Commit 6b9c49c8 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Linus Torvalds

[PATCH] remove dead kernel parameters

Remove "hdx=flash" (ignored since 2.5.63) and "hdx=slow"
(ignored since 2.5.41) kernel parameters.

Also remove "slow" entry from /proc/ide/hdx/settings
and "ata_flash", "nobios" and "slow" fields from ide_drive_t.
parent 2960d471
...@@ -241,17 +241,10 @@ Summary of ide driver parameters for kernel command line ...@@ -241,17 +241,10 @@ Summary of ide driver parameters for kernel command line
and quite likely to cause trouble with and quite likely to cause trouble with
older/odd IDE drives. older/odd IDE drives.
"hdx=slow" : insert a huge pause after each access to the data
port. Should be used only as a last resort.
"hdx=swapdata" : when the drive is a disk, byte swap all data "hdx=swapdata" : when the drive is a disk, byte swap all data
"hdx=bswap" : same as above.......... "hdx=bswap" : same as above..........
"hdx=flash" : allows for more than one ata_flash disk to be
registered. In most cases, only one device
will be present.
"hdx=scsi" : the return of the ide-scsi flag, this is useful for "hdx=scsi" : the return of the ide-scsi flag, this is useful for
allowing ide-floppy, ide-tape, and ide-cdrom|writers allowing ide-floppy, ide-tape, and ide-cdrom|writers
to use ide-scsi emulation on a device specific option. to use ide-scsi emulation on a device specific option.
......
...@@ -238,26 +238,8 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) ...@@ -238,26 +238,8 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
if (id->config & (1<<7)) if (id->config & (1<<7))
drive->removable = 1; drive->removable = 1;
/* if (drive_is_flashcard(drive))
* Prevent long system lockup probing later for non-existant
* slave drive if the hwif is actually a flash memory card of
* some variety:
*/
drive->is_flash = 0;
if (drive_is_flashcard(drive)) {
#if 0
/* The new IDE adapter widgets don't follow this heuristic
so we must nowdays just bite the bullet and take the
probe hit */
ide_drive_t *mate = &hwif->drives[1^drive->select.b.unit];
ide_drive_t *mate = &hwif->drives[1^drive->select.b.unit];
if (!mate->ata_flash) {
mate->present = 0;
mate->noprobe = 1;
}
#endif
drive->is_flash = 1; drive->is_flash = 1;
}
drive->media = ide_disk; drive->media = ide_disk;
printk("%s DISK drive\n", (drive->is_flash) ? "CFA" : "ATA" ); printk("%s DISK drive\n", (drive->is_flash) ? "CFA" : "ATA" );
QUIRK_LIST(drive); QUIRK_LIST(drive);
......
...@@ -1392,7 +1392,6 @@ void ide_add_generic_settings (ide_drive_t *drive) ...@@ -1392,7 +1392,6 @@ void ide_add_generic_settings (ide_drive_t *drive)
ide_add_setting(drive, "keepsettings", SETTING_RW, HDIO_GET_KEEPSETTINGS, HDIO_SET_KEEPSETTINGS, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL); ide_add_setting(drive, "keepsettings", SETTING_RW, HDIO_GET_KEEPSETTINGS, HDIO_SET_KEEPSETTINGS, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL);
ide_add_setting(drive, "nice1", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL); ide_add_setting(drive, "nice1", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL);
ide_add_setting(drive, "pio_mode", SETTING_WRITE, -1, HDIO_SET_PIO_MODE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode); ide_add_setting(drive, "pio_mode", SETTING_WRITE, -1, HDIO_SET_PIO_MODE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode);
ide_add_setting(drive, "slow", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->slow, NULL);
ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, HDIO_GET_UNMASKINTR, HDIO_SET_UNMASKINTR, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL); ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, HDIO_GET_UNMASKINTR, HDIO_SET_UNMASKINTR, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL);
ide_add_setting(drive, "using_dma", SETTING_RW, HDIO_GET_DMA, HDIO_SET_DMA, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma); ide_add_setting(drive, "using_dma", SETTING_RW, HDIO_GET_DMA, HDIO_SET_DMA, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma);
ide_add_setting(drive, "init_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL); ide_add_setting(drive, "init_speed", SETTING_RW, -1, -1, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL);
...@@ -1805,15 +1804,9 @@ static int __initdata is_chipset_set[MAX_HWIFS]; ...@@ -1805,15 +1804,9 @@ static int __initdata is_chipset_set[MAX_HWIFS];
* Not fully supported by all chipset types, * Not fully supported by all chipset types,
* and quite likely to cause trouble with * and quite likely to cause trouble with
* older/odd IDE drives. * older/odd IDE drives.
* "hdx=slow" : insert a huge pause after each access to the data
* port. Should be used only as a last resort.
*
* "hdx=swapdata" : when the drive is a disk, byte swap all data * "hdx=swapdata" : when the drive is a disk, byte swap all data
* "hdx=bswap" : same as above.......... * "hdx=bswap" : same as above..........
* "hdxlun=xx" : set the drive last logical unit. * "hdxlun=xx" : set the drive last logical unit.
* "hdx=flash" : allows for more than one ata_flash disk to be
* registered. In most cases, only one device
* will be present.
* "hdx=scsi" : the return of the ide-scsi flag, this is useful for * "hdx=scsi" : the return of the ide-scsi flag, this is useful for
* allowing ide-floppy, ide-tape, and ide-cdrom|writers * allowing ide-floppy, ide-tape, and ide-cdrom|writers
* to use ide-scsi emulation on a device specific option. * to use ide-scsi emulation on a device specific option.
...@@ -1915,8 +1908,8 @@ int __init ide_setup (char *s) ...@@ -1915,8 +1908,8 @@ int __init ide_setup (char *s)
if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
const char *hd_words[] = { const char *hd_words[] = {
"none", "noprobe", "nowerr", "cdrom", "serialize", "none", "noprobe", "nowerr", "cdrom", "serialize",
"autotune", "noautotune", "slow", "swapdata", "bswap", "autotune", "noautotune", "minus8", "swapdata", "bswap",
"flash", "remap", "remap63", "scsi", NULL }; "minus11", "remap", "remap63", "scsi", NULL };
unit = s[2] - 'a'; unit = s[2] - 'a';
hw = unit / MAX_DRIVES; hw = unit / MAX_DRIVES;
unit = unit % MAX_DRIVES; unit = unit % MAX_DRIVES;
...@@ -1941,7 +1934,6 @@ int __init ide_setup (char *s) ...@@ -1941,7 +1934,6 @@ int __init ide_setup (char *s)
} }
switch (match_parm(&s[3], hd_words, vals, 3)) { switch (match_parm(&s[3], hd_words, vals, 3)) {
case -1: /* "none" */ case -1: /* "none" */
drive->nobios = 1; /* drop into "noprobe" */
case -2: /* "noprobe" */ case -2: /* "noprobe" */
drive->noprobe = 1; drive->noprobe = 1;
goto done; goto done;
...@@ -1963,16 +1955,10 @@ int __init ide_setup (char *s) ...@@ -1963,16 +1955,10 @@ int __init ide_setup (char *s)
case -7: /* "noautotune" */ case -7: /* "noautotune" */
drive->autotune = IDE_TUNE_NOAUTO; drive->autotune = IDE_TUNE_NOAUTO;
goto done; goto done;
case -8: /* "slow" */
drive->slow = 1;
goto done;
case -9: /* "swapdata" */ case -9: /* "swapdata" */
case -10: /* "bswap" */ case -10: /* "bswap" */
drive->bswap = 1; drive->bswap = 1;
goto done; goto done;
case -11: /* "flash" */
drive->ata_flash = 1;
goto done;
case -12: /* "remap" */ case -12: /* "remap" */
drive->remap_0_to_1 = 1; drive->remap_0_to_1 = 1;
goto done; goto done;
......
...@@ -698,7 +698,6 @@ typedef struct ide_drive_s { ...@@ -698,7 +698,6 @@ typedef struct ide_drive_s {
u8 state; /* retry state */ u8 state; /* retry state */
u8 waiting_for_dma; /* dma currently in progress */ u8 waiting_for_dma; /* dma currently in progress */
u8 unmask; /* okay to unmask other irqs */ u8 unmask; /* okay to unmask other irqs */
u8 slow; /* slow data port */
u8 bswap; /* byte swap data */ u8 bswap; /* byte swap data */
u8 dsc_overlap; /* DSC overlap */ u8 dsc_overlap; /* DSC overlap */
u8 nice1; /* give potential excess bandwidth */ u8 nice1; /* give potential excess bandwidth */
...@@ -713,14 +712,12 @@ typedef struct ide_drive_s { ...@@ -713,14 +712,12 @@ typedef struct ide_drive_s {
unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */ unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
unsigned no_unmask : 1; /* disallow setting unmask bit */ unsigned no_unmask : 1; /* disallow setting unmask bit */
unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */ unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
unsigned nobios : 1; /* do not probe bios for drive */
unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */ unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
unsigned nice0 : 1; /* give obvious excess bandwidth */ unsigned nice0 : 1; /* give obvious excess bandwidth */
unsigned nice2 : 1; /* give a share in our own bandwidth */ unsigned nice2 : 1; /* give a share in our own bandwidth */
unsigned doorlocking : 1; /* for removable only: door lock/unlock works */ unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */ unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */ unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
unsigned ata_flash : 1; /* 1=present, 0=default */
unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */ unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */ unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
unsigned addressing; /* : 3; unsigned addressing; /* : 3;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment