qeth: provide specific message for OSA-adapters exclusively used

Exclusive usage of OSA-cards has been introduced. Even though Linux
does not make use of it, qeth should be prepared to receive a bad RC
for some initialization steps. A meaningful message is now given,
if an OSA-device is set online, even though the OSA-adapter is already
exclusively used by another host.
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/s390/net/qeth_main.c

@@ -1541,8 +1541,13 @@ qeth_idx_write_cb(struct qeth_channel *channel, struct qeth_cmd_buffer *iob)
 	card = CARD_FROM_CDEV(channel->ccwdev);
 
 	if (!(QETH_IS_IDX_ACT_POS_REPLY(iob->data))) {
-		PRINT_ERR("IDX_ACTIVATE on write channel device %s: negative "
-			  "reply\n", CARD_WDEV_ID(card));
+		if (QETH_IDX_ACT_CAUSE_CODE(iob->data) == 0x19)
+			PRINT_ERR("IDX_ACTIVATE on write channel device %s: "
+				"adapter exclusively used by another host\n",
+				CARD_WDEV_ID(card));
+		else
+			PRINT_ERR("IDX_ACTIVATE on write channel device %s: "
+				"negative reply\n", CARD_WDEV_ID(card));
 		goto out;
 	}
 	memcpy(&temp, QETH_IDX_ACT_FUNC_LEVEL(iob->data), 2);
@@ -1596,8 +1601,13 @@ qeth_idx_read_cb(struct qeth_channel *channel, struct qeth_cmd_buffer *iob)
 			goto out;
 	}
 	if (!(QETH_IS_IDX_ACT_POS_REPLY(iob->data))) {
-		PRINT_ERR("IDX_ACTIVATE on read channel device %s: negative "
-			  "reply\n", CARD_RDEV_ID(card));
+		if (QETH_IDX_ACT_CAUSE_CODE(iob->data) == 0x19)
+			PRINT_ERR("IDX_ACTIVATE on read channel device %s: "
+				"adapter exclusively used by another host\n",
+				CARD_RDEV_ID(card));
+		else
+			PRINT_ERR("IDX_ACTIVATE on read channel device %s: "
+				"negative reply\n", CARD_RDEV_ID(card));
 		goto out;
 	}
 

drivers/s390/net/qeth_mpc.h

@@ -565,6 +565,7 @@ extern unsigned char IDX_ACTIVATE_WRITE[];
 #define QETH_IDX_ACT_QDIO_DEV_REALADDR(buffer) (buffer+0x20)
 #define QETH_IS_IDX_ACT_POS_REPLY(buffer) (((buffer)[0x08]&3)==2)
 #define QETH_IDX_REPLY_LEVEL(buffer) (buffer+0x12)
+#define QETH_IDX_ACT_CAUSE_CODE(buffer) (buffer)[0x09]
 
 #define PDU_ENCAPSULATION(buffer) \
 	(buffer + *(buffer + (*(buffer+0x0b)) + \