Commit 74522a92 authored by Chaitra P B's avatar Chaitra P B Committed by Martin K. Petersen

scsi: mpt3sas: Optimize I/O memory consumption in driver.

For every IO, memory of PAGE size is allocated for handling NVMe native
PRPS. And in addition to that for every IO (chains need per IO * chain
buffer size, e.g. 38 * 128byte) amount of memory is allocated for chain
buffers.

However, at any point of time; the IO request can be for NVMe target
device (where PRP's page is used for framing PRP's) or can be for SCSI
target device (where chain buffers are used for framing chain
SGE's). This patch modifies the driver to reuse same pre-allocated PRP
page buffers as a chain buffer for IO's targeted for SCSI target
devices. No need to allocate separate buffers for chain SGE's buffers.

Suppose if the number of chain buffers need for IO doesn't fit in the
PRP Page size then driver maintain's separate buffers for those extra
chain buffers that exceeds the PRP page size. For example consider PRP
page size as 4K and chain buffer size as 128 bytes, then number of chain
buffers that can fit in PRP page is 4096/128 => 32. if the number of
chain buffer need per IO exceeds 32; for example consider number of
chains need per IO is 36 then for remaining 4 chain buffer's driver
allocates them individual.
Signed-off-by: default avatarChaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: default avatarSuganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 93204b78
......@@ -4191,7 +4191,8 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc)
kfree(ioc->internal_lookup);
if (ioc->chain_lookup) {
for (i = 0; i < ioc->scsiio_depth; i++) {
for (j = 0; j < ioc->chains_needed_per_io; j++) {
for (j = ioc->chains_per_prp_buffer;
j < ioc->chains_needed_per_io; j++) {
ct = &ioc->chain_lookup[i].chains_per_smid[j];
if (ct && ct->chain_buffer)
dma_pool_free(ioc->chain_dma_pool,
......@@ -4523,33 +4524,6 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
}
}
ioc->chain_dma_pool = dma_pool_create("chain pool", &ioc->pdev->dev,
ioc->chain_segment_sz, 16, 0);
if (!ioc->chain_dma_pool) {
pr_err(MPT3SAS_FMT "chain_dma_pool: dma_pool_create failed\n",
ioc->name);
goto out;
}
for (i = 0; i < ioc->scsiio_depth; i++) {
for (j = 0; j < ioc->chains_needed_per_io; j++) {
ct = &ioc->chain_lookup[i].chains_per_smid[j];
ct->chain_buffer = dma_pool_alloc(
ioc->chain_dma_pool , GFP_KERNEL,
&ct->chain_buffer_dma);
if (!ct->chain_buffer) {
pr_err(MPT3SAS_FMT "chain_lookup: "
" pci_pool_alloc failed\n", ioc->name);
goto out;
}
}
total_sz += ioc->chain_segment_sz;
}
dinitprintk(ioc, pr_info(MPT3SAS_FMT
"chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
ioc->name, ioc->chain_depth, ioc->chain_segment_sz,
((ioc->chain_depth * ioc->chain_segment_sz))/1024));
/* initialize hi-priority queue smid's */
ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
sizeof(struct request_tracker), GFP_KERNEL);
......@@ -4590,6 +4564,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
* be required for NVMe PRP's, only each set of NVMe blocks will be
* contiguous, so a new set is allocated for each possible I/O.
*/
ioc->chains_per_prp_buffer = 0;
if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) {
nvme_blocks_needed =
(ioc->shost->sg_tablesize * NVME_PRP_SIZE) - 1;
......@@ -4612,6 +4587,11 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
ioc->name);
goto out;
}
ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz;
ioc->chains_per_prp_buffer = min(ioc->chains_per_prp_buffer,
ioc->chains_needed_per_io);
for (i = 0; i < ioc->scsiio_depth; i++) {
ioc->pcie_sg_lookup[i].pcie_sgl = dma_pool_alloc(
ioc->pcie_sgl_dma_pool, GFP_KERNEL,
......@@ -4622,13 +4602,55 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
ioc->name);
goto out;
}
for (j = 0; j < ioc->chains_per_prp_buffer; j++) {
ct = &ioc->chain_lookup[i].chains_per_smid[j];
ct->chain_buffer =
ioc->pcie_sg_lookup[i].pcie_sgl +
(j * ioc->chain_segment_sz);
ct->chain_buffer_dma =
ioc->pcie_sg_lookup[i].pcie_sgl_dma +
(j * ioc->chain_segment_sz);
}
}
dinitprintk(ioc, pr_info(MPT3SAS_FMT "PCIe sgl pool depth(%d), "
"element_size(%d), pool_size(%d kB)\n", ioc->name,
ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024));
dinitprintk(ioc, pr_info(MPT3SAS_FMT "Number of chains can "
"fit in a PRP page(%d)\n", ioc->name,
ioc->chains_per_prp_buffer));
total_sz += sz * ioc->scsiio_depth;
}
ioc->chain_dma_pool = dma_pool_create("chain pool", &ioc->pdev->dev,
ioc->chain_segment_sz, 16, 0);
if (!ioc->chain_dma_pool) {
pr_err(MPT3SAS_FMT "chain_dma_pool: dma_pool_create failed\n",
ioc->name);
goto out;
}
for (i = 0; i < ioc->scsiio_depth; i++) {
for (j = ioc->chains_per_prp_buffer;
j < ioc->chains_needed_per_io; j++) {
ct = &ioc->chain_lookup[i].chains_per_smid[j];
ct->chain_buffer = dma_pool_alloc(
ioc->chain_dma_pool, GFP_KERNEL,
&ct->chain_buffer_dma);
if (!ct->chain_buffer) {
pr_err(MPT3SAS_FMT "chain_lookup: "
" pci_pool_alloc failed\n", ioc->name);
_base_release_memory_pools(ioc);
goto out;
}
}
total_sz += ioc->chain_segment_sz;
}
dinitprintk(ioc, pr_info(MPT3SAS_FMT
"chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
ioc->name, ioc->chain_depth, ioc->chain_segment_sz,
((ioc->chain_depth * ioc->chain_segment_sz))/1024));
/* sense buffers, 4 byte align */
sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
ioc->sense_dma_pool = dma_pool_create("sense pool", &ioc->pdev->dev, sz,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment