Merge branch 'for-3.13-fixes' into for-3.14

A scheduled horkage patch will conflict with HORKAGE changes in
for-3.13-fixes.  Pull in to avoid unnecessary merge conflicts.
Signed-off-by: Tejun Heo <tj@kernel.org>

Documentation/kernel-parameters.txt

@@ -1529,6 +1529,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			* atapi_dmadir: Enable ATAPI DMADIR bridge support
 
+			* disable: Disable this device.
+
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 

drivers/ata/ahci.c

@@ -429,6 +429,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9128 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9125),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_MARVELL_EXT, 0x9178,
+			 PCI_VENDOR_ID_MARVELL_EXT, 0x9170),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9170 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172),
@@ -1280,15 +1283,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	/* AHCI controllers often implement SFF compatible interface.
-	 * Grab all PCI BARs just in case.
-	 */
-	rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
-	if (rc == -EBUSY)
-		pcim_pin_device(pdev);
-	if (rc)
-		return rc;
-
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 	    (pdev->device == 0x2652 || pdev->device == 0x2653)) {
 		u8 map;
@@ -1305,6 +1299,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
+	/* AHCI controllers often implement SFF compatible interface.
+	 * Grab all PCI BARs just in case.
+	 */
+	rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME);
+	if (rc == -EBUSY)
+		pcim_pin_device(pdev);
+	if (rc)
+		return rc;
+
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;

drivers/ata/libata-core.c

@@ -2149,9 +2149,16 @@ static int ata_dev_config_ncq(struct ata_device *dev,
 				    "failed to get NCQ Send/Recv Log Emask 0x%x\n",
 				    err_mask);
 		} else {
+			u8 *cmds = dev->ncq_send_recv_cmds;
+
 			dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
-			memcpy(dev->ncq_send_recv_cmds, ap->sector_buf,
-				ATA_LOG_NCQ_SEND_RECV_SIZE);
+			memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE);
+
+			if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) {
+				ata_dev_dbg(dev, "disabling queued TRIM support\n");
+				cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &=
+					~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM;
+			}
 		}
 	}
 
@@ -4205,6 +4212,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "PIONEER DVD-RW  DVR-212D",	NULL,	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
+	/* devices that don't properly handle queued TRIM commands */
+	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+	{ "Crucial_CT???M500SSD1",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
+
 	/* End Marker */
 	{ }
 };
@@ -6522,6 +6533,7 @@ static int __init ata_parse_force_one(char **cur,
 		{ "norst",	.lflags		= ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
 		{ "rstonce",	.lflags		= ATA_LFLAG_RST_ONCE },
 		{ "atapi_dmadir", .horkage_on	= ATA_HORKAGE_ATAPI_DMADIR },
+		{ "disable",	.horkage_on	= ATA_HORKAGE_DISABLE },
 	};
 	char *start = *cur, *p = *cur;
 	char *id, *val, *endp;

drivers/ata/libata-scsi.c

@@ -3871,6 +3871,27 @@ void ata_scsi_hotplug(struct work_struct *work)
 		return;
 	}
 
+	/*
+	 * XXX - UGLY HACK
+	 *
+	 * The block layer suspend/resume path is fundamentally broken due
+	 * to freezable kthreads and workqueue and may deadlock if a block
+	 * device gets removed while resume is in progress.  I don't know
+	 * what the solution is short of removing freezable kthreads and
+	 * workqueues altogether.
+	 *
+	 * The following is an ugly hack to avoid kicking off device
+	 * removal while freezer is active.  This is a joke but does avoid
+	 * this particular deadlock scenario.
+	 *
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=62801
+	 * http://marc.info/?l=linux-kernel&m=138695698516487
+	 */
+#ifdef CONFIG_FREEZER
+	while (pm_freezing)
+		msleep(10);
+#endif
+
 	DPRINTK("ENTER\n");
 	mutex_lock(&ap->scsi_scan_mutex);
 

drivers/ata/sata_sis.c

@@ -83,6 +83,10 @@ static struct pci_driver sis_pci_driver = {
 	.id_table		= sis_pci_tbl,
 	.probe			= sis_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
+#endif
 };
 
 static struct scsi_host_template sis_sht = {

include/linux/libata.h

@@ -418,6 +418,7 @@ enum {
 	ATA_HORKAGE_DUMP_ID	= (1 << 16),	/* dump IDENTIFY data */
 	ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17),	/* Set max sects to 65535 */
 	ATA_HORKAGE_ATAPI_DMADIR = (1 << 18),	/* device requires dmadir */
+	ATA_HORKAGE_NO_NCQ_TRIM	= (1 << 19),	/* don't use queued TRIM */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */

kernel/freezer.c

@@ -19,6 +19,12 @@ EXPORT_SYMBOL(system_freezing_cnt);
 bool pm_freezing;
 bool pm_nosig_freezing;
 
+/*
+ * Temporary export for the deadlock workaround in ata_scsi_hotplug().
+ * Remove once the hack becomes unnecessary.
+ */
+EXPORT_SYMBOL_GPL(pm_freezing);
+
 /* protects freezing and frozen transitions */
 static DEFINE_SPINLOCK(freezer_lock);