ioc4_mlreset(ioc4_cfg_t *, ioc4_mem_t *);
extern intr_func_f ioc4_intr;
extern ioc4_mem_t *ioc4_mem_ptr(void *ioc4_fastinfo);
typedef ioc4_intr_func_f *ioc4_intr_func_t;
#endif /* 0 */
#endif /* _ASM_IA64_SN_IOC4_H */
include/asm-ia64/sn/ioconfig_bus.h
View file @ 6a62de5f
......@@ -20,7 +20,7 @@ struct ioconfig_parm {
void *buffer;
};
struct ascii_moduleid{
struct ascii_moduleid {
unsigned char io_moduleid[8]; /* pci path name */
};
......
include/asm-ia64/sn/ioerror_handling.h
View file @ 6a62de5f
......@@ -11,7 +11,7 @@
#include <linux/types.h>
#include <asm/sn/sgi.h>
#if __KERNEL__
#ifdef __KERNEL__
/*
* Basic types required for io error handling interfaces.
......@@ -155,88 +155,5 @@ enum error_class_e {
ERROR_CLASS_BAD_RESP_PKT
};
typedef uint64_t error_class_t;
/*
* Error context which the error action can use.
*/
typedef void *error_context_t;
#define ERROR_CONTEXT_IGNORE ((error_context_t)-1ll)
/*
* Error action type.
*/
typedef error_return_code_t (*error_action_f)( error_context_t);
#define ERROR_ACTION_IGNORE ((error_action_f)-1ll)
/* Typical set of error actions */
typedef struct error_action_set_s {
error_action_f eas_panic;
error_action_f eas_shutdown;
error_action_f eas_abort;
error_action_f eas_retry;
error_action_f eas_failover;
error_action_f eas_log_n_ignore;
error_action_f eas_reset;
} error_action_set_t;
/* Set of priorites for in case mutliple error actions/states
* are trying to be prescribed for a device.
* NOTE : The ordering below encapsulates the priorities. Highest value
* corresponds to highest priority.
*/
enum error_priority_e {
ERROR_PRIORITY_IGNORE,
ERROR_PRIORITY_NONE,
ERROR_PRIORITY_NORMAL,
ERROR_PRIORITY_LOG,
ERROR_PRIORITY_FAILOVER,
ERROR_PRIORITY_RETRY,
ERROR_PRIORITY_ABORT,
ERROR_PRIORITY_SHUTDOWN,
ERROR_PRIORITY_RESTART,
ERROR_PRIORITY_PANIC
};
typedef uint64_t error_priority_t;
/* Error action interfaces */
extern error_return_code_t error_action_set(vertex_hdl_t,
error_action_f,
error_context_t,
error_priority_t);
extern error_return_code_t error_action_perform(vertex_hdl_t);
#define INFO_LBL_ERROR_SKIP_ENV "error_skip_env"
#define v_error_skip_env_get(v, l) \
hwgraph_info_get_LBL(v, INFO_LBL_ERROR_SKIP_ENV, (arbitrary_info_t *)&l)
#define v_error_skip_env_set(v, l, r) \
(r ? \
hwgraph_info_replace_LBL(v, INFO_LBL_ERROR_SKIP_ENV, (arbitrary_info_t)l,0) :\
hwgraph_info_add_LBL(v, INFO_LBL_ERROR_SKIP_ENV, (arbitrary_info_t)l))
#define v_error_skip_env_clear(v) \
hwgraph_info_remove_LBL(v, INFO_LBL_ERROR_SKIP_ENV, 0)
typedef uint64_t counter_t;
extern counter_t error_retry_count_get(vertex_hdl_t);
extern error_return_code_t error_retry_count_set(vertex_hdl_t,counter_t);
extern counter_t error_retry_count_increment(vertex_hdl_t);
extern counter_t error_retry_count_decrement(vertex_hdl_t);
/* Except for the PIO Read error typically the other errors are handled in
* the context of an asynchronous error interrupt.
*/
#define IS_ERROR_INTR_CONTEXT(_ec) ((_ec & IOECODE_DMA) || \
(_ec == IOECODE_PIO_WRITE))
#endif /* __KERNEL__ */
#endif /* _ASM_IA64_SN_IOERROR_HANDLING_H */
include/asm-ia64/sn/iograph.h
View file @ 6a62de5f
......@@ -8,6 +8,8 @@
#ifndef _ASM_IA64_SN_IOGRAPH_H
#define _ASM_IA64_SN_IOGRAPH_H
#include <asm/sn/xtalk/xbow.h> /* For get MAX_PORT_NUM */
/*
* During initialization, platform-dependent kernel code establishes some
* basic elements of the hardware graph. This file contains edge and
......@@ -115,40 +117,13 @@
#define INFO_LBL_XSWITCH_VOL "_xswitch_volunteer"
#define INFO_LBL_XFUNCS "_xtalk_ops" /* ops vector for gio providers */
#define INFO_LBL_XWIDGET "_xwidget"
/* Device/Driver Admin directive labels */
#define ADMIN_LBL_INTR_TARGET "INTR_TARGET" /* Target cpu for device interrupts*/
#define ADMIN_LBL_INTR_SWLEVEL "INTR_SWLEVEL" /* Priority level of the ithread */
#define ADMIN_LBL_DMATRANS_NODE "PCIBUS_DMATRANS_NODE" /* Node used for
* 32-bit Direct
* Mapping I/O
*/
#define ADMIN_LBL_DISABLED "DISABLE" /* Device has been disabled */
#define ADMIN_LBL_DETACH "DETACH" /* Device has been detached */
#define ADMIN_LBL_THREAD_PRI "thread_priority"
/* Driver adminstrator
* hint parameter for
* thread priority
*/
#define ADMIN_LBL_THREAD_CLASS "thread_class"
/* Driver adminstrator
* hint parameter for
* thread priority
* default class
*/
/* Info labels that begin with '_' cannot be overwritten by an attr_set call */
#define INFO_LBL_RESERVED(name) ((name)[0] == '_')
#if defined(__KERNEL__)
#ifdef __KERNEL__
void init_all_devices(void);
#endif /* __KERNEL__ */
#include <asm/sn/sgi.h>
#include <asm/sn/xtalk/xbow.h> /* For get MAX_PORT_NUM */
int io_brick_map_widget(int, int);
int io_path_map_widget(vertex_hdl_t);
/*
* Map a brick's widget number to a meaningful int
......@@ -159,5 +134,4 @@ struct io_brick_map_s {
int ibm_map_wid[MAX_PORT_NUM]; /* wid to int map */
};
#endif /* _ASM_IA64_SN_IOGRAPH_H */
include/asm-ia64/sn/leds.h
View file @ 6a62de5f
......@@ -8,10 +8,7 @@
* Copyright (C) 2000-2003 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/config.h>
#include <asm/smp.h>
#include <asm/sn/addrs.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/pda.h>
#include <asm/sn/sn2/shub.h>
......@@ -23,7 +20,7 @@
#define LED_ALWAYS_SET 0x00
/*
* Basic macros for flashing the LEDS on an SGI, SN1.
* Basic macros for flashing the LEDS on an SGI SN.
*/
static __inline__ void
......
include/asm-ia64/sn/module.h
View file @ 6a62de5f
......@@ -8,12 +8,6 @@
#ifndef _ASM_IA64_SN_MODULE_H
#define _ASM_IA64_SN_MODULE_H
#ifdef __cplusplus
extern "C" {
#endif
#include <asm/semaphore.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/ksys/elsc.h>
......
include/asm-ia64/sn/sgi.h
View file @ 6a62de5f
......@@ -13,7 +13,6 @@
#include <linux/config.h>
#include <asm/sn/types.h>
#include <asm/uaccess.h> /* for copy_??_user */
#include <asm/sn/hwgfs.h>
typedef hwgfs_handle_t vertex_hdl_t;
......
include/asm-ia64/sn/sn2/sn_private.h
View file @ 6a62de5f
......@@ -11,6 +11,7 @@
#include <linux/wait.h>
#include <asm/sn/nodepda.h>
#include <asm/sn/io.h>
#include <asm/sn/iograph.h>
#include <asm/sn/xtalk/xwidget.h>
#include <asm/sn/xtalk/xtalk_private.h>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7