Commit 6dc51b6f authored by Alan Cox's avatar Alan Cox Committed by Linus Torvalds

[PATCH] now we have the time logic in Mach_* use it

parent 1ffee2cd
...@@ -55,12 +55,15 @@ ...@@ -55,12 +55,15 @@
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/timer.h> #include <asm/timer.h>
#include <linux/mc146818rtc.h> #include "mach_time.h"
#include <linux/timex.h> #include <linux/timex.h>
#include <linux/config.h> #include <linux/config.h>
#include <asm/arch_hooks.h> #include <asm/arch_hooks.h>
#include "io_ports.h"
extern spinlock_t i8259A_lock; extern spinlock_t i8259A_lock;
int pit_latch_buggy; /* extern */ int pit_latch_buggy; /* extern */
...@@ -138,80 +141,13 @@ void do_settimeofday(struct timeval *tv) ...@@ -138,80 +141,13 @@ void do_settimeofday(struct timeval *tv)
clock_was_set(); clock_was_set();
} }
/* monotonic_clock(): returns # of nanoseconds passed since time_init()
* Note: This function is required to return accurate
* time even in the absence of multiple timer ticks.
*/
unsigned long long monotonic_clock(void)
{
return timer->monotonic_clock();
}
EXPORT_SYMBOL(monotonic_clock);
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
* called 500 ms after the second nowtime has started, because when
* nowtime is written into the registers of the CMOS clock, it will
* jump to the next second precisely 500 ms later. Check the Motorola
* MC146818A or Dallas DS12887 data sheet for details.
*
* BUG: This routine does not handle hour overflow properly; it just
* sets the minutes. Usually you'll only notice that after reboot!
*/
static int set_rtc_mmss(unsigned long nowtime) static int set_rtc_mmss(unsigned long nowtime)
{ {
int retval = 0; int retval;
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
/* gets recalled with irq locally disabled */ /* gets recalled with irq locally disabled */
spin_lock(&rtc_lock); spin_lock(&rtc_lock);
save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ retval = mach_set_rtc_mmss(nowtime);
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
BCD_TO_BIN(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
real_minutes += 30; /* correct for half hour time zone */
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(real_seconds);
BIN_TO_BCD(real_minutes);
}
CMOS_WRITE(real_seconds,RTC_SECONDS);
CMOS_WRITE(real_minutes,RTC_MINUTES);
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
/* The following flags have to be released exactly in this order,
* otherwise the DS12887 (popular MC146818A clone with integrated
* battery and quartz) will not reset the oscillator and will not
* update precisely 500 ms later. You won't find this mentioned in
* the Dallas Semiconductor data sheets, but who believes data
* sheets anyway ... -- Markus Kuhn
*/
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
spin_unlock(&rtc_lock); spin_unlock(&rtc_lock);
return retval; return retval;
...@@ -222,6 +158,17 @@ static long last_rtc_update; ...@@ -222,6 +158,17 @@ static long last_rtc_update;
int timer_ack; int timer_ack;
/* monotonic_clock(): returns # of nanoseconds passed since time_init()
* Note: This function is required to return accurate
* time even in the absence of multiple timer ticks.
*/
unsigned long long monotonic_clock(void)
{
return timer->monotonic_clock();
}
EXPORT_SYMBOL(monotonic_clock);
/* /*
* timer_interrupt() needs to keep up the real-time clock, * timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick * as well as call the "do_timer()" routine every clocktick
...@@ -237,9 +184,9 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg ...@@ -237,9 +184,9 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg
* on an 82489DX-based system. * on an 82489DX-based system.
*/ */
spin_lock(&i8259A_lock); spin_lock(&i8259A_lock);
outb(0x0c, 0x20); outb(0x0c, PIC_MASTER_OCW3);
/* Ack the IRQ; AEOI will end it automatically. */ /* Ack the IRQ; AEOI will end it automatically. */
inb(0x20); inb(PIC_MASTER_POLL);
spin_unlock(&i8259A_lock); spin_unlock(&i8259A_lock);
} }
#endif #endif
...@@ -253,8 +200,10 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg ...@@ -253,8 +200,10 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg
*/ */
if ((time_status & STA_UNSYNC) == 0 && if ((time_status & STA_UNSYNC) == 0 &&
xtime.tv_sec > last_rtc_update + 660 && xtime.tv_sec > last_rtc_update + 660 &&
(xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && (xtime.tv_nsec / 1000)
(xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { >= USEC_AFTER - ((unsigned) TICK_SIZE) / 2 &&
(xtime.tv_nsec / 1000)
<= USEC_BEFORE + ((unsigned) TICK_SIZE) / 2) {
if (set_rtc_mmss(xtime.tv_sec) == 0) if (set_rtc_mmss(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec; last_rtc_update = xtime.tv_sec;
else else
...@@ -341,43 +290,15 @@ void timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) ...@@ -341,43 +290,15 @@ void timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* not static: needed by APM */ /* not static: needed by APM */
unsigned long get_cmos_time(void) unsigned long get_cmos_time(void)
{ {
unsigned int year, mon, day, hour, min, sec; unsigned long retval;
int i;
spin_lock(&rtc_lock); spin_lock(&rtc_lock);
/* The Linux interpretation of the CMOS clock register contents:
* When the Update-In-Progress (UIP) flag goes from 1 to 0, the retval = mach_get_cmos_time();
* RTC registers show the second which has precisely just started.
* Let's hope other operating systems interpret the RTC the same way.
*/
/* read RTC exactly on falling edge of update flag */
for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
break;
for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
break;
do { /* Isn't this overkill ? UIP above should guarantee consistency */
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
hour = CMOS_READ(RTC_HOURS);
day = CMOS_READ(RTC_DAY_OF_MONTH);
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
} while (sec != CMOS_READ(RTC_SECONDS));
if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
{
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
BCD_TO_BIN(day);
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
}
spin_unlock(&rtc_lock); spin_unlock(&rtc_lock);
if ((year += 1900) < 1970)
year += 100; return retval;
return mktime(year, mon, day, hour, min, sec);
} }
/* XXX this driverfs stuff should probably go elsewhere later -john */ /* XXX this driverfs stuff should probably go elsewhere later -john */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment