staging: r8188eu: rename phy_query_rf_reg to rtw_hal_read_rfreg

And remove two one-line wrappers.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/hal/hal_intf.c

@@ -104,17 +104,6 @@ void rtw_hal_add_ra_tid(struct adapter *adapt, u32 bitmap, u8 arg,
 					       rssi_level);
 }
 
-u32 rtw_hal_read_rfreg(struct adapter *adapt, enum rf_radio_path rfpath,
-		       u32 regaddr, u32 bitmask)
-{
-	u32 data = 0;
-
-	if (adapt->HalFunc.read_rfreg)
-		data = adapt->HalFunc.read_rfreg(adapt, rfpath, regaddr,
-						    bitmask);
-	return data;
-}
-
 void rtw_hal_set_bwmode(struct adapter *adapt,
 			enum ht_channel_width bandwidth, u8 offset)
 {

drivers/staging/rtl8188eu/hal/phy.c

@@ -118,7 +118,7 @@ static void rf_serial_write(struct adapter *adapt,
 	phy_set_bb_reg(adapt, phyreg->rf3wireOffset, bMaskDWord, data_and_addr);
 }
 
-u32 phy_query_rf_reg(struct adapter *adapt, enum rf_radio_path rf_path,
+u32 rtw_hal_read_rfreg(struct adapter *adapt, enum rf_radio_path rf_path,
 		     u32 reg_addr, u32 bit_mask)
 {
 	u32 original_value, readback_value, bit_shift;
@@ -436,7 +436,7 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
 
 	dm_odm->RFCalibrateInfo.RegA24 = 0x090e1317;
 
-	thermal_val = (u8)phy_query_rf_reg(adapt, RF_PATH_A,
+	thermal_val = (u8)rtw_hal_read_rfreg(adapt, RF_PATH_A,
 					   RF_T_METER_88E, 0xfc00);
 
 	if (is2t)
@@ -1229,12 +1229,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
 	if ((tmpreg&0x70) != 0) {
 		/* 1. Read original RF mode */
 		/* Path-A */
-		rf_a_mode = phy_query_rf_reg(adapt, RF_PATH_A, RF_AC,
+		rf_a_mode = rtw_hal_read_rfreg(adapt, RF_PATH_A, RF_AC,
 					     bMask12Bits);
 
 		/* Path-B */
 		if (is2t)
-			rf_b_mode = phy_query_rf_reg(adapt, RF_PATH_B, RF_AC,
+			rf_b_mode = rtw_hal_read_rfreg(adapt, RF_PATH_B, RF_AC,
 						     bMask12Bits);
 
 		/* 2. Set RF mode = standby mode */
@@ -1249,7 +1249,7 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
 	}
 
 	/* 3. Read RF reg18 */
-	lc_cal = phy_query_rf_reg(adapt, RF_PATH_A, RF_CHNLBW, bMask12Bits);
+	lc_cal = rtw_hal_read_rfreg(adapt, RF_PATH_A, RF_CHNLBW, bMask12Bits);
 
 	/* 4. Set LC calibration begin bit15 */
 	phy_set_rf_reg(adapt, RF_PATH_A, RF_CHNLBW, bMask12Bits,

drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c

@@ -202,7 +202,6 @@ void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc)
 
 	pHalFunc->AntDivBeforeLinkHandler = &AntDivBeforeLink8188E;
 	pHalFunc->AntDivCompareHandler = &AntDivCompare8188E;
-	pHalFunc->read_rfreg = &phy_query_rf_reg;
 }
 
 /*  */

drivers/staging/rtl8188eu/hal/usb_halinit.c

@@ -810,8 +810,8 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
 	usb_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400);	/*  unit: 256us. 256ms */
 
 	/* Keep RfRegChnlVal for later use. */
-	haldata->RfRegChnlVal[0] = phy_query_rf_reg(Adapter, (enum rf_radio_path)0, RF_CHNLBW, bRFRegOffsetMask);
-	haldata->RfRegChnlVal[1] = phy_query_rf_reg(Adapter, (enum rf_radio_path)1, RF_CHNLBW, bRFRegOffsetMask);
+	haldata->RfRegChnlVal[0] = rtw_hal_read_rfreg(Adapter, (enum rf_radio_path)0, RF_CHNLBW, bRFRegOffsetMask);
+	haldata->RfRegChnlVal[1] = rtw_hal_read_rfreg(Adapter, (enum rf_radio_path)1, RF_CHNLBW, bRFRegOffsetMask);
 
 HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK);
 	_BBTurnOnBlock(Adapter);

drivers/staging/rtl8188eu/include/hal_intf.h

@@ -161,9 +161,6 @@ struct hal_ops {
 	void	(*AntDivCompareHandler)(struct adapter *adapter,
 					struct wlan_bssid_ex *dst,
 					struct wlan_bssid_ex *src);
-	u32	(*read_rfreg)(struct adapter *padapter,
-			      enum rf_radio_path eRFPath, u32 RegAddr,
-			      u32 BitMask);
 
 	void (*hal_reset_security_engine)(struct adapter *adapter);
 };

drivers/staging/rtl8188eu/include/phy.h

@@ -11,7 +11,7 @@ bool rtl88eu_phy_bb_config(struct adapter *adapt);
 
 u32 phy_query_bb_reg(struct adapter *adapt, u32 regaddr, u32 bitmask);
 void phy_set_bb_reg(struct adapter *adapt, u32 regaddr, u32 bitmask, u32 data);
-u32 phy_query_rf_reg(struct adapter *adapt, enum rf_radio_path rf_path,
+u32 rtw_hal_read_rfreg(struct adapter *adapt, enum rf_radio_path rf_path,
 		     u32 reg_addr, u32 bit_mask);
 void phy_set_rf_reg(struct adapter *adapt, enum rf_radio_path rf_path,
 		    u32 reg_addr, u32 bit_mask, u32 data);