Commit 72b6c893 authored by Martin Dalecki's avatar Martin Dalecki Committed by Linus Torvalds

[PATCH] 2.5.28 IDE 102

Just getting trivia out of the way, so the interresting parts
don't get burried by them:

- Sanitize the menu configuration system.

- Allow to compile atapi.c as a "foundation module" for the
   consuming device type drivers.
parent cc1d7840
...@@ -283,9 +283,9 @@ if [ "$CONFIG_NET" = "y" ]; then ...@@ -283,9 +283,9 @@ if [ "$CONFIG_NET" = "y" ]; then
fi fi
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -529,9 +529,9 @@ if [ "$CONFIG_NET" = "y" ]; then ...@@ -529,9 +529,9 @@ if [ "$CONFIG_NET" = "y" ]; then
fi fi
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -298,18 +298,10 @@ source drivers/pnp/Config.in ...@@ -298,18 +298,10 @@ source drivers/pnp/Config.in
source drivers/block/Config.in source drivers/block/Config.in
source drivers/md/Config.in
if [ "$CONFIG_NET" = "y" ]; then
source net/Config.in
fi
source drivers/telephony/Config.in
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL device support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL device support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
...@@ -319,15 +311,32 @@ fi ...@@ -319,15 +311,32 @@ fi
endmenu endmenu
mainmenu_option next_comment mainmenu_option next_comment
comment 'SCSI support' comment 'SCSI device support'
tristate 'SCSI support' CONFIG_SCSI tristate 'SCSI device support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then if [ "$CONFIG_SCSI" != "n" ]; then
source drivers/scsi/Config.in source drivers/scsi/Config.in
fi fi
endmenu endmenu
mainmenu_option next_comment
comment 'Old non-SCSI/ATAPI CD-ROM drives'
bool 'Support non-SCSI/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
source drivers/cdrom/Config.in
fi
endmenu
source drivers/md/Config.in
if [ "$CONFIG_NET" = "y" ]; then
source net/Config.in
fi
source drivers/telephony/Config.in
source drivers/message/fusion/Config.in source drivers/message/fusion/Config.in
source drivers/ieee1394/Config.in source drivers/ieee1394/Config.in
...@@ -354,15 +363,6 @@ source net/irda/Config.in ...@@ -354,15 +363,6 @@ source net/irda/Config.in
source drivers/isdn/Config.in source drivers/isdn/Config.in
mainmenu_option next_comment
comment 'Old CD-ROM drivers (not SCSI, not IDE)'
bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
source drivers/cdrom/Config.in
fi
endmenu
# #
# input before char - char/joystick depends on it. As does USB. # input before char - char/joystick depends on it. As does USB.
# #
......
...@@ -133,9 +133,9 @@ source drivers/md/Config.in ...@@ -133,9 +133,9 @@ source drivers/md/Config.in
source drivers/message/fusion/Config.in source drivers/message/fusion/Config.in
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -160,9 +160,9 @@ if [ "$CONFIG_MAC" = "y" ]; then ...@@ -160,9 +160,9 @@ if [ "$CONFIG_MAC" = "y" ]; then
fi fi
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL device support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL device support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
...@@ -172,9 +172,9 @@ fi ...@@ -172,9 +172,9 @@ fi
endmenu endmenu
mainmenu_option next_comment mainmenu_option next_comment
comment 'SCSI support' comment 'SCSI device support'
tristate 'SCSI support' CONFIG_SCSI tristate 'SCSI device support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then if [ "$CONFIG_SCSI" != "n" ]; then
......
...@@ -343,9 +343,9 @@ if [ "$CONFIG_SGI_IP22" != "y" -a \ ...@@ -343,9 +343,9 @@ if [ "$CONFIG_SGI_IP22" != "y" -a \
"$CONFIG_DECSTATION" != "y" ]; then "$CONFIG_DECSTATION" != "y" ]; then
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -138,9 +138,9 @@ fi ...@@ -138,9 +138,9 @@ fi
source drivers/telephony/Config.in source drivers/telephony/Config.in
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -92,9 +92,9 @@ if [ "$CONFIG_NET" = "y" ]; then ...@@ -92,9 +92,9 @@ if [ "$CONFIG_NET" = "y" ]; then
fi fi
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -211,9 +211,9 @@ if [ "$CONFIG_NET" = "y" ]; then ...@@ -211,9 +211,9 @@ if [ "$CONFIG_NET" = "y" ]; then
fi fi
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -104,9 +104,9 @@ fi ...@@ -104,9 +104,9 @@ fi
if [ "$CONFIG_PCI" = "y" ]; then if [ "$CONFIG_PCI" = "y" ]; then
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -105,9 +105,9 @@ if [ "$CONFIG_NET" = "y" ]; then ...@@ -105,9 +105,9 @@ if [ "$CONFIG_NET" = "y" ]; then
fi fi
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL device support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL device support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -126,9 +126,9 @@ fi ...@@ -126,9 +126,9 @@ fi
source drivers/telephony/Config.in source drivers/telephony/Config.in
mainmenu_option next_comment mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support' comment 'ATA/ATAPI/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in source drivers/ide/Config.in
......
...@@ -84,6 +84,16 @@ CONFIG_BLK_DEV_IDECS ...@@ -84,6 +84,16 @@ CONFIG_BLK_DEV_IDECS
Support for outboard IDE disks, tape drives, and CD-ROM drives Support for outboard IDE disks, tape drives, and CD-ROM drives
connected through a PCMCIA card. connected through a PCMCIA card.
CONFIG_ATAPI
If you wish to enable basic support for devices attached to the system
through the ATA interface, and which are using using the ATAPI protocol
(CD-ROM, CD-RW, DVD, DVD-RW, LS120, ZIP, ...), say Y.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called atapi.o.
CONFIG_BLK_DEV_IDECD CONFIG_BLK_DEV_IDECD
If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
a newer protocol used by IDE CD-ROM and TAPE drives, similar to the a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
......
# #
# IDE ATA ATAPI Block device driver configuration # ATA/ATAPI block device driver configuration
# #
# Andre Hedrick <andre@linux-ide.org> dep_tristate 'Enhanced ATA/ATAPI device (disk,cdrom,...) support' CONFIG_BLK_DEV_IDE $CONFIG_IDE
#
mainmenu_option next_comment
comment 'ATA and ATAPI Block devices'
dep_tristate 'Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support' CONFIG_BLK_DEV_IDE $CONFIG_IDE
comment 'Please see Documentation/ide.txt for help/info on IDE drives'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' Use old disk-only driver on primary interface' CONFIG_BLK_DEV_HD_IDE $CONFIG_X86 dep_bool ' Use old disk-only driver on primary interface' CONFIG_BLK_DEV_HD_IDE $CONFIG_X86
define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_IDE define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_IDE
dep_tristate ' Include IDE/ATA-2 DISK support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE dep_tristate ' ATA disk support' CONFIG_BLK_DEV_IDEDISK $CONFIG_BLK_DEV_IDE
dep_mbool ' Use multi-mode by default' CONFIG_IDEDISK_MULTI_MODE $CONFIG_BLK_DEV_IDEDISK dep_bool ' Use multi-mode by default' CONFIG_IDEDISK_MULTI_MODE $CONFIG_BLK_DEV_IDEDISK
dep_mbool ' Auto-Geometry Resizing support' CONFIG_IDEDISK_STROKE $CONFIG_BLK_DEV_IDEDISK dep_bool ' Auto-Geometry Resizing support' CONFIG_IDEDISK_STROKE $CONFIG_BLK_DEV_IDEDISK
dep_tristate ' PCMCIA IDE support' CONFIG_BLK_DEV_IDECS $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA
dep_tristate ' Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE dep_tristate ' ATAPI device support (CD-ROM, floppy)' CONFIG_ATAPI $CONFIG_BLK_DEV_IDE
dep_tristate ' Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE dep_tristate ' CD-ROM support' CONFIG_BLK_DEV_IDECD $CONFIG_ATAPI $CONFIG_BLK_DEV_IDE
dep_tristate ' Include IDE/ATAPI FLOPPY support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_BLK_DEV_IDE dep_tristate ' Tape support' CONFIG_BLK_DEV_IDETAPE $CONFIG_ATAPI $CONFIG_BLK_DEV_IDE
dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI dep_tristate ' Floppy support' CONFIG_BLK_DEV_IDEFLOPPY $CONFIG_ATAPI $CONFIG_BLK_DEV_IDE
dep_tristate ' SCSI emulation support' CONFIG_BLK_DEV_IDESCSI $CONFIG_ATAPI $CONFIG_BLK_DEV_IDE $CONFIG_SCSI
comment 'ATA host chip set support' dep_tristate ' PCMCIA/CardBus support' CONFIG_BLK_DEV_IDECS $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA
dep_bool ' CMD640 chip set bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
comment 'ATA host controller support'
dep_bool ' RZ1000 bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86
dep_bool ' CMD640 bugfix/support' CONFIG_BLK_DEV_CMD640 $CONFIG_X86
dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640 dep_bool ' CMD640 enhanced support' CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
dep_bool ' ISA-PNP support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP dep_bool ' ISA-PNP support' CONFIG_BLK_DEV_ISAPNP $CONFIG_ISAPNP
if [ "$CONFIG_PCI" = "y" ]; then if [ "$CONFIG_PCI" != "n" ]; then
dep_bool ' RZ1000 chip set bugfix/support' CONFIG_BLK_DEV_RZ1000 $CONFIG_X86 comment ' PCI host controller support'
comment ' PCI host chip set support' dep_bool ' Boot off-board controllers first' CONFIG_BLK_DEV_OFFBOARD $CONFIG_PCI
dep_bool ' Boot off-board chip sets first support' CONFIG_BLK_DEV_OFFBOARD $CONFIG_PCI dep_bool ' Sharing PCI ATA interrupts' CONFIG_IDEPCI_SHARE_IRQ $CONFIG_PCI
dep_bool ' Sharing PCI ATA interrupts support' CONFIG_IDEPCI_SHARE_IRQ $CONFIG_PCI
dep_bool ' Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_PCI dep_bool ' Generic PCI bus-master DMA support' CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_PCI
dep_bool ' Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI dep_bool ' Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' ATA tagged command queueing (DANGEROUS)' CONFIG_BLK_DEV_IDE_TCQ $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL dep_bool ' Tagged command queueing (DANGEROUS)' CONFIG_BLK_DEV_IDE_TCQ $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
dep_bool ' TCQ on by default' CONFIG_BLK_DEV_IDE_TCQ_DEFAULT $CONFIG_BLK_DEV_IDE_TCQ dep_bool ' TCQ on by default' CONFIG_BLK_DEV_IDE_TCQ_DEFAULT $CONFIG_BLK_DEV_IDE_TCQ
if [ "$CONFIG_BLK_DEV_IDE_TCQ" != "n" ]; then if [ "$CONFIG_BLK_DEV_IDE_TCQ" != "n" ]; then
int ' Default queue depth' CONFIG_BLK_DEV_IDE_TCQ_DEPTH 32 int ' Default queue depth' CONFIG_BLK_DEV_IDE_TCQ_DEPTH 32
...@@ -110,7 +107,7 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then ...@@ -110,7 +107,7 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
fi fi
