Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "The cleanup branch keeps going down in size as we've completed a lot
  of the major legacy platform removals and conversions.

  A handful of changes this time around, some of the themes or larger
  sets are:

   - A bunch of i.MX cleanups around platform detection, init call cleanups
   - Misc fixes of missing/implicit includes
   - Removal of ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
  ARM: mps2: fix typo
  ARM: s3c64xx: avoid warning about 'struct device_node'
  bus: mvebu-mbus: make mvebu_mbus_syscore_ops static
  bus: mvebu-mbus: fix __iomem on register pointers
  ARM: tegra: Remove board_init_funcs array
  ARM: iop: Fix indentation
  ARM: imx: remove cpu_is_mx*()
  ARM: imx: remove last call to cpu_is_mx5*
  ARM: imx: rework mx27_pm_init() call
  ARM: imx: deconstruct mx3_idle
  ARM: imx: deconstruct mxc_rnga initialization
  ARM: imx: remove cpu_is_mx1 check
  ARM: i.MX: Do not explicitly call l2x0_of_init()
  ARM: i.MX: system.c: Tweak prefetch settings for performance
  ARM: i.MX: system.c: Replace magic numbers
  ARM: i.MX: system.c: Remove redundant errata 752271 code
  ARM: i.MX: system.c: Convert goto to if statement
  ARM: Kirkwood: fix kirkwood_pm_init() declaration/type
  ARM: Kirkwood: make kirkwood_disable_mbus_error_propagation() static
  ARM: orion5x: make orion5x_legacy_handle_irq static
  ...

arch/arm/Kconfig

@@ -327,7 +327,6 @@ choice
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
@@ -342,7 +341,6 @@ config ARCH_MULTIPLATFORM
 config ARM_SINGLE_ARMV7M
 	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
 	depends on !MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_NVIC
 	select AUTO_ZRELADDR
 	select CLKSRC_OF
@@ -356,12 +354,12 @@ config ARM_SINGLE_ARMV7M
 
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
 	select CLPS711X_TIMER
+	select GPIOLIB
 	select MFD_SYSCON
 	select SOC_BUS
 	help
@@ -369,10 +367,10 @@ config ARCH_CLPS711X
 
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_FA526
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -393,7 +391,6 @@ config ARCH_EBSA110
 config ARCH_EP93XX
 	bool "EP93xx-based"
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
@@ -402,6 +399,7 @@ config ARCH_EP93XX
 	select CLKSRC_MMIO
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -442,9 +440,9 @@ config ARCH_IOP13XX
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
+	select GPIOLIB
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -455,9 +453,9 @@ config ARCH_IOP32X
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select GPIO_IOP
+	select GPIOLIB
 	select NEED_RET_TO_USER
 	select PCI
 	select PLAT_IOP
@@ -468,12 +466,12 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
@@ -483,9 +481,9 @@ config ARCH_IXP4XX
 
 config ARCH_DOVE
 	bool "Marvell Dove"
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
@@ -499,10 +497,10 @@ config ARCH_DOVE
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_ARM922T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
@@ -510,11 +508,11 @@ config ARCH_KS8695
 
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
 	  At present, the w90x900 has been renamed nuc900, regarding
@@ -526,13 +524,13 @@ config ARCH_W90X900
 
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKDEV_LOOKUP
 	select CLKSRC_LPC32XX
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
@@ -543,7 +541,6 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
 	select COMMON_CLK
@@ -554,6 +551,7 @@ config ARCH_PXA
 	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
@@ -584,7 +582,6 @@ config ARCH_RPC
 config ARCH_SA1100
 	bool "SA1100-based"
 	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
@@ -593,6 +590,7 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
@@ -604,12 +602,12 @@ config ARCH_SA1100
 
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select ARCH_REQUIRE_GPIOLIB
 	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -625,12 +623,12 @@ config ARCH_S3C24XX
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CPU_ARM926T
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select HAVE_IDE
 	select USE_OF
 	select ZONE_DMA
@@ -642,11 +640,11 @@ config ARCH_OMAP1
 	depends on MMU
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
@@ -868,7 +866,7 @@ source "arch/arm/mach-zynq/Kconfig"
 config ARCH_EFM32
 	bool "Energy Micro efm32"
 	depends on ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	help
 	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
 	  processors.
@@ -901,7 +899,7 @@ config MACH_STM32F429
 	default y
 
 config ARCH_MPS2
-	bool "ARM MPS2 paltform"
+	bool "ARM MPS2 platform"
 	depends on ARM_SINGLE_ARMV7M
 	select ARM_AMBA
 	select CLKSRC_MPS2

arch/arm/mach-at91/Kconfig

 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_AT91
+	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
 

arch/arm/mach-bcm/Kconfig

@@ -17,7 +17,7 @@ config ARCH_BCM_IPROC
 	select ARM_GLOBAL_TIMER
 	select COMMON_CLK_IPROC
 	select CLKSRC_MMIO
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
 	help
@@ -80,7 +80,7 @@ comment "KONA architected SoCs"
 
 config ARCH_BCM_MOBILE
 	bool
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_GIC
@@ -138,7 +138,7 @@ comment "Other Architectures"
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family"
 	depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_411920 if ARCH_MULTI_V6
 	select ARM_TIMER_SP804
@@ -178,7 +178,6 @@ config ARCH_BRCMSTB
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select SOC_BRCMSTB
 	select SOC_BUS
 	help

arch/arm/mach-berlin/Kconfig

@@ -2,11 +2,11 @@ menuconfig ARCH_BERLIN
 	bool "Marvell Berlin SoCs"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MFD_SYSCON
 	select PINCTRL
 

arch/arm/mach-digicolor/Kconfig

 config ARCH_DIGICOLOR
 	bool "Conexant Digicolor SoC Support"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select DIGICOLOR_TIMER
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MFD_SYSCON
 	select PINCTRL
 	select PINCTRL_DIGICOLOR

arch/arm/mach-exynos/Kconfig

@@ -12,13 +12,13 @@ menuconfig ARCH_EXYNOS
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select COMMON_CLK_SAMSUNG
 	select EXYNOS_THERMAL
 	select EXYNOS_PMU
 	select EXYNOS_SROM
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG

arch/arm/mach-imx/Kconfig

 menuconfig ARCH_MXC
 	bool "Freescale i.MX family"
 	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select PINCTRL
 	select PM_OPP if PM
 	select SOC_BUS
@@ -44,9 +44,6 @@ config MXC_USE_EPIT
 	  uses the same clocks as the GPT. Anyway, on some systems the GPT
 	  may be in use for other purposes.
 
-config ARCH_HAS_RNGA
-	bool
-
 config HAVE_IMX_ANATOP
 	bool
 
@@ -90,7 +87,6 @@ config SOC_IMX27
 config SOC_IMX31
 	bool
 	select CPU_V6
-	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 

arch/arm/mach-imx/Makefile

@@ -8,8 +8,8 @@ obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)

arch/arm/mach-imx/common.h

@@ -32,7 +32,6 @@ void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
 void mxc_init_irq(void __iomem *);
-void tzic_init_irq(void);
 void mx1_init_irq(void);
 void mx21_init_irq(void);
 void mx27_init_irq(void);
@@ -55,6 +54,7 @@ struct platform_device *mxc_register_gpio(char *name, int id,
 void mxc_set_cpu_type(unsigned int type);
 void mxc_restart(enum reboot_mode, const char *);
 void mxc_arch_reset_init(void __iomem *);
+void imx1_reset_init(void __iomem *);
 void imx_set_aips(void __iomem *);
 void imx_aips_allow_unprivileged_access(const char *compat);
 int mxc_device_init(void);
@@ -67,6 +67,7 @@ void imx_gpc_set_arm_power_in_lpm(bool power_off);
 void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
 void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
 void imx25_pm_init(void);
+void imx27_pm_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */

arch/arm/mach-imx/cpu-imx5.c

@@ -60,13 +60,9 @@ static int get_mx51_srev(void)
 /*
  * Returns:
  *	the silicon revision of the cpu
- *	-EINVAL - not a mx51
  */
 int mx51_revision(void)
 {
-	if (!cpu_is_mx51())
-		return -EINVAL;
-
 	if (mx5_cpu_rev == -1)
 		mx5_cpu_rev = get_mx51_srev();
 
@@ -112,13 +108,9 @@ static int get_mx53_srev(void)
 /*
  * Returns:
  *	the silicon revision of the cpu
- *	-EINVAL - not a mx53
  */
 int mx53_revision(void)
 {
-	if (!cpu_is_mx53())
-		return -EINVAL;
-
 	if (mx5_cpu_rev == -1)
 		mx5_cpu_rev = get_mx53_srev();
 

arch/arm/mach-imx/cpu.c

@@ -10,8 +10,6 @@
 #include "common.h"
 
 unsigned int __mxc_cpu_type;
-EXPORT_SYMBOL(__mxc_cpu_type);
-
 static unsigned int imx_soc_revision;
 
 void mxc_set_cpu_type(unsigned int type)

arch/arm/mach-imx/devices/Kconfig

@@ -57,10 +57,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC
 config IMX_HAVE_PLATFORM_MXC_NAND
 	bool
 
-config IMX_HAVE_PLATFORM_MXC_RNGA
-	bool
-	select ARCH_HAS_RNGA
-
 config IMX_HAVE_PLATFORM_MXC_RTC
 	bool
 

arch/arm/mach-imx/devices/platform-mxc_rnga.c

-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-struct imx_mxc_rnga_data {
-	resource_size_t iobase;
-};
-
-#define imx_mxc_rnga_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _RNGA_BASE_ADDR,			\
-	}
-
-#ifdef CONFIG_SOC_IMX31
-static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst =
-	imx_mxc_rnga_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-static struct platform_device *__init imx_add_mxc_rnga(
-		const struct imx_mxc_rnga_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-	return imx_add_platform_device("mxc_rnga", -1,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
-
-static int __init imxXX_add_mxc_rnga(void)
-{
-	struct platform_device *ret;
-
-#if defined(CONFIG_SOC_IMX31)
-	if (cpu_is_mx31())
-		ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data);
-	else
-#endif /* if defined(CONFIG_SOC_IMX31) */
-		ret = ERR_PTR(-ENODEV);
-
-	return PTR_ERR_OR_ZERO(ret);
-}
-arch_initcall(imxXX_add_mxc_rnga);

arch/arm/mach-imx/eukrea-baseboards.h

-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on board-pcm038.h which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_EUKREA_BASEBOARDS_H__
-#define __MACH_EUKREA_BASEBOARDS_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
- *
- * This example here is for the development board. Refer
- * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
- * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
- */
-
-extern void eukrea_mbimxsd25_baseboard_init(void);
-extern void eukrea_mbimxsd35_baseboard_init(void);
-
-#endif
-
-#endif /* __MACH_EUKREA_BASEBOARDS_H__ */

arch/arm/mach-imx/imx27-dt.c

@@ -27,5 +27,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
 	.init_irq	= mx27_init_irq,
+	.init_late	= imx27_pm_init,
 	.dt_compat	= imx27_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/imx31-dt.c

@@ -28,10 +28,22 @@ static void __init imx31_dt_timer_init(void)
 	mx31_clocks_init_dt();
 }
 
+/* FIXME: replace with DT binding */
+static const struct resource imx31_rnga_res[] __initconst = {
+	DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
+};
+
+static void __init imx31_dt_mach_init(void)
+{
+	platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
+					ARRAY_SIZE(imx31_rnga_res));
+}
+
 DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.map_io		= mx31_map_io,
 	.init_early	= imx31_init_early,
 	.init_irq	= mx31_init_irq,
 	.init_time	= imx31_dt_timer_init,
+	.init_machine	= imx31_dt_mach_init,
 	.dt_compat	= imx31_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/imx35-dt.c

@@ -20,20 +20,16 @@
 #include "common.h"
 #include "mx35.h"
 
-static void __init imx35_irq_init(void)
-{
-	imx_init_l2cache();
-	mx35_init_irq();
-}
-
 static const char * const imx35_dt_board_compat[] __initconst = {
 	"fsl,imx35",
 	NULL
 };
 
 DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.map_io		= mx35_map_io,
 	.init_early	= imx35_init_early,
-	.init_irq	= imx35_irq_init,
+	.init_irq	= mx35_init_irq,
 	.dt_compat	= imx35_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/mach-imx50.c

@@ -22,6 +22,5 @@ static const char * const imx50_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
-	.init_irq	= tzic_init_irq,
 	.dt_compat	= imx50_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/mach-imx51.c

@@ -67,7 +67,6 @@ static const char * const imx51_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.init_early	= imx51_init_early,
-	.init_irq	= tzic_init_irq,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,

arch/arm/mach-imx/mach-imx53.c

@@ -47,7 +47,6 @@ static const char * const imx53_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.init_early	= imx53_init_early,
-	.init_irq	= tzic_init_irq,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,

arch/arm/mach-imx/mach-imx6q.c

@@ -407,6 +407,8 @@ static const char * const imx6q_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,

arch/arm/mach-imx/mach-imx6sl.c

@@ -75,6 +75,8 @@ static const char * const imx6sl_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_irq	= imx6sl_init_irq,
 	.init_machine	= imx6sl_init_machine,
 	.init_late      = imx6sl_init_late,

arch/arm/mach-imx/mach-imx6sx.c

@@ -103,6 +103,8 @@ static const char * const imx6sx_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_irq	= imx6sx_init_irq,
 	.init_machine	= imx6sx_init_machine,
 	.dt_compat	= imx6sx_dt_compat,

arch/arm/mach-imx/mm-imx1.c

@@ -50,7 +50,7 @@ void __init mx1_init_irq(void)
 
 void __init imx1_soc_init(void)
 {
-	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
+	imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
 	mxc_device_init();
 
 	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,

arch/arm/mach-imx/mm-imx27.c

@@ -98,4 +98,6 @@ void __init imx27_soc_init(void)
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
 					ARRAY_SIZE(imx27_audmux_res));
+
+	imx27_pm_init();
 }

arch/arm/mach-imx/mm-imx3.c

@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
@@ -38,8 +39,6 @@ static void imx3_idle(void)
 {
 	unsigned long reg = 0;
 
-	mx3_cpu_lp_set(MX3_WAIT);
-
 	__asm__ __volatile__(
 		/* disable I and D cache */
 		"mrc p15, 0, %0, c1, c0, 0\n"
@@ -135,11 +134,20 @@ void __init mx31_map_io(void)
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
+static void imx31_idle(void)
+{
+	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_LPM_MASK;
+	imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
+
+	imx3_idle();
+}
+
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	arch_ioremap_caller = imx3_ioremap_caller;
-	arm_pm_idle = imx3_idle;
+	arm_pm_idle = imx31_idle;
 	mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
 }
 
@@ -167,6 +175,10 @@ static const struct resource imx31_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
 };
 
+static const struct resource imx31_rnga_res[] __initconst = {
+	DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
+};
+
 void __init imx31_soc_init(void)
 {
 	int to_version = mx31_revision() >> 4;
@@ -195,6 +207,8 @@ void __init imx31_soc_init(void)
 
 	platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
 					ARRAY_SIZE(imx31_audmux_res));
+	platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
+					ARRAY_SIZE(imx31_rnga_res));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
@@ -212,11 +226,21 @@ void __init mx35_map_io(void)
 	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }
 
+static void imx35_idle(void)
+{
+	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_LPM_MASK;
+	reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
+	imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
+
+	imx3_idle();
+}
+
 void __init imx35_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	arm_pm_idle = imx3_idle;
+	arm_pm_idle = imx35_idle;
 	arch_ioremap_caller = imx3_ioremap_caller;
 	mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
 }

arch/arm/mach-imx/mxc.h

@@ -45,105 +45,7 @@
 
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
-#endif
-
-#ifdef CONFIG_SOC_IMX1
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX1
-# endif
-# define cpu_is_mx1()		(mxc_cpu_type == MXC_CPU_MX1)
-#else
-# define cpu_is_mx1()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX21
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX21
-# endif
-# define cpu_is_mx21()		(mxc_cpu_type == MXC_CPU_MX21)
-#else
-# define cpu_is_mx21()		(0)
-#endif
 
-#ifdef CONFIG_SOC_IMX25
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX25
-# endif
-# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
-#else
-# define cpu_is_mx25()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX27
-# endif
-# define cpu_is_mx27()		(mxc_cpu_type == MXC_CPU_MX27)
-#else
-# define cpu_is_mx27()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX31
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX31
-# endif
-# define cpu_is_mx31()		(mxc_cpu_type == MXC_CPU_MX31)
-#else
-# define cpu_is_mx31()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX35
-# endif
-# define cpu_is_mx35()		(mxc_cpu_type == MXC_CPU_MX35)
-#else
-# define cpu_is_mx35()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX51
-# endif
-# define cpu_is_mx51()		(mxc_cpu_type == MXC_CPU_MX51)
-#else
-# define cpu_is_mx51()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX53
-# endif
-# define cpu_is_mx53()		(mxc_cpu_type == MXC_CPU_MX53)
-#else
-# define cpu_is_mx53()		(0)
-#endif
-
-#ifndef __ASSEMBLY__
 #ifdef CONFIG_SOC_IMX6SL
 static inline bool cpu_is_imx6sl(void)
 {
@@ -190,9 +92,6 @@ int tzic_enable_wake(void);
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
-#define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
-
 #define imx_readl	readl_relaxed
 #define imx_readw	readw_relaxed
 #define imx_writel	writel_relaxed

arch/arm/mach-imx/pm-imx27.c

@@ -37,13 +37,7 @@ static const struct platform_suspend_ops mx27_suspend_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
-static int __init mx27_pm_init(void)
+void __init imx27_pm_init(void)
 {
-	if (!cpu_is_mx27())
-		return 0;
-
 	suspend_set_ops(&mx27_suspend_ops);
-	return 0;
 }
-
-device_initcall(mx27_pm_init);

arch/arm/mach-imx/pm-imx3.c

-/*
- *  Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/io.h>
-
-#include "common.h"
-#include "crmregs-imx3.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-
-/*
- * Set cpu low power mode before WFI instruction. This function is called
- * mx3 because it can be used for mx31 and mx35.
- * Currently only WAIT_MODE is supported.
- */
-void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
-{
-	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_LPM_MASK;
-
-	switch (mode) {
-	case MX3_WAIT:
-		if (cpu_is_mx35())
-			reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
-		imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
-		break;
-	default:
-		pr_err("Unknown cpu power mode: %d\n", mode);
-		return;
-	}
-}

arch/arm/mach-imx/system.c

@@ -34,25 +34,19 @@
 
 static void __iomem *wdog_base;
 static struct clk *wdog_clk;
+static int wcr_enable = (1 << 2);
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void mxc_restart(enum reboot_mode mode, const char *cmd)
 {
-	unsigned int wcr_enable;
-
 	if (!wdog_base)
 		goto reset_fallback;
 
 	if (!IS_ERR(wdog_clk))
 		clk_enable(wdog_clk);
 
-	if (cpu_is_mx1())
-		wcr_enable = (1 << 0);
-	else
-		wcr_enable = (1 << 2);
-
 	/* Assert SRS signal */
 	imx_writew(wcr_enable, wdog_base);
 	/*
@@ -89,6 +83,14 @@ void __init mxc_arch_reset_init(void __iomem *base)
 		clk_prepare(wdog_clk);
 }
 
+#ifdef CONFIG_SOC_IMX1
+void __init imx1_reset_init(void __iomem *base)
+{
+	wcr_enable = (1 << 0);
+	mxc_arch_reset_init(base);
+}
+#endif
+
 #ifdef CONFIG_CACHE_L2X0
 void __init imx_init_l2cache(void)
 {
@@ -98,38 +100,28 @@ void __init imx_init_l2cache(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
 	if (!np)
-		goto out;
+		return;
 
 	l2x0_base = of_iomap(np, 0);
-	if (!l2x0_base) {
-		of_node_put(np);
-		goto out;
-	}
-
-	if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)
-		goto skip_if_enabled;
+	if (!l2x0_base)
+		goto put_node;
 
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
 		/* Configure the L2 PREFETCH and POWER registers */
 		val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
-	val |= 0x70800000;
-	/*
-	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
-	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
-	 * But according to ARM PL310 errata: 752271
-	 * ID: 752271: Double linefill feature can cause data corruption
-	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
-	 * Workaround: The only workaround to this erratum is to disable the
-	 * double linefill feature. This is the default behavior.
-	 */
-	if (cpu_is_imx6q())
-		val &= ~(1 << 30 | 1 << 23);
+		val |= L310_PREFETCH_CTRL_DBL_LINEFILL |
+			L310_PREFETCH_CTRL_INSTR_PREFETCH |
+			L310_PREFETCH_CTRL_DATA_PREFETCH;
+
+		/* Set perfetch offset to improve performance */
+		val &= ~L310_PREFETCH_CTRL_OFFSET_MASK;
+		val |= 15;
+
 		writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
+	}
 
-skip_if_enabled:
 	iounmap(l2x0_base);
+put_node:
 	of_node_put(np);
-
-out:
-	l2x0_of_init(0, ~0);
 }
 #endif

arch/arm/mach-imx/tzic.c

@@ -9,12 +9,11 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -153,13 +152,11 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init tzic_init_irq(void)
+static int __init tzic_init_dt(struct device_node *np, struct device_node *p)
 {
-	struct device_node *np;
 	int irq_base;
 	int i;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
 	tzic_base = of_iomap(np, 0);
 	WARN_ON(!tzic_base);
 
@@ -199,7 +196,10 @@ void __init tzic_init_irq(void)
 #endif
 
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+
+	return 0;
 }
+IRQCHIP_DECLARE(tzic, "fsl,tzic", tzic_init_dt);
 
 /**
  * tzic_enable_wake() - enable wakeup interrupt

arch/arm/mach-integrator/Kconfig

@@ -32,9 +32,9 @@ config ARCH_INTEGRATOR_AP
 config INTEGRATOR_IMPD1
 	bool "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
-	select GPIO_PL061 if GPIOLIB
+	select GPIO_PL061
+	select GPIOLIB
 	help
 	  The IM-PD1 is an add-on logic module for the Integrator which
 	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.

arch/arm/mach-meson/Kconfig

 menuconfig ARCH_MESON
 	bool "Amlogic Meson SoCs"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select ARM_GIC
 	select CACHE_L2X0

arch/arm/mach-mmp/Kconfig

 menuconfig ARCH_MMP
 	bool "Marvell PXA168/910/MMP2"
 	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select GPIO_PXA
+	select GPIOLIB
 	select PINCTRL
 	select PLAT_PXA
 	help

arch/arm/mach-moxart/Kconfig

@@ -5,7 +5,7 @@ menuconfig ARCH_MOXART
 	select ARM_DMA_MEM_BUFFERABLE
 	select MOXART_TIMER
 	select GENERIC_IRQ_CHIP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PHYLIB if NETDEVICES
 	help
 	  Say Y here if you want to run your kernel on hardware with a

arch/arm/mach-mv78xx0/Kconfig

 menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
+	select GPIOLIB
 	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY

arch/arm/mach-mvebu/Kconfig

@@ -8,7 +8,7 @@ menuconfig ARCH_MVEBU
 	select SOC_BUS
 	select MVEBU_MBUS
 	select ZONE_DMA if ARM_LPAE
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PCI_QUIRKS if PCI
 	select OF_ADDRESS_PCI
 
@@ -119,8 +119,8 @@ config MACH_DOVE
 config MACH_KIRKWOOD
 	bool "Marvell Kirkwood boards"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
+	select GPIOLIB
 	select KIRKWOOD_CLK
 	select MACH_MVEBU_ANY
 	select ORION_IRQCHIP

arch/arm/mach-mvebu/coherency.h

@@ -14,6 +14,7 @@
 #ifndef __MACH_370_XP_COHERENCY_H
 #define __MACH_370_XP_COHERENCY_H
 
+extern void __iomem *coherency_base;	/* for coherency_ll.S */
 extern unsigned long coherency_phys_base;
 int set_cpu_coherent(void);
 

arch/arm/mach-mvebu/cpu-reset.c

@@ -16,6 +16,8 @@
 #include <linux/io.h>
 #include <linux/resource.h>
 
+#include "common.h"
+
 static void __iomem *cpu_reset_base;
 static size_t cpu_reset_size;
 

arch/arm/mach-mvebu/kirkwood-pm.c

@@ -18,6 +18,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 #include "kirkwood.h"
+#include "kirkwood-pm.h"
 
 static void __iomem *ddr_operation_base;
 static void __iomem *memory_pm_ctrl;
@@ -66,11 +67,10 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = {
 	.valid = kirkwood_pm_valid_standby,
 };
 
-int __init kirkwood_pm_init(void)
+void __init kirkwood_pm_init(void)
 {
 	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
 	memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
 
 	suspend_set_ops(&kirkwood_suspend_ops);
-	return 0;
 }

arch/arm/mach-mvebu/kirkwood.c

@@ -150,7 +150,7 @@ static void __init kirkwood_dt_eth_fixup(void)
  * causes mbus errors (which can occur for example for PCI aborts) to
  * throw CPU aborts, which we're not set up to deal with.
  */
-void kirkwood_disable_mbus_error_propagation(void)
+static void kirkwood_disable_mbus_error_propagation(void)
 {
 	void __iomem *cpu_config;
 

arch/arm/mach-mvebu/pm.c

@@ -23,6 +23,7 @@
 #include <asm/suspend.h>
 
 #include "coherency.h"
+#include "common.h"
 #include "pmsu.h"
 
 #define SDRAM_CONFIG_OFFS                  0x0

arch/arm/mach-mvebu/pmsu.c

@@ -25,6 +25,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/mbus.h>
+#include <linux/mvebu-pmsu.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -38,7 +39,7 @@
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 #include "common.h"
-
+#include "pmsu.h"
 
 #define PMSU_BASE_OFFSET    0x100
 #define PMSU_REG_SIZE	    0x1000

arch/arm/mach-mvebu/system-controller.c

@@ -127,7 +127,7 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev)
 }
 
 #if defined(CONFIG_SMP) && defined(CONFIG_MACH_MVEBU_V7)
-void mvebu_armada375_smp_wa_init(void)
+static void mvebu_armada375_smp_wa_init(void)
 {
 	u32 dev, rev;
 	phys_addr_t resume_addr_reg;

arch/arm/mach-mxs/Kconfig

@@ -15,7 +15,7 @@ config SOC_IMX28
 config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select MXS_TIMER
 	select PINCTRL
 	select SOC_BUS

arch/arm/mach-nomadik/Kconfig

 menuconfig ARCH_NOMADIK
 	bool "ST-Ericsson Nomadik"
 	depends on ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_NOMADIK_MTU
 	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	select CPU_ARM926T
+	select GPIOLIB
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK

arch/arm/mach-omap2/Kconfig

@@ -92,9 +92,9 @@ config ARCH_OMAP2PLUS
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON

arch/arm/mach-orion5x/Kconfig

 menuconfig ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU && ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY

arch/arm/mach-orion5x/irq.c

@@ -26,7 +26,7 @@ static int __initdata gpio0_irqs[4] = {
 	IRQ_ORION5X_GPIO_24_31,
 };
 
-asmlinkage void
+static asmlinkage void
 __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
 {
 	u32 stat;

arch/arm/mach-oxnas/Kconfig

 menuconfig ARCH_OXNAS
 	bool "Oxford Semiconductor OXNAS Family SoCs"
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_RESET_CONTROLLER
+	select GPIOLIB
 	select PINCTRL
 	depends on ARCH_MULTI_V5
 	help

arch/arm/mach-picoxcell/Kconfig

 config ARCH_PICOXCELL
 	bool "Picochip PicoXcell"
 	depends on ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select DW_APB_TIMER_OF
+	select GPIOLIB
 	select HAVE_TCM
 	select NO_IOPORT_MAP

arch/arm/mach-prima2/Kconfig

@@ -3,8 +3,8 @@ menuconfig ARCH_SIRF
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select REGMAP
 	select PINCTRL

arch/arm/mach-rockchip/Kconfig

@@ -4,10 +4,10 @@ config ARCH_ROCKCHIP
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
+	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP

arch/arm/mach-s3c24xx/Kconfig

@@ -11,7 +11,7 @@ if ARCH_S3C24XX
 
 config PLAT_S3C24XX
 	def_bool y
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
 	select IRQ_DOMAIN

arch/arm/mach-s3c24xx/include/mach/regs-gpio.h

@@ -520,7 +520,7 @@
 #define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
 
-/* interrupt filtering conrrol for EINT16..EINT23 */
+/* interrupt filtering control for EINT16..EINT23 */
 #define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
 #define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)

arch/arm/mach-s3c24xx/iotiming-s3c2410.c

@@ -423,7 +423,7 @@ void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
  * @timings: The IO timing information to fill out.
  *
  * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configur
+ * information in @cfg, and the new frequency configuration
  * through all the IO banks, reading the state and then updating @iot
  * as necessary.
  *

arch/arm/mach-s3c24xx/mach-n30.c

@@ -522,7 +522,7 @@ static void __init n30_hwinit(void)
 	 *
 	 * The pull ups for H6/H7 are enabled on N30 but not on the
 	 * N35/PiN.  I suppose is useful for a budget model of the N30
-	 * with no bluetooh.  It doesn't hurt to have the pull ups
+	 * with no bluetooth.  It doesn't hurt to have the pull ups
 	 * enabled on the N35, so leave them enabled for all models.
 	 */
 	__raw_writel(0x0028aaaa, S3C2410_GPHCON);

arch/arm/mach-s3c24xx/mach-osiris-dvs.c

@@ -143,7 +143,7 @@ static int osiris_dvs_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+/* the CONFIG_PM block is so small, it isn't worth actually compiling it
  * out if the configuration isn't set. */
 
 static int osiris_dvs_suspend(struct device *dev)

arch/arm/mach-s3c24xx/pll-s3c2410.c

@@ -32,11 +32,12 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table pll_vals_12MHz[] = {
     { .frequency = 34000000,  .driver_data = PLLVAL(82, 2, 3),   },
     { .frequency = 45000000,  .driver_data = PLLVAL(82, 1, 3),   },
-    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
     { .frequency = 48000000,  .driver_data = PLLVAL(120, 2, 3),  },
+    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
     { .frequency = 56000000,  .driver_data = PLLVAL(142, 2, 3),  },
     { .frequency = 68000000,  .driver_data = PLLVAL(82, 2, 2),   },
     { .frequency = 79000000,  .driver_data = PLLVAL(71, 1, 2),   },

arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c

@@ -20,6 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table s3c2440_plls_12[] = {
 	{ .frequency = 75000000,	.driver_data = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
 	{ .frequency = 80000000,	.driver_data = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */

arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c

@@ -20,6 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
 	{ .frequency = 78019200,	.driver_data = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
 	{ .frequency = 84067200,	.driver_data = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */

arch/arm/mach-s3c64xx/Kconfig

@@ -5,12 +5,12 @@
 menuconfig ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	depends on ARCH_MULTI_V6
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
 	select GPIO_SAMSUNG if ATAGS
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM

arch/arm/mach-s3c64xx/common.h

@@ -24,6 +24,7 @@ void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
 void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
 
+struct device_node;
 void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
 	unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
 void s3c64xx_set_xtal_freq(unsigned long freq);

arch/arm/mach-s3c64xx/include/mach/map.h

@@ -99,7 +99,7 @@
 
 #define S3C64XX_PA_USB_HSPHY	(0x7C100000)
 
-/* compatibiltiy defines. */
+/* compatibility defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
 #define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
 #define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1

arch/arm/mach-s5pv210/Kconfig

@@ -11,10 +11,10 @@ config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
+	select GPIOLIB
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS

arch/arm/mach-shmobile/Kconfig

@@ -41,7 +41,7 @@ menuconfig ARCH_RENESAS
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select NO_IOPORT_MAP
 	select PINCTRL
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ZONE_DMA if ARM_LPAE
 
 if ARCH_RENESAS

arch/arm/mach-spear/Kconfig

@@ -5,9 +5,9 @@
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family"
 	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
+	select GPIOLIB
 
 if PLAT_SPEAR
 

arch/arm/mach-sti/Kconfig

@@ -10,7 +10,7 @@ menuconfig ARCH_STI
 	select MFD_SYSCON
 	select ARCH_HAS_RESET_CONTROLLER
 	select HAVE_ARM_SCU if SMP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420

arch/arm/mach-sunxi/Kconfig

 menuconfig ARCH_SUNXI
 	bool "Allwinner SoCs"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select GPIOLIB
 	select PINCTRL
 	select SUN4I_TIMER
 	select RESET_CONTROLLER

arch/arm/mach-tegra/Kconfig

 menuconfig ARCH_TEGRA
 	bool "NVIDIA Tegra"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_AMBA
 	select ARM_GIC
 	select CLKSRC_MMIO
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL

arch/arm/mach-tegra/common.h

+/*
+ * Copyright (c) 2011, ARM Ltd.
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_COMMON_H
+#define __MACH_TEGRA_COMMON_H
+
 extern const struct smp_operations tegra_smp_ops;
 
 extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
+
+#endif

arch/arm/mach-tegra/cpuidle-tegra114.c

@@ -26,6 +26,7 @@
 #include <asm/suspend.h>
 #include <asm/psci.h>
 
+#include "cpuidle.h"
 #include "pm.h"
 #include "sleep.h"
 

arch/arm/mach-tegra/cpuidle-tegra20.c

@@ -30,6 +30,7 @@
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 
+#include "cpuidle.h"
 #include "flowctrl.h"
 #include "iomap.h"
 #include "irq.h"

arch/arm/mach-tegra/cpuidle-tegra30.c

@@ -30,6 +30,7 @@
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 
+#include "cpuidle.h"
 #include "pm.h"
 #include "sleep.h"
 

arch/arm/mach-tegra/cpuidle.h

@@ -23,8 +23,10 @@ void tegra20_cpuidle_pcie_irqs_in_use(void);
 int tegra30_cpuidle_init(void);
 int tegra114_cpuidle_init(void);
 void tegra_cpuidle_init(void);
+void tegra_cpuidle_pcie_irqs_in_use(void);
 #else
 static inline void tegra_cpuidle_init(void) {}
+static inline void tegra_cpuidle_pcie_irqs_in_use(void) {}
 #endif
 
 #endif

arch/arm/mach-tegra/hotplug.c

@@ -17,6 +17,7 @@
 
 #include <asm/smp_plat.h>
 
+#include "common.h"
 #include "sleep.h"
 
 static void (*tegra_hotplug_shutdown)(void);

arch/arm/mach-tegra/irq.c

@@ -29,6 +29,7 @@
 
 #include "board.h"
 #include "iomap.h"
+#include "irq.h"
 
 #define SGI_MASK 0xFFFF
 

arch/arm/mach-tegra/pm.h

@@ -36,7 +36,7 @@ void tegra30_sleep_core_init(void);
 
 void tegra_clear_cpu_in_lp2(void);
 bool tegra_set_cpu_in_lp2(void);
-
+int tegra_cpu_do_idle(void);
 void tegra_idle_lp2_last(void);
 extern void (*tegra_tear_down_cpu)(void);
 

arch/arm/mach-tegra/tegra.c

@@ -118,32 +118,14 @@ static void __init tegra_dt_init(void)
 	of_platform_default_populate(NULL, NULL, parent);
 }
 
-static void __init paz00_init(void)
-{
-	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
-		tegra_paz00_wifikill_init();
-}
-
-static struct {
-	char *machine;
-	void (*init)(void);
-} board_init_funcs[] = {
-	{ "compal,paz00", paz00_init },
-};
-
 static void __init tegra_dt_init_late(void)
 {
-	int i;
-
 	tegra_init_suspend();
 	tegra_cpuidle_init();
 
-	for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
-		if (of_machine_is_compatible(board_init_funcs[i].machine)) {
-			board_init_funcs[i].init();
-			break;
-		}
-	}
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
+	    of_machine_is_compatible("compal,paz00"))
+		tegra_paz00_wifikill_init();
 }
 
 static const char * const tegra_dt_board_compat[] = {

arch/arm/mach-u300/Kconfig

 menuconfig ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on ARCH_MULTI_V5 && MMU
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
 	select U300_TIMER
 	select CPU_ARM926T
+	select GPIOLIB
 	select HAVE_TCM
 	select PINCTRL
 	select PINCTRL_COH901

arch/arm/mach-uniphier/platsmp.c

@@ -101,20 +101,12 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
 	np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
 	ret = of_address_to_resource(np, 0, &res);
 	of_node_put(np);
-	if (!ret) {
-		rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
-	} else {
-		/* try old binding too */
-		np = of_find_compatible_node(NULL, NULL,
-					     "socionext,uniphier-system-bus-controller");
-		ret = of_address_to_resource(np, 1, &res);
-		of_node_put(np);
 	if (ret) {
 		pr_err("failed to get resource of SMP control\n");
 		return ret;
 	}
-		rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2;
-	}
+
+	rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
 
 	ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
 	if (ret)

arch/arm/mach-ux500/Kconfig

@@ -3,13 +3,13 @@ menuconfig ARCH_U8500
 	depends on ARCH_MULTI_V7 && MMU
 	select AB8500_CORE
 	select ABX500_CORE
-	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL

arch/arm/mach-vexpress/Kconfig

 menuconfig ARCH_VEXPRESS
 	bool "ARM Ltd. Versatile Express family"
 	depends on ARCH_MULTI_V7
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select ARM_TIMER_SP804
 	select COMMON_CLK_VERSATILE
+	select GPIOLIB
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM

arch/arm/mach-vexpress/hotplug.c

@@ -15,6 +15,8 @@
 #include <asm/smp_plat.h>
 #include <asm/cp15.h>
 
+#include "core.h"
+
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;

arch/arm/mach-vexpress/spc.c

@@ -31,6 +31,8 @@
 
 #include <asm/cacheflush.h>
 
+#include "spc.h"
+
 #define SPCLOG "vexpress-spc: "
 
 #define PERF_LVL_A15		0x00
@@ -319,17 +321,15 @@ static int ve_spc_waitforcompletion(int req_type)
 
 static int ve_spc_set_performance(int cluster, u32 freq)
 {
-	u32 perf_cfg_reg, perf_stat_reg;
+	u32 perf_cfg_reg;
 	int ret, perf, req_type;
 
 	if (cluster_is_a15(cluster)) {
 		req_type = CA15_DVFS;
 		perf_cfg_reg = PERF_LVL_A15;
-		perf_stat_reg = PERF_REQ_A15;
 	} else {
 		req_type = CA7_DVFS;
 		perf_cfg_reg = PERF_LVL_A7;
-		perf_stat_reg = PERF_REQ_A7;
 	}
 
 	perf = ve_spc_find_performance_index(cluster, freq);

arch/arm/mach-vt8500/Kconfig

 config ARCH_VT8500
 	bool
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select CLKDEV_LOOKUP
 	select VT8500_TIMER
 	select PINCTRL

arch/arm/plat-samsung/include/plat/cpu-freq-core.h

@@ -39,7 +39,7 @@ struct s3c2410_iobank_timing {
 	unsigned int	tacs;
 	unsigned int	tcos;
 	unsigned int	tacc;
-	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcoh;		/* nCS hold after nOE/nWE */
 	unsigned int	tcah;		/* Address hold after nCS */
 	unsigned char	nwait_en;	/* nWait enabled for bank. */
 };

arch/arm/plat-samsung/include/plat/fb-s3c2410.h

@@ -48,7 +48,7 @@ struct s3c2410fb_display {
 
 struct s3c2410fb_mach_info {
 
-	struct s3c2410fb_display *displays;	/* attached diplays info */
+	struct s3c2410fb_display *displays;	/* attached displays info */
 	unsigned num_displays;			/* number of defined displays */
 	unsigned default_display;
 

arch/arm/plat-samsung/include/plat/gpio-cfg.h

@@ -35,7 +35,7 @@ struct samsung_gpio_chip;
  * struct samsung_gpio_cfg GPIO configuration
  * @cfg_eint: Configuration setting when used for external interrupt source
  * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_pull: Set the current pull configuration for the GPIO
  * @set_config: Set the current configuration for the GPIO
  * @get_config: Read the current configuration for the GPIO
  *

arch/arm/plat-samsung/pm-check.c

@@ -5,7 +5,7 @@
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ * S3C Power Mangament - suspend/resume memory corruption check.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/plat-samsung/watchdog-reset.c

@@ -3,7 +3,7 @@
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Coyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
  * Watchdog reset support for Samsung SoCs.
  *

arch/arm/plat-versatile/platsmp.c

@@ -18,6 +18,8 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
+#include <plat/platsmp.h>
+
 /*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency

drivers/bus/mvebu-mbus.c

@@ -117,7 +117,7 @@ struct mvebu_mbus_soc_data {
 	unsigned int (*win_remap_offset)(const int win);
 	void (*setup_cpu_target)(struct mvebu_mbus_state *s);
 	int (*save_cpu_target)(struct mvebu_mbus_state *s,
-			       u32 *store_addr);
+			       u32 __iomem *store_addr);
 	int (*show_cpu_target)(struct mvebu_mbus_state *s,
 			       struct seq_file *seq, void *v);
 };
@@ -728,7 +728,7 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
 
 static int
 mvebu_mbus_default_save_cpu_target(struct mvebu_mbus_state *mbus,
-				   u32 *store_addr)
+				   u32 __iomem *store_addr)
 {
 	int i;
 
@@ -780,7 +780,7 @@ mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
 
 static int
 mvebu_mbus_dove_save_cpu_target(struct mvebu_mbus_state *mbus,
-				u32 *store_addr)
+				u32 __iomem *store_addr)
 {
 	int i;
 
@@ -796,7 +796,7 @@ mvebu_mbus_dove_save_cpu_target(struct mvebu_mbus_state *mbus,
 	return 4;
 }
 
-int mvebu_mbus_save_cpu_target(u32 *store_addr)
+int mvebu_mbus_save_cpu_target(u32 __iomem *store_addr)
 {
 	return mbus_state.soc->save_cpu_target(&mbus_state, store_addr);
 }
@@ -1089,7 +1089,7 @@ static void mvebu_mbus_resume(void)
 	}
 }
 
-struct syscore_ops mvebu_mbus_syscore_ops = {
+static struct syscore_ops mvebu_mbus_syscore_ops = {
 	.suspend	= mvebu_mbus_suspend,
 	.resume		= mvebu_mbus_resume,
 };

drivers/power/reset/vexpress-poweroff.c

@@ -74,7 +74,7 @@ static ssize_t vexpress_reset_active_store(struct device *dev,
 	return err ? err : count;
 }
 
-DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show,
+static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show,
 		   vexpress_reset_active_store);
 
 

include/linux/mbus.h

@@ -66,7 +66,7 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(vo
 }
 #endif
 
-int mvebu_mbus_save_cpu_target(u32 *store_addr);
+int mvebu_mbus_save_cpu_target(u32 __iomem *store_addr);
 void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
 void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
 int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr);