Commit 727dda80 authored by Greg Ungerer's avatar Greg Ungerer Committed by Linus Torvalds

[PATCH] m68knommu: fix compilation problems with 68328serial driver

Clean out the 68328serial driver:

. remove use of cli/sti
. fix usage of tty_* calls
. remove unused variables
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 9a9bb6fb
......@@ -131,17 +131,6 @@ static int m68328_console_baud = CONSOLE_BAUD_RATE;
static int m68328_console_cbaud = DEFAULT_CBAUD;
/*
* tmp_buf is used as a temporary buffer by serial_write. We need to
* lock it in case the memcpy_fromfs blocks while swapping in a page,
* and some other program tries to do a serial write at the same time.
* Since the lock will only come under contention when the system is
* swapping and available memory is low, it makes sense to share one
* buffer across all the serial ports, since it significantly saves
* memory if large numbers of serial ports are open.
*/
static unsigned char tmp_buf[SERIAL_XMIT_SIZE]; /* This is cheating */
static inline int serial_paranoia_check(struct m68k_serial *info,
char *name, const char *routine)
{
......@@ -211,16 +200,16 @@ static void rs_stop(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_stop"))
return;
save_flags(flags); cli();
local_irq_save(flags);
uart->ustcnt &= ~USTCNT_TXEN;
restore_flags(flags);
local_irq_restore(flags);
}
static void rs_put_char(char ch)
{
int flags, loops = 0;
save_flags(flags); cli();
local_irq_save(flags);
while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) {
loops++;
......@@ -229,7 +218,7 @@ static void rs_put_char(char ch)
UTX_TXDATA = ch;
udelay(5);
restore_flags(flags);
local_irq_restore(flags);
}
static void rs_start(struct tty_struct *tty)
......@@ -241,7 +230,7 @@ static void rs_start(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_start"))
return;
save_flags(flags); cli();
local_irq_save(flags);
if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) {
#ifdef USE_INTS
uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
......@@ -249,7 +238,7 @@ static void rs_start(struct tty_struct *tty)
uart->ustcnt |= USTCNT_TXEN;
#endif
}
restore_flags(flags);
local_irq_restore(flags);
}
/* Drop into either the boot monitor or kadb upon receiving a break
......@@ -327,14 +316,6 @@ static void receive_chars(struct m68k_serial *info, struct pt_regs *regs,
if(!tty)
goto clear_and_exit;
/*
* Make sure that we do not overflow the buffer
*/
if (tty_request_buffer_room(tty, 1) == 0) {
tty_schedule_flip(tty);
return;
}
flag = TTY_NORMAL;
if(rx & URX_PARITY_ERROR) {
......@@ -473,7 +454,7 @@ static int startup(struct m68k_serial * info)
return -ENOMEM;
}
save_flags(flags); cli();
local_irq_save(flags);
/*
* Clear the FIFO buffers and disable them
......@@ -506,7 +487,7 @@ static int startup(struct m68k_serial * info)
change_speed(info);
info->flags |= S_INITIALIZED;
restore_flags(flags);
local_irq_restore(flags);
return 0;
}
......@@ -523,7 +504,7 @@ static void shutdown(struct m68k_serial * info)
if (!(info->flags & S_INITIALIZED))
return;
save_flags(flags); cli(); /* Disable interrupts */
local_irq_save(flags);
if (info->xmit_buf) {
free_page((unsigned long) info->xmit_buf);
......@@ -534,7 +515,7 @@ static void shutdown(struct m68k_serial * info)
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~S_INITIALIZED;
restore_flags(flags);
local_irq_restore(flags);
}
struct {
......@@ -655,24 +636,24 @@ static void rs_fair_output(void)
if (info == 0) return;
if (info->xmit_buf == 0) return;
save_flags(flags); cli();
local_irq_save(flags);
left = info->xmit_cnt;
while (left != 0) {
c = info->xmit_buf[info->xmit_tail];
info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt--;
restore_flags(flags);
local_irq_restore(flags);
rs_put_char(c);
save_flags(flags); cli();
local_irq_save(flags);
left = min(info->xmit_cnt, left-1);
}
/* Last character is being transmitted now (hopefully). */
udelay(5);
restore_flags(flags);
local_irq_restore(flags);
return;
}
......@@ -720,11 +701,11 @@ static void rs_flush_chars(struct tty_struct *tty)
#endif
/* Enable transmitter */
save_flags(flags); cli();
local_irq_save(flags);
if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
!info->xmit_buf) {
restore_flags(flags);
local_irq_restore(flags);
return;
}
......@@ -749,7 +730,7 @@ static void rs_flush_chars(struct tty_struct *tty)
while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
}
#endif
restore_flags(flags);
local_irq_restore(flags);
}
extern void console_printn(const char * b, int count);
......@@ -768,18 +749,22 @@ static int rs_write(struct tty_struct * tty,
if (!tty || !info->xmit_buf)
return 0;
save_flags(flags);
local_save_flags(flags);
while (1) {
cli();
local_irq_disable();
c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
local_irq_restore(flags);
if (c <= 0)
break;
memcpy(info->xmit_buf + info->xmit_head, buf, c);
local_irq_disable();
info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
info->xmit_cnt += c;
restore_flags(flags);
local_irq_restore(flags);
buf += c;
count -= c;
total += c;
......@@ -787,7 +772,7 @@ static int rs_write(struct tty_struct * tty,
if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
/* Enable transmitter */
cli();
local_irq_disable();
#ifndef USE_INTS
while(info->xmit_cnt) {
#endif
......@@ -807,9 +792,9 @@ static int rs_write(struct tty_struct * tty,
#ifndef USE_INTS
}
#endif
restore_flags(flags);
local_irq_restore(flags);
}
restore_flags(flags);
return total;
}
......@@ -838,12 +823,13 @@ static int rs_chars_in_buffer(struct tty_struct *tty)
static void rs_flush_buffer(struct tty_struct *tty)
{
struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
return;
cli();
local_irq_save(flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
sti();
local_irq_restore(flags);
tty_wakeup(tty);
}
......@@ -973,14 +959,15 @@ static int get_lsr_info(struct m68k_serial * info, unsigned int *value)
m68328_uart *uart = &uart_addr[info->line];
#endif
unsigned char status;
unsigned long flags;
cli();
local_irq_save(flags);
#ifdef CONFIG_SERIAL_68328_RTS_CTS
status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0;
#else
status = 0;
#endif
sti();
local_irq_restore(flags);
put_user(status,value);
return 0;
}
......@@ -994,14 +981,13 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
unsigned long flags;
if (!info->port)
return;
save_flags(flags);
cli();
local_irq_save(flags);
#ifdef USE_INTS
uart->utx.w |= UTX_SEND_BREAK;
msleep_interruptible(duration);
uart->utx.w &= ~UTX_SEND_BREAK;
#endif
restore_flags(flags);
local_irq_restore(flags);
}
static int rs_ioctl(struct tty_struct *tty, struct file * file,
......@@ -1060,7 +1046,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
(struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
if (access_ok(VERIFY_WRITE, (void *) arg,
sizeof(unsigned int));
sizeof(unsigned int)))
return get_lsr_info(info, (unsigned int *) arg);
return -EFAULT;
case TIOCSERGSTRUCT:
......@@ -1113,10 +1099,10 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
return;
save_flags(flags); cli();
local_irq_save(flags);
if (tty_hung_up_p(filp)) {
restore_flags(flags);
local_irq_restore(flags);
return;
}
......@@ -1138,7 +1124,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
info->count = 0;
}
if (info->count) {
restore_flags(flags);
local_irq_restore(flags);
return;
}
info->flags |= S_CLOSING;
......@@ -1186,7 +1172,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
}
info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING);
wake_up_interruptible(&info->close_wait);
restore_flags(flags);
local_irq_restore(flags);
}
/*
......@@ -1262,9 +1248,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
info->count--;
info->blocked_open++;
while (1) {
cli();
local_irq_disable();
m68k_rtsdtr(info, 1);
sti();
local_irq_enable();
current->state = TASK_INTERRUPTIBLE;
if (tty_hung_up_p(filp) ||
!(info->flags & S_INITIALIZED)) {
......@@ -1444,7 +1430,7 @@ rs68328_init(void)
return -ENOMEM;
}
save_flags(flags); cli();
local_irq_save(flags);
for(i=0;i<NR_PORTS;i++) {
......@@ -1489,7 +1475,7 @@ rs68328_init(void)
serial_pm[i]->data = info;
#endif
}
restore_flags(flags);
local_irq_restore(flags);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment