ath5k: move ath5k_hw_calibration_poll to base.c

It's not a phy related funtion; It has more to do with the interrupt handler
and tasklet scheduling, so it belongs to base.c.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath5k/ath5k.h

@@ -1254,7 +1254,6 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
 int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
 			   struct ieee80211_channel *channel);
-void ath5k_hw_calibration_poll(struct ath5k_hw *ah);
 /* Spur mitigation */
 bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
 				  struct ieee80211_channel *channel);

drivers/net/wireless/ath/ath5k/base.c

@@ -2625,6 +2625,19 @@ ath5k_stop_hw(struct ath5k_softc *sc)
 	return ret;
 }
 
+static void
+ath5k_intr_calibration_poll(struct ath5k_hw *ah)
+{
+	if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
+		ah->ah_cal_next_full = jiffies +
+			msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
+		tasklet_schedule(&ah->ah_sc->calib);
+	}
+	/* we could use SWI to generate enough interrupts to meet our
+	 * calibration interval requirements, if necessary:
+	 * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
+}
+
 static irqreturn_t
 ath5k_intr(int irq, void *dev_id)
 {
@@ -2689,7 +2702,7 @@ ath5k_intr(int irq, void *dev_id)
 	if (unlikely(!counter))
 		ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
 
-	ath5k_hw_calibration_poll(ah);
+	ath5k_intr_calibration_poll(ah);
 
 	return IRQ_HANDLED;
 }

drivers/net/wireless/ath/ath5k/phy.c

@@ -1102,19 +1102,6 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
   PHY calibration
 \*****************/
 
-void
-ath5k_hw_calibration_poll(struct ath5k_hw *ah)
-{
-	if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
-		ah->ah_cal_next_full = jiffies +
-			msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
-		tasklet_schedule(&ah->ah_sc->calib);
-	}
-	/* we could use SWI to generate enough interrupts to meet our
-	 * calibration interval requirements, if necessary:
-	 * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
-}
-
 static int sign_extend(int val, const int nbits)
 {
 	int order = BIT(nbits-1);