Commit 72fe4858 authored by Glauber de Oliveira Costa's avatar Glauber de Oliveira Costa Committed by Ingo Molnar

x86: replace privileged instructions with paravirt macros

The assembly code in entry_64.S issues a bunch of privileged instructions,
like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so,
and we then replace them with macros that will do the right thing.
Signed-off-by: default avatarGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent e801f864
......@@ -50,6 +50,7 @@
#include <asm/hw_irq.h>
#include <asm/page.h>
#include <asm/irqflags.h>
#include <asm/paravirt.h>
.code64
......@@ -57,6 +58,13 @@
#define retint_kernel retint_restore_args
#endif
#ifdef CONFIG_PARAVIRT
ENTRY(native_irq_enable_syscall_ret)
movq %gs:pda_oldrsp,%rsp
swapgs
sysretq
#endif /* CONFIG_PARAVIRT */
.macro TRACE_IRQS_IRETQ offset=ARGOFFSET
#ifdef CONFIG_TRACE_IRQFLAGS
......@@ -216,14 +224,21 @@ ENTRY(system_call)
CFI_DEF_CFA rsp,PDA_STACKOFFSET
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
swapgs
SWAPGS_UNSAFE_STACK
/*
* A hypervisor implementation might want to use a label
* after the swapgs, so that it can do the swapgs
* for the guest and jump here on syscall.
*/
ENTRY(system_call_after_swapgs)
movq %rsp,%gs:pda_oldrsp
movq %gs:pda_kernelstack,%rsp
/*
* No need to follow this irqs off/on section - it's straight
* and short:
*/
sti
ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_ARGS 8,1
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
movq %rcx,RIP-ARGOFFSET(%rsp)
......@@ -246,7 +261,7 @@ ret_from_sys_call:
sysret_check:
LOCKDEP_SYS_EXIT
GET_THREAD_INFO(%rcx)
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
movl threadinfo_flags(%rcx),%edx
andl %edi,%edx
......@@ -260,9 +275,7 @@ sysret_check:
CFI_REGISTER rip,rcx
RESTORE_ARGS 0,-ARG_SKIP,1
/*CFI_REGISTER rflags,r11*/
movq %gs:pda_oldrsp,%rsp
swapgs
sysretq
ENABLE_INTERRUPTS_SYSCALL_RET
CFI_RESTORE_STATE
/* Handle reschedules */
......@@ -271,7 +284,7 @@ sysret_careful:
bt $TIF_NEED_RESCHED,%edx
jnc sysret_signal
TRACE_IRQS_ON
sti
ENABLE_INTERRUPTS(CLBR_NONE)
pushq %rdi
CFI_ADJUST_CFA_OFFSET 8
call schedule
......@@ -282,7 +295,7 @@ sysret_careful:
/* Handle a signal */
sysret_signal:
TRACE_IRQS_ON
sti
ENABLE_INTERRUPTS(CLBR_NONE)
testl $_TIF_DO_NOTIFY_MASK,%edx
jz 1f
......@@ -295,7 +308,7 @@ sysret_signal:
1: movl $_TIF_NEED_RESCHED,%edi
/* Use IRET because user could have changed frame. This
works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp int_with_check
......@@ -327,7 +340,7 @@ tracesys:
*/
.globl int_ret_from_sys_call
int_ret_from_sys_call:
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $3,CS-ARGOFFSET(%rsp)
je retint_restore_args
......@@ -349,20 +362,20 @@ int_careful:
bt $TIF_NEED_RESCHED,%edx
jnc int_very_careful
TRACE_IRQS_ON
sti
ENABLE_INTERRUPTS(CLBR_NONE)
pushq %rdi
CFI_ADJUST_CFA_OFFSET 8
call schedule
popq %rdi
CFI_ADJUST_CFA_OFFSET -8
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp int_with_check
/* handle signals and tracing -- both require a full stack frame */
int_very_careful:
TRACE_IRQS_ON
sti
ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_REST
/* Check for syscall exit trace */
testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
......@@ -385,7 +398,7 @@ int_signal:
1: movl $_TIF_NEED_RESCHED,%edi
int_restore_rest:
RESTORE_REST
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp int_with_check
CFI_ENDPROC
......@@ -506,7 +519,7 @@ END(stub_rt_sigreturn)
CFI_DEF_CFA_REGISTER rbp
testl $3,CS(%rdi)
je 1f
swapgs
SWAPGS
/* irqcount is used to check if a CPU is already on an interrupt
stack or not. While this is essentially redundant with preempt_count
it is a little cheaper to use a separate counter in the PDA
......@@ -527,7 +540,7 @@ ENTRY(common_interrupt)
interrupt do_IRQ
/* 0(%rsp): oldrsp-ARGOFFSET */
ret_from_intr:
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
decl %gs:pda_irqcount
leaveq
......@@ -556,13 +569,13 @@ retint_swapgs: /* return to user-space */
/*
* The iretq could re-enable interrupts:
*/
cli
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_IRETQ
swapgs
SWAPGS
jmp restore_args
retint_restore_args: /* return to kernel space */
cli
DISABLE_INTERRUPTS(CLBR_ANY)
/*
* The iretq could re-enable interrupts:
*/
......@@ -570,10 +583,14 @@ retint_restore_args: /* return to kernel space */
restore_args:
RESTORE_ARGS 0,8,0
iret_label:
#ifdef CONFIG_PARAVIRT
INTERRUPT_RETURN
#endif
ENTRY(native_iret)
iretq
.section __ex_table,"a"
.quad iret_label,bad_iret
.quad native_iret, bad_iret
.previous
.section .fixup,"ax"
/* force a signal here? this matches i386 behaviour */
......@@ -581,7 +598,7 @@ iret_label:
bad_iret:
movq $11,%rdi /* SIGSEGV */
TRACE_IRQS_ON
sti
ENABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
jmp do_exit
.previous
......@@ -591,14 +608,14 @@ retint_careful:
bt $TIF_NEED_RESCHED,%edx
jnc retint_signal
TRACE_IRQS_ON
sti
ENABLE_INTERRUPTS(CLBR_NONE)
pushq %rdi
CFI_ADJUST_CFA_OFFSET 8
call schedule
popq %rdi
CFI_ADJUST_CFA_OFFSET -8
GET_THREAD_INFO(%rcx)
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp retint_check
......@@ -606,14 +623,14 @@ retint_signal:
testl $_TIF_DO_NOTIFY_MASK,%edx
jz retint_swapgs
TRACE_IRQS_ON
sti
ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_REST
movq $-1,ORIG_RAX(%rsp)
xorl %esi,%esi # oldset
movq %rsp,%rdi # &pt_regs
call do_notify_resume
RESTORE_REST
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
movl $_TIF_NEED_RESCHED,%edi
GET_THREAD_INFO(%rcx)
......@@ -731,7 +748,7 @@ END(spurious_interrupt)
rdmsr
testl %edx,%edx
js 1f
swapgs
SWAPGS
xorl %ebx,%ebx
1:
.if \ist
......@@ -747,7 +764,7 @@ END(spurious_interrupt)
.if \ist
addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
.endif
cli
DISABLE_INTERRUPTS(CLBR_NONE)
.if \irqtrace
TRACE_IRQS_OFF
.endif
......@@ -776,10 +793,10 @@ paranoid_swapgs\trace:
.if \trace
TRACE_IRQS_IRETQ 0
.endif
swapgs
SWAPGS_UNSAFE_STACK
paranoid_restore\trace:
RESTORE_ALL 8
iretq
INTERRUPT_RETURN
paranoid_userspace\trace:
GET_THREAD_INFO(%rcx)
movl threadinfo_flags(%rcx),%ebx
......@@ -794,11 +811,11 @@ paranoid_userspace\trace:
.if \trace
TRACE_IRQS_ON
.endif
sti
ENABLE_INTERRUPTS(CLBR_NONE)
xorl %esi,%esi /* arg2: oldset */
movq %rsp,%rdi /* arg1: &pt_regs */
call do_notify_resume
cli
DISABLE_INTERRUPTS(CLBR_NONE)
.if \trace
TRACE_IRQS_OFF
.endif
......@@ -807,9 +824,9 @@ paranoid_schedule\trace:
.if \trace
TRACE_IRQS_ON
.endif
sti
ENABLE_INTERRUPTS(CLBR_ANY)
call schedule
cli
DISABLE_INTERRUPTS(CLBR_ANY)
.if \trace
TRACE_IRQS_OFF
.endif
......@@ -862,7 +879,7 @@ KPROBE_ENTRY(error_entry)
testl $3,CS(%rsp)
je error_kernelspace
error_swapgs:
swapgs
SWAPGS
error_sti:
movq %rdi,RDI(%rsp)
CFI_REL_OFFSET rdi,RDI
......@@ -874,7 +891,7 @@ error_sti:
error_exit:
movl %ebx,%eax
RESTORE_REST
cli
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
GET_THREAD_INFO(%rcx)
testl %eax,%eax
......@@ -911,12 +928,12 @@ ENTRY(load_gs_index)
CFI_STARTPROC
pushf
CFI_ADJUST_CFA_OFFSET 8
cli
swapgs
DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
SWAPGS
gs_change:
movl %edi,%gs
2: mfence /* workaround */
swapgs
SWAPGS
popf
CFI_ADJUST_CFA_OFFSET -8
ret
......@@ -930,7 +947,7 @@ ENDPROC(load_gs_index)
.section .fixup,"ax"
/* running with kernelgs */
bad_gs:
swapgs /* switch back to user gs */
SWAPGS /* switch back to user gs */
xorl %eax,%eax
movl %eax,%gs
jmp 2b
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment