Skip to content

L
linux
Commit 6af905f8 authored by Jamie Lenehan's avatar Jamie Lenehan Committed by James Bottomley
Browse files
Options

[PATCH] dc395x [4/5] - debugging cleanup 

Clean up debugging statements. Work on making output consistent - use
the same format each time the same bit of information is output and
output the same bits of information in the same order each time it's
output. Update a lot of the actual messages to include useful
information and to explain better what some things are. Remove some
old comments and commented out code. Remove some of the debugging
states. Find few instance of spaces that should have been tabs and
trailing white space and remove them.
parent 9e181b63
Show whitespace changes
Inline Side-by-side
Showing with 436 additions and 573 deletions
drivers/scsi/dc395x.c
View file @ 6af905f8
......@@ -82,9 +82,7 @@
#define DBG_KG 0x0001
#define DBG_0 0x0002
#define DBG_1 0x0004
#define DBG_DCB 0x0008
#define DBG_PARSE 0x0010 /* debug command line parsing */
#define DBG_SGPARANOIA 0x0020
#define DBG_SG 0x0020
#define DBG_FIFO 0x0040
#define DBG_PIO 0x0080
......@@ -93,7 +91,7 @@
* Set set of things to output debugging for.
* Undefine to remove all debugging
*/
/*#define DEBUG_MASK (DBG_0|DBG_1|DBG_DCB|DBG_PARSE|DBG_SGPARANOIA|DBG_FIFO|DBG_PIO)*/
/*#define DEBUG_MASK (DBG_0|DBG_1|DBG_SG|DBG_FIFO|DBG_PIO)*/
/*#define DEBUG_MASK DBG_0*/
......@@ -370,7 +368,7 @@ static void disconnect(struct AdapterCtlBlk *acb);
static void reselect(struct AdapterCtlBlk *acb);
static u8 start_scsi(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb);
static void build_srb(Scsi_Cmnd * cmd, struct DeviceCtlBlk *dcb,
static void build_srb(Scsi_Cmnd *cmd, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb);
static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_code,
Scsi_Cmnd *cmd, u8 force);
......@@ -393,7 +391,6 @@ static void waiting_timeout(unsigned long ptr);
Static Data
---------------------------------------------------------------------------*/
static u16 current_sync_offset = 0;
static char monitor_next_irq = 0;
static void *dc395x_scsi_phase0[] = {
data_out_phase0,/* phase:0 */
......@@ -591,7 +588,9 @@ static void __init fix_settings(void)
{
int i;
dprintkdbg(DBG_PARSE, "setup %08x %08x %08x %08x %08x %08x\n",
dprintkdbg(DBG_1,
"setup: AdapterId=%08x MaxSpeed=%08x DevMode=%08x "
"AdapterMode=%08x Tags=%08x ResetDelay=%08x\n",
cfg_data[CFG_ADAPTER_ID].value,
cfg_data[CFG_MAX_SPEED].value,
cfg_data[CFG_DEV_MODE].value,
......@@ -749,15 +748,12 @@ inline static struct ScsiReqBlk *find_cmd(Scsi_Cmnd *cmd,
static struct ScsiReqBlk *srb_get_free(struct AdapterCtlBlk *acb)
{
struct list_head *head = &acb->srb_free_list;
struct ScsiReqBlk *srb;
struct ScsiReqBlk *srb = NULL;
if (!list_empty(head)) {
srb = list_entry(head->next, struct ScsiReqBlk, list);
list_del(head->next);
dprintkdbg(DBG_0, "srb_get_free: got srb %p\n", srb);
} else {
srb = NULL;
dprintkl(KERN_ERR, "Out of Free SRBs :-(\n");
dprintkdbg(DBG_0, "srb_get_free: srb=%p\n", srb);
}
return srb;
}
......@@ -765,7 +761,7 @@ static struct ScsiReqBlk *srb_get_free(struct AdapterCtlBlk *acb)
static void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_free_insert: put srb %p\n", srb);
dprintkdbg(DBG_0, "srb_free_insert: srb=%p\n", srb);
list_add_tail(&srb->list, &acb->srb_free_list);
}
......@@ -773,7 +769,8 @@ static void srb_free_insert(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_waiting_insert: srb %p cmd %li\n", srb, srb->cmd->pid);
dprintkdbg(DBG_0, "srb_waiting_insert: (pid#%li) <%02i-%i> srb=%p\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
list_add(&srb->list, &dcb->srb_waiting_list);
}
......@@ -781,15 +778,16 @@ static void srb_waiting_insert(struct DeviceCtlBlk *dcb,
static void srb_waiting_append(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_waiting_append: srb %p cmd %li\n",
srb, srb->cmd->pid);
dprintkdbg(DBG_0, "srb_waiting_append: (pid#%li) <%02i-%i> srb=%p\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
list_add_tail(&srb->list, &dcb->srb_waiting_list);
}
static void srb_going_append(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_going_append: srb %p\n", srb);
dprintkdbg(DBG_0, "srb_going_append: (pid#%li) <%02i-%i> srb=%p\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
list_add_tail(&srb->list, &dcb->srb_going_list);
}
......@@ -798,7 +796,8 @@ static void srb_going_remove(struct DeviceCtlBlk *dcb, struct ScsiReqBlk *srb)
{
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
dprintkdbg(DBG_0, "srb_going_remove: srb %p\n", srb);
dprintkdbg(DBG_0, "srb_going_remove: (pid#%li) <%02i-%i> srb=%p\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
list_for_each_entry_safe(i, tmp, &dcb->srb_going_list, list)
if (i == srb) {
......@@ -813,7 +812,8 @@ static void srb_waiting_remove(struct DeviceCtlBlk *dcb,
{
struct ScsiReqBlk *i;
struct ScsiReqBlk *tmp;
dprintkdbg(DBG_0, "srb_waiting_remove: srb %p\n", srb);
dprintkdbg(DBG_0, "srb_waiting_remove: (pid#%li) <%02i-%i> srb=%p\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
list_for_each_entry_safe(i, tmp, &dcb->srb_waiting_list, list)
if (i == srb) {
......@@ -826,8 +826,9 @@ static void srb_waiting_remove(struct DeviceCtlBlk *dcb,
static void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_going_to_waiting_move: srb %p, pid = %li\n",
srb, srb->cmd->pid);
dprintkdbg(DBG_0,
"srb_going_to_waiting_move: (pid#%li) <%02i-%i> srb=%p\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
list_move(&srb->list, &dcb->srb_waiting_list);
}
......@@ -835,7 +836,9 @@ static void srb_going_to_waiting_move(struct DeviceCtlBlk *dcb,
static void srb_waiting_to_going_move(struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
dprintkdbg(DBG_0, "srb_waiting_to_going_move: srb %p\n", srb);
dprintkdbg(DBG_0,
"srb_waiting_to_going_move: (pid#%li) <%02i-%i> srb=%p\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
list_move(&srb->list, &dcb->srb_going_list);
}
......@@ -928,7 +931,8 @@ static void waiting_timeout(unsigned long ptr)
{
unsigned long flags;
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)ptr;
dprintkdbg(DBG_KG, "Debug: Waiting queue woken up by timer.\n");
dprintkdbg(DBG_1,
"waiting_timeout: Queue woken up by timer. acb=%p\n", acb);
DC395x_LOCK_IO(acb->scsi_host, flags);
waiting_process_next(acb);
DC395x_UNLOCK_IO(acb->scsi_host, flags);
......@@ -969,7 +973,8 @@ static void build_srb(Scsi_Cmnd *cmd, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
int dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
dprintkdbg(DBG_0, "build_srb...\n");
dprintkdbg(DBG_0, "build_srb: (pid#%li) <%02i-%i>\n",
cmd->pid, dcb->target_id, dcb->target_lun);
srb->dcb = dcb;
srb->cmd = cmd;
......@@ -990,7 +995,8 @@ static void build_srb(Scsi_Cmnd *cmd, struct DeviceCtlBlk *dcb,
srb->end_message = 0;
if (dir == PCI_DMA_NONE || !cmd->request_buffer) {
dprintkdbg(DBG_0, "srb[A] len=%d buf=%p use_sg=%d !MAP=%08x\n",
dprintkdbg(DBG_0,
"build_srb: [0] len=%d buf=%p use_sg=%d !MAP=%08x\n",
cmd->bufflen, cmd->request_buffer,
cmd->use_sg, srb->segment_x[0].address);
} else if (cmd->use_sg) {
......@@ -1001,7 +1007,8 @@ static void build_srb(Scsi_Cmnd *cmd, struct DeviceCtlBlk *dcb,
struct SGentry *sgp = srb->segment_x;
srb->sg_count = pci_map_sg(dcb->acb->dev, sl, cmd->use_sg,
dir);
dprintkdbg(DBG_0, "srb[B] len=%d buf=%p use_sg=%d segs=%d\n",
dprintkdbg(DBG_0,
"build_srb: [n] len=%d buf=%p use_sg=%d segs=%d\n",
reqlen, cmd->request_buffer, cmd->use_sg,
srb->sg_count);
......@@ -1036,7 +1043,7 @@ static void build_srb(Scsi_Cmnd *cmd, struct DeviceCtlBlk *dcb,
SEGMENTX_LEN,
PCI_DMA_TODEVICE);
dprintkdbg(DBG_SGPARANOIA, "srb[B] map sg %p->%08x(%05x)\n",
dprintkdbg(DBG_SG, "build_srb: [n] map sg %p->%08x(%05x)\n",
srb->segment_x, srb->sg_bus_addr, SEGMENTX_LEN);
} else {
srb->total_xfer_length = cmd->request_bufflen;
......@@ -1051,14 +1058,14 @@ static void build_srb(Scsi_Cmnd *cmd, struct DeviceCtlBlk *dcb,
srb->segment_x[0].length = srb->total_xfer_length;
srb->virt_addr = cmd->request_buffer;
dprintkdbg(DBG_0, "srb[C] len=%d buf=%p use_sg=%d map=%08x\n",
dprintkdbg(DBG_0,
"build_srb: [1] len=%d buf=%p use_sg=%d map=%08x\n",
srb->total_xfer_length, cmd->request_buffer,
cmd->use_sg, srb->segment_x[0].address);
}
}
/**
* dc395x_queue_command - queue scsi command passed from the mid
* layer, invoke 'done' on completion
......@@ -1084,12 +1091,8 @@ static int dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
struct ScsiReqBlk *srb;
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
dprintkdbg(DBG_0, "Queue Cmd=%02x,Tgt=%d,LUN=%d (pid=%li)\n",
cmd->cmnd[0],
cmd->device->id,
cmd->device->lun,
cmd->pid);
dprintkdbg(DBG_0, "queue_command: (pid#%li) <%02i-%i> cmnd=0x%02x\n",
cmd->pid, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
/* Assume BAD_TARGET; will be cleared later */
cmd->result = DID_BAD_TARGET << 16;
......@@ -1103,8 +1106,8 @@ static int dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
/* does the specified lun on the specified device exist */
if (!(acb->dcb_map[cmd->device->id] & (1 << cmd->device->lun))) {
dprintkl(KERN_INFO, "Ignore target %02x lun %02x\n", cmd->device->id,
cmd->device->lun);
dprintkl(KERN_INFO, "queue_command: Ignore target <%02i-%i>\n",
cmd->device->id, cmd->device->lun);
goto complete;
}
......@@ -1112,9 +1115,8 @@ static int dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
if (!dcb) {
/* should never happen */
dprintkl(KERN_ERR, "no DCB failed, target %02x lun %02x\n",
dprintkl(KERN_ERR, "queue_command: No such device <%02i-%i>",
cmd->device->id, cmd->device->lun);
dprintkl(KERN_ERR, "No DCB in queuecommand (2)!\n");
goto complete;
}
......@@ -1129,7 +1131,7 @@ static int dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
* Return 1 since we are unable to queue this command at this
* point in time.
*/
dprintkdbg(DBG_0, "No free SRB's in queuecommand\n");
dprintkdbg(DBG_0, "queue_command: No free srb's\n");
return 1;
}
......@@ -1143,7 +1145,7 @@ static int dc395x_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
/* process immediately */
send_srb(acb, srb);
}
dprintkdbg(DBG_1, "... command (pid %li) queued successfully.\n", cmd->pid);
dprintkdbg(DBG_1, "queue_command: (pid#%li) done\n", cmd->pid);
return 0;
complete:
......@@ -1202,60 +1204,57 @@ static void dump_register_info(struct AdapterCtlBlk *acb,
srb = dcb->active_srb;
if (srb) {
if (!srb->cmd)
dprintkl(KERN_INFO, "dump: SRB %p: cmd %p OOOPS!\n", srb,
srb->cmd);
dprintkl(KERN_INFO, "dump: srb=%p cmd=%p OOOPS!\n",
srb, srb->cmd);
else
dprintkl(KERN_INFO, "dump: SRB %p: cmd %p pid %li: %02x (%02i-%i)\n",
dprintkl(KERN_INFO, "dump: srb=%p cmd=%p (pid#%li) "
"cmnd=0x%02x <%02i-%i>\n",
srb, srb->cmd, srb->cmd->pid,
srb->cmd->cmnd[0], srb->cmd->device->id,
srb->cmd->device->lun);
printk(" SGList %p Cnt %i Idx %i Len %i\n",
printk(" sglist=%p cnt=%i idx=%i len=%i\n",
srb->segment_x, srb->sg_count, srb->sg_index,
srb->total_xfer_length);
printk
(" State %04x Status %02x Phase %02x (%sconn.)\n",
printk(" state=0x%04x status=0x%02x phase=0x%02x (%sconn.)\n",
srb->state, srb->status, srb->scsi_phase,
(acb->active_dcb) ? "" : "not");
}
dprintkl(KERN_INFO, "dump: SCSI block\n");
printk
(" Status %04x FIFOCnt %02x Signals %02x IRQStat %02x\n",
dprintkl(KERN_INFO, "dump: SCSI{status=0x%04x fifocnt=0x%02x "
"signals=0x%02x irqstat=0x%02x sync=0x%02x target=0x%02x "
"rselid=0x%02x ctr=0x%08x irqen=0x%02x config=0x%04x "
"config2=0x%02x cmd=0x%02x selto=0x%02x}\n",
DC395x_read16(acb, TRM_S1040_SCSI_STATUS),
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL),
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS));
printk
(" Sync %02x Target %02x RSelID %02x SCSICtr %08x\n",
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS),
DC395x_read8(acb, TRM_S1040_SCSI_SYNC),
DC395x_read8(acb, TRM_S1040_SCSI_TARGETID),
DC395x_read8(acb, TRM_S1040_SCSI_IDMSG),
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER));
printk
(" IRQEn %02x Config %04x Cfg2 %02x Cmd %02x SelTO %02x\n",
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
DC395x_read8(acb, TRM_S1040_SCSI_INTEN),
DC395x_read16(acb, TRM_S1040_SCSI_CONFIG0),
DC395x_read8(acb, TRM_S1040_SCSI_CONFIG2),
DC395x_read8(acb, TRM_S1040_SCSI_COMMAND),
DC395x_read8(acb, TRM_S1040_SCSI_TIMEOUT));
dprintkl(KERN_INFO, "dump: DMA block\n");
printk
(" Cmd %04x FIFOCnt %02x FStat %02x IRQStat %02x IRQEn %02x Cfg %04x\n",
dprintkl(KERN_INFO, "dump: DMA{cmd=0x%04x fifocnt=0x%02x fstat=0x%02x "
"irqstat=0x%02x irqen=0x%02x cfg=0x%04x tctr=0x%08x "
"ctctr=0x%08x addr=0x%08x:0x%08x}\n",
DC395x_read16(acb, TRM_S1040_DMA_COMMAND),
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
DC395x_read8(acb, TRM_S1040_DMA_STATUS),
DC395x_read8(acb, TRM_S1040_DMA_INTEN),
DC395x_read16(acb, TRM_S1040_DMA_CONFIG));
printk(" TCtr %08x CTCtr %08x Addr %08x%08x\n",
DC395x_read16(acb, TRM_S1040_DMA_CONFIG),
DC395x_read32(acb, TRM_S1040_DMA_XCNT),
DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
DC395x_read32(acb, TRM_S1040_DMA_XHIGHADDR),
DC395x_read32(acb, TRM_S1040_DMA_XLOWADDR));
dprintkl(KERN_INFO, "dump: Misc: GCtrl %02x GStat %02x GTmr %02x\n",
dprintkl(KERN_INFO, "dump: gen{gctrl=0x%02x gstat=0x%02x gtmr=0x%02x} "
"pci{status=0x%04x}\n",
DC395x_read8(acb, TRM_S1040_GEN_CONTROL),
DC395x_read8(acb, TRM_S1040_GEN_STATUS),
DC395x_read8(acb, TRM_S1040_GEN_TIMER));
dprintkl(KERN_INFO, "dump: PCI Status %04x\n", pstat);
DC395x_read8(acb, TRM_S1040_GEN_TIMER),
pstat);
}
......@@ -1266,7 +1265,7 @@ static inline void clear_fifo(struct AdapterCtlBlk *acb, char *txt)
u8 fifocnt = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
if (!(fifocnt & 0x40))
dprintkdbg(DBG_FIFO,
"Clr FIFO (%i bytes) on phase %02x in %s\n",
"clear_fifo: (%i bytes) on phase %02x in %s\n",
fifocnt & 0x3f, lines, txt);
#endif
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRFIFO);
......@@ -1277,8 +1276,8 @@ static void reset_dev_param(struct AdapterCtlBlk *acb)
{
struct DeviceCtlBlk *dcb;
struct NvRamType *eeprom = &acb->eeprom;
dprintkdbg(DBG_0, "reset_dev_param: acb=%p\n", acb);
dprintkdbg(DBG_0, "reset_dev_param..............\n");
list_for_each_entry(dcb, &acb->dcb_list, list) {
u8 period_index;
......@@ -1301,12 +1300,13 @@ static void reset_dev_param(struct AdapterCtlBlk *acb)
* @cmd - some command for this host (for fetching hooks)
* Returns: SUCCESS (0x2002) on success, else FAILED (0x2003).
*/
static int dc395x_eh_bus_reset(Scsi_Cmnd * cmd)
static int dc395x_eh_bus_reset(Scsi_Cmnd *cmd)
{
struct AdapterCtlBlk *acb;
dprintkl(KERN_INFO, "reset requested!\n");
acb = (struct AdapterCtlBlk *)cmd->device->host->hostdata;
struct AdapterCtlBlk *acb =
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
dprintkl(KERN_INFO,
"eh_bus_reset: (pid#%li) target=<%02i-%i> cmd=%p\n",
cmd->pid, cmd->device->id, cmd->device->lun, cmd);
if (timer_pending(&acb->waiting_timer))
del_timer(&acb->waiting_timer);
......@@ -1332,7 +1332,7 @@ static int dc395x_eh_bus_reset(Scsi_Cmnd * cmd)
*/
/* Clear SCSI FIFO */
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
clear_fifo(acb, "reset");
clear_fifo(acb, "eh_bus_reset");
/* Delete pending IRQ */
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
set_basic_config(acb);
......@@ -1362,16 +1362,12 @@ static int dc395x_eh_abort(Scsi_Cmnd *cmd)
(struct AdapterCtlBlk *)cmd->device->host->hostdata;
struct DeviceCtlBlk *dcb;
struct ScsiReqBlk *srb;
dprintkl(KERN_INFO, "eh abort: cmd %p (pid %li, %02i-%i) ",
cmd,
cmd->pid,
cmd->device->id,
cmd->device->lun);
dprintkl(KERN_INFO, "eh_abort: (pid#%li) target=<%02i-%i> cmd=%p\n",
cmd->pid, cmd->device->id, cmd->device->lun, cmd);
dcb = find_dcb(acb, cmd->device->id, cmd->device->lun);
if (!dcb) {
dprintkl(KERN_DEBUG, "abort - no DCB found");
dprintkl(KERN_DEBUG, "eh_abort: No such device\n");
return FAILED;
}
......@@ -1382,16 +1378,16 @@ static int dc395x_eh_abort(Scsi_Cmnd *cmd)
pci_unmap_srb(acb, srb);
free_tag(dcb, srb);
srb_free_insert(acb, srb);
dprintkl(KERN_DEBUG, "abort - command found in waiting commands queue");
dprintkl(KERN_DEBUG, "eh_abort: Command was waiting\n");
cmd->result = DID_ABORT << 16;
return SUCCESS;
}
srb = find_cmd(cmd, &dcb->srb_going_list);
if (srb) {
dprintkl(KERN_DEBUG, "abort - command currently in progress");
dprintkl(KERN_DEBUG, "eh_abort: Command in progress");
/* XXX: Should abort the command here */
} else {
dprintkl(KERN_DEBUG, "abort - command not found");
dprintkl(KERN_DEBUG, "eh_abort: Command not found");
}
return FAILED;
}
......@@ -1404,7 +1400,7 @@ static void build_sdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
u8 *ptr = srb->msgout_buf + srb->msg_count;
if (srb->msg_count > 1) {
dprintkl(KERN_INFO,
"Build_SDTR: msgout_buf BUSY (%i: %02x %02x)\n",
"build_sdtr: msgout_buf BUSY (%i: %02x %02x)\n",
srb->msg_count, srb->msgout_buf[0],
srb->msgout_buf[1]);
return;
......@@ -1434,7 +1430,7 @@ static void build_wdtr(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
u8 *ptr = srb->msgout_buf + srb->msg_count;
if (srb->msg_count > 1) {
dprintkl(KERN_INFO,
"Build_WDTR: msgout_buf BUSY (%i: %02x %02x)\n",
"build_wdtr: msgout_buf BUSY (%i: %02x %02x)\n",
srb->msg_count, srb->msgout_buf[0],
srb->msgout_buf[1]);
return;
......@@ -1487,14 +1483,15 @@ void selection_timeout_missed(unsigned long ptr)
#endif
static u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
struct ScsiReqBlk * srb)
static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
struct ScsiReqBlk* srb)
{
u16 s_stat2, return_code;
u8 s_stat, scsicommand, i, identify_message;
u8 *ptr;
dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> srb=%p\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun, srb);
dprintkdbg(DBG_0, "start_scsi (#%li)\n", srb->cmd->pid);
srb->tag_number = TAG_NONE; /* acb->tag_max_num: had error read in eeprom */
s_stat = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);
......@@ -1502,10 +1499,8 @@ static u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
s_stat2 = DC395x_read16(acb, TRM_S1040_SCSI_STATUS);
#if 1
if (s_stat & 0x20 /* s_stat2 & 0x02000 */ ) {
dprintkdbg(DBG_KG,
"StartSCSI: pid %li(%02i-%i): BUSY %02x %04x\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun,
s_stat, s_stat2);
dprintkdbg(DBG_KG, "start_scsi: (pid#%li) BUSY %02x %04x\n",
srb->cmd->pid, s_stat, s_stat2);
/*
* Try anyway?
*
......@@ -1517,34 +1512,31 @@ static u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
* tried again after a short time
*/
/*selto_timer (acb); */
/*monitor_next_irq = 1; */
return 1;
}
#endif
if (acb->active_dcb) {
dprintkl(KERN_DEBUG, "We try to start a SCSI command (%li)!\n",
srb->cmd->pid);
dprintkl(KERN_DEBUG, "While another one (%li) is active!!\n",
(acb->active_dcb->active_srb ? acb->active_dcb->
active_srb->cmd->pid : 0));
dprintkl(KERN_DEBUG, "start_scsi: (pid#%li) Attempt to start a"
"command while another command (pid#%li) is active.",
srb->cmd->pid,
acb->active_dcb->active_srb ?
acb->active_dcb->active_srb->cmd->pid : 0);
return 1;
}
if (DC395x_read16(acb, TRM_S1040_SCSI_STATUS) & SCSIINTERRUPT) {
dprintkdbg(DBG_KG,
"StartSCSI failed (busy) for pid %li(%02i-%i)\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun);
dprintkdbg(DBG_KG, "start_scsi: (pid#%li) Failed (busy)\n",
srb->cmd->pid);
return 1;
}
/* Allow starting of SCSI commands half a second before we allow the mid-level
* to queue them again after a reset */
if (time_before(jiffies, acb->scsi_host->last_reset - HZ / 2)) {
dprintkdbg(DBG_KG,
"We were just reset and don't accept commands yet!\n");
dprintkdbg(DBG_KG, "start_scsi: Refuse cmds (reset wait)\n");
return 1;
}
/* Flush FIFO */
clear_fifo(acb, "Start");
clear_fifo(acb, "start_scsi");
DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id);
DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id);
DC395x_write8(acb, TRM_S1040_SCSI_SYNC, dcb->sync_period);
......@@ -1605,8 +1597,8 @@ static u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
tag_number++;
}
if (tag_number >= dcb->max_command) {
dprintkl(KERN_WARNING,
"Start_SCSI: Out of tags for pid %li (%i-%i)\n",
dprintkl(KERN_WARNING, "start_scsi: (pid#%li) "
"Out of tags target=<%02i-%i>)\n",
srb->cmd->pid, srb->cmd->device->id,
srb->cmd->device->lun);
srb->state = SRB_READY;
......@@ -1625,11 +1617,9 @@ static u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
#endif
/*polling:*/
/* Send CDB ..command block ......... */
dprintkdbg(DBG_KG,
"StartSCSI (pid %li) %02x (%i-%i): Tag %i\n",
srb->cmd->pid, srb->cmd->cmnd[0],
srb->cmd->device->id, srb->cmd->device->lun,
srb->tag_number);
dprintkdbg(DBG_KG, "start_scsi: (pid#%li) <%02i-%i> cmnd=0x%02x tag=%i\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun,
srb->cmd->cmnd[0], srb->tag_number);
if (srb->flag & AUTO_REQSENSE) {
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, REQUEST_SENSE);
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5));
......@@ -1652,10 +1642,8 @@ static u8 start_scsi(struct AdapterCtlBlk * acb, struct DeviceCtlBlk * dcb,
* we caught an interrupt (must be reset or reselection ... )
* : Let's process it first!
*/
dprintkdbg(DBG_0, "Debug: StartSCSI failed (busy) for pid %li(%02i-%i)!\n",
dprintkdbg(DBG_0, "start_scsi: (pid#%li) <%02i-%i> Failed - busy\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun);
/*clear_fifo(acb, "Start2"); */
/*DC395x_write16(TRM_S1040_SCSI_CONTROL, DO_HWRESELECT | DO_DATALATCH); */
srb->state = SRB_READY;
free_tag(dcb, srb);
srb->msg_count = 0;
......@@ -1703,21 +1691,13 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
/* This acknowledges the IRQ */
scsi_intstatus = DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
if ((scsi_status & 0x2007) == 0x2002)
dprintkl(KERN_DEBUG, "COP after COP completed? %04x\n",
scsi_status);
#if 1 /*def DBG_0 */
if (monitor_next_irq) {
dprintkl(KERN_INFO,
"status=%04x intstatus=%02x\n", scsi_status,
scsi_intstatus);
monitor_next_irq--;
}
#endif
dprintkl(KERN_DEBUG,
"COP after COP completed? %04x\n", scsi_status);
if (debug_enabled(DBG_KG)) {
if (scsi_intstatus & INT_SELTIMEOUT)
dprintkdbg(DBG_KG, "Sel Timeout IRQ\n");
dprintkdbg(DBG_KG, "handle_interrupt: Selection timeout\n");
}
/*dprintkl(KERN_DEBUG, "DC395x_IRQ: intstatus = %02x ", scsi_intstatus); */
/*dprintkl(KERN_DEBUG, "handle_interrupt: intstatus = 0x%02x ", scsi_intstatus); */
if (timer_pending(&acb->selto_timer))
del_timer(&acb->selto_timer);
......@@ -1807,8 +1787,6 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id,
u8 dma_status;
irqreturn_t handled = IRQ_NONE;
dprintkdbg(DBG_0, "dc395x_interrupt...\n");
/*
* Check for pending interupt
*/
......@@ -1821,7 +1799,7 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id,
}
else if (dma_status & 0x20) {
/* Error from the DMA engine */
dprintkl(KERN_INFO, "Interrupt from DMA engine: %02x!\n", dma_status);
dprintkl(KERN_INFO, "Interrupt from DMA engine: 0x%02x!\n", dma_status);
#if 0
dprintkl(KERN_INFO, "This means DMA error! Try to handle ...\n");
if (acb->active_dcb) {
......@@ -1844,7 +1822,7 @@ static irqreturn_t dc395x_interrupt(int irq, void *dev_id,
static void msgout_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "msgout_phase0 (#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "msgout_phase0: (pid#%li)\n", srb->cmd->pid);
if (srb->state & (SRB_UNEXPECT_RESEL + SRB_ABORT_SENT))
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
......@@ -1858,15 +1836,17 @@ static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
{
u16 i;
u8 *ptr;
dprintkdbg(DBG_0, "msgout_phase1: (pid#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "msgout_phase1 (#%li)\n", srb->cmd->pid);
clear_fifo(acb, "MOP1");
clear_fifo(acb, "msgout_phase1");
if (!(srb->state & SRB_MSGOUT)) {
srb->state |= SRB_MSGOUT;
dprintkl(KERN_DEBUG, "Debug: pid %li: MsgOut Phase unexpected.\n", srb->cmd->pid); /* So what ? */
dprintkl(KERN_DEBUG,
"msgout_phase1: (pid#%li) Phase unexpected\n",
srb->cmd->pid); /* So what ? */
}
if (!srb->msg_count) {
dprintkdbg(DBG_0, "Debug: pid %li: NOP Msg (no output message there).\n",
dprintkdbg(DBG_0, "msgout_phase1: (pid#%li) NOP msg\n",
srb->cmd->pid);
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, MSG_NOP);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
......@@ -1877,13 +1857,9 @@ static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
for (i = 0; i < srb->msg_count; i++)
DC395x_write8(acb, TRM_S1040_SCSI_FIFO, *ptr++);
srb->msg_count = 0;
if (/*(dcb->flag & ABORT_DEV_) && */
(srb->msgout_buf[0] == MSG_ABORT))
if (srb->msgout_buf[0] == MSG_ABORT)
srb->state = SRB_ABORT_SENT;
/*1.25 */
/*DC395x_write16 (TRM_S1040_SCSI_CONTROL, DO_DATALATCH); *//* it's important for atn stop */
/* SCSI command */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_FIFO_OUT);
}
......@@ -1891,9 +1867,7 @@ static void msgout_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
static void command_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "command_phase0 (#%li)\n", srb->cmd->pid);
/*1.25 */
/*clear_fifo(acb, COP0); */
dprintkdbg(DBG_0, "command_phase0: (pid#%li)\n", srb->cmd->pid);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
}
......@@ -1904,9 +1878,9 @@ static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
struct DeviceCtlBlk *dcb;
u8 *ptr;
u16 i;
dprintkdbg(DBG_0, "command_phase1: (pid#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "command_phase1 (#%li)\n", srb->cmd->pid);
clear_fifo(acb, "COP1");
clear_fifo(acb, "command_phase1");
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_CLRATN);
if (!(srb->flag & AUTO_REQSENSE)) {
ptr = (u8 *)srb->cmd->cmnd;
......@@ -1939,14 +1913,14 @@ static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
*/
static void sg_verify_length(struct ScsiReqBlk *srb)
{
if (debug_enabled(DBG_SGPARANOIA)) {
if (debug_enabled(DBG_SG)) {
unsigned len = 0;
unsigned idx = srb->sg_index;
struct SGentry *psge = srb->segment_x + idx;
for (; idx < srb->sg_count; psge++, idx++)
len += psge->length;
if (len != srb->total_xfer_length)
dprintkdbg(DBG_SGPARANOIA,
dprintkdbg(DBG_SG,
"Inconsistent SRB S/G lengths (Tot=%i, Count=%i) !!\n",
srb->total_xfer_length, len);
}
......@@ -1966,8 +1940,8 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
struct SGentry *psge = srb->segment_x + srb->sg_index;
dprintkdbg(DBG_0, "sg_update_list: Transfered %i of %i bytes, "
"%i remain\n",
dprintkdbg(DBG_0,
"sg_update_list: Transfered %i of %i bytes, %i remain\n",
xferred, srb->total_xfer_length, left);
if (xferred == 0) {
/* nothing to update since we did not transfer any data */
......@@ -2016,7 +1990,7 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
++sg;
}
dprintkl(KERN_ERR, "sg_to_virt failed!\n");
dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n");
srb->virt_addr = 0;
}
......@@ -2055,14 +2029,14 @@ static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
/*DC395x_write8 (TRM_S1040_DMA_STATUS, FORCEDMACOMP); */
if (DC395x_read16(acb, TRM_S1040_DMA_COMMAND) & 0x0001) { /* read */
if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
clear_fifo(acb, "ClnIn");
clear_fifo(acb, "cleanup/in");
if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
} else { /* write */
if (!(DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT) & 0x80))
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
clear_fifo(acb, "ClnOut");
clear_fifo(acb, "cleanup/out");
}
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH);
}
......@@ -2081,8 +2055,8 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
struct DeviceCtlBlk *dcb = srb->dcb;
u16 scsi_status = *pscsi_status;
u32 d_left_counter = 0;
dprintkdbg(DBG_0, "data_out_phase0 (#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "data_out_phase0: (pid#%li) <%02i-%i>\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
/*
* KG: We need to drain the buffers before we draw any conclusions!
......@@ -2096,7 +2070,9 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
* KG: Stop DMA engine pushing more data into the SCSI FIFO
* If we need more data, the DMA SG list will be freshly set up, anyway
*/
dprintkdbg(DBG_PIO, "DOP0: DMA_FCNT: %02x, DMA_FSTAT: %02x, SCSI_FCNT: %02x, CTR %06x, stat %04x, Tot: %06x\n",
dprintkdbg(DBG_PIO, "data_out_phase0: "
"DMA{fifcnt=0x%02x fifostat=0x%02x} "
"SCSI{fifocnt=0x%02x cnt=0x%06x status=0x%04x} total=0x%06x\n",
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
......@@ -2125,26 +2101,16 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
if (dcb->sync_period & WIDE_SYNC)
d_left_counter <<= 1;
dprintkdbg(DBG_KG,
"Debug: SCSI FIFO contains %i %s in DOP0\n",
dprintkdbg(DBG_KG, "data_out_phase0: FIFO contains %i %s\n"
"SCSI{fifocnt=0x%02x cnt=0x%08x} "
"DMA{fifocnt=0x%04x cnt=0x%02x ctr=0x%08x}\n",
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
(dcb->
sync_period & WIDE_SYNC) ? "words" :
"bytes");
dprintkdbg(DBG_KG,
"SCSI FIFOCNT %02x, SCSI CTR %08x\n",
(dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER));
dprintkdbg(DBG_KG,
"DMA FIFOCNT %04x, FIFOSTAT %02x, DMA CTR %08x\n",
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
/*
* if WIDE scsi SCSI FIFOCNT unit is word !!!
* so need to *= 2
*/
}
/*
* calculate all the residue data that not yet tranfered
......@@ -2165,7 +2131,8 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
if (d_left_counter == 1 && dcb->sync_period & WIDE_SYNC
&& srb->cmd->request_bufflen % 2) {
d_left_counter = 0;
dprintkl(KERN_INFO, "DOP0: Discard 1 byte. (%02x)\n",
dprintkl(KERN_INFO,
"data_out_phase0: Discard 1 byte (0x%02x)\n",
scsi_status);
}
/*
......@@ -2178,19 +2145,9 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
* KG: This is nonsense: We have been WRITING data to the bus
* If the SCSI engine has no bytes left, how should the DMA engine?
*/
if (d_left_counter == 0
/*|| (scsi_status & SCSIXFERCNT_2_ZERO)*/) {
/*
* int ctr = 6000000; u8 TempDMAstatus;
* do
* {
* TempDMAstatus = DC395x_read8(acb, TRM_S1040_DMA_STATUS);
* } while( !(TempDMAstatus & DMAXFERCOMP) && --ctr);
* if (ctr < 6000000-1) dprintkl(KERN_DEBUG, "DMA should be complete ... in DOP1\n");
* if (!ctr) dprintkl(KERN_ERR, "Deadlock in DataOutPhase0 !!\n");
*/
if (d_left_counter == 0) {
srb->total_xfer_length = 0;
} else { /* Update SG list */
} else {
/*
* if transfer not yet complete
* there were some data residue in SCSI FIFO or
......@@ -2207,7 +2164,7 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
|| ((oldxferred & ~PAGE_MASK) ==
(PAGE_SIZE - diff))
) {
dprintkl(KERN_INFO,
dprintkl(KERN_INFO, "data_out_phase0: "
"Work around chip bug (%i)?\n", diff);
d_left_counter =
srb->total_xfer_length - diff;
......@@ -2219,43 +2176,30 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
}
}
}
#if 0
if (!(DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x40))
dprintkl(KERN_DEBUG,
"DOP0(%li): %i bytes in SCSI FIFO! (Clear!)\n",
srb->cmd->pid,
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f);
#endif
/*clear_fifo(acb, "DOP0"); */
/*DC395x_write8(TRM_S1040_DMA_CONTROL, CLRXFIFO | ABORTXFER); */
#if 1
if ((*pscsi_status & PHASEMASK) != PH_DATA_OUT) {
/*dprintkl(KERN_DEBUG, "Debug: Clean up after Data Out ...\n"); */
cleanup_after_transfer(acb, srb);
}
#endif
}
static void data_out_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "data_out_phase1 (#%li)\n", srb->cmd->pid);
/*1.25 */
clear_fifo(acb, "DOP1");
/* do prepare befor transfer when data out phase */
dprintkdbg(DBG_0, "data_out_phase1: (pid#%li) <%02i-%i>\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
clear_fifo(acb, "data_out_phase1");
/* do prepare before transfer when data out phase */
data_io_transfer(acb, srb, XFERDATAOUT);
}
static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
u16 scsi_status = *pscsi_status;
u32 d_left_counter = 0;
dprintkdbg(DBG_0, "data_in_phase0 (#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "data_in_phase0: (pid#%li) <%02i-%i>\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
/*
* KG: DataIn is much more tricky than DataOut. When the device is finished
......@@ -2272,10 +2216,8 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
*/
if (!(srb->state & SRB_XFERPAD)) {
if (scsi_status & PARITYERROR) {
dprintkl(KERN_INFO,
"Parity Error (pid %li, target %02i-%i)\n",
srb->cmd->pid, srb->cmd->device->id,
srb->cmd->device->lun);
dprintkl(KERN_INFO, "data_in_phase0: (pid#%li) "
"Parity Error\n", srb->cmd->pid);
srb->status |= PARITY_ERROR;
}
/*
......@@ -2303,7 +2245,8 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
"Deadlock in DIP0 waiting for DMA FIFO empty!!\n");
/*DC395x_write32 (TRM_S1040_SCSI_COUNTER, 0); */
#endif
dprintkdbg(DBG_KG, "DIP0: DMA_FIFO: %02x %02x\n",
dprintkdbg(DBG_KG, "data_in_phase0: "
"DMA{fifocnt=0x%02x fifostat=0x%02x}\n",
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT));
}
......@@ -2312,19 +2255,16 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
+ ((DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f)
<< ((srb->dcb->sync_period & WIDE_SYNC) ? 1 :
0));
dprintkdbg(DBG_KG, "SCSI FIFO contains %i %s in DIP0\n",
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f,
(srb->dcb->
sync_period & WIDE_SYNC) ? "words" : "bytes");
dprintkdbg(DBG_KG, "SCSI FIFOCNT %02x, SCSI CTR %08x\n",
dprintkdbg(DBG_KG, "data_in_phase0: "
"SCSI{fifocnt=0x%02x%s ctr=0x%08x} "
"DMA{fifocnt=0x%02x fifostat=0x%02x ctr=0x%08x} "
"Remain{totxfer=%i scsi_fifo+ctr=%i}\n",
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT),
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER));
dprintkdbg(DBG_KG, "DMA FIFOCNT %02x,%02x DMA CTR %08x\n",
(srb->dcb->sync_period & WIDE_SYNC) ? "words" : "bytes",
DC395x_read32(acb, TRM_S1040_SCSI_COUNTER),
DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
dprintkdbg(DBG_KG, "Remaining: TotXfer: %i, SCSI FIFO+Ctr: %i\n",
DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
srb->total_xfer_length, d_left_counter);
#if DC395x_LASTPIO
/* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */
......@@ -2332,18 +2272,16 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
&& srb->total_xfer_length <= DC395x_LASTPIO) {
/*u32 addr = (srb->segment_x[srb->sg_index].address); */
/*sg_update_list (srb, d_left_counter); */
dprintkdbg(DBG_PIO, "DIP0: PIO (%i %s) to %p for remaining %i bytes:",
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) &
0x1f,
(srb->dcb->
sync_period & WIDE_SYNC) ? "words" :
"bytes", srb->virt_addr,
dprintkdbg(DBG_PIO, "data_in_phase0: PIO (%i %s) to "
"%p for remaining %i bytes:",
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) & 0x1f,
(srb->dcb->sync_period & WIDE_SYNC) ?
"words" : "bytes",
srb->virt_addr,
srb->total_xfer_length);
if (srb->dcb->sync_period & WIDE_SYNC)
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
CFG2_WIDEFIFO);
while (DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT) != 0x40) {
u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
*(srb->virt_addr)++ = byte;
......@@ -2394,17 +2332,6 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
*/
}
#endif
/*d_left_counter += DC395x_read32(acb, TRM_S1040_SCSI_COUNTER); */
#if 0
dprintkl(KERN_DEBUG,
"DIP0: ctr=%08x, DMA_FIFO=%02x,%02x SCSI_FIFO=%02x\n",
d_left_counter, DC395x_read8(acb, TRM_S1040_DMA_FIFOCNT),
DC395x_read8(acb, TRM_S1040_DMA_FIFOSTAT),
DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT));
dprintkl(KERN_DEBUG, "DIP0: DMAStat %02x\n",
DC395x_read8(acb, TRM_S1040_DMA_STATUS));
#endif
/* KG: This should not be needed any more! */
if (d_left_counter == 0
|| (scsi_status & SCSIXFERCNT_2_ZERO)) {
......@@ -2419,12 +2346,6 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
dprintkl(KERN_ERR,
"Deadlock in DataInPhase0 waiting for DMA!!\n");
srb->total_xfer_length = 0;
#endif
#if 0 /*def DBG_KG */
dprintkl(KERN_DEBUG,
"DIP0: DMA not yet ready: %02x: %i -> %i bytes\n",
DC395x_read8(acb, TRM_S1040_DMA_STATUS),
srb->total_xfer_length, d_left_counter);
#endif
srb->total_xfer_length = d_left_counter;
} else { /* phase changed */
......@@ -2441,40 +2362,16 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
}
/* KG: The target may decide to disconnect: Empty FIFO before! */
if ((*pscsi_status & PHASEMASK) != PH_DATA_IN) {
/*dprintkl(KERN_DEBUG, "Debug: Clean up after Data In ...\n"); */
cleanup_after_transfer(acb, srb);
}
#if 0
/* KG: Make sure, no previous transfers are pending! */
bval = DC395x_read8(acb, TRM_S1040_SCSI_FIFOCNT);
if (!(bval & 0x40)) {
bval &= 0x1f;
dprintkl(KERN_DEBUG,
"DIP0(%li): %i bytes in SCSI FIFO (stat %04x) (left %08x)!!\n",
srb->cmd->pid, bval & 0x1f, scsi_status,
d_left_counter);
if (d_left_counter == 0
|| (scsi_status & SCSIXFERCNT_2_ZERO)) {
dprintkl(KERN_DEBUG, "Clear FIFO!\n");
clear_fifo(acb, "DIP0");
}
}
#endif
/*DC395x_write8 (TRM_S1040_DMA_CONTROL, CLRXFIFO | ABORTXFER); */
/*clear_fifo(acb, "DIP0"); */
/*DC395x_write16(TRM_S1040_SCSI_CONTROL, DO_DATALATCH); */
}
static void data_in_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "data_in_phase1 (#%li)\n", srb->cmd->pid);
/* FIFO should be cleared, if previous phase was not DataPhase */
/*clear_fifo(acb, "DIP1"); */
/* Allow data in! */
/*DC395x_write16(TRM_S1040_SCSI_CONTROL, DO_DATALATCH); */
/* do prepare before transfer when data in phase */
dprintkdbg(DBG_0, "data_in_phase1: (pid#%li) <%02i-%i>\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
data_io_transfer(acb, srb, XFERDATAIN);
}
......@@ -2484,14 +2381,13 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
{
struct DeviceCtlBlk *dcb = srb->dcb;
u8 bval;
dprintkdbg(DBG_0, "data_io_transfer %c (#%li): len=%i, sg=(%i/%i)\n",
((io_dir & DMACMD_DIR) ? 'r' : 'w'), srb->cmd->pid,
srb->total_xfer_length, srb->sg_index,
srb->sg_count);
dprintkdbg(DBG_0,
"data_io_transfer: (pid#%li) <%02i-%i> %c len=%i, sg=(%i/%i)\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun,
((io_dir & DMACMD_DIR) ? 'r' : 'w'),
srb->total_xfer_length, srb->sg_index, srb->sg_count);
if (srb == acb->tmp_srb)
dprintkl(KERN_ERR, "Using tmp_srb in DataPhase!\n");
dprintkl(KERN_ERR, "data_io_transfer: Using tmp_srb!\n");
if (srb->sg_index >= srb->sg_count) {
/* can't happen? out of bounds error */
return;
......@@ -2504,7 +2400,8 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
* Maybe, even ABORTXFER would be appropriate
*/
if (dma_status & XFERPENDING) {
dprintkl(KERN_DEBUG, "Xfer pending! Expect trouble!!\n");
dprintkl(KERN_DEBUG, "data_io_transfer: Xfer pending! "
"Expect trouble!\n");
dump_register_info(acb, dcb, srb);
DC395x_write8(acb, TRM_S1040_DMA_CONTROL, CLRXFIFO);
}
......@@ -2566,10 +2463,9 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
if (srb->dcb->sync_period & WIDE_SYNC)
DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
CFG2_WIDEFIFO);
dprintkdbg(DBG_PIO, "DOP1: PIO %i bytes from %p:",
srb->total_xfer_length,
srb->virt_addr);
dprintkdbg(DBG_PIO,
"data_io_transfer: PIO %i bytes from %p:",
srb->total_xfer_length, srb->virt_addr);
while (srb->total_xfer_length) {
if (debug_enabled(DBG_PIO))
......@@ -2643,15 +2539,13 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "status_phase0 (#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "status_phase0: (pid#%li) <%02i-%i>\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
srb->target_status = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
srb->end_message = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); /* get message */
srb->state = SRB_COMPLETED;
*pscsi_status = PH_BUS_FREE; /*.. initial phase */
/*1.25 */
/*clear_fifo(acb, "STP0"); */
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
/* SCSI command */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_MSGACCEPT);
}
......@@ -2659,27 +2553,14 @@ static void status_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
static void status_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "status_phase1 (#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "status_phase1: (pid#%li) <%02i-%i>\n",
srb->cmd->pid, srb->cmd->device->id, srb->cmd->device->lun);
srb->state = SRB_STATUS;
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
/* SCSI command */
DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, SCMD_COMP);
}
#if 0
/* Print received message */
static void print_msg(u8 * msg_buf, u32 len)
{
int i;
printk(" %02x", msg_buf[0]);
for (i = 1; i < len; i++)
printk(" %02x", msg_buf[i]);
printk("\n");
}
#endif
/* Check if the message is complete */
static inline u8 msgin_completed(u8 * msgbuf, u32 len)
{
......@@ -2708,8 +2589,8 @@ static inline void msgin_reject(struct AdapterCtlBlk *acb,
DC395x_ENABLE_MSGOUT;
srb->state &= ~SRB_MSGIN;
srb->state |= SRB_MSGOUT;
dprintkl(KERN_INFO,
"Reject message %02x from %02i-%i\n", srb->msgin_buf[0],
dprintkl(KERN_INFO, "msgin_reject: 0x%02x <%02i-%i>\n",
srb->msgin_buf[0],
srb->dcb->target_id, srb->dcb->target_lun);
}
......@@ -2723,10 +2604,6 @@ static inline void enable_msgout_abort(struct AdapterCtlBlk *acb,
DC395x_ENABLE_MSGOUT;
srb->state &= ~SRB_MSGIN;
srb->state |= SRB_MSGOUT;
/*
if (srb->dcb)
srb->dcb->flag &= ~ABORT_DEV_;
*/
}
......@@ -2735,12 +2612,12 @@ static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
{
struct ScsiReqBlk *srb = NULL;
struct ScsiReqBlk *i;
dprintkdbg(DBG_0, "msgin_qtag (#%li) tag=%i (srb=%p)\n",
dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) tag=%i srb=%p\n",
srb->cmd->pid, tag, srb);
if (!(dcb->tag_mask & (1 << tag)))
dprintkl(KERN_DEBUG,
"MsgIn_QTag: tag_mask (%08x) does not reserve tag %i!\n",
"msgin_qtag: tag_mask=0x%08x does not reserve tag %i!\n",
dcb->tag_mask, tag);
if (list_empty(&dcb->srb_going_list))
......@@ -2754,8 +2631,8 @@ static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
if (!srb)
goto mingx0;
dprintkdbg(DBG_0, "pid %li (%i-%i)\n", srb->cmd->pid,
srb->dcb->target_id, srb->dcb->target_lun);
dprintkdbg(DBG_0, "msgin_qtag: (pid#%li) <%02i-%i>\n",
srb->cmd->pid, srb->dcb->target_id, srb->dcb->target_lun);
if (dcb->flag & ABORT_DEV_) {
/*srb->state = SRB_ABORT_SENT; */
enable_msgout_abort(acb, srb);
......@@ -2778,7 +2655,7 @@ static struct ScsiReqBlk *msgin_qtag(struct AdapterCtlBlk *acb,
srb->msgout_buf[0] = MSG_ABORT_TAG;
srb->msg_count = 1;
DC395x_ENABLE_MSGOUT;
dprintkl(KERN_DEBUG, "Unknown tag received: %i: abort !!\n", tag);
dprintkl(KERN_DEBUG, "msgin_qtag: Unknown tag %i - abort\n", tag);
return srb;
}
......@@ -2797,8 +2674,9 @@ static inline void reprogram_regs(struct AdapterCtlBlk *acb,
static void msgin_set_async(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
{
struct DeviceCtlBlk *dcb = srb->dcb;
dprintkl(KERN_DEBUG, "msgin_set_async: No sync transfers <%02i-%i>\n",
dcb->target_id, dcb->target_lun);
dprintkl(KERN_DEBUG, "Target %02i: No sync transfers\n", dcb->target_id);
dcb->sync_mode &= ~(SYNC_NEGO_ENABLE);
dcb->sync_mode |= SYNC_NEGO_DONE;
/*dcb->sync_period &= 0; */
......@@ -2810,7 +2688,7 @@ static void msgin_set_async(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
&& !(dcb->sync_mode & WIDE_NEGO_DONE)) {
build_wdtr(acb, dcb, srb);
DC395x_ENABLE_MSGOUT;
dprintkdbg(DBG_0, "SDTR(rej): Try WDTR anyway ...\n");
dprintkdbg(DBG_0, "msgin_set_async(rej): Try WDTR anyway\n");
}
}
......@@ -2821,8 +2699,8 @@ static void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
struct DeviceCtlBlk *dcb = srb->dcb;
u8 bval;
int fact;
dprintkdbg(DBG_1, "Target %02i: Sync: %ins (%02i.%01i MHz) Offset %i\n",
dprintkdbg(DBG_1, "msgin_set_sync: <%02i> Sync: %ins "
"(%02i.%01i MHz) Offset %i\n",
dcb->target_id, srb->msgin_buf[3] << 2,
(250 / srb->msgin_buf[3]),
((250 % srb->msgin_buf[3]) * 10) / srb->msgin_buf[3],
......@@ -2845,7 +2723,7 @@ static void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
bval++;
if (srb->msgin_buf[3] < clock_period[bval])
dprintkl(KERN_INFO,
"Increase sync nego period to %ins\n",
"msgin_set_sync: Increase sync nego period to %ins\n",
clock_period[bval] << 2);
srb->msgin_buf[3] = clock_period[bval];
dcb->sync_period &= 0xf0;
......@@ -2867,7 +2745,7 @@ static void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
if (!(srb->state & SRB_DO_SYNC_NEGO)) {
/* Reply with corrected SDTR Message */
dprintkl(KERN_DEBUG, " .. answer w/ %ins %i\n",
dprintkl(KERN_DEBUG, "msgin_set_sync: answer w/%ins %i\n",
srb->msgin_buf[3] << 2, srb->msgin_buf[4]);
memcpy(srb->msgout_buf, srb->msgin_buf, 5);
......@@ -2879,7 +2757,7 @@ static void msgin_set_sync(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
&& !(dcb->sync_mode & WIDE_NEGO_DONE)) {
build_wdtr(acb, dcb, srb);
DC395x_ENABLE_MSGOUT;
dprintkdbg(DBG_0, "SDTR: Also try WDTR ...\n");
dprintkdbg(DBG_0, "msgin_set_sync: Also try WDTR\n");
}
}
srb->state &= ~SRB_DO_SYNC_NEGO;
......@@ -2893,9 +2771,8 @@ static inline void msgin_set_nowide(struct AdapterCtlBlk *acb,
struct ScsiReqBlk *srb)
{
struct DeviceCtlBlk *dcb = srb->dcb;
dprintkdbg(DBG_1, "msgin_set_nowide: <%02i>\n", dcb->target_id);
dprintkdbg(DBG_KG, "WDTR got rejected from target %02i\n",
dcb->target_id);
dcb->sync_period &= ~WIDE_SYNC;
dcb->sync_mode &= ~(WIDE_NEGO_ENABLE);
dcb->sync_mode |= WIDE_NEGO_DONE;
......@@ -2905,7 +2782,7 @@ static inline void msgin_set_nowide(struct AdapterCtlBlk *acb,
&& !(dcb->sync_mode & SYNC_NEGO_DONE)) {
build_sdtr(acb, dcb, srb);
DC395x_ENABLE_MSGOUT;
dprintkdbg(DBG_0, "WDTR(rej): Try SDTR anyway ...\n");
dprintkdbg(DBG_0, "msgin_set_nowide: Rejected. Try SDTR anyway\n");
}
}
......@@ -2914,13 +2791,14 @@ static void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
struct DeviceCtlBlk *dcb = srb->dcb;
u8 wide = (dcb->dev_mode & NTC_DO_WIDE_NEGO
&& acb->config & HCC_WIDE_CARD) ? 1 : 0;
dprintkdbg(DBG_1, "msgin_set_wide: <%02i>\n", dcb->target_id);
if (srb->msgin_buf[3] > wide)
srb->msgin_buf[3] = wide;
/* Completed */
if (!(srb->state & SRB_DO_WIDE_NEGO)) {
dprintkl(KERN_DEBUG,
"Target %02i initiates Wide Nego ...\n",
"msgin_set_wide: Wide nego initiated <%02i>\n",
dcb->target_id);
memcpy(srb->msgout_buf, srb->msgin_buf, 4);
srb->msg_count = 4;
......@@ -2935,15 +2813,15 @@ static void msgin_set_wide(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
dcb->sync_period &= ~WIDE_SYNC;
srb->state &= ~SRB_DO_WIDE_NEGO;
/*dcb->sync_mode &= ~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE); */
dprintkdbg(DBG_KG,
"Wide transfers (%i bit) negotiated with target %02i\n",
dprintkdbg(DBG_1,
"msgin_set_wide: Wide (%i bit) negotiated <%02i>\n",
(8 << srb->msgin_buf[3]), dcb->target_id);
reprogram_regs(acb, dcb);
if ((dcb->sync_mode & SYNC_NEGO_ENABLE)
&& !(dcb->sync_mode & SYNC_NEGO_DONE)) {
build_sdtr(acb, dcb, srb);
DC395x_ENABLE_MSGOUT;
dprintkdbg(DBG_0, "WDTR: Also try SDTR ...\n");
dprintkdbg(DBG_0, "msgin_set_wide: Also try SDTR.\n");
}
}
......@@ -2964,8 +2842,7 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
struct DeviceCtlBlk *dcb = acb->active_dcb;
dprintkdbg(DBG_0, "msgin_phase0 (#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "msgin_phase0: (pid#%li)\n", srb->cmd->pid);
srb->msgin_buf[acb->msg_len++] = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
if (msgin_completed(srb->msgin_buf, acb->msg_len)) {
......@@ -3017,43 +2894,42 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
msgin_reject(acb, srb);
break;
/* Discard wide residual */
case MSG_IGNOREWIDE:
dprintkdbg(DBG_0, "Ignore Wide Residual!\n");
/*DC395x_write32 (TRM_S1040_SCSI_COUNTER, 1); */
/*DC395x_read8 (TRM_S1040_SCSI_FIFO); */
/* Discard wide residual */
dprintkdbg(DBG_0, "msgin_phase0: Ignore Wide Residual!\n");
break;
/* nothing has to be done */
case COMMAND_COMPLETE:
/* nothing has to be done */
break;
case SAVE_POINTERS:
/*
* SAVE POINTER may be ignored as we have the struct
* ScsiReqBlk* associated with the scsi command.
*/
case SAVE_POINTERS:
dprintkdbg(DBG_0, "SAVE POINTER message received (pid %li: rem.%i) ... ignore :-(\n",
dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
"SAVE POINTER rem=%i Ignore\n",
srb->cmd->pid, srb->total_xfer_length);
/*srb->Saved_Ptr = srb->TotalxferredLen; */
break;
/* The device might want to restart transfer with a RESTORE */
case RESTORE_POINTERS:
dprintkl(KERN_DEBUG,
"RESTORE POINTER message received ... ignore :-(\n");
/*dc395x_restore_ptr (acb, srb); */
dprintkdbg(DBG_0, "msgin_phase0: RESTORE POINTER. Ignore\n");
break;
case ABORT:
dprintkl(KERN_DEBUG,
"ABORT msg received (pid %li %02i-%i)\n",
dprintkdbg(DBG_0, "msgin_phase0: (pid#%li) "
"<%02i-%i> ABORT msg\n",
srb->cmd->pid, dcb->target_id,
dcb->target_lun);
dcb->flag |= ABORT_DEV_;
enable_msgout_abort(acb, srb);
break;
/* reject unknown messages */
default:
/* reject unknown messages */
if (srb->msgin_buf[0] & IDENTIFY_BASE) {
dprintkl(KERN_DEBUG, "Identify Message received?\n");
dprintkdbg(DBG_0, "msgin_phase0: Identify msg\n");
srb->msg_count = 1;
srb->msgout_buf[0] = dcb->identify_msg;
DC395x_ENABLE_MSGOUT;
......@@ -3076,8 +2952,8 @@ static void msgin_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
static void msgin_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
u16 *pscsi_status)
{
dprintkdbg(DBG_0, "msgin_phase1 (#%li)\n", srb->cmd->pid);
clear_fifo(acb, "MIP1");
dprintkdbg(DBG_0, "msgin_phase1: (pid#%li)\n", srb->cmd->pid);
clear_fifo(acb, "msgin_phase1");
DC395x_write32(acb, TRM_S1040_SCSI_COUNTER, 1);
if (!(srb->state & SRB_MSGIN)) {
srb->state &= ~SRB_DISCONNECT;
......@@ -3130,32 +3006,33 @@ static void disconnect(struct AdapterCtlBlk *acb)
struct ScsiReqBlk *srb;
if (!dcb) {
dprintkl(KERN_ERR, "Disc: Exception Disconnect dcb=NULL !!\n ");
dprintkl(KERN_ERR, "disconnect: No such device\n");
udelay(500);
/* Suspend queue for a while */
acb->scsi_host->last_reset =
jiffies + HZ / 2 +
HZ * acb->eeprom.delay_time;
clear_fifo(acb, "DiscEx");
clear_fifo(acb, "disconnectEx");
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT);
return;
}
srb = dcb->active_srb;
acb->active_dcb = NULL;
dprintkdbg(DBG_0, "disconnect (#%li)\n", srb->cmd->pid);
dprintkdbg(DBG_0, "disconnect: (pid#%li)\n", srb->cmd->pid);
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
clear_fifo(acb, "Disc");
clear_fifo(acb, "disconnect");
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT);
if (srb->state & SRB_UNEXPECT_RESEL) {
dprintkl(KERN_ERR, "Disc: Unexpected Reselection (%i-%i)\n",
dprintkl(KERN_ERR,
"disconnect: Unexpected reselection <%02i-%i>\n",
dcb->target_id, dcb->target_lun);
srb->state = 0;
waiting_process_next(acb);
} else if (srb->state & SRB_ABORT_SENT) {
dcb->flag &= ~ABORT_DEV_;
acb->scsi_host->last_reset = jiffies + HZ / 2 + 1;
dprintkl(KERN_ERR, "Disc: SRB_ABORT_SENT!\n");
dprintkl(KERN_ERR, "disconnect: SRB_ABORT_SENT\n");
doing_srb_done(acb, DID_ABORT, srb->cmd, 1);
waiting_process_next(acb);
} else {
......@@ -3170,16 +3047,16 @@ static void disconnect(struct AdapterCtlBlk *acb)
if (srb->state != SRB_START_
&& srb->state != SRB_MSGOUT) {
srb->state = SRB_READY;
dprintkl(KERN_DEBUG, "Unexpected Disconnection (pid %li)!\n",
dprintkl(KERN_DEBUG,
"disconnect: (pid#%li) Unexpected\n",
srb->cmd->pid);
srb->target_status = SCSI_STAT_SEL_TIMEOUT;
goto disc1;
} else {
/* Normal selection timeout */
dprintkdbg(DBG_KG,
"Disc: SelTO (#%li) for dev %02i-%i\n",
srb->cmd->pid, dcb->target_id,
dcb->target_lun);
dprintkdbg(DBG_KG, "disconnect: (pid#%li) "
"<%02i-%i> SelTO\n", srb->cmd->pid,
dcb->target_id, dcb->target_lun);
if (srb->retry_count++ > DC395x_MAX_RETRIES
|| acb->scan_devices) {
srb->target_status =
......@@ -3188,7 +3065,8 @@ static void disconnect(struct AdapterCtlBlk *acb)
}
free_tag(dcb, srb);
srb_going_to_waiting_move(dcb, srb);
dprintkdbg(DBG_KG, "Retry pid %li ...\n",
dprintkdbg(DBG_KG,
"disconnect: (pid#%li) Retry\n",
srb->cmd->pid);
waiting_set_timer(acb, HZ / 20);
}
......@@ -3197,9 +3075,9 @@ static void disconnect(struct AdapterCtlBlk *acb)
/*
* SRB_DISCONNECT (This is what we expect!)
*/
/* dprintkl(KERN_DEBUG, "DoWaitingSRB (#%li)\n", srb->cmd->pid); */
if (bval & 0x40) {
dprintkdbg(DBG_0, "Debug: DISC: SCSI bus stat %02x: ACK set! Other controllers?\n",
dprintkdbg(DBG_0, "disconnect: SCSI bus stat "
" 0x%02x: ACK set! Other controllers?\n",
bval);
/* It could come from another initiator, therefore don't do much ! */
} else
......@@ -3212,7 +3090,6 @@ static void disconnect(struct AdapterCtlBlk *acb)
free_tag(dcb, srb);
dcb->active_srb = NULL;
srb->state = SRB_FREE;
/*dprintkl(KERN_DEBUG, "done (#%li)\n", srb->cmd->pid); */
srb_done(acb, dcb, srb);
}
}
......@@ -3226,24 +3103,24 @@ static void reselect(struct AdapterCtlBlk *acb)
u16 rsel_tar_lun_id;
u8 id, lun;
u8 arblostflag = 0;
dprintkdbg(DBG_0, "reselect: acb=%p\n", acb);
dprintkdbg(DBG_0, "reselect...\n");
clear_fifo(acb, "Resel");
clear_fifo(acb, "reselect");
/*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT | DO_DATALATCH); */
/* Read Reselected Target ID and LUN */
rsel_tar_lun_id = DC395x_read16(acb, TRM_S1040_SCSI_TARGETID);
if (dcb) { /* Arbitration lost but Reselection win */
srb = dcb->active_srb;
if (!srb) {
dprintkl(KERN_DEBUG, "Arb lost Resel won, but active_srb == NULL!\n");
dprintkl(KERN_DEBUG, "reselect: Arb lost Resel won, "
"but active_srb == NULL\n");
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
return;
}
/* Why the if ? */
if (!acb->scan_devices) {
dprintkdbg(DBG_KG,
"Arb lost but Resel win pid %li (%02i-%i) Rsel %04x Stat %04x\n",
dprintkdbg(DBG_KG, "reselect: (pid#%li) <%02i-%i> "
"Arb lost but Resel win rsel=%i stat=0x%04x\n",
srb->cmd->pid, dcb->target_id,
dcb->target_lun, rsel_tar_lun_id,
DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
......@@ -3260,22 +3137,22 @@ static void reselect(struct AdapterCtlBlk *acb)
}
/* Read Reselected Target Id and LUN */
if (!(rsel_tar_lun_id & (IDENTIFY_BASE << 8)))
dprintkl(KERN_DEBUG, "Resel expects identify msg! Got %04x!\n",
rsel_tar_lun_id);
dprintkl(KERN_DEBUG, "reselect: Expects identify msg. "
"Got %i!\n", rsel_tar_lun_id);
id = rsel_tar_lun_id & 0xff;
lun = (rsel_tar_lun_id >> 8) & 7;
dcb = find_dcb(acb, id, lun);
if (!dcb) {
dprintkl(KERN_ERR, "Reselect from non existing device (%02i-%i)\n",
id, lun);
dprintkl(KERN_ERR, "reselect: From non existent device "
"<%02i-%i>\n", id, lun);
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_DATALATCH); /* it's important for atn stop */
return;
}
acb->active_dcb = dcb;
if (!(dcb->dev_mode & NTC_DO_DISCONNECT))
dprintkl(KERN_DEBUG, "Reselection in spite of forbidden disconnection? (%02i-%i)\n",
dprintkl(KERN_DEBUG, "reselect: in spite of forbidden "
"disconnection? <%02i-%i>\n",
dcb->target_id, dcb->target_lun);
if (dcb->sync_mode & EN_TAG_QUEUEING /*&& !arblostflag */) {
......@@ -3289,7 +3166,7 @@ static void reselect(struct AdapterCtlBlk *acb)
* abort command
*/
dprintkl(KERN_DEBUG,
"Reselected w/o disconnected cmds from %02i-%i?\n",
"reselect: w/o disconnected cmds <%02i-%i>\n",
dcb->target_id, dcb->target_lun);
srb = acb->tmp_srb;
srb->state = SRB_UNEXPECT_RESEL;
......@@ -3307,6 +3184,7 @@ static void reselect(struct AdapterCtlBlk *acb)
srb->scsi_phase = PH_BUS_FREE; /* initial phase */
/* Program HA ID, target ID, period and offset */
dprintkdbg(DBG_0, "reselect: select <%i>\n", dcb->target_id);
DC395x_write8(acb, TRM_S1040_SCSI_HOSTID, acb->scsi_host->this_id); /* host ID */
DC395x_write8(acb, TRM_S1040_SCSI_TARGETID, dcb->target_id); /* target ID */
DC395x_write8(acb, TRM_S1040_SCSI_OFFSET, dcb->sync_offset); /* offset */
......@@ -3371,21 +3249,19 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
int dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
if (cmd->use_sg && dir != PCI_DMA_NONE) {
/* unmap DC395x SG list */
dprintkdbg(DBG_SGPARANOIA,
"unmap SG list %08x(%05x)\n",
srb->sg_bus_addr,
SEGMENTX_LEN);
dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
srb->sg_bus_addr, SEGMENTX_LEN);
pci_unmap_single(acb->dev, srb->sg_bus_addr,
SEGMENTX_LEN,
PCI_DMA_TODEVICE);
dprintkdbg(DBG_SGPARANOIA, "Unmap %i SG segments from %p\n",
dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n",
cmd->use_sg, cmd->request_buffer);
/* unmap the sg segments */
pci_unmap_sg(acb->dev,
(struct scatterlist *)cmd->request_buffer,
cmd->use_sg, dir);
} else if (cmd->request_buffer && dir != PCI_DMA_NONE) {
dprintkdbg(DBG_SGPARANOIA, "Unmap buffer %08x(%05x)\n",
dprintkdbg(DBG_SG, "pci_unmap_srb: buffer=%08x(%05x)\n",
srb->segment_x[0].address, cmd->request_bufflen);
pci_unmap_single(acb->dev, srb->segment_x[0].address,
cmd->request_bufflen, dir);
......@@ -3400,12 +3276,11 @@ static void pci_unmap_srb_sense(struct AdapterCtlBlk *acb,
if (!(srb->flag & AUTO_REQSENSE))
return;
/* Unmap sense buffer */
dprintkdbg(DBG_SGPARANOIA, "Unmap sense buffer from %08x\n",
dprintkdbg(DBG_SG, "pci_unmap_srb_sense: buffer=%08x\n",
srb->segment_x[0].address);
pci_unmap_single(acb->dev, srb->segment_x[0].address,
srb->segment_x[0].length, PCI_DMA_FROMDEVICE);
/* Restore SG stuff */
/*printk ("Auto_ReqSense finished: Restore Counters ...\n"); */
srb->total_xfer_length = srb->xferred;
srb->segment_x[0].address =
srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address;
......@@ -3434,16 +3309,14 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
ptr = (struct ScsiInqData *)(cmd->request_buffer);
}
dprintkdbg(DBG_SGPARANOIA,
"srb_done sg=%i(%i/%i), buf=%p, addr=%p\n",
cmd->use_sg, srb->sg_index, srb->sg_count,
cmd->request_buffer, ptr);
dprintkdbg(DBG_KG,
"srb_done (#%li) (target %02i-%i): ", srb->cmd->pid,
dprintkdbg(DBG_1, "srb_done: (pid#%li) <%02i-%i>\n", srb->cmd->pid,
srb->cmd->device->id, srb->cmd->device->lun);
dprintkdbg(DBG_SG, "srb_done: srb=%p sg=%i(%i/%i) buf=%p addr=%p\n",
srb, cmd->use_sg, srb->sg_index, srb->sg_count,
cmd->request_buffer, ptr);
status = srb->target_status;
if (srb->flag & AUTO_REQSENSE) {
dprintkdbg(DBG_0, "AUTO_REQSENSE1..............\n");
dprintkdbg(DBG_0, "srb_done: AUTO_REQSENSE1\n");
pci_unmap_srb_sense(acb, srb);
/*
** target status..........................
......@@ -3451,49 +3324,48 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
srb->flag &= ~AUTO_REQSENSE;
srb->adapter_status = 0;
srb->target_status = CHECK_CONDITION << 1;
if (debug_enabled(DBG_KG)) {
if (debug_enabled(DBG_1)) {
switch (cmd->sense_buffer[2] & 0x0f) {
case NOT_READY:
dprintkl(KERN_DEBUG,
"ReqSense: NOT_READY (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i) ",
"ReqSense: NOT_READY cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
cmd->cmnd[0], dcb->target_id,
dcb->target_lun, status, acb->scan_devices);
break;
case UNIT_ATTENTION:
dprintkl(KERN_DEBUG,
"ReqSense: UNIT_ATTENTION (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i) ",
"ReqSense: UNIT_ATTENTION cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
cmd->cmnd[0], dcb->target_id,
dcb->target_lun, status, acb->scan_devices);
break;
case ILLEGAL_REQUEST:
dprintkl(KERN_DEBUG,
"ReqSense: ILLEGAL_REQUEST (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i) ",
"ReqSense: ILLEGAL_REQUEST cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
cmd->cmnd[0], dcb->target_id,
dcb->target_lun, status, acb->scan_devices);
break;
case MEDIUM_ERROR:
dprintkl(KERN_DEBUG,
"ReqSense: MEDIUM_ERROR (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i) ",
"ReqSense: MEDIUM_ERROR cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
cmd->cmnd[0], dcb->target_id,
dcb->target_lun, status, acb->scan_devices);
break;
case HARDWARE_ERROR:
dprintkl(KERN_DEBUG,
"ReqSense: HARDWARE_ERROR (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i) ",
"ReqSense: HARDWARE_ERROR cmnd=0x%02x <%02i-%i> stat=%i scan=%i ",
cmd->cmnd[0], dcb->target_id,
dcb->target_lun, status, acb->scan_devices);
break;
}
if (cmd->sense_buffer[7] >= 6)
dprintkl(KERN_DEBUG,
"Sense=%02x, ASC=%02x, ASCQ=%02x (%08x %08x) ",
printk("sense=0x%02x ASC=0x%02x ASCQ=0x%02x "
"(0x%08x 0x%08x)\n",
cmd->sense_buffer[2], cmd->sense_buffer[12],
cmd->sense_buffer[13],
*((unsigned int *)(cmd->sense_buffer + 3)),
*((unsigned int *)(cmd->sense_buffer + 8)));
else
dprintkl(KERN_DEBUG,
"Sense=%02x, No ASC/ASCQ (%08x) ",
printk("sense=0x%02x No ASC/ASCQ (0x%08x)\n",
cmd->sense_buffer[2],
*((unsigned int *)(cmd->sense_buffer + 3)));
}
......@@ -3502,7 +3374,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
cmd->result = DID_BAD_TARGET << 16;
goto ckc_e;
}
dprintkdbg(DBG_0, "AUTO_REQSENSE2..............\n");
dprintkdbg(DBG_0, "srb_done: AUTO_REQSENSE2\n");
if (srb->total_xfer_length
&& srb->total_xfer_length >= cmd->underflow)
......@@ -3528,8 +3400,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
return;
} else if (status_byte(status) == QUEUE_FULL) {
tempcnt = (u8)list_size(&dcb->srb_going_list);
printk
("\nDC395x: QUEUE_FULL for dev %02i-%i with %i cmnds\n",
dprintkl(KERN_INFO, "QUEUE_FULL for dev <%02i-%i> with %i cmnds\n",
dcb->target_id, dcb->target_lun, tempcnt);
if (tempcnt > 1)
tempcnt--;
......@@ -3611,27 +3482,24 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
cmd->SCp.buffers_residual = 0;
if (debug_enabled(DBG_KG)) {
if (srb->total_xfer_length)
dprintkdbg(DBG_KG, "pid %li: %02x (%02i-%i): Missed %i bytes\n",
cmd->pid, cmd->cmnd[0], cmd->device->id,
cmd->device->lun, srb->total_xfer_length);
dprintkdbg(DBG_KG, "srb_done: (pid#%li) <%02i-%i> "
"cmnd=0x%02x Missed %i bytes\n",
cmd->pid, cmd->device->id, cmd->device->lun,
cmd->cmnd[0], srb->total_xfer_length);
}
srb_going_remove(dcb, srb);
/* Add to free list */
if (srb == acb->tmp_srb)
dprintkl(KERN_ERR, "ERROR! Completed Cmnd with tmp_srb!\n");
else
dprintkl(KERN_ERR, "srb_done: ERROR! Completed cmd with tmp_srb\n");
else {
dprintkdbg(DBG_0, "srb_done: (pid#%li) done result=0x%08x\n",
cmd->pid, cmd->result);
srb_free_insert(acb, srb);
dprintkdbg(DBG_0, "srb_done: done (#%li)\n", cmd->pid);
if (debug_enabled(DBG_KG)) {
printk(" 0x%08x\n", cmd->result);
}
pci_unmap_srb(acb, srb);
/*DC395x_UNLOCK_ACB_NI; */
cmd->scsi_done(cmd);
/*DC395x_LOCK_ACB_NI; */
cmd->scsi_done(cmd);
waiting_process_next(acb);
}
......@@ -3641,8 +3509,8 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
Scsi_Cmnd *cmd, u8 force)
{
struct DeviceCtlBlk *dcb;
dprintkl(KERN_INFO, "doing_srb_done: pids ");
list_for_each_entry(dcb, &acb->dcb_list, list) {
struct ScsiReqBlk *srb;
struct ScsiReqBlk *tmp;
......@@ -3671,11 +3539,11 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
}
if (!list_empty(&dcb->srb_going_list))
dprintkl(KERN_DEBUG,
"How could the ML send cmnds to the Going queue? (%02i-%i)!!\n",
"How could the ML send cmnds to the Going queue? <%02i-%i>\n",
dcb->target_id, dcb->target_lun);
if (dcb->tag_mask)
dprintkl(KERN_DEBUG,
"tag_mask for %02i-%i should be empty, is %08x!\n",
"tag_mask for <%02i-%i> should be empty, is %08x!\n",
dcb->target_id, dcb->target_lun,
dcb->tag_mask);
......@@ -3685,7 +3553,7 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
p = srb->cmd;
result = MK_RES(0, did_flag, 0, 0);
printk("W:%li(%i-%i)", p->pid, p->device->id,
printk("W:%li<%02i-%i>", p->pid, p->device->id,
p->device->lun);
srb_waiting_remove(dcb, srb);
srb_free_insert(acb, srb);
......@@ -3699,11 +3567,9 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
}
}
if (!list_empty(&dcb->srb_waiting_list))
printk
("\nDC395x: Debug: ML queued %i cmnds again to %02i-%i\n",
dprintkl(KERN_DEBUG, "ML queued %i cmnds again to <%02i-%i>\n",
list_size(&dcb->srb_waiting_list), dcb->target_id,
dcb->target_lun);
dcb->flag &= ~ABORT_DEV_;
}
printk("\n");
......@@ -3712,7 +3578,7 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
static void reset_scsi_bus(struct AdapterCtlBlk *acb)
{
dprintkdbg(DBG_0, "reset_scsi_bus...\n");
dprintkdbg(DBG_0, "reset_scsi_bus: acb=%p\n", acb);
acb->acb_flag |= RESET_DEV; /* RESET_DETECT, RESET_DONE, RESET_DEV */
DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_RSTSCSI);
......@@ -3746,7 +3612,6 @@ static void set_basic_config(struct AdapterCtlBlk *acb)
wval = DC395x_read16(acb, TRM_S1040_DMA_CONFIG) & ~DMA_FIFO_CTRL;
wval |=
DMA_FIFO_HALF_HALF | DMA_ENHANCE /*| DMA_MEM_MULTI_READ */ ;
/*dprintkl(KERN_INFO, "DMA_Config: %04x\n", wval); */
DC395x_write16(acb, TRM_S1040_DMA_CONFIG, wval);
/* Clear pending interrupt status */
DC395x_read8(acb, TRM_S1040_SCSI_INTSTATUS);
......@@ -3760,7 +3625,7 @@ static void set_basic_config(struct AdapterCtlBlk *acb)
static void scsi_reset_detect(struct AdapterCtlBlk *acb)
{
dprintkl(KERN_INFO, "scsi_reset_detect\n");
dprintkl(KERN_INFO, "scsi_reset_detect: acb=%p\n", acb);
/* delay half a second */
if (timer_pending(&acb->waiting_timer))
del_timer(&acb->waiting_timer);
......@@ -3774,7 +3639,7 @@ static void scsi_reset_detect(struct AdapterCtlBlk *acb)
jiffies + 5 * HZ / 2 +
HZ * acb->eeprom.delay_time;
clear_fifo(acb, "RstDet");
clear_fifo(acb, "scsi_reset_detect");
set_basic_config(acb);
/*1.25 */
/*DC395x_write16(acb, TRM_S1040_SCSI_CONTROL, DO_HWRESELECT); */
......@@ -3797,10 +3662,9 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
struct ScsiReqBlk *srb)
{
Scsi_Cmnd *cmd = srb->cmd;
dprintkdbg(DBG_KG,
"request_sense for pid %li, target %02i-%i\n",
dprintkdbg(DBG_1, "request_sense: (pid#%li) <%02i-%i>\n",
cmd->pid, cmd->device->id, cmd->device->lun);
srb->flag |= AUTO_REQSENSE;
srb->adapter_status = 0;
srb->target_status = 0;
......@@ -3821,7 +3685,7 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
srb->segment_x[0].address =
pci_map_single(acb->dev, cmd->sense_buffer,
sizeof(cmd->sense_buffer), PCI_DMA_FROMDEVICE);
dprintkdbg(DBG_SGPARANOIA, "Map sense buffer %p->%08x(%05x)\n",
dprintkdbg(DBG_SG, "request_sense: map buffer %p->%08x(%05x)\n",
cmd->sense_buffer, srb->segment_x[0].address,
sizeof(cmd->sense_buffer));
srb->sg_count = 1;
......@@ -3829,7 +3693,7 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
if (start_scsi(acb, dcb, srb)) { /* Should only happen, if sb. else grabs the bus */
dprintkl(KERN_DEBUG,
"Request Sense failed for pid %li (%02i-%i)!\n",
"request_sense: (pid#%li) failed <%02i-%i>\n",
srb->cmd->pid, dcb->target_id, dcb->target_lun);
srb_going_to_waiting_move(dcb, srb);
waiting_set_timer(acb, HZ / 100);
......@@ -3858,7 +3722,7 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb;
dcb = kmalloc(sizeof(struct DeviceCtlBlk), GFP_ATOMIC);
dprintkdbg(DBG_0, "device_alloc: device %p\n", dcb);
dprintkdbg(DBG_0, "device_alloc: <%02i-%i>\n", target, lun);
if (!dcb)
return NULL;
dcb->acb = NULL;
......@@ -3899,10 +3763,10 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
list_for_each_entry(p, &acb->dcb_list, list)
if (p->target_id == dcb->target_id)
break;
dprintkdbg(DBG_KG,
"Copy settings from %02i-%02i to %02i-%02i\n",
p->target_id, p->target_lun,
dcb->target_id, dcb->target_lun);
dprintkdbg(DBG_1,
"device_alloc: <%02i-%i> copy from <%02i-%i>\n",
dcb->target_id, dcb->target_lun,
p->target_id, p->target_lun);
dcb->sync_mode = p->sync_mode;
dcb->sync_period = p->sync_period;
dcb->min_nego_period = p->min_nego_period;
......@@ -3952,8 +3816,8 @@ static void adapter_remove_device(struct AdapterCtlBlk *acb,
{
struct DeviceCtlBlk *i;
struct DeviceCtlBlk *tmp;
dprintkdbg(DBG_0, "adapter_remove_device: Remove device (ID %i, LUN %i): %p\n",
dcb->target_id, dcb->target_lun, dcb);
dprintkdbg(DBG_0, "adapter_remove_device: <%02i-%i>\n",
dcb->target_id, dcb->target_lun);
/* fix up any pointers to this device that we have in the adapter */
if (acb->active_dcb == dcb)
......@@ -3986,8 +3850,9 @@ static void adapter_remove_and_free_device(struct AdapterCtlBlk *acb,
struct DeviceCtlBlk *dcb)
{
if (list_size(&dcb->srb_going_list) > 1) {
dprintkdbg(DBG_DCB, "adapter_remove_and_free_device: "
"Won't remove because of %i active requests\n",
dprintkdbg(DBG_1, "adapter_remove_and_free_device: <%02i-%i> "
"Won't remove because of %i active requests.\n",
dcb->target_id, dcb->target_lun,
list_size(&dcb->srb_going_list));
return;
}
......@@ -4006,7 +3871,7 @@ static void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
{
struct DeviceCtlBlk *dcb;
struct DeviceCtlBlk *tmp;
dprintkdbg(DBG_DCB, "adapter_remove_and_free_all_devices: Free all devices (%i devices)\n",
dprintkdbg(DBG_1, "adapter_remove_and_free_all_devices: num=%i\n",
list_size(&acb->dcb_list));
list_for_each_entry_safe(dcb, tmp, &acb->dcb_list, list)
......@@ -4362,10 +4227,8 @@ static void __init print_eeprom_settings(struct NvRamType *eeprom)
clock_speed[eeprom->target[0].period] % 10,
eeprom->target[0].cfg0);
dprintkl(KERN_INFO, " AdaptMode=0x%02x, Tags=%i(%02i), DelayReset=%is\n",
eeprom->channel_cfg,
eeprom->max_tag,
1 << eeprom->max_tag,
eeprom->delay_time);
eeprom->channel_cfg, eeprom->max_tag,
1 << eeprom->max_tag, eeprom->delay_time);
}
......@@ -4435,8 +4298,8 @@ static void __init adapter_print_config(struct AdapterCtlBlk *acb)
u8 bval;
bval = DC395x_read8(acb, TRM_S1040_GEN_STATUS);
dprintkl(KERN_INFO, "%s Connectors: ",
((bval & WIDESCSI) ? "(Wide)" : ""));
dprintkl(KERN_INFO, "%sConnectors: ",
((bval & WIDESCSI) ? "(Wide) " : ""));
if (!(bval & CON5068))
printk("ext%s ", !(bval & EXT68HIGH) ? "68" : "50");
if (!(bval & CON68))
......@@ -4667,9 +4530,9 @@ static int __init adapter_init(struct AdapterCtlBlk *acb, u32 io_port,
adapter_init_chip(acb);
set_basic_config(acb);
dprintkdbg(DBG_0, "adapter_init: acb=%p, pdcb_map=%p "
"psrb_array=%p ACB size=%04x, DCB size=%04x "
"SRB size=%04x\n",
dprintkdbg(DBG_0,
"adapter_init: acb=%p, pdcb_map=%p psrb_array=%p "
"size{acb=0x%04x dcb=0x%04x srb=0x%04x}\n",
acb, acb->dcb_map, acb->srb_array, sizeof(struct AdapterCtlBlk),
sizeof(struct DeviceCtlBlk), sizeof(struct ScsiReqBlk));
return 0;
......@@ -4851,7 +4714,7 @@ static int dc395x_proc_info(struct Scsi_Host *host, char *buffer,
SPRINTF("\n");
}
if (debug_enabled(DBG_DCB)) {
if (debug_enabled(DBG_1)) {
SPRINTF("DCB list for ACB %p:\n", acb);
list_for_each_entry(dcb, &acb->dcb_list, list) {
SPRINTF("%p -> ", dcb);
......@@ -4953,7 +4816,7 @@ static int __devinit dc395x_init_one(struct pci_dev *dev,
/* initialise the adapter and everything we need */
if (adapter_init(acb, io_port_base, io_port_len, irq)) {
dprintkl(KERN_INFO, "DC395x_initAdapter initial ERROR\n");
dprintkl(KERN_INFO, "adapter init failed\n");
scsi_host_put(scsi_host);
return -ENODEV;
}
......@@ -4985,7 +4848,7 @@ static void __devexit dc395x_remove_one(struct pci_dev *dev)
struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)(scsi_host->hostdata);
dprintkdbg(DBG_0, "Removing instance\n");
dprintkdbg(DBG_0, "dc395x_remove_one: acb=%p\n", acb);
scsi_remove_host(scsi_host);
adapter_uninit(acb);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7