Commit 74f6ae84 authored by Antonino A. Daplas's avatar Antonino A. Daplas Committed by Linus Torvalds

[PATCH] i810fb: Add i2c/DDC support

Add ddc/i2c support for i810fb.  This will allow the driver to get display
information, especially for monitors with fickle timings.  The i2c support
depends on CONFIG_FB_I810_GTF.

Changed __init* to __devinit*
Signed-off-by: default avatarAntonino Daplas <adaplas@pol.net>
Signed-off-by: default avatarAlexander Nyberg <alexn@telia.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 829e79b6
......@@ -751,6 +751,12 @@ config FB_I810_GTF
If unsure, say N.
config FB_I810_I2C
bool "Enable DDC Support"
depends on FB_I810 && I2C && FB_I810_GTF
select I2C_ALGOBIT
help
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
......
......@@ -4,7 +4,6 @@
obj-$(CONFIG_FB_I810) += i810fb.o
i810fb-objs := i810_main.o i810_accel.o
ifdef CONFIG_FB_I810_GTF
......@@ -12,3 +11,7 @@ i810fb-objs += i810_gtf.o
else
i810fb-objs += i810_dvt.o
endif
ifdef CONFIG_FB_I810_I2C
i810fb-objs += i810-i2c.o
endif
/*-*- linux-c -*-
* linux/drivers/video/i810-i2c.c -- Intel 810/815 I2C support
*
* Copyright (C) 2004 Antonino Daplas<adaplas@pol.net>
* All Rights Reserved
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/fb.h>
#include "i810.h"
#include "i810_regs.h"
#include "../edid.h"
#define I810_DDC 0x50
/* bit locations in the registers */
#define SCL_DIR_MASK 0x0001
#define SCL_DIR 0x0002
#define SCL_VAL_MASK 0x0004
#define SCL_VAL_OUT 0x0008
#define SCL_VAL_IN 0x0010
#define SDA_DIR_MASK 0x0100
#define SDA_DIR 0x0200
#define SDA_VAL_MASK 0x0400
#define SDA_VAL_OUT 0x0800
#define SDA_VAL_IN 0x1000
#define DEBUG /* define this for verbose EDID parsing output */
#ifdef DEBUG
#define DPRINTK(fmt, args...) printk(fmt,## args)
#else
#define DPRINTK(fmt, args...)
#endif
static void i810i2c_setscl(void *data, int state)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOB, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
SCL_DIR_MASK | SCL_VAL_MASK);
i810_readl(mmio, GPIOB); /* flush posted write */
}
static void i810i2c_setsda(void *data, int state)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOB, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
SDA_DIR_MASK | SDA_VAL_MASK);
i810_readl(mmio, GPIOB); /* flush posted write */
}
static int i810i2c_getscl(void *data)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOB, SCL_DIR_MASK);
i810_writel(mmio, GPIOB, 0);
return (0 != (i810_readl(mmio, GPIOB) & SCL_VAL_IN));
}
static int i810i2c_getsda(void *data)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOB, SDA_DIR_MASK);
i810_writel(mmio, GPIOB, 0);
return (0 != (i810_readl(mmio, GPIOB) & SDA_VAL_IN));
}
static void i810ddc_setscl(void *data, int state)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOA, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
SCL_DIR_MASK | SCL_VAL_MASK);
i810_readl(mmio, GPIOA); /* flush posted write */
}
static void i810ddc_setsda(void *data, int state)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOA, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
SDA_DIR_MASK | SDA_VAL_MASK);
i810_readl(mmio, GPIOA); /* flush posted write */
}
static int i810ddc_getscl(void *data)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOA, SCL_DIR_MASK);
i810_writel(mmio, GPIOA, 0);
return (0 != (i810_readl(mmio, GPIOA) & SCL_VAL_IN));
}
static int i810ddc_getsda(void *data)
{
struct i810fb_i2c_chan *chan = (struct i810fb_i2c_chan *)data;
struct i810fb_par *par = chan->par;
u8 *mmio = par->mmio_start_virtual;
i810_writel(mmio, GPIOA, SDA_DIR_MASK);
i810_writel(mmio, GPIOA, 0);
return (0 != (i810_readl(mmio, GPIOA) & SDA_VAL_IN));
}
#define I2C_ALGO_DDC_I810 0x0e0000
#define I2C_ALGO_I2C_I810 0x0f0000
static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name,
int conn)
{
int rc;
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->dev->dev;
switch (conn) {
case 1:
chan->adapter.id = I2C_ALGO_DDC_I810;
chan->algo.setsda = i810ddc_setsda;
chan->algo.setscl = i810ddc_setscl;
chan->algo.getsda = i810ddc_getsda;
chan->algo.getscl = i810ddc_getscl;
break;
case 2:
chan->adapter.id = I2C_ALGO_I2C_I810;
chan->algo.setsda = i810i2c_setsda;
chan->algo.setscl = i810i2c_setscl;
chan->algo.getsda = i810i2c_getsda;
chan->algo.getscl = i810i2c_getscl;
break;
}
chan->algo.udelay = 10;
chan->algo.mdelay = 10;
chan->algo.timeout = (HZ/2);
chan->algo.data = chan;
i2c_set_adapdata(&chan->adapter, chan);
/* Raise SCL and SDA */
chan->algo.setsda(chan, 1);
chan->algo.setscl(chan, 1);
udelay(20);
rc = i2c_bit_add_bus(&chan->adapter);
if (rc == 0)
dev_dbg(&chan->par->dev->dev, "I2C bus %s registered.\n",name);
else
dev_warn(&chan->par->dev->dev, "Failed to register I2C bus "
"%s.\n", name);
return rc;
}
void i810_create_i2c_busses(struct i810fb_par *par)
{
par->chan[0].par = par;
par->chan[1].par = par;
i810_setup_i2c_bus(&par->chan[0], "I810-DDC", 1);
i810_setup_i2c_bus(&par->chan[1], "I810-I2C", 2);
}
void i810_delete_i2c_busses(struct i810fb_par *par)
{
if (par->chan[0].par)
i2c_bit_del_bus(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
i2c_bit_del_bus(&par->chan[1].adapter);
par->chan[1].par = NULL;
}
static u8 *i810_do_probe_i2c_edid(struct i810fb_i2c_chan *chan)
{
u8 start = 0x0;
struct i2c_msg msgs[] = {
{
.addr = I810_DDC,
.len = 1,
.buf = &start,
}, {
.addr = I810_DDC,
.flags = I2C_M_RD,
.len = EDID_LENGTH,
},
};
u8 *buf;
buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
if (!buf) {
DPRINTK("i810-i2c: Failed to allocate memory\n");
return NULL;
}
msgs[1].buf = buf;
if (i2c_transfer(&chan->adapter, msgs, 2) == 2) {
DPRINTK("i810-i2c: I2C Transfer successful\n");
return buf;
}
DPRINTK("i810-i2c: Unable to read EDID block.\n");
kfree(buf);
return NULL;
}
int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
{
struct i810fb_par *par = info->par;
u8 *edid = NULL;
int i;
DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn);
if (conn < 3) {
for (i = 0; i < 3; i++) {
/* Do the real work */
edid = i810_do_probe_i2c_edid(&par->chan[conn-1]);
if (edid)
break;
}
} else {
DPRINTK("i810-i2c: Getting EDID from BIOS\n");
edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
if (edid)
memcpy(edid, fb_firmware_edid(info->device),
EDID_LENGTH);
}
if (out_edid)
*out_edid = edid;
return (edid) ? 0 : 1;
}
......@@ -16,6 +16,9 @@
#include <linux/list.h>
#include <linux/agp_backend.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
#include <video/vga.h>
/* Fence */
......@@ -240,6 +243,14 @@ struct state_registers {
u8 cr39, cr41, cr70, sr01, msr;
};
struct i810fb_par;
struct i810fb_i2c_chan {
struct i810fb_par *par;
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
};
struct i810fb_par {
struct mode_registers regs;
struct state_registers hw_state;
......@@ -251,10 +262,12 @@ struct i810fb_par {
struct heap_data iring;
struct heap_data cursor_heap;
struct vgastate state;
struct i810fb_i2c_chan chan[2];
atomic_t use_count;
u32 pseudo_palette[17];
unsigned long mmio_start_phys;
u8 __iomem *mmio_start_virtual;
u8 *edid;
u32 pitch;
u32 pixconf;
u32 watermark;
......
......@@ -92,20 +92,21 @@ static struct pci_driver i810fb_driver = {
.resume = i810fb_resume,
};
static int vram __initdata = 4;
static int bpp __initdata = 8;
static int mtrr __initdata = 0;
static int accel __initdata = 0;
static int hsync1 __initdata = 0;
static int hsync2 __initdata = 0;
static int vsync1 __initdata = 0;
static int vsync2 __initdata = 0;
static int xres __initdata = 640;
static int yres __initdata = 480;
static int vyres __initdata = 0;
static int sync __initdata = 0;
static int ext_vga __initdata = 0;
static int dcolor __initdata = 0;
static char *mode_option __devinitdata = NULL;
static int vram __devinitdata = 4;
static int bpp __devinitdata = 8;
static int mtrr __devinitdata = 0;
static int accel __devinitdata = 0;
static int hsync1 __devinitdata = 0;
static int hsync2 __devinitdata = 0;
static int vsync1 __devinitdata = 0;
static int vsync2 __devinitdata = 0;
static int xres __devinitdata = 640;
static int yres __devinitdata = 480;
static int vyres __devinitdata = 0;
static int sync __devinitdata = 0;
static int ext_vga __devinitdata = 0;
static int dcolor __devinitdata = 0;
/*------------------------------------------------------------*/
......@@ -947,31 +948,24 @@ static int i810_check_params(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct i810fb_par *par = (struct i810fb_par *) info->par;
int line_length, vidmem;
u32 xres, yres, vxres, vyres;
xres = var->xres;
yres = var->yres;
vxres = var->xres_virtual;
vyres = var->yres_virtual;
int line_length, vidmem, mode_valid = 0;
u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
/*
* Memory limit
*/
line_length = get_line_length(par, vxres,
var->bits_per_pixel);
line_length = get_line_length(par, vxres, var->bits_per_pixel);
vidmem = line_length*vyres;
if (vidmem > par->fb.size) {
vyres = par->fb.size/line_length;
if (vyres < yres) {
if (vyres < var->yres) {
vyres = yres;
vxres = par->fb.size/vyres;
vxres /= var->bits_per_pixel >> 3;
line_length = get_line_length(par, vxres,
var->bits_per_pixel);
vidmem = line_length * yres;
if (vxres < xres) {
if (vxres < var->xres) {
printk("i810fb: required video memory, "
"%d bytes, for %dx%d-%d (virtual) "
"is out of range\n",
......@@ -981,6 +975,10 @@ static int i810_check_params(struct fb_var_screeninfo *var,
}
}
}
var->xres_virtual = vxres;
var->yres_virtual = vyres;
/*
* Monitor limit
*/
......@@ -996,25 +994,39 @@ static int i810_check_params(struct fb_var_screeninfo *var,
info->monspecs.dclkmax = 204000000;
break;
}
info->monspecs.dclkmin = 15000000;
if (fb_validate_mode(var, info)) {
if (!fb_validate_mode(var, info))
mode_valid = 1;
#ifdef CONFIG_FB_I810_I2C
if (!mode_valid && info->monspecs.gtf &&
!fb_get_mode(FB_MAXTIMINGS, 0, var, info))
mode_valid = 1;
if (!mode_valid && info->monspecs.modedb_len) {
struct fb_videomode *mode;
mode = fb_find_best_mode(var, &info->modelist);
if (mode) {
fb_videomode_to_var(var, mode);
mode_valid = 1;
}
}
#endif
if (!mode_valid && info->monspecs.modedb_len == 0) {
if (fb_get_mode(FB_MAXTIMINGS, 0, var, info)) {
int default_sync = (info->monspecs.hfmin-HFMIN)
|(info->monspecs.hfmax-HFMAX)
|(info->monspecs.vfmin-VFMIN)
|(info->monspecs.vfmax-VFMAX);
printk("i810fb: invalid video mode%s\n",
default_sync ? "" :
". Specifying vsyncN/hsyncN parameters may help");
return -EINVAL;
default_sync ? "" : ". Specifying "
"vsyncN/hsyncN parameters may help");
}
}
var->xres = xres;
var->yres = yres;
var->xres_virtual = vxres;
var->yres_virtual = vyres;
return 0;
}
......@@ -1812,8 +1824,72 @@ i810_allocate_pci_resource(struct i810fb_par *par,
return 0;
}
static void __devinit i810fb_find_init_mode(struct fb_info *info)
{
struct fb_videomode mode;
struct fb_var_screeninfo var;
struct fb_monspecs *specs = NULL;
int found = 0;
#ifdef CONFIG_FB_I810_I2C
int i;
int err;
struct i810fb_par *par = info->par;
#endif
INIT_LIST_HEAD(&info->modelist);
memset(&mode, 0, sizeof(struct fb_videomode));
var = info->var;
#ifdef CONFIG_FB_I810_I2C
i810_create_i2c_busses(par);
for (i = 0; i < 3; i++) {
err = i810_probe_i2c_connector(info, &par->edid, i+1);
if (!err)
break;
}
if (!err)
printk("i810fb_init_pci: DDC probe successful\n");
fb_edid_to_monspecs(par->edid, &info->monspecs);
if (info->monspecs.modedb == NULL)
printk("i810fb_init_pci: Unable to get Mode Database\n");
specs = &info->monspecs;
fb_videomode_to_modelist(specs->modedb, specs->modedb_len,
&info->modelist);
if (specs->modedb != NULL) {
if (specs->misc & FB_MISC_1ST_DETAIL) {
for (i = 0; i < specs->modedb_len; i++) {
if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
mode = specs->modedb[i];
found = 1;
break;
}
}
}
if (!found) {
mode = specs->modedb[0];
found = 1;
}
fb_videomode_to_var(&var, &mode);
}
#endif
if (mode_option)
fb_find_mode(&var, info, mode_option, specs->modedb,
specs->modedb_len, (found) ? &mode : NULL,
info->var.bits_per_pixel);
info->var = var;
fb_destroy_modedb(specs->modedb);
specs->modedb = NULL;
}
#ifndef MODULE
static int __init i810fb_setup(char *options)
static int __devinit i810fb_setup(char *options)
{
char *this_opt, *suffix = NULL;
......@@ -1855,6 +1931,8 @@ static int __init i810fb_setup(char *options)
vsync2 = simple_strtoul(this_opt+7, NULL, 0);
else if (!strncmp(this_opt, "dcolor", 6))
dcolor = 1;
else
mode_option = this_opt;
}
return 0;
}
......@@ -1865,6 +1943,7 @@ static int __devinit i810fb_init_pci (struct pci_dev *dev,
{
struct fb_info *info;
struct i810fb_par *par = NULL;
struct fb_videomode mode;
int i, err = -1, vfreq, hfreq, pixclock;
i = 0;
......@@ -1873,7 +1952,7 @@ static int __devinit i810fb_init_pci (struct pci_dev *dev,
if (!info)
return -ENOMEM;
par = (struct i810fb_par *) info->par;
par = info->par;
par->dev = dev;
if (!(info->pixmap.addr = kmalloc(8*1024, GFP_KERNEL))) {
......@@ -1904,15 +1983,20 @@ static int __devinit i810fb_init_pci (struct pci_dev *dev,
info->fbops = &par->i810fb_ops;
info->pseudo_palette = par->pseudo_palette;
fb_alloc_cmap(&info->cmap, 256, 0);
i810fb_find_init_mode(info);
if ((err = info->fbops->fb_check_var(&info->var, info))) {
i810fb_release_resource(info, par);
return err;
}
fb_var_to_videomode(&mode, &info->var);
fb_add_videomode(&mode, &info->modelist);
encode_fix(&info->fix, info);
i810fb_init_ringbuffer(info);
err = register_framebuffer(info);
if (err < 0) {
i810fb_release_resource(info, par);
printk("i810fb_init: cannot register framebuffer device\n");
......@@ -1951,6 +2035,8 @@ static void i810fb_release_resource(struct fb_info *info,
struct gtt_data *gtt = &par->i810_gtt;
unset_mtrr(par);
i810_delete_i2c_busses(par);
if (par->i810_gtt.i810_cursor_memory)
agp_free_memory(gtt->i810_cursor_memory);
if (par->i810_gtt.i810_fb_memory)
......@@ -1960,7 +2046,8 @@ static void i810fb_release_resource(struct fb_info *info,
iounmap(par->mmio_start_virtual);
if (par->aperture.virtual)
iounmap(par->aperture.virtual);
if (par->edid)
kfree(par->edid);
if (par->res_flags & FRAMEBUFFER_REQ)
release_mem_region(par->aperture.physical,
par->aperture.size);
......@@ -1986,7 +2073,7 @@ static void __exit i810fb_remove_pci(struct pci_dev *dev)
}
#ifndef MODULE
static int __init i810fb_init(void)
static int __devinit i810fb_init(void)
{
char *option = NULL;
......@@ -2004,7 +2091,7 @@ static int __init i810fb_init(void)
#ifdef MODULE
static int __init i810fb_init(void)
static int __devinit i810fb_init(void)
{
hsync1 *= 1000;
hsync2 *= 1000;
......@@ -2052,6 +2139,8 @@ MODULE_PARM_DESC(sync, "wait for accel engine to finish drawing"
module_param(dcolor, bool, 0);
MODULE_PARM_DESC(dcolor, "use DirectColor visuals"
" (default = 0 = TrueColor)");
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Specify initial video mode");
MODULE_AUTHOR("Tony A. Daplas");
MODULE_DESCRIPTION("Framebuffer device for the Intel 810/815 and"
......
......@@ -83,6 +83,22 @@ extern int i810fb_sync (struct fb_info *p);
extern void i810fb_init_ringbuffer(struct fb_info *info);
extern void i810fb_load_front (u32 offset, struct fb_info *info);
#ifdef CONFIG_FB_I810_I2C
/* I2C */
extern int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
int conn);
extern void i810_create_i2c_busses(struct i810fb_par *par);
extern void i810_delete_i2c_busses(struct i810fb_par *par);
#else
static inline int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
int conn)
{
return 1;
}
static inline void i810_create_i2c_busses(struct i810fb_par *par) { }
static inline void i810_delete_i2c_busses(struct i810fb_par *par) { }
#endif
/* Conditionals */
#ifdef CONFIG_X86
inline void flush_cache(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment