Skip to content

L
linux
Commit 70876fac authored by Paul Mundt's avatar Paul Mundt
Browse files
Options

Merge branch 'x3'

parents b2309d68 2b1bd1ac
Hide whitespace changes
Inline Side-by-side
Showing with 1092 additions and 35 deletions
arch/sh/Kconfig
View file @ 70876fac
......@@ -554,6 +554,7 @@ config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
default "4" if CPU_SHX3
default "2"
help
This allows you to specify the maximum number of CPUs which this
......
arch/sh/configs/shx3_defconfig 0 → 100644
View file @ 70876fac
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22-rc4
# Wed Jun 20 14:09:27 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_UTS_NS is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
#
# System type
#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
CONFIG_CPU_SUBTYPE_SHX3=y
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_SH_FPU is not set
# CONFIG_SH_FPU_EMU is not set
CONFIG_SH_DSP=y
CONFIG_SH_STORE_QUEUES=y
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_INTC2_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
#
# Board support
#
#
# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=50000000
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# DMA support
#
# CONFIG_SH_DMA is not set
#
# Companion Chips
#
#
# Additional SuperH Device Drivers
#
CONFIG_HEARTBEAT=y
# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel"
#
# Bus options
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
# CONFIG_NET is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
#
# Misc devices
#
# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_PATA_PLATFORM=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# ISDN subsystem
#
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#
# CONFIG_HID is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_4KSTACKS is not set
# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/sh/kernel/cpu/irq/intc2.c
View file @ 70876fac
......@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/smp.h>
static inline struct intc2_desc *get_intc2_desc(unsigned int irq)
{
......@@ -24,14 +25,18 @@ static void disable_intc2_irq(unsigned int irq)
{
struct intc2_data *p = get_irq_chip_data(irq);
struct intc2_desc *d = get_intc2_desc(irq);
ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset);
ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset +
(hard_smp_processor_id() * 4));
}
static void enable_intc2_irq(unsigned int irq)
{
struct intc2_data *p = get_irq_chip_data(irq);
struct intc2_desc *d = get_intc2_desc(irq);
ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset);
ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset +
(hard_smp_processor_id() * 4));
}
/*
......
arch/sh/kernel/cpu/sh3/entry.S
View file @ 70876fac
......@@ -340,8 +340,27 @@ ENTRY(vbr_base)
general_exception:
mov.l 1f, k2
mov.l 2f, k3
#ifdef CONFIG_CPU_SUBTYPE_SHX3
mov.l @k2, k2
! Is EXPEVT larger than 0x800?
mov #0x8, k0
shll8 k0
cmp/hs k0, k2
bf 0f
! then add 0x580 (k2 is 0xd80 or 0xda0)
mov #0x58, k0
shll2 k0
shll2 k0
add k0, k2
0:
bra handle_exception
nop
#else
bra handle_exception
mov.l @k2, k2
#endif
.align 2
1: .long EXPEVT
2: .long ret_from_exception
......
arch/sh/kernel/cpu/sh4/probe.c
View file @ 70876fac
......@@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void)
current_cpu_data.flags |= CPU_HAS_LLSC;
}
break;
case 0x4000: /* 1st cut */
case 0x4001: /* 2nd cut */
current_cpu_data.type = CPU_SHX3;
current_cpu_data.icache.ways = 4;
current_cpu_data.dcache.ways = 4;
current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
CPU_HAS_LLSC;
break;
case 0x8000:
current_cpu_data.type = CPU_ST40RA;
current_cpu_data.flags |= CPU_HAS_FPU;
......
arch/sh/kernel/cpu/sh4a/Makefile
View file @ 70876fac
......@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
......@@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
obj-y += $(clock-y)
arch/sh/kernel/cpu/sh4a/clock-shx3.c 0 → 100644
View file @ 70876fac
/*
* arch/sh/kernel/cpu/sh4/clock-shx3.c
*
* SH-X3 support for the clock framework
*
* Copyright (C) 2006-2007 Renesas Technology Corp.
* Copyright (C) 2006-2007 Renesas Solutions Corp.
* Copyright (C) 2006-2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/clock.h>
#include <asm/freq.h>
#include <asm/io.h>
static int ifc_divisors[] = { 1, 2, 4 ,6 };
static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 };
static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 };
static int cfc_divisors[] = { 1, 1, 4, 6 };
#define IFC_POS 28
#define IFC_MSK 0x0003
#define BFC_MSK 0x000f
#define PFC_MSK 0x000f
#define CFC_MSK 0x0003
#define BFC_POS 16
#define PFC_POS 0
#define CFC_POS 20
static void master_clk_init(struct clk *clk)
{
clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK];
}
static struct clk_ops shx3_master_clk_ops = {
.init = master_clk_init,
};
static void module_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
clk->rate = clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops shx3_module_clk_ops = {
.recalc = module_clk_recalc,
};
static void bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
clk->rate = clk->parent->rate / bfc_divisors[idx];
}
static struct clk_ops shx3_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
static void cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
clk->rate = clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops shx3_cpu_clk_ops = {
.recalc = cpu_clk_recalc,
};
static struct clk_ops *shx3_clk_ops[] = {
&shx3_master_clk_ops,
&shx3_module_clk_ops,
&shx3_bus_clk_ops,
&shx3_cpu_clk_ops,
};
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
if (idx < ARRAY_SIZE(shx3_clk_ops))
*ops = shx3_clk_ops[idx];
}
static void shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
clk->rate = clk->parent->rate / cfc_divisors[idx];
}
static struct clk_ops shx3_shyway_clk_ops = {
.recalc = shyway_clk_recalc,
};
static struct clk shx3_shyway_clk = {
.name = "shyway_clk",
.flags = CLK_ALWAYS_ENABLED,
.ops = &shx3_shyway_clk_ops,
};
/*
* Additional SHx3-specific on-chip clocks that aren't already part of the
* clock framework
*/
static struct clk *shx3_onchip_clocks[] = {
&shx3_shyway_clk,
};
static int __init shx3_clk_init(void)
{
struct clk *clk = clk_get(NULL, "master_clk");
int i;
for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) {
struct clk *clkp = shx3_onchip_clocks[i];
clkp->parent = clk;
clk_register(clkp);
clk_enable(clkp);
}
/*
* Now that we have the rest of the clocks registered, we need to
* force the parent clock to propagate so that these clocks will
* automatically figure out their rate. We cheat by handing the
* parent clock its current rate and forcing child propagation.
*/
clk_set_rate(clk, clk_get_rate(clk));
clk_put(clk);
return 0;
}
arch_initcall(shx3_clk_init);
arch/sh/kernel/cpu/sh4a/setup-shx3.c 0 → 100644
View file @ 70876fac
/*
* SH-X3 Setup
*
* Copyright (C) 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/io.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffc30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 40, 41, 43, 42 },
}, {
.mapbase = 0xffc40000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 44, 45, 47, 46 },
}, {
.mapbase = 0xffc50000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 48, 49, 51, 50 },
}, {
.mapbase = 0xffc60000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 52, 53, 55, 54 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *shx3_devices[] __initdata = {
&sci_device,
};
static int __init shx3_devices_setup(void)
{
return platform_add_devices(shx3_devices,
ARRAY_SIZE(shx3_devices));
}
__initcall(shx3_devices_setup);
static struct intc2_data intc2_irq_table[] = {
{ 16, 0, 0, 0, 1, 2 }, /* TMU0 */
{ 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */
{ 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */
{ 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */
{ 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */
};
static struct intc2_desc intc2_irq_desc __read_mostly = {
.prio_base = 0xfe410000,
.msk_base = 0xfe410820,
.mskclr_base = 0xfe410850,
.intc2_data = intc2_irq_table,
.nr_irqs = ARRAY_SIZE(intc2_irq_table),
.chip = {
.name = "INTC2-SHX3",
},
};
void __init init_IRQ_intc2(void)
{
register_intc2_controller(&intc2_irq_desc);
}
arch/sh/kernel/setup.c
View file @ 70876fac
......@@ -285,7 +285,7 @@ static const char *cpu_name[] = {
[CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780",
[CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343",
[CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722",
[CPU_SH_NONE] = "Unknown"
[CPU_SHX3] = "SH-X3", [CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)
......
arch/sh/kernel/timers/timer-tmu.c
View file @ 70876fac
......@@ -30,7 +30,7 @@
static int tmu_timer_start(void)
{
ctrl_outb(ctrl_inb(TMU_TSTR) | 0x3, TMU_TSTR);
ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR);
return 0;
}
......@@ -52,7 +52,7 @@ static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload)
static int tmu_timer_stop(void)
{
ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x3, TMU_TSTR);
ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR);
return 0;
}
......@@ -174,7 +174,8 @@ static int tmu_timer_init(void)
#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
!defined(CONFIG_CPU_SUBTYPE_SH7760) && \
!defined(CONFIG_CPU_SUBTYPE_SH7785)
!defined(CONFIG_CPU_SUBTYPE_SH7785) && \
!defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#endif
......
arch/sh/mm/Kconfig
View file @ 70876fac
......@@ -36,6 +36,9 @@ config CPU_SUBTYPE_ST40
config CPU_SHX2
bool
config CPU_SHX3
bool
choice
prompt "Processor sub-type selection"
......@@ -193,6 +196,12 @@ config CPU_SUBTYPE_SH7785
select CPU_SHX2
select CPU_HAS_INTC2_IRQ
config CPU_SUBTYPE_SHX3
bool "Support SH-X3 processor"
select CPU_SH4A
select CPU_SHX3
select CPU_HAS_INTC2_IRQ
# SH4AL-DSP Processor Support
config CPU_SUBTYPE_SH73180
......
drivers/serial/sh-sci.c
View file @ 70876fac
......@@ -367,7 +367,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
} else {
#ifdef CONFIG_CPU_SUBTYPE_SH7343
/* Nothing */
#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
......
drivers/serial/sh-sci.h
View file @ 70876fac
......@@ -78,7 +78,7 @@
# define SCPDR 0xA4050136 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCI_NPORTS 2
# define SCIF_ORER 0x0001 /* overrun error bit */
......@@ -173,6 +173,14 @@
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
# define SCSPTR0 0xffc30020 /* 16 bit SCIF */
# define SCSPTR1 0xffc40020 /* 16 bit SCIF */
# define SCSPTR2 0xffc50020 /* 16 bit SCIF */
# define SCSPTR3 0xffc60020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#else
# error CPU subtype not defined
#endif
......@@ -189,7 +197,8 @@
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
#else
#define SCI_CTRL_FLAGS_REIE 0
......@@ -666,6 +675,18 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffc30000)
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffc40000)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffc50000)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffc60000)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
}
#endif
/*
......
include/asm-sh/bugs.h
View file @ 70876fac
......@@ -35,7 +35,7 @@ static void __init check_bugs(void)
case CPU_SH7750 ... CPU_SH4_501:
*p++ = '4';
break;
case CPU_SH7770 ... CPU_SH7785:
case CPU_SH7770 ... CPU_SHX3:
*p++ = '4';
*p++ = 'a';
break;
......
include/asm-sh/cpu-sh4/freq.h
View file @ 70876fac
......@@ -22,6 +22,8 @@
#define FRQCR0 0xffc80000
#define FRQCR1 0xffc80004
#define FRQMR1 0xffc80014
#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
#define FRQCR 0xffc00014
#else
#define FRQCR 0xffc00000
#define FRQCR_PSTBY 0x0200
......
include/asm-sh/cpu-sh4/timer.h
View file @ 70876fac
/*
* include/asm-sh/cpu-sh4/timer.h
*
* Copyright (C) 2004 Lineo Solutions, Inc.
* Copyright (C) 2004 Lineo Solutions, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
......@@ -16,36 +16,45 @@
* SH7750S/SH7750R
* SH7751/SH7751R
* SH7760
* SH-X3
* ---------------------------------------------------------------------------
*/
#if !defined(CONFIG_CPU_SUBTYPE_SH7760)
#define TMU_TOCR 0xffd80000 /* Byte access */
#ifdef CONFIG_CPU_SUBTYPE_SHX3
#define TMU_012_BASE 0xffc10000
#define TMU_345_BASE 0xffc20000
#else
#define TMU_012_BASE 0xffd80000
#define TMU_345_BASE 0xfe100000
#endif
#define TMU_TSTR 0xffd80004 /* Byte access */
#define TMU0_TCOR 0xffd80008 /* Long access */
#define TMU0_TCNT 0xffd8000c /* Long access */
#define TMU0_TCR 0xffd80010 /* Word access */
#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */
#define TMU1_TCOR 0xffd80014 /* Long access */
#define TMU1_TCNT 0xffd80018 /* Long access */
#define TMU1_TCR 0xffd8001c /* Word access */
#define TMU_012_TSTR (TMU_012_BASE + 0x04)
#define TMU_345_TSTR (TMU_345_BASE + 0x04)
#define TMU2_TCOR 0xffd80020 /* Long access */
#define TMU2_TCNT 0xffd80024 /* Long access */
#define TMU2_TCR 0xffd80028 /* Word access */
#define TMU2_TCPR 0xffd8002c /* Long access */
#define TMU0_TCOR (TMU_012_BASE + 0x08)
#define TMU0_TCNT (TMU_012_BASE + 0x0c)
#define TMU0_TCR (TMU_012_BASE + 0x10)
#if !defined(CONFIG_CPU_SUBTYPE_SH7760)
#define TMU3_TCOR 0xfe100008 /* Long access */
#define TMU3_TCNT 0xfe10000c /* Long access */
#define TMU3_TCR 0xfe100010 /* Word access */
#define TMU1_TCOR (TMU_012_BASE + 0x14)
#define TMU1_TCNT (TMU_012_BASE + 0x18)
#define TMU1_TCR (TMU_012_BASE + 0x1c)
#define TMU4_TCOR 0xfe100014 /* Long access */
#define TMU4_TCNT 0xfe100018 /* Long access */
#define TMU4_TCR 0xfe10001c /* Word access */
#endif
#define TMU2_TCOR (TMU_012_BASE + 0x20)
#define TMU2_TCNT (TMU_012_BASE + 0x24)
#define TMU2_TCR (TMU_012_BASE + 0x28)
#define TMU2_TCPR (TMU_012_BASE + 0x2c)
#endif /* __ASM_CPU_SH4_TIMER_H */
#define TMU3_TCOR (TMU_345_BASE + 0x08)
#define TMU3_TCNT (TMU_345_BASE + 0x0c)
#define TMU3_TCR (TMU_345_BASE + 0x10)
#define TMU4_TCOR (TMU_345_BASE + 0x14)
#define TMU4_TCNT (TMU_345_BASE + 0x18)
#define TMU4_TCR (TMU_345_BASE + 0x1c)
#define TMU5_TCOR (TMU_345_BASE + 0x20)
#define TMU5_TCNT (TMU_345_BASE + 0x24)
#define TMU5_TCR (TMU_345_BASE + 0x28)
#endif /* __ASM_CPU_SH4_TIMER_H */
include/asm-sh/processor.h
View file @ 70876fac
......@@ -52,7 +52,7 @@ enum cpu_type {
CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
/* SH-4A types */
CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
/* SH4AL-DSP types */
CPU_SH73180, CPU_SH7343, CPU_SH7722,
......
include/asm-sh/smp.h
View file @ 70876fac
......@@ -39,4 +39,6 @@ extern struct smp_fn_call_struct smp_fn_call;
#endif /* CONFIG_SMP */
#define hard_smp_processor_id() (0)
#endif /* __ASM_SH_SMP_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7