# assume no ISA -> also no VLB # assume no ISA -> also no VLB
dep_bool ' Other ISA/VLB IDE chipset support' CONFIG_IDE_CHIPSETS $CONFIG_ISA dep_bool ' ISA/VLB IDE chipset support' CONFIG_IDE_CHIPSETS $CONFIG_ISA
if [ "$CONFIG_IDE_CHIPSETS" = "y" ]; then if [ "$CONFIG_IDE_CHIPSETS" = "y" ]; then
comment 'Note: most of these also require special kernel boot parameters' comment 'Note: most of these also require special kernel boot parameters'
bool ' ALI M14xx support' CONFIG_BLK_DEV_ALI14XX bool ' ALI M14xx support' CONFIG_BLK_DEV_ALI14XX
...@@ -122,15 +119,13 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then ...@@ -122,15 +119,13 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_tristate ' QDI QD65xx support' CONFIG_BLK_DEV_QD65XX $CONFIG_BLK_DEV_IDE dep_tristate ' QDI QD65xx support' CONFIG_BLK_DEV_QD65XX $CONFIG_BLK_DEV_IDE
bool ' UMC-8672 support' CONFIG_BLK_DEV_UMC8672 bool ' UMC-8672 support' CONFIG_BLK_DEV_UMC8672
fi fi
if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" -o \ if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" != "n" -o \
"$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" -o \ "$CONFIG_BLK_DEV_IDEDMA_PMAC" != "n" -o \
"$CONFIG_BLK_DEV_IDEDMA_ICS" = "y" ]; then "$CONFIG_BLK_DEV_IDEDMA_ICS" != "n" ]; then
bool ' IGNORE word93 Validation BITS' CONFIG_IDEDMA_IVB bool ' IGNORE word93 Validation BITS' CONFIG_IDEDMA_IVB
fi fi
define_bool CONFIG_ATAPI y
else else
bool 'Old hard disk (MFM/RLL/IDE) driver' CONFIG_BLK_DEV_HD_ONLY bool 'Old disk only (MFM/RLL/IDE) driver' CONFIG_BLK_DEV_HD_ONLY
define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_ONLY define_bool CONFIG_BLK_DEV_HD $CONFIG_BLK_DEV_HD_ONLY
fi fi
...@@ -142,8 +137,6 @@ else ...@@ -142,8 +137,6 @@ else
define_bool CONFIG_IDEDMA_AUTO n define_bool CONFIG_IDEDMA_AUTO n
fi fi
dep_tristate 'Support for IDE Raid controllers (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL dep_tristate 'Support for software RAID controllers (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL
dep_tristate ' Support Promise software RAID (Fasttrak(tm)) (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_PDC $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID dep_tristate ' Support Promise (Fasttrak(tm)) (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_PDC $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID
dep_tristate ' Highpoint 370 software RAID (EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_HPT $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID dep_tristate ' Highpoint 370 EXPERIMENTAL)' CONFIG_BLK_DEV_ATARAID_HPT $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID
endmenu
...@@ -15,7 +15,7 @@ obj-$(CONFIG_BLK_DEV_HD) += hd.o ...@@ -15,7 +15,7 @@ obj-$(CONFIG_BLK_DEV_HD) += hd.o
obj-$(CONFIG_BLK_DEV_IDE) += ide-mod.o obj-$(CONFIG_BLK_DEV_IDE) += ide-mod.o
obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
# obj-$(CONFIG_ATAPI) += atapi.o obj-$(CONFIG_ATAPI) += atapi.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
...@@ -69,6 +69,6 @@ obj-$(CONFIG_BLK_DEV_ATARAID_PDC) += pdcraid.o ...@@ -69,6 +69,6 @@ obj-$(CONFIG_BLK_DEV_ATARAID_PDC) += pdcraid.o
obj-$(CONFIG_BLK_DEV_ATARAID_HPT) += hptraid.o obj-$(CONFIG_BLK_DEV_ATARAID_HPT) += hptraid.o
ide-mod-objs := device.o ide-taskfile.o main.o ide.o probe.o \ ide-mod-objs := device.o ide-taskfile.o main.o ide.o probe.o \
ioctl.o atapi.o ata-timing.o $(ide-obj-y) ioctl.o ata-timing.o $(ide-obj-y)
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment