net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs

If an external PHY is connected via SGMII and uses in-band signalling
then the auto-negotiated values aren't propagated to the port,
resulting in a broken link. See discussion in [0]. This patch adds
this propagation. We need to call mv88e6xxx_port_setup_mac(),
therefore export it from chip.c.

Successfully tested on a ZII DTU with 88E6390 switch and an
Aquantia AQCS109 PHY connected via SGMII to port 9.

[0] https://marc.info/?t=155130287200001&r=1&w=2Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/mv88e6xxx/chip.c

@@ -549,8 +549,8 @@ int mv88e6xxx_update(struct mv88e6xxx_chip *chip, int addr, int reg, u16 update)
 	return mv88e6xxx_write(chip, addr, reg, val);
 }
 
-static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port,
-				    int link, int speed, int duplex, int pause,
+int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port, int link,
+			     int speed, int duplex, int pause,
 			     phy_interface_t mode)
 {
 	int err;

drivers/net/dsa/mv88e6xxx/chip.h

@@ -579,6 +579,9 @@ int mv88e6xxx_write(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val);
 int mv88e6xxx_update(struct mv88e6xxx_chip *chip, int addr, int reg,
 		     u16 update);
 int mv88e6xxx_wait(struct mv88e6xxx_chip *chip, int addr, int reg, u16 mask);
+int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port, int link,
+			     int speed, int duplex, int pause,
+			     phy_interface_t mode);
 struct mii_bus *mv88e6xxx_default_mdio_bus(struct mv88e6xxx_chip *chip);
 
 #endif /* _MV88E6XXX_CHIP_H */

drivers/net/dsa/mv88e6xxx/serdes.c

@@ -510,21 +510,48 @@ static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip,
 					    int port, int lane)
 {
 	struct dsa_switch *ds = chip->ds;
+	int duplex = DUPLEX_UNKNOWN;
+	int speed = SPEED_UNKNOWN;
+	int link, err;
 	u16 status;
-	bool up;
 
-	mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
-			      MV88E6390_SGMII_STATUS, &status);
+	err = mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
+				    MV88E6390_SGMII_PHY_STATUS, &status);
+	if (err) {
+		dev_err(chip->dev, "can't read SGMII PHY status: %d\n", err);
+		return;
+	}
 
-	/* Status must be read twice in order to give the current link
-	 * status. Otherwise the change in link status since the last
-	 * read of the register is returned.
-	 */
-	mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
-			      MV88E6390_SGMII_STATUS, &status);
-	up = status & MV88E6390_SGMII_STATUS_LINK;
+	link = status & MV88E6390_SGMII_PHY_STATUS_LINK ?
+	       LINK_FORCED_UP : LINK_FORCED_DOWN;
+
+	if (status & MV88E6390_SGMII_PHY_STATUS_SPD_DPL_VALID) {
+		duplex = status & MV88E6390_SGMII_PHY_STATUS_DUPLEX_FULL ?
+			 DUPLEX_FULL : DUPLEX_HALF;
+
+		switch (status & MV88E6390_SGMII_PHY_STATUS_SPEED_MASK) {
+		case MV88E6390_SGMII_PHY_STATUS_SPEED_1000:
+			speed = SPEED_1000;
+			break;
+		case MV88E6390_SGMII_PHY_STATUS_SPEED_100:
+			speed = SPEED_100;
+			break;
+		case MV88E6390_SGMII_PHY_STATUS_SPEED_10:
+			speed = SPEED_10;
+			break;
+		default:
+			dev_err(chip->dev, "invalid PHY speed\n");
+			return;
+		}
+	}
 
-	dsa_port_phylink_mac_change(ds, port, up);
+	err = mv88e6xxx_port_setup_mac(chip, port, link, speed, duplex,
+				       PAUSE_OFF, PHY_INTERFACE_MODE_NA);
+	if (err)
+		dev_err(chip->dev, "can't propagate PHY settings to MAC: %d\n",
+			err);
+	else
+		dsa_port_phylink_mac_change(ds, port, link == LINK_FORCED_UP);
 }
 
 static int mv88e6390_serdes_irq_enable_sgmii(struct mv88e6xxx_chip *chip,

drivers/net/dsa/mv88e6xxx/serdes.h

@@ -69,6 +69,14 @@
 #define MV88E6390_SGMII_INT_SYMBOL_ERROR	BIT(8)
 #define MV88E6390_SGMII_INT_FALSE_CARRIER	BIT(7)
 #define MV88E6390_SGMII_INT_STATUS	0xa002
+#define MV88E6390_SGMII_PHY_STATUS	0xa003
+#define MV88E6390_SGMII_PHY_STATUS_SPEED_MASK	GENMASK(15, 14)
+#define MV88E6390_SGMII_PHY_STATUS_SPEED_1000	0x8000
+#define MV88E6390_SGMII_PHY_STATUS_SPEED_100	0x4000
+#define MV88E6390_SGMII_PHY_STATUS_SPEED_10	0x0000
+#define MV88E6390_SGMII_PHY_STATUS_DUPLEX_FULL	BIT(13)
+#define MV88E6390_SGMII_PHY_STATUS_SPD_DPL_VALID BIT(11)
+#define MV88E6390_SGMII_PHY_STATUS_LINK		BIT(10)
 
 int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
 int mv88e6341_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);