Skip to content

L
linux
Commit 76d3f4c2 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'arc-v3.11-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc 

Pull first batch of ARC changes from Vineet Gupta:
 "There's a second bunch to follow next week - which depends on commits
  on other trees (irq/net).  I'd have preferred the accompanying ARC
  change via respective trees, but it didn't workout somehow.

  Highlights of changes:

   - Continuation of ARC MM changes from 3.10 including

       zero page optimization
       Setting pagecache pages dirty by default
       Non executable stack by default
       Reducing dcache flushes for aliasing VIPT config

   - Long overdue rework of pt_regs machinery - removing the unused word
     gutters and adding ECR register to baseline (helps cleanup lot of
     low level code)

   - Support for ARC gcc 4.8

   - Few other preventive fixes, cosmetics, usage of Kconfig helper..

  The diffstat is larger than normal primarily because of arcregs.h
  header split as well as beautification of macros in entry.h"

* tag 'arc-v3.11-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (32 commits)
  ARC: warn on improper stack unwind FDE entries
  arc: delete __cpuinit usage from all arc files
  ARC: [tlb-miss] Fix bug with CONFIG_ARC_DBG_TLB_MISS_COUNT
  ARC: [tlb-miss] Extraneous PTE bit testing/setting
  ARC: Adjustments for gcc 4.8
  ARC: Setup Vector Table Base in early boot
  ARC: Remove explicit passing around of ECR
  ARC: pt_regs update #5: Use real ECR for pt_regs->event vs. synth values
  ARC: stop using pt_regs->orig_r8
  ARC: pt_regs update #4: r25 saved/restored unconditionally
  ARC: K/U SP saved from one location in stack switching macro
  ARC: Entry Handler tweaks: Simplify branch for in-kernel preemption
  ARC: Entry Handler tweaks: Avoid hardcoded LIMMS for ECR values
  ARC: Increase readability of entry handlers
  ARC: pt_regs update #3: Remove unused gutter at start of callee_regs
  ARC: pt_regs update #2: Remove unused gutter at start of pt_regs
  ARC: pt_regs update #1: Align pt_regs end with end of kernel stack page
  ARC: pt_regs update #0: remove kernel stack canary
  ARC: [mm] Remove @write argument to do_page_fault()
  ARC: [mm] Make stack/heap Non-executable by default
  ...
parents c1101cbc baadb8fd
Show whitespace changes
Inline Side-by-side
Showing with 670 additions and 876 deletions
arch/arc/Kconfig
View file @ 76d3f4c2
......@@ -184,6 +184,7 @@ config ARC_CACHE_PAGES
config ARC_CACHE_VIPT_ALIASING
bool "Support VIPT Aliasing D$"
depends on ARC_HAS_DCACHE
default n
endif #ARC_CACHE
......@@ -361,13 +362,6 @@ config ARC_MISALIGN_ACCESS
Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
potential bugs in code
config ARC_STACK_NONEXEC
bool "Make stack non-executable"
default n
help
To disable the execute permissions of stack/heap of processes
which are enabled by default.
config HZ
int "Timer Frequency"
default 100
......
arch/arc/Makefile
View file @ 76d3f4c2
......@@ -9,25 +9,27 @@
UTS_MACHINE := arc
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := arc-elf32-
CROSS_COMPILE := arc-linux-uclibc-
endif
KBUILD_DEFCONFIG := fpga_defconfig
cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__
LINUXINCLUDE += -include ${src}/arch/arc/include/asm/defines.h
ifdef CONFIG_ARC_CURR_IN_REG
# For a global register defintion, make sure it gets passed to every file
# We had a customer reported bug where some code built in kernel was NOT using
# any kernel headers, and missing the r25 global register
# Can't do unconditionally (like above) because of recursive include issues
# Can't do unconditionally because of recursive include issues
# due to <linux/thread_info.h>
LINUXINCLUDE += -include ${src}/arch/arc/include/asm/current.h
endif
atleast_gcc44 := $(call cc-ifversion, -gt, 0402, y)
upto_gcc42 := $(call cc-ifversion, -le, 0402, y)
upto_gcc44 := $(call cc-ifversion, -le, 0404, y)
atleast_gcc44 := $(call cc-ifversion, -ge, 0404, y)
atleast_gcc48 := $(call cc-ifversion, -ge, 0408, y)
cflags-$(atleast_gcc44) += -fsection-anchors
cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock
......@@ -35,6 +37,11 @@ cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
cflags-$(CONFIG_ARC_HAS_RTSC) += -mrtsc
cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables
# By default gcc 4.8 generates dwarf4 which kernel unwinder can't grok
ifeq ($(atleast_gcc48),y)
cflags-$(CONFIG_ARC_DW2_UNWIND) += -gdwarf-2
endif
ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
# Generic build system uses -O2, we want -O3
cflags-y += -O3
......@@ -48,11 +55,10 @@ cflags-$(disable_small_data) += -mno-sdata -fcall-used-gp
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mbig-endian
ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB
# STAR 9000518362:
# STAR 9000518362: (fixed with binutils shipping with gcc 4.8)
# arc-linux-uclibc-ld (buildroot) or arceb-elf32-ld (EZChip) don't accept
# --build-id w/o "-marclinux".
# Default arc-elf32-ld is OK
ldflags-y += -marclinux
# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
ldflags-$(upto_gcc44) += -marclinux
ARC_LIBGCC := -mA7
cflags-$(CONFIG_ARC_HAS_HW_MPY) += -multcost=16
......@@ -66,8 +72,8 @@ ifndef CONFIG_ARC_HAS_HW_MPY
# With gcc 4.4.7, -mno-mpy is enough to make any other related adjustments,
# e.g. increased cost of MPY. With gcc 4.2.1 this had to be explicitly hinted
ifeq ($(upto_gcc42),y)
ARC_LIBGCC := -marc600
ifneq ($(atleast_gcc44),y)
cflags-y += -multcost=30
endif
endif
......
arch/arc/configs/fpga_defconfig
View file @ 76d3f4c2
CONFIG_CROSS_COMPILE="arc-elf32-"
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
......
arch/arc/configs/nsimosci_defconfig
View file @ 76d3f4c2
CONFIG_CROSS_COMPILE="arc-elf32-"
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
......
arch/arc/configs/tb10x_defconfig
View file @ 76d3f4c2
CONFIG_CROSS_COMPILE="arc-elf32-"
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="tb10x"
CONFIG_SYSVIPC=y
......
arch/arc/include/asm/arcregs.h
View file @ 76d3f4c2
......@@ -20,7 +20,6 @@
#define ARC_REG_PERIBASE_BCR 0x69
#define ARC_REG_FP_BCR 0x6B /* Single-Precision FPU */
#define ARC_REG_DPFP_BCR 0x6C /* Dbl Precision FPU */
#define ARC_REG_MMU_BCR 0x6f
#define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */
#define ARC_REG_TIMERS_BCR 0x75
#define ARC_REG_ICCM_BCR 0x78
......@@ -34,22 +33,12 @@
#define ARC_REG_D_UNCACH_BCR 0x6A
/* status32 Bits Positions */
#define STATUS_H_BIT 0 /* CPU Halted */
#define STATUS_E1_BIT 1 /* Int 1 enable */
#define STATUS_E2_BIT 2 /* Int 2 enable */
#define STATUS_A1_BIT 3 /* Int 1 active */
#define STATUS_A2_BIT 4 /* Int 2 active */
#define STATUS_AE_BIT 5 /* Exception active */
#define STATUS_DE_BIT 6 /* PC is in delay slot */
#define STATUS_U_BIT 7 /* User/Kernel mode */
#define STATUS_L_BIT 12 /* Loop inhibit */
/* These masks correspond to the status word(STATUS_32) bits */
#define STATUS_H_MASK (1<<STATUS_H_BIT)
#define STATUS_E1_MASK (1<<STATUS_E1_BIT)
#define STATUS_E2_MASK (1<<STATUS_E2_BIT)
#define STATUS_A1_MASK (1<<STATUS_A1_BIT)
#define STATUS_A2_MASK (1<<STATUS_A2_BIT)
#define STATUS_AE_MASK (1<<STATUS_AE_BIT)
#define STATUS_DE_MASK (1<<STATUS_DE_BIT)
#define STATUS_U_MASK (1<<STATUS_U_BIT)
......@@ -71,6 +60,7 @@
#define ECR_V_ITLB_MISS 0x21
#define ECR_V_DTLB_MISS 0x22
#define ECR_V_PROTV 0x23
#define ECR_V_TRAP 0x25
/* Protection Violation Exception Cause Code Values */
#define ECR_C_PROTV_INST_FETCH 0x00
......@@ -79,94 +69,23 @@
#define ECR_C_PROTV_XCHG 0x03
#define ECR_C_PROTV_MISALIG_DATA 0x04
#define ECR_C_BIT_PROTV_MISALIG_DATA 10
/* Machine Check Cause Code Values */
#define ECR_C_MCHK_DUP_TLB 0x01
/* DTLB Miss Exception Cause Code Values */
#define ECR_C_BIT_DTLB_LD_MISS 8
#define ECR_C_BIT_DTLB_ST_MISS 9
/* Dummy ECR values for Interrupts */
#define event_IRQ1 0x0031abcd
#define event_IRQ2 0x0032abcd
/* Auxiliary registers */
#define AUX_IDENTITY 4
#define AUX_INTR_VEC_BASE 0x25
#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */
#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */
#define AUX_IRQ_LV12 0x43 /* interrupt level register */
#define AUX_IENABLE 0x40c
#define AUX_ITRIGGER 0x40d
#define AUX_IPULSE 0x415
/* Timer related Aux registers */
#define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
#define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
#define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */
#define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */
#define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */
#define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
#define TIMER_CTRL_IE (1 << 0) /* Interupt when Count reachs limit */
#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
/* MMU Management regs */
#define ARC_REG_TLBPD0 0x405
#define ARC_REG_TLBPD1 0x406
#define ARC_REG_TLBINDEX 0x407
#define ARC_REG_TLBCOMMAND 0x408
#define ARC_REG_PID 0x409
#define ARC_REG_SCRATCH_DATA0 0x418
/* Bits in MMU PID register */
#define MMU_ENABLE (1 << 31) /* Enable MMU for process */
/* Error code if probe fails */
#define TLB_LKUP_ERR 0x80000000
/* TLB Commands */
#define TLBWrite 0x1
#define TLBRead 0x2
#define TLBGetIndex 0x3
#define TLBProbe 0x4
#if (CONFIG_ARC_MMU_VER >= 2)
#define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */
#define TLBIVUTLB 0x6 /* explicitly inv uTLBs */
#else
#undef TLBWriteNI /* These cmds don't exist on older MMU */
#undef TLBIVUTLB
#endif
/* Instruction cache related Auxiliary registers */
#define ARC_REG_IC_BCR 0x77 /* Build Config reg */
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
#define ARC_REG_IC_IVIL 0x19
#if (CONFIG_ARC_MMU_VER > 2)
#define ARC_REG_IC_PTAG 0x1E
#endif
/* Bit val in IC_CTRL */
#define IC_CTRL_CACHE_DISABLE 0x1
/* Data cache related Auxiliary registers */
#define ARC_REG_DC_BCR 0x72
#define ARC_REG_DC_IVDC 0x47
#define ARC_REG_DC_CTRL 0x48
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#if (CONFIG_ARC_MMU_VER > 2)
#define ARC_REG_DC_PTAG 0x5C
#endif
/* Bit val in DC_CTRL */
#define DC_CTRL_INV_MODE_FLUSH 0x40
#define DC_CTRL_FLUSH_STATUS 0x100
/* MMU Management regs */
#define ARC_REG_PID 0x409
#define ARC_REG_SCRATCH_DATA0 0x418
/* Bits in MMU PID register */
#define MMU_ENABLE (1 << 31) /* Enable MMU for process */
/*
* Floating Pt Registers
......@@ -293,24 +212,6 @@ struct bcr_identity {
#endif
};
struct bcr_mmu_1_2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
#else
unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
#endif
};
struct bcr_mmu_3 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4,
u_itlb:4, u_dtlb:4;
#else
unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4,
ways:4, ver:8;
#endif
};
#define EXTN_SWAP_VALID 0x1
#define EXTN_NORM_VALID 0x2
#define EXTN_MINMAX_VALID 0x2
......@@ -343,14 +244,6 @@ struct bcr_extn_xymem {
#endif
};
struct bcr_cache {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
#else
unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
#endif
};
struct bcr_perip {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int start:8, pad2:8, sz:8, pad:8;
......@@ -403,7 +296,7 @@ struct cpuinfo_arc_mmu {
};
struct cpuinfo_arc_cache {
unsigned int has_aliasing, sz, line_len, assoc, ver;
unsigned int sz, line_len, assoc, ver;
};
struct cpuinfo_arc_ccm {
......
arch/arc/include/asm/bug.h
View file @ 76d3f4c2
......@@ -18,9 +18,8 @@ struct task_struct;
void show_regs(struct pt_regs *regs);
void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs);
void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
unsigned long address, unsigned long cause_reg);
void die(const char *str, struct pt_regs *regs, unsigned long address,
unsigned long cause_reg);
unsigned long address);
void die(const char *str, struct pt_regs *regs, unsigned long address);
#define BUG() do { \
dump_stack(); \
......
arch/arc/include/asm/cache.h
View file @ 76d3f4c2
......@@ -18,21 +18,19 @@
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define ARC_ICACHE_WAYS 2
#define ARC_DCACHE_WAYS 4
/* Helpers */
/* For a rare case where customers have differently config I/D */
#define ARC_ICACHE_LINE_LEN L1_CACHE_BYTES
#define ARC_DCACHE_LINE_LEN L1_CACHE_BYTES
#define ICACHE_LINE_MASK (~(ARC_ICACHE_LINE_LEN - 1))
#define DCACHE_LINE_MASK (~(ARC_DCACHE_LINE_LEN - 1))
#if ARC_ICACHE_LINE_LEN != ARC_DCACHE_LINE_LEN
#error "Need to fix some code as I/D cache lines not same"
#else
#define is_not_cache_aligned(p) ((unsigned long)p & (~DCACHE_LINE_MASK))
#endif
/*
* ARC700 doesn't cache any access in top 256M.
* Ideal for wiring memory mapped peripherals as we don't need to do
* explicit uncached accesses (LD.di/ST.di) hence more portable drivers
*/
#define ARC_UNCACHED_ADDR_SPACE 0xc0000000
#ifndef __ASSEMBLY__
......@@ -57,16 +55,10 @@
#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
/*
* ARC700 doesn't cache any access in top 256M.
* Ideal for wiring memory mapped peripherals as we don't need to do
* explicit uncached accesses (LD.di/ST.di) hence more portable drivers
*/
#define ARC_UNCACHED_ADDR_SPACE 0xc0000000
extern void arc_cache_init(void);
extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
extern void __init read_decode_cache_bcr(void);
#endif
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_CACHE_H */
arch/arc/include/asm/cacheflush.h
View file @ 76d3f4c2
......@@ -80,17 +80,20 @@ void flush_anon_page(struct vm_area_struct *vma,
#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */
/*
* A new pagecache page has PG_arch_1 clear - thus dcache dirty by default
* This works around some PIO based drivers which don't call flush_dcache_page
* to record that they dirtied the dcache
*/
#define PG_dc_clean PG_arch_1
/*
* Simple wrapper over config option
* Bootup code ensures that hardware matches kernel configuration
*/
static inline int cache_is_vipt_aliasing(void)
{
#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
return 1;
#else
return 0;
#endif
return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
}
#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
......
arch/arc/include/asm/defines.h deleted 100644 → 0
View file @ c1101cbc
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARC_ASM_DEFINES_H__
#define __ARC_ASM_DEFINES_H__
#if defined(CONFIG_ARC_MMU_V1)
#define CONFIG_ARC_MMU_VER 1
#elif defined(CONFIG_ARC_MMU_V2)
#define CONFIG_ARC_MMU_VER 2
#elif defined(CONFIG_ARC_MMU_V3)
#define CONFIG_ARC_MMU_VER 3
#endif
#ifdef CONFIG_ARC_HAS_LLSC
#define __CONFIG_ARC_HAS_LLSC_VAL 1
#else
#define __CONFIG_ARC_HAS_LLSC_VAL 0
#endif
#ifdef CONFIG_ARC_HAS_SWAPE
#define __CONFIG_ARC_HAS_SWAPE_VAL 1
#else
#define __CONFIG_ARC_HAS_SWAPE_VAL 0
#endif
#ifdef CONFIG_ARC_HAS_RTSC
#define __CONFIG_ARC_HAS_RTSC_VAL 1
#else
#define __CONFIG_ARC_HAS_RTSC_VAL 0
#endif
#ifdef CONFIG_ARC_MMU_SASID
#define __CONFIG_ARC_MMU_SASID_VAL 1
#else
#define __CONFIG_ARC_MMU_SASID_VAL 0
#endif
#ifdef CONFIG_ARC_HAS_ICACHE
#define __CONFIG_ARC_HAS_ICACHE 1
#else
#define __CONFIG_ARC_HAS_ICACHE 0
#endif
#ifdef CONFIG_ARC_HAS_DCACHE
#define __CONFIG_ARC_HAS_DCACHE 1
#else
#define __CONFIG_ARC_HAS_DCACHE 0
#endif
#endif /* __ARC_ASM_DEFINES_H__ */
arch/arc/include/asm/entry.h
View file @ 76d3f4c2
......@@ -50,194 +50,177 @@
* Eff Addr for load = [reg2]
*/
.macro PUSH reg
st.a \reg, [sp, -4]
.endm
.macro PUSHAX aux
lr r9, [\aux]
PUSH r9
.endm
.macro POP reg
ld.ab \reg, [sp, 4]
.endm
.macro POPAX aux
POP r9
sr r9, [\aux]
.endm
/*--------------------------------------------------------------
* Save caller saved registers (scratch registers) ( r0 - r12 )
* Registers are pushed / popped in the order defined in struct ptregs
* in asm/ptrace.h
* Helpers to save/restore Scratch Regs:
* used by Interrupt/Exception Prologue/Epilogue
*-------------------------------------------------------------*/
.macro SAVE_CALLER_SAVED
st.a r0, [sp, -4]
st.a r1, [sp, -4]
st.a r2, [sp, -4]
st.a r3, [sp, -4]
st.a r4, [sp, -4]
st.a r5, [sp, -4]
st.a r6, [sp, -4]
st.a r7, [sp, -4]
st.a r8, [sp, -4]
st.a r9, [sp, -4]
st.a r10, [sp, -4]
st.a r11, [sp, -4]
st.a r12, [sp, -4]
.macro SAVE_R0_TO_R12
PUSH r0
PUSH r1
PUSH r2
PUSH r3
PUSH r4
PUSH r5
PUSH r6
PUSH r7
PUSH r8
PUSH r9
PUSH r10
PUSH r11
PUSH r12
.endm
.macro RESTORE_R12_TO_R0
POP r12
POP r11
POP r10
POP r9
POP r8
POP r7
POP r6
POP r5
POP r4
POP r3
POP r2
POP r1
POP r0
#ifdef CONFIG_ARC_CURR_IN_REG
ld r25, [sp, 12]
#endif
.endm
/*--------------------------------------------------------------
* Restore caller saved registers (scratch registers)
* Helpers to save/restore callee-saved regs:
* used by several macros below
*-------------------------------------------------------------*/
.macro RESTORE_CALLER_SAVED
ld.ab r12, [sp, 4]
ld.ab r11, [sp, 4]
ld.ab r10, [sp, 4]
ld.ab r9, [sp, 4]
ld.ab r8, [sp, 4]
ld.ab r7, [sp, 4]
ld.ab r6, [sp, 4]
ld.ab r5, [sp, 4]
ld.ab r4, [sp, 4]
ld.ab r3, [sp, 4]
ld.ab r2, [sp, 4]
ld.ab r1, [sp, 4]
ld.ab r0, [sp, 4]
.macro SAVE_R13_TO_R24
PUSH r13
PUSH r14
PUSH r15
PUSH r16
PUSH r17
PUSH r18
PUSH r19
PUSH r20
PUSH r21
PUSH r22
PUSH r23
PUSH r24
.endm
.macro RESTORE_R24_TO_R13
POP r24
POP r23
POP r22
POP r21
POP r20
POP r19
POP r18
POP r17
POP r16
POP r15
POP r14
POP r13
.endm
#define OFF_USER_R25_FROM_R24 (SZ_CALLEE_REGS + SZ_PT_REGS - 8)/4
/*--------------------------------------------------------------
* Save callee saved registers (non scratch registers) ( r13 - r25 )
* on kernel stack.
* User mode callee regs need to be saved in case of
* -fork and friends for replicating from parent to child
* -before going into do_signal( ) for ptrace/core-dump
* Special case handling is required for r25 in case it is used by kernel
* for caching task ptr. Low level exception/ISR save user mode r25
* into task->thread.user_r25. So it needs to be retrieved from there and
* saved into kernel stack with rest of callee reg-file
* Collect User Mode callee regs as struct callee_regs - needed by
* fork/do_signal/unaligned-access-emulation.
* (By default only scratch regs are saved on entry to kernel)
*
* Special handling for r25 if used for caching Task Pointer.
* It would have been saved in task->thread.user_r25 already, but to keep
* the interface same it is copied into regular r25 placeholder in
* struct callee_regs.
*-------------------------------------------------------------*/
.macro SAVE_CALLEE_SAVED_USER
st.a r13, [sp, -4]
st.a r14, [sp, -4]
st.a r15, [sp, -4]
st.a r16, [sp, -4]
st.a r17, [sp, -4]
st.a r18, [sp, -4]
st.a r19, [sp, -4]
st.a r20, [sp, -4]
st.a r21, [sp, -4]
st.a r22, [sp, -4]
st.a r23, [sp, -4]
st.a r24, [sp, -4]
SAVE_R13_TO_R24
#ifdef CONFIG_ARC_CURR_IN_REG
; Retrieve orig r25 and save it on stack
ld r12, [r25, TASK_THREAD + THREAD_USER_R25]
ld.as r12, [sp, OFF_USER_R25_FROM_R24]
st.a r12, [sp, -4]
#else
st.a r25, [sp, -4]
PUSH r25
#endif
/* move up by 1 word to "create" callee_regs->"stack_place_holder" */
sub sp, sp, 4
.endm
/*--------------------------------------------------------------
* Save callee saved registers (non scratch registers) ( r13 - r25 )
* kernel mode callee regs needed to be saved in case of context switch
* If r25 is used for caching task pointer then that need not be saved
* as it can be re-created from current task global
* Save kernel Mode callee regs at the time of Contect Switch.
*
* Special handling for r25 if used for caching Task Pointer.
* Kernel simply skips saving it since it will be loaded with
* incoming task pointer anyways
*-------------------------------------------------------------*/
.macro SAVE_CALLEE_SAVED_KERNEL
st.a r13, [sp, -4]
st.a r14, [sp, -4]
st.a r15, [sp, -4]
st.a r16, [sp, -4]
st.a r17, [sp, -4]
st.a r18, [sp, -4]
st.a r19, [sp, -4]
st.a r20, [sp, -4]
st.a r21, [sp, -4]
st.a r22, [sp, -4]
st.a r23, [sp, -4]
st.a r24, [sp, -4]
SAVE_R13_TO_R24
#ifdef CONFIG_ARC_CURR_IN_REG
sub sp, sp, 8
#else
st.a r25, [sp, -4]
sub sp, sp, 4
#else
PUSH r25
#endif
.endm
/*--------------------------------------------------------------
* RESTORE_CALLEE_SAVED_KERNEL:
* Loads callee (non scratch) Reg File by popping from Kernel mode stack.
* This is reverse of SAVE_CALLEE_SAVED,
*
* NOTE:
* Ideally this shd only be called in switch_to for loading
* switched-IN task's CALLEE Reg File.
* For all other cases RESTORE_CALLEE_SAVED_FAST must be used
* which simply pops the stack w/o touching regs.
* Opposite of SAVE_CALLEE_SAVED_KERNEL
*-------------------------------------------------------------*/
.macro RESTORE_CALLEE_SAVED_KERNEL
#ifdef CONFIG_ARC_CURR_IN_REG
add sp, sp, 8 /* skip callee_reg gutter and user r25 placeholder */
add sp, sp, 4 /* skip usual r25 placeholder */
#else
add sp, sp, 4 /* skip "callee_regs->stack_place_holder" */
ld.ab r25, [sp, 4]
POP r25
#endif
ld.ab r24, [sp, 4]
ld.ab r23, [sp, 4]
ld.ab r22, [sp, 4]
ld.ab r21, [sp, 4]
ld.ab r20, [sp, 4]
ld.ab r19, [sp, 4]
ld.ab r18, [sp, 4]
ld.ab r17, [sp, 4]
ld.ab r16, [sp, 4]
ld.ab r15, [sp, 4]
ld.ab r14, [sp, 4]
ld.ab r13, [sp, 4]
RESTORE_R24_TO_R13
.endm
/*--------------------------------------------------------------
* RESTORE_CALLEE_SAVED_USER:
* This is called after do_signal where tracer might have changed callee regs
* thus we need to restore the reg file.
* Special case handling is required for r25 in case it is used by kernel
* for caching task ptr. Ptrace would have modified on-kernel-stack value of
* r25, which needs to be shoved back into task->thread.user_r25 where from
* Low level exception/ISR return code will retrieve to populate with rest of
* callee reg-file.
* Opposite of SAVE_CALLEE_SAVED_USER
*
* ptrace tracer or unaligned-access fixup might have changed a user mode
* callee reg which is saved back to usual r25 storage location
*-------------------------------------------------------------*/
.macro RESTORE_CALLEE_SAVED_USER
add sp, sp, 4 /* skip "callee_regs->stack_place_holder" */
#ifdef CONFIG_ARC_CURR_IN_REG
ld.ab r12, [sp, 4]
st r12, [r25, TASK_THREAD + THREAD_USER_R25]
st.as r12, [sp, OFF_USER_R25_FROM_R24]
#else
ld.ab r25, [sp, 4]
POP r25
#endif
ld.ab r24, [sp, 4]
ld.ab r23, [sp, 4]
ld.ab r22, [sp, 4]
ld.ab r21, [sp, 4]
ld.ab r20, [sp, 4]
ld.ab r19, [sp, 4]
ld.ab r18, [sp, 4]
ld.ab r17, [sp, 4]
ld.ab r16, [sp, 4]
ld.ab r15, [sp, 4]
ld.ab r14, [sp, 4]
ld.ab r13, [sp, 4]
RESTORE_R24_TO_R13
.endm
/*--------------------------------------------------------------
* Super FAST Restore callee saved regs by simply re-adjusting SP
*-------------------------------------------------------------*/
.macro DISCARD_CALLEE_SAVED_USER
add sp, sp, 14 * 4
.endm
/*--------------------------------------------------------------
* Restore User mode r25 saved in task_struct->thread.user_r25
*-------------------------------------------------------------*/
.macro RESTORE_USER_R25
ld r25, [r25, TASK_THREAD + THREAD_USER_R25]
add sp, sp, SZ_CALLEE_REGS
.endm
/*-------------------------------------------------------------
......@@ -252,7 +235,7 @@
ld \out, [\tsk, TASK_THREAD_INFO]
/* Go to end of page where stack begins (grows upwards) */
add2 \out, \out, (THREAD_SIZE - 4)/4 /* one word GUTTER */
add2 \out, \out, (THREAD_SIZE)/4
.endm
......@@ -305,33 +288,28 @@
* safe-keeping not really needed, but it keeps the epilogue code
* (SP restore) simpler/uniform.
*/
b.d 77f
st.a sp, [sp, -12] ; Make room for orig_r0 and orig_r8
b.d 66f
mov r9, sp
88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */
GET_CURR_TASK_ON_CPU r9
#ifdef CONFIG_ARC_CURR_IN_REG
/* If current task pointer cached in r25, time to
* -safekeep USER r25 in task->thread_struct->user_r25
* -load r25 with current task ptr
*/
st.as r25, [r9, (TASK_THREAD + THREAD_USER_R25)/4]
mov r25, r9
#endif
/* With current tsk in r9, get it's kernel mode stack base */
GET_TSK_STACK_BASE r9, r9
#ifdef PT_REGS_CANARY
st 0xabcdabcd, [r9, 0]
66:
#ifdef CONFIG_ARC_CURR_IN_REG
/*
* Treat r25 as scratch reg, save it on stack first
* Load it with current task pointer
*/
st r25, [r9, -4]
GET_CURR_TASK_ON_CPU r25
#endif
/* Save Pre Intr/Exception User SP on kernel stack */
st.a sp, [r9, -12] ; Make room for orig_r0 and orig_r8
st.a sp, [r9, -16] ; Make room for orig_r0, ECR, user_r25
/* CAUTION:
* SP should be set at the very end when we are done with everything
......@@ -342,7 +320,7 @@
/* set SP to point to kernel mode stack */
mov sp, r9
77: /* ----- Stack Switched to kernel Mode, Now save REG FILE ----- */
/* ----- Stack Switched to kernel Mode, Now save REG FILE ----- */
.endm
......@@ -369,7 +347,7 @@
* @reg [OUT] &thread_info of "current"
*/
.macro GET_CURR_THR_INFO_FROM_SP reg
and \reg, sp, ~(THREAD_SIZE - 1)
bic \reg, sp, (THREAD_SIZE - 1)
.endm
/*
......@@ -413,62 +391,25 @@
* Note that syscalls are implemented via TRAP which is also a exception
* from CPU's point of view
*-------------------------------------------------------------*/
.macro SAVE_ALL_EXCEPTION marker
.macro SAVE_ALL_SYS
st \marker, [sp, 8] /* orig_r8 */
lr r9, [ecr]
st r9, [sp, 8] /* ECR */
st r0, [sp, 4] /* orig_r0, needed only for sys calls */
/* Restore r9 used to code the early prologue */
EXCPN_PROLOG_RESTORE_REG r9
SAVE_CALLER_SAVED
st.a r26, [sp, -4] /* gp */
st.a fp, [sp, -4]
st.a blink, [sp, -4]
lr r9, [eret]
st.a r9, [sp, -4]
lr r9, [erstatus]
st.a r9, [sp, -4]
st.a lp_count, [sp, -4]
lr r9, [lp_end]
st.a r9, [sp, -4]
lr r9, [lp_start]
st.a r9, [sp, -4]
lr r9, [erbta]
st.a r9, [sp, -4]
#ifdef PT_REGS_CANARY
mov r9, 0xdeadbeef
st r9, [sp, -4]
#endif
/* move up by 1 word to "create" pt_regs->"stack_place_holder" */
sub sp, sp, 4
.endm
/*--------------------------------------------------------------
* Save scratch regs for exceptions
*-------------------------------------------------------------*/
.macro SAVE_ALL_SYS
SAVE_ALL_EXCEPTION orig_r8_IS_EXCPN
.endm
/*--------------------------------------------------------------
* Save scratch regs for sys calls
*-------------------------------------------------------------*/
.macro SAVE_ALL_TRAP
/*
* Setup pt_regs->orig_r8.
* Encode syscall number (r8) in upper short word of event type (r9)
* N.B. #1: This is already endian safe (see ptrace.h)
* #2: Only r9 can be used as scratch as it is already clobbered
* and it's contents are no longer needed by the latter part
* of exception prologue
*/
lsl r9, r8, 16
or r9, r9, orig_r8_IS_SCALL
SAVE_ALL_EXCEPTION r9
SAVE_R0_TO_R12
PUSH gp
PUSH fp
PUSH blink
PUSHAX eret
PUSHAX erstatus
PUSH lp_count
PUSHAX lp_end
PUSHAX lp_start
PUSHAX erbta
.endm
/*--------------------------------------------------------------
......@@ -483,28 +424,22 @@
* by hardware and that is not good.
*-------------------------------------------------------------*/
.macro RESTORE_ALL_SYS
POPAX erbta
POPAX lp_start
POPAX lp_end
POP r9
mov lp_count, r9 ;LD to lp_count is not allowed
add sp, sp, 4 /* hop over unused "pt_regs->stack_place_holder" */
ld.ab r9, [sp, 4]
sr r9, [erbta]
ld.ab r9, [sp, 4]
sr r9, [lp_start]
ld.ab r9, [sp, 4]
sr r9, [lp_end]
ld.ab r9, [sp, 4]
mov lp_count, r9
ld.ab r9, [sp, 4]
sr r9, [erstatus]
ld.ab r9, [sp, 4]
sr r9, [eret]
ld.ab blink, [sp, 4]
ld.ab fp, [sp, 4]
ld.ab r26, [sp, 4] /* gp */
RESTORE_CALLER_SAVED
POPAX erstatus
POPAX eret
POP blink
POP fp
POP gp
RESTORE_R12_TO_R0
ld sp, [sp] /* restore original sp */
/* orig_r0 and orig_r8 skipped automatically */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm
......@@ -513,9 +448,7 @@
*-------------------------------------------------------------*/
.macro SAVE_ALL_INT1
/* restore original r9 , saved in int1_saved_reg
* It will be saved on stack in macro: SAVE_CALLER_SAVED
*/
/* restore original r9 to be saved as part of reg-file */
#ifdef CONFIG_SMP
lr r9, [ARC_REG_SCRATCH_DATA0]
#else
......@@ -523,29 +456,19 @@
#endif
/* now we are ready to save the remaining context :) */
st orig_r8_IS_IRQ1, [sp, 8] /* Event Type */
st event_IRQ1, [sp, 8] /* Dummy ECR */
st 0, [sp, 4] /* orig_r0 , N/A for IRQ */
SAVE_CALLER_SAVED
st.a r26, [sp, -4] /* gp */
st.a fp, [sp, -4]
st.a blink, [sp, -4]
st.a ilink1, [sp, -4]
lr r9, [status32_l1]
st.a r9, [sp, -4]
st.a lp_count, [sp, -4]
lr r9, [lp_end]
st.a r9, [sp, -4]
lr r9, [lp_start]
st.a r9, [sp, -4]
lr r9, [bta_l1]
st.a r9, [sp, -4]
#ifdef PT_REGS_CANARY
mov r9, 0xdeadbee1
st r9, [sp, -4]
#endif
/* move up by 1 word to "create" pt_regs->"stack_place_holder" */
sub sp, sp, 4
SAVE_R0_TO_R12
PUSH gp
PUSH fp
PUSH blink
PUSH ilink1
PUSHAX status32_l1
PUSH lp_count
PUSHAX lp_end
PUSHAX lp_start
PUSHAX bta_l1
.endm
.macro SAVE_ALL_INT2
......@@ -558,30 +481,19 @@
ld r9, [@int2_saved_reg]
/* now we are ready to save the remaining context :) */
st orig_r8_IS_IRQ2, [sp, 8] /* Event Type */
st event_IRQ2, [sp, 8] /* Dummy ECR */
st 0, [sp, 4] /* orig_r0 , N/A for IRQ */
SAVE_CALLER_SAVED
st.a r26, [sp, -4] /* gp */
st.a fp, [sp, -4]
st.a blink, [sp, -4]
st.a ilink2, [sp, -4]
lr r9, [status32_l2]
st.a r9, [sp, -4]
st.a lp_count, [sp, -4]
lr r9, [lp_end]
st.a r9, [sp, -4]
lr r9, [lp_start]
st.a r9, [sp, -4]
lr r9, [bta_l2]
st.a r9, [sp, -4]
#ifdef PT_REGS_CANARY
mov r9, 0xdeadbee2
st r9, [sp, -4]
#endif
/* move up by 1 word to "create" pt_regs->"stack_place_holder" */
sub sp, sp, 4
SAVE_R0_TO_R12
PUSH gp
PUSH fp
PUSH blink
PUSH ilink2
PUSHAX status32_l2
PUSH lp_count
PUSHAX lp_end
PUSHAX lp_start
PUSHAX bta_l2
.endm
/*--------------------------------------------------------------
......@@ -595,52 +507,41 @@
*-------------------------------------------------------------*/
.macro RESTORE_ALL_INT1
add sp, sp, 4 /* hop over unused "pt_regs->stack_place_holder" */
ld.ab r9, [sp, 4] /* Actual reg file */
sr r9, [bta_l1]
ld.ab r9, [sp, 4]
sr r9, [lp_start]
ld.ab r9, [sp, 4]
sr r9, [lp_end]
ld.ab r9, [sp, 4]
mov lp_count, r9
ld.ab r9, [sp, 4]
sr r9, [status32_l1]
ld.ab r9, [sp, 4]
mov ilink1, r9
ld.ab blink, [sp, 4]
ld.ab fp, [sp, 4]
ld.ab r26, [sp, 4] /* gp */
RESTORE_CALLER_SAVED
POPAX bta_l1
POPAX lp_start
POPAX lp_end
POP r9
mov lp_count, r9 ;LD to lp_count is not allowed
POPAX status32_l1
POP ilink1
POP blink
POP fp
POP gp
RESTORE_R12_TO_R0
ld sp, [sp] /* restore original sp */
/* orig_r0 and orig_r8 skipped automatically */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm
.macro RESTORE_ALL_INT2
add sp, sp, 4 /* hop over unused "pt_regs->stack_place_holder" */
ld.ab r9, [sp, 4]
sr r9, [bta_l2]
ld.ab r9, [sp, 4]
sr r9, [lp_start]
ld.ab r9, [sp, 4]
sr r9, [lp_end]
ld.ab r9, [sp, 4]
mov lp_count, r9
ld.ab r9, [sp, 4]
sr r9, [status32_l2]
ld.ab r9, [sp, 4]
mov ilink2, r9
ld.ab blink, [sp, 4]
ld.ab fp, [sp, 4]
ld.ab r26, [sp, 4] /* gp */
RESTORE_CALLER_SAVED
POPAX bta_l2
POPAX lp_start
POPAX lp_end
ld sp, [sp] /* restore original sp */
/* orig_r0 and orig_r8 skipped automatically */
POP r9
mov lp_count, r9 ;LD to lp_count is not allowed
POPAX status32_l2
POP ilink2
POP blink
POP fp
POP gp
RESTORE_R12_TO_R0
ld sp, [sp] /* restore original sp */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm
......
arch/arc/include/asm/irq.h
View file @ 76d3f4c2
......@@ -21,6 +21,6 @@
extern void __init arc_init_IRQ(void);
extern int __init get_hw_config_num_irq(void);
void __cpuinit arc_local_timer_setup(unsigned int cpu);
void arc_local_timer_setup(unsigned int cpu);
#endif
arch/arc/include/asm/irqflags.h
View file @ 76d3f4c2
......@@ -19,6 +19,26 @@
#include <asm/arcregs.h>
/* status32 Reg bits related to Interrupt Handling */
#define STATUS_E1_BIT 1 /* Int 1 enable */
#define STATUS_E2_BIT 2 /* Int 2 enable */
#define STATUS_A1_BIT 3 /* Int 1 active */
#define STATUS_A2_BIT 4 /* Int 2 active */
#define STATUS_E1_MASK (1<<STATUS_E1_BIT)
#define STATUS_E2_MASK (1<<STATUS_E2_BIT)
#define STATUS_A1_MASK (1<<STATUS_A1_BIT)
#define STATUS_A2_MASK (1<<STATUS_A2_BIT)
/* Other Interrupt Handling related Aux regs */
#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */
#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */
#define AUX_IRQ_LV12 0x43 /* interrupt level register */
#define AUX_IENABLE 0x40c
#define AUX_ITRIGGER 0x40d
#define AUX_IPULSE 0x415
#ifndef __ASSEMBLY__
/******************************************************************
......
arch/arc/include/asm/kgdb.h
View file @ 76d3f4c2
......@@ -31,7 +31,7 @@ static inline void arch_kgdb_breakpoint(void)
__asm__ __volatile__ ("trap_s 0x4\n");
}
extern void kgdb_trap(struct pt_regs *regs, int param);
extern void kgdb_trap(struct pt_regs *regs);
enum arc700_linux_regnums {
_R0 = 0,
......@@ -53,7 +53,7 @@ enum arc700_linux_regnums {
};
#else
#define kgdb_trap(regs, param)
#define kgdb_trap(regs)
#endif
#endif /* __ARC_KGDB_H__ */
arch/arc/include/asm/kprobes.h
View file @ 76d3f4c2
......@@ -50,11 +50,9 @@ struct kprobe_ctlblk {
int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
void kretprobe_trampoline(void);
void trap_is_kprobe(unsigned long cause, unsigned long address,
struct pt_regs *regs);
void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
#else
static void trap_is_kprobe(unsigned long cause, unsigned long address,
struct pt_regs *regs)
static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
{
}
#endif
......
arch/arc/include/asm/mmu.h
View file @ 76d3f4c2
......@@ -9,6 +9,40 @@
#ifndef _ASM_ARC_MMU_H
#define _ASM_ARC_MMU_H
#if defined(CONFIG_ARC_MMU_V1)
#define CONFIG_ARC_MMU_VER 1
#elif defined(CONFIG_ARC_MMU_V2)
#define CONFIG_ARC_MMU_VER 2
#elif defined(CONFIG_ARC_MMU_V3)
#define CONFIG_ARC_MMU_VER 3
#endif
/* MMU Management regs */
#define ARC_REG_MMU_BCR 0x06f
#define ARC_REG_TLBPD0 0x405
#define ARC_REG_TLBPD1 0x406
#define ARC_REG_TLBINDEX 0x407
#define ARC_REG_TLBCOMMAND 0x408
#define ARC_REG_PID 0x409
#define ARC_REG_SCRATCH_DATA0 0x418
/* Bits in MMU PID register */
#define MMU_ENABLE (1 << 31) /* Enable MMU for process */
/* Error code if probe fails */
#define TLB_LKUP_ERR 0x80000000
/* TLB Commands */
#define TLBWrite 0x1
#define TLBRead 0x2
#define TLBGetIndex 0x3
#define TLBProbe 0x4
#if (CONFIG_ARC_MMU_VER >= 2)
#define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */
#define TLBIVUTLB 0x6 /* explicitly inv uTLBs */
#endif
#ifndef __ASSEMBLY__
typedef struct {
......@@ -18,6 +52,16 @@ typedef struct {
#endif
} mm_context_t;
#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
void tlb_paranoid_check(unsigned int pid_sw, unsigned long address);
#else
#define tlb_paranoid_check(a, b)
#endif
void arc_mmu_init(void);
extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
void __init read_decode_mmu_bcr(void);
#endif /* !__ASSEMBLY__ */
#endif
arch/arc/include/asm/page.h
View file @ 76d3f4c2
......@@ -96,13 +96,8 @@ typedef unsigned long pgtable_t;
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
/* Default Permissions for page, used in mmap.c */
#ifdef CONFIG_ARC_STACK_NONEXEC
/* Default Permissions for stack/heaps pages (Non Executable) */
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE)
#else
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
#endif
#define WANT_PAGE_VIRTUAL 1
......
arch/arc/include/asm/pgtable.h
View file @ 76d3f4c2
......@@ -135,6 +135,12 @@
/* ioremap */
#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
/* Masks for actual TLB "PD"s */
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT)
#define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \
_PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
/**************************************************************************
* Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
*
......
arch/arc/include/asm/processor.h
View file @ 76d3f4c2
......@@ -19,6 +19,7 @@
#ifndef __ASSEMBLY__
#include <asm/arcregs.h> /* for STATUS_E1_MASK et all */
#include <asm/ptrace.h>
/* Arch specific stuff which needs to be saved per task.
* However these items are not so important so as to earn a place in
......@@ -28,10 +29,6 @@ struct thread_struct {
unsigned long ksp; /* kernel mode stack pointer */
unsigned long callee_reg; /* pointer to callee regs */
unsigned long fault_address; /* dbls as brkpt holder as well */
unsigned long cause_code; /* Exception Cause Code (ECR) */
#ifdef CONFIG_ARC_CURR_IN_REG
unsigned long user_r25;
#endif
#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
struct arc_fpu fpu;
#endif
......@@ -50,7 +47,7 @@ struct task_struct;
unsigned long thread_saved_pc(struct task_struct *t);
#define task_pt_regs(p) \
((struct pt_regs *)(THREAD_SIZE - 4 + (void *)task_stack_page(p)) - 1)
((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while (0)
......@@ -75,11 +72,15 @@ unsigned long thread_saved_pc(struct task_struct *t);
/*
* Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
* These can't be derived from pt_regs as that would give correp user-mode val
* Look in process.c for details of kernel stack layout
*/
#define KSTK_ESP(tsk) (tsk->thread.ksp)
#define KSTK_BLINK(tsk) (*((unsigned int *)((KSTK_ESP(tsk)) + (13+1+1)*4)))
#define KSTK_FP(tsk) (*((unsigned int *)((KSTK_ESP(tsk)) + (13+1)*4)))
#define KSTK_REG(tsk, off) (*((unsigned int *)(KSTK_ESP(tsk) + \
sizeof(struct callee_regs) + off)))
#define KSTK_BLINK(tsk) KSTK_REG(tsk, 4)
#define KSTK_FP(tsk) KSTK_REG(tsk, 0)
/*
* Do necessary setup to start up a newly executed thread.
......
arch/arc/include/asm/ptrace.h
View file @ 76d3f4c2
......@@ -17,12 +17,6 @@
/* THE pt_regs: Defines how regs are saved during entry into kernel */
struct pt_regs {
/*
* 1 word gutter after reg-file has been saved
* Technically not needed, Since SP always points to a "full" location
* (vs. "empty"). But pt_regs is shared with tools....
*/
long res;
/* Real registers */
long bta; /* bta_l1, bta_l2, erbta */
......@@ -50,22 +44,32 @@ struct pt_regs {
long sp; /* user/kernel sp depending on where we came from */
long orig_r0;
/*to distinguish bet excp, syscall, irq */
/*
* To distinguish bet excp, syscall, irq
* For traps and exceptions, Exception Cause Register.
* ECR: <00> <VV> <CC> <PP>
* Last word used by Linux for extra state mgmt (syscall-restart)
* For interrupts, use artificial ECR values to note current prio-level
*/
union {
struct {
#ifdef CONFIG_CPU_BIG_ENDIAN
/* so that assembly code is same for LE/BE */
unsigned long orig_r8:16, event:16;
unsigned long state:8, ecr_vec:8,
ecr_cause:8, ecr_param:8;
#else
unsigned long event:16, orig_r8:16;
unsigned long ecr_param:8, ecr_cause:8,
ecr_vec:8, state:8;
#endif
long orig_r8_word;
};
unsigned long event;
};
long user_r25;
};
/* Callee saved registers - need to be saved only when you are scheduled out */
struct callee_regs {
long res; /* Again this is not needed */
long r25;
long r24;
long r23;
......@@ -99,18 +103,20 @@ struct callee_regs {
/* return 1 if PC in delay slot */
#define delay_mode(regs) ((regs->status32 & STATUS_DE_MASK) == STATUS_DE_MASK)
#define in_syscall(regs) (regs->event & orig_r8_IS_SCALL)
#define in_brkpt_trap(regs) (regs->event & orig_r8_IS_BRKPT)
#define in_syscall(regs) ((regs->ecr_vec == ECR_V_TRAP) && !regs->ecr_param)
#define in_brkpt_trap(regs) ((regs->ecr_vec == ECR_V_TRAP) && regs->ecr_param)
#define syscall_wont_restart(regs) (regs->event |= orig_r8_IS_SCALL_RESTARTED)
#define syscall_restartable(regs) !(regs->event & orig_r8_IS_SCALL_RESTARTED)
#define STATE_SCALL_RESTARTED 0x01
#define syscall_wont_restart(reg) (reg->state |= STATE_SCALL_RESTARTED)
#define syscall_restartable(reg) !(reg->state & STATE_SCALL_RESTARTED)
#define current_pt_regs() \
({ \
/* open-coded current_thread_info() */ \
register unsigned long sp asm ("sp"); \
unsigned long pg_start = (sp & ~(THREAD_SIZE - 1)); \
(struct pt_regs *)(pg_start + THREAD_SIZE - 4) - 1; \
(struct pt_regs *)(pg_start + THREAD_SIZE) - 1; \
})
static inline long regs_return_value(struct pt_regs *regs)
......@@ -120,11 +126,4 @@ static inline long regs_return_value(struct pt_regs *regs)
#endif /* !__ASSEMBLY__ */
#define orig_r8_IS_SCALL 0x0001
#define orig_r8_IS_SCALL_RESTARTED 0x0002
#define orig_r8_IS_BRKPT 0x0004
#define orig_r8_IS_EXCPN 0x0008
#define orig_r8_IS_IRQ1 0x0010
#define orig_r8_IS_IRQ2 0x0020
#endif /* __ASM_PTRACE_H */
arch/arc/include/asm/syscall.h
View file @ 76d3f4c2
......@@ -18,7 +18,7 @@ static inline long
syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
{
if (user_mode(regs) && in_syscall(regs))
return regs->orig_r8;
return regs->r8;
else
return -1;
}
......@@ -26,8 +26,7 @@ syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
static inline void
syscall_rollback(struct task_struct *task, struct pt_regs *regs)
{
/* XXX: I can't fathom how pt_regs->r8 will be clobbered ? */
regs->r8 = regs->orig_r8;
regs->r0 = regs->orig_r0;
}
static inline long
......
arch/arc/include/asm/tlb-mmu1.h
View file @ 76d3f4c2
......@@ -9,9 +9,9 @@
#ifndef __ASM_TLB_MMU_V1_H__
#define __ASM_TLB_MMU_V1_H__
#if defined(__ASSEMBLY__) && defined(CONFIG_ARC_MMU_VER == 1)
#include <asm/mmu.h>
#include <asm/tlb.h>
#if defined(__ASSEMBLY__) && (CONFIG_ARC_MMU_VER == 1)
.macro TLB_WRITE_HEURISTICS
......
arch/arc/include/asm/tlb.h
View file @ 76d3f4c2
......@@ -9,18 +9,6 @@
#ifndef _ASM_ARC_TLB_H
#define _ASM_ARC_TLB_H
#ifdef __KERNEL__
#include <asm/pgtable.h>
/* Masks for actual TLB "PD"s */
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT)
#define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \
_PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
#ifndef __ASSEMBLY__
#define tlb_flush(tlb) \
do { \
if (tlb->fullmm) \
......@@ -56,18 +44,4 @@ do { \
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
void tlb_paranoid_check(unsigned int pid_sw, unsigned long address);
#else
#define tlb_paranoid_check(a, b)
#endif
void arc_mmu_init(void);
extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
void __init read_decode_mmu_bcr(void);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_ARC_TLB_H */
arch/arc/include/asm/unaligned.h
View file @ 76d3f4c2
......@@ -16,11 +16,11 @@
#ifdef CONFIG_ARC_MISALIGN_ACCESS
int misaligned_fixup(unsigned long address, struct pt_regs *regs,
unsigned long cause, struct callee_regs *cregs);
struct callee_regs *cregs);
#else
static inline int
misaligned_fixup(unsigned long address, struct pt_regs *regs,
unsigned long cause, struct callee_regs *cregs)
struct callee_regs *cregs)
{
return 0;
}
......
arch/arc/include/uapi/asm/ptrace.h
View file @ 76d3f4c2
......@@ -20,28 +20,31 @@
*
* This is to decouple pt_regs from user-space ABI, to be able to change it
* w/o affecting the ABI.
* Although the layout (initial padding) is similar to pt_regs to have some
* optimizations when copying pt_regs to/from user_regs_struct.
*
* The intermediate pad,pad2 are relics of initial layout based on pt_regs
* for optimizations when copying pt_regs to/from user_regs_struct.
* We no longer need them, but can't be changed as they are part of ABI now.
*
* Also, sigcontext only care about the scratch regs as that is what we really
* save/restore for signal handling.
* save/restore for signal handling. However gdb also uses the same struct
* hence callee regs need to be in there too.
*/
struct user_regs_struct {
struct {
long pad;
struct {
long bta, lp_start, lp_end, lp_count;
long status32, ret, blink, fp, gp;
long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
long sp;
} scratch;
long pad2;
struct {
long pad;
long r25, r24, r23, r22, r21, r20;
long r19, r18, r17, r16, r15, r14, r13;
} callee;
long efa; /* break pt addr, for break points in delay slots */
long stop_pc; /* give dbg stop_pc directly after checking orig_r8 */
long stop_pc; /* give dbg stop_pc after ensuring brkpt trap */
};
#endif /* !__ASSEMBLY__ */
......
arch/arc/kernel/asm-offsets.c
View file @ 76d3f4c2
......@@ -24,9 +24,6 @@ int main(void)
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg));
#ifdef CONFIG_ARC_CURR_IN_REG
DEFINE(THREAD_USER_R25, offsetof(struct thread_struct, user_r25));
#endif
DEFINE(THREAD_FAULT_ADDR,
offsetof(struct thread_struct, fault_address));
......@@ -49,7 +46,7 @@ int main(void)
BLANK();
DEFINE(PT_status32, offsetof(struct pt_regs, status32));
DEFINE(PT_orig_r8, offsetof(struct pt_regs, orig_r8_word));
DEFINE(PT_event, offsetof(struct pt_regs, event));
DEFINE(PT_sp, offsetof(struct pt_regs, sp));
DEFINE(PT_r0, offsetof(struct pt_regs, r0));
DEFINE(PT_r1, offsetof(struct pt_regs, r1));
......@@ -60,5 +57,7 @@ int main(void)
DEFINE(PT_r6, offsetof(struct pt_regs, r6));
DEFINE(PT_r7, offsetof(struct pt_regs, r7));
DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
return 0;
}
arch/arc/kernel/ctx_sw.c
View file @ 76d3f4c2
......@@ -23,10 +23,6 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
unsigned int tmp;
unsigned int prev = (unsigned int)prev_task;
unsigned int next = (unsigned int)next_task;
int num_words_to_skip = 1;
#ifdef CONFIG_ARC_CURR_IN_REG
num_words_to_skip++;
#endif
__asm__ __volatile__(
/* FP/BLINK save generated by gcc (standard function prologue */
......@@ -44,8 +40,9 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
"st.a r24, [sp, -4] \n\t"
#ifndef CONFIG_ARC_CURR_IN_REG
"st.a r25, [sp, -4] \n\t"
#else
"sub sp, sp, 4 \n\t" /* usual r25 placeholder */
#endif
"sub sp, sp, %4 \n\t" /* create gutter at top */
/* set ksp of outgoing task in tsk->thread.ksp */
"st.as sp, [%3, %1] \n\t"
......@@ -76,10 +73,10 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
/* start loading it's CALLEE reg file */
"add sp, sp, %4 \n\t" /* skip gutter at top */
#ifndef CONFIG_ARC_CURR_IN_REG
"ld.ab r25, [sp, 4] \n\t"
#else
"add sp, sp, 4 \n\t"
#endif
"ld.ab r24, [sp, 4] \n\t"
"ld.ab r23, [sp, 4] \n\t"
......@@ -100,8 +97,7 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
/* FP/BLINK restore generated by gcc (standard func epilogue */
: "=r"(tmp)
: "n"((TASK_THREAD + THREAD_KSP) / 4), "r"(next), "r"(prev),
"n"(num_words_to_skip * 4)
: "n"((TASK_THREAD + THREAD_KSP) / 4), "r"(next), "r"(prev)
: "blink"
);
......
arch/arc/kernel/entry.S
View file @ 76d3f4c2
......@@ -142,7 +142,7 @@ VECTOR reserved ; Reserved Exceptions
.endr
#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */
#include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,TRAP...} */
#include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,SYS...} */
#include <asm/errno.h>
#include <asm/arcregs.h>
#include <asm/irqflags.h>
......@@ -274,10 +274,8 @@ ARC_ENTRY instr_service
SWITCH_TO_KERNEL_STK
SAVE_ALL_SYS
lr r0, [ecr]
lr r1, [efa]
mov r2, sp
lr r0, [efa]
mov r1, sp
FAKE_RET_FROM_EXCPN r9
......@@ -298,9 +296,8 @@ ARC_ENTRY mem_service
SWITCH_TO_KERNEL_STK
SAVE_ALL_SYS
lr r0, [ecr]
lr r1, [efa]
mov r2, sp
lr r0, [efa]
mov r1, sp
bl do_memory_error
b ret_from_exception
ARC_EXIT mem_service
......@@ -317,11 +314,14 @@ ARC_ENTRY EV_MachineCheck
SWITCH_TO_KERNEL_STK
SAVE_ALL_SYS
lr r0, [ecr]
lr r1, [efa]
mov r2, sp
lr r2, [ecr]
lr r0, [efa]
mov r1, sp
lsr r3, r2, 8
bmsk r3, r3, 7
brne r3, ECR_C_MCHK_DUP_TLB, 1f
brne r0, 0x200100, 1f
bl do_tlb_overlap_fault
b ret_from_exception
......@@ -355,8 +355,8 @@ ARC_ENTRY EV_TLBProtV
; ecr and efa were not saved in case an Intr sneaks in
; after fake rtie
;
lr r3, [ecr]
lr r4, [efa]
lr r2, [ecr]
lr r1, [efa] ; Faulting Data address
; --------(4) Return from CPU Exception Mode ---------
; Fake a rtie, but rtie to next label
......@@ -368,31 +368,25 @@ ARC_ENTRY EV_TLBProtV
;------ (5) Type of Protection Violation? ----------
;
; ProtV Hardware Exception is triggered for Access Faults of 2 types
; -Access Violaton (WRITE to READ ONLY Page) - for linux COW
; -Unaligned Access (READ/WRITE on odd boundary)
; -Access Violaton : 00_23_(00|01|02|03)_00
; x r w r+w
; -Unaligned Access : 00_23_04_00
;
cmp r3, 0x230400 ; Misaligned data access ?
beq 4f
bbit1 r2, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
;========= (6a) Access Violation Processing ========
cmp r3, 0x230100
mov r1, 0x0 ; if LD exception ? write = 0
mov.ne r1, 0x1 ; else write = 1
mov r2, r4 ; faulting address
mov r0, sp ; pt_regs
bl do_page_fault
b ret_from_exception
;========== (6b) Non aligned access ============
4:
mov r0, r3 ; cause code
mov r1, r4 ; faulting address
mov r2, sp ; pt_regs
mov r0, r1
mov r1, sp ; pt_regs
#ifdef CONFIG_ARC_MISALIGN_ACCESS
SAVE_CALLEE_SAVED_USER
mov r3, sp ; callee_regs
mov r2, sp ; callee_regs
bl do_misaligned_access
......@@ -419,9 +413,8 @@ ARC_ENTRY EV_PrivilegeV
SWITCH_TO_KERNEL_STK
SAVE_ALL_SYS
lr r0, [ecr]
lr r1, [efa]
mov r2, sp
lr r0, [efa]
mov r1, sp
FAKE_RET_FROM_EXCPN r9
......@@ -440,9 +433,8 @@ ARC_ENTRY EV_Extension
SWITCH_TO_KERNEL_STK
SAVE_ALL_SYS
lr r0, [ecr]
lr r1, [efa]
mov r2, sp
lr r0, [efa]
mov r1, sp
bl do_extension_fault
b ret_from_exception
ARC_EXIT EV_Extension
......@@ -498,11 +490,8 @@ tracesys_exit:
trap_with_param:
; stop_pc info by gdb needs this info
stw orig_r8_IS_BRKPT, [sp, PT_orig_r8]
mov r0, r12
lr r1, [efa]
mov r2, sp
lr r0, [efa]
mov r1, sp
; Now that we have read EFA, its safe to do "fake" rtie
; and get out of CPU exception mode
......@@ -544,11 +533,11 @@ ARC_ENTRY EV_Trap
lr r9, [erstatus]
SWITCH_TO_KERNEL_STK
SAVE_ALL_TRAP
SAVE_ALL_SYS
;------- (4) What caused the Trap --------------
lr r12, [ecr]
and.f 0, r12, ECR_PARAM_MASK
bmsk.f 0, r12, 7
bnz trap_with_param
; ======= (5a) Trap is due to System Call ========
......@@ -589,11 +578,7 @@ ARC_ENTRY ret_from_exception
; Pre-{IRQ,Trap,Exception} K/U mode from pt_regs->status32
ld r8, [sp, PT_status32] ; returning to User/Kernel Mode
#ifdef CONFIG_PREEMPT
bbit0 r8, STATUS_U_BIT, resume_kernel_mode
#else
bbit0 r8, STATUS_U_BIT, restore_regs
#endif
; Before returning to User mode check-for-and-complete any pending work
; such as rescheduling/signal-delivery etc.
......@@ -653,10 +638,10 @@ resume_user_mode_begin:
b resume_user_mode_begin ; unconditionally back to U mode ret chks
; for single exit point from this block
#ifdef CONFIG_PREEMPT
resume_kernel_mode:
#ifdef CONFIG_PREEMPT
; Can't preempt if preemption disabled
GET_CURR_THR_INFO_FROM_SP r10
ld r8, [r10, THREAD_INFO_PREEMPT_COUNT]
......@@ -687,17 +672,6 @@ restore_regs :
; XXX can this be optimised out
IRQ_DISABLE_SAVE r9, r10 ;@r10 has prisitine (pre-disable) copy
#ifdef CONFIG_ARC_CURR_IN_REG
; Restore User R25
; Earlier this used to be only for returning to user mode
; However with 2 levels of IRQ this can also happen even if
; in kernel mode
ld r9, [sp, PT_sp]
brhs r9, VMALLOC_START, 8f
RESTORE_USER_R25
8:
#endif
; Restore REG File. In case multiple Events outstanding,
; use the same priorty as rtie: EXCPN, L2 IRQ, L1 IRQ, None
; Note that we use realtime STATUS32 (not pt_regs->status32) to
......@@ -714,8 +688,17 @@ not_exception:
#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
; Level 2 interrupt return Path - from hardware standpoint
bbit0 r10, STATUS_A2_BIT, not_level2_interrupt
;------------------------------------------------------------------
; However the context returning might not have taken L2 intr itself
; e.g. Task'A' user-code -> L2 intr -> schedule -> 'B' user-code ret
; Special considerations needed for the context which took L2 intr
ld r9, [sp, PT_event] ; Ensure this is L2 intr context
brne r9, event_IRQ2, 149f
;------------------------------------------------------------------
; if L2 IRQ interrupted a L1 ISR, we'd disbaled preemption earlier
; so that sched doesnt move to new task, causing L1 to be delayed
......@@ -723,19 +706,15 @@ not_exception:
; things to what they were, before returning from L2 context
;----------------------------------------------------------------
ldw r9, [sp, PT_orig_r8] ; get orig_r8 to make sure it is
brne r9, orig_r8_IS_IRQ2, 149f ; infact a L2 ISR ret path
ld r9, [sp, PT_status32] ; get statu32_l2 (saved in pt_regs)
bbit0 r9, STATUS_A1_BIT, 149f ; L1 not active when L2 IRQ, so normal
; A1 is set in status32_l2
; decrement thread_info->preempt_count (re-enable preemption)
GET_CURR_THR_INFO_FROM_SP r10
ld r9, [r10, THREAD_INFO_PREEMPT_COUNT]
; paranoid check, given A1 was active when A2 happened, preempt count
; must not be 0 beccause we would have incremented it.
; must not be 0 because we would have incremented it.
; If this does happen we simply HALT as it means a BUG !!!
cmp r9, 0
bnz 2f
......
arch/arc/kernel/head.S
View file @ 76d3f4c2
......@@ -27,6 +27,8 @@ stext:
; Don't clobber r0-r4 yet. It might have bootloader provided info
;-------------------------------------------------------------------
sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE]
#ifdef CONFIG_SMP
; Only Boot (Master) proceeds. Others wait in platform dependent way
; IDENTITY Reg [ 3 2 1 0 ]
......
arch/arc/kernel/irq.c
View file @ 76d3f4c2
......@@ -28,25 +28,17 @@
* -Disable all IRQs (on CPU side)
* -Optionally, setup the High priority Interrupts as Level 2 IRQs
*/
void __cpuinit arc_init_IRQ(void)
void arc_init_IRQ(void)
{
int level_mask = 0;
write_aux_reg(AUX_INTR_VEC_BASE, _int_vec_base_lds);
/* Disable all IRQs: enable them as devices request */
write_aux_reg(AUX_IENABLE, 0);
/* setup any high priority Interrupts (Level2 in ARCompact jargon) */
#ifdef CONFIG_ARC_IRQ3_LV2
level_mask |= (1 << 3);
#endif
#ifdef CONFIG_ARC_IRQ5_LV2
level_mask |= (1 << 5);
#endif
#ifdef CONFIG_ARC_IRQ6_LV2
level_mask |= (1 << 6);
#endif
level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3;
level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5;
level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6;
if (level_mask) {
pr_info("Level-2 interrupts bitset %x\n", level_mask);
......
arch/arc/kernel/kgdb.c
View file @ 76d3f4c2
......@@ -169,7 +169,7 @@ int kgdb_arch_init(void)
return 0;
}
void kgdb_trap(struct pt_regs *regs, int param)
void kgdb_trap(struct pt_regs *regs)
{
/* trap_s 3 is used for breakpoints that overwrite existing
* instructions, while trap_s 4 is used for compiled breakpoints.
......@@ -181,7 +181,7 @@ void kgdb_trap(struct pt_regs *regs, int param)
* with trap_s 4 (compiled) breakpoints, continuation needs to
* start after the breakpoint.
*/
if (param == 3)
if (regs->ecr_param == 3)
instruction_pointer(regs) -= BREAK_INSTR_SIZE;
kgdb_handle_exception(1, SIGTRAP, 0, regs);
......
arch/arc/kernel/kprobes.c
View file @ 76d3f4c2
......@@ -517,8 +517,7 @@ int __kprobes arch_trampoline_kprobe(struct kprobe *p)
return 0;
}
void trap_is_kprobe(unsigned long cause, unsigned long address,
struct pt_regs *regs)
void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
{
notify_die(DIE_TRAP, "kprobe_trap", regs, address, cause, SIGTRAP);
notify_die(DIE_TRAP, "kprobe_trap", regs, address, 0, SIGTRAP);
}
arch/arc/kernel/process.c
View file @ 76d3f4c2
......@@ -55,10 +55,8 @@ asmlinkage void ret_from_fork(void);
* | ... |
* | unused |
* | |
* ------------------ <==== top of Stack (thread.ksp)
* | UNUSED 1 word|
* ------------------
* | r25 |
* | r25 | <==== top of Stack (thread.ksp)
* ~ ~
* | --to-- | (CALLEE Regs of user mode)
* | r13 |
......@@ -76,7 +74,10 @@ asmlinkage void ret_from_fork(void);
* | --to-- | (scratch Regs of user mode)
* | r0 |
* ------------------
* | UNUSED 1 word|
* | SP |
* | orig_r0 |
* | event/ECR |
* | user_r25 |
* ------------------ <===== END of PAGE
*/
int copy_thread(unsigned long clone_flags,
......
arch/arc/kernel/ptrace.c
View file @ 76d3f4c2
......@@ -40,7 +40,15 @@ static int genregs_get(struct task_struct *target,
offsetof(struct user_regs_struct, LOC), \
offsetof(struct user_regs_struct, LOC) + 4);
#define REG_O_ZERO(LOC) \
if (!ret) \
ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, \
offsetof(struct user_regs_struct, LOC), \
offsetof(struct user_regs_struct, LOC) + 4);
REG_O_ZERO(pad);
REG_O_CHUNK(scratch, callee, ptregs);
REG_O_ZERO(pad2);
REG_O_CHUNK(callee, efa, cregs);
REG_O_CHUNK(efa, stop_pc, &target->thread.fault_address);
......@@ -88,8 +96,10 @@ static int genregs_set(struct task_struct *target,
offsetof(struct user_regs_struct, LOC), \
offsetof(struct user_regs_struct, LOC) + 4);
/* TBD: disallow updates to STATUS32, orig_r8 etc*/
REG_IN_CHUNK(scratch, callee, ptregs); /* pt_regs[bta..orig_r8] */
REG_IGNORE_ONE(pad);
/* TBD: disallow updates to STATUS32 etc*/
REG_IN_CHUNK(scratch, pad2, ptregs); /* pt_regs[bta..sp] */
REG_IGNORE_ONE(pad2);
REG_IN_CHUNK(callee, efa, cregs); /* callee_regs[r25..r13] */
REG_IGNORE_ONE(efa); /* efa update invalid */
REG_IN_ONE(stop_pc, &ptregs->ret); /* stop_pc: PC update */
......
arch/arc/kernel/setup.c
View file @ 76d3f4c2
......@@ -31,14 +31,14 @@
int running_on_hw = 1; /* vs. on ISS */
char __initdata command_line[COMMAND_LINE_SIZE];
struct machine_desc *machine_desc __cpuinitdata;
struct machine_desc *machine_desc;
struct task_struct *_current_task[NR_CPUS]; /* For stack switching */
struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
void __cpuinit read_arc_build_cfg_regs(void)
void read_arc_build_cfg_regs(void)
{
struct bcr_perip uncached_space;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
......@@ -182,7 +182,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
FIX_PTR(cpu);
#define IS_AVAIL1(var, str) ((var) ? str : "")
#define IS_AVAIL2(var, str) ((var == 0x2) ? str : "")
#define IS_USED(var) ((var) ? "(in-use)" : "(not used)")
#define IS_USED(cfg) (IS_ENABLED(cfg) ? "(in-use)" : "(not used)")
n += scnprintf(buf + n, len - n,
"Extn [700-Base]\t: %s %s %s %s %s %s\n",
......@@ -202,9 +202,9 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
if (cpu->core.family == 0x34) {
n += scnprintf(buf + n, len - n,
"Extn [700-4.10]\t: LLOCK/SCOND %s, SWAPE %s, RTSC %s\n",
IS_USED(__CONFIG_ARC_HAS_LLSC_VAL),
IS_USED(__CONFIG_ARC_HAS_SWAPE_VAL),
IS_USED(__CONFIG_ARC_HAS_RTSC_VAL));
IS_USED(CONFIG_ARC_HAS_LLSC),
IS_USED(CONFIG_ARC_HAS_SWAPE),
IS_USED(CONFIG_ARC_HAS_RTSC));
}
n += scnprintf(buf + n, len - n, "Extn [CCM]\t: %s",
......@@ -237,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
return buf;
}
void __cpuinit arc_chk_ccms(void)
void arc_chk_ccms(void)
{
#if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
......@@ -272,7 +272,7 @@ void __cpuinit arc_chk_ccms(void)
* hardware has dedicated regs which need to be saved/restored on ctx-sw
* (Single Precision uses core regs), thus kernel is kind of oblivious to it
*/
void __cpuinit arc_chk_fpu(void)
void arc_chk_fpu(void)
{
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
......@@ -293,7 +293,7 @@ void __cpuinit arc_chk_fpu(void)
* such as only for boot CPU etc
*/
void __cpuinit setup_processor(void)
void setup_processor(void)
{
char str[512];
int cpu_id = smp_processor_id();
......
arch/arc/kernel/smp.c
View file @ 76d3f4c2
......@@ -117,7 +117,7 @@ const char *arc_platform_smp_cpuinfo(void)
* Called from asm stub in head.S
* "current"/R25 already setup by low level boot code
*/
void __cpuinit start_kernel_secondary(void)
void start_kernel_secondary(void)
{
struct mm_struct *mm = &init_mm;
unsigned int cpu = smp_processor_id();
......@@ -154,7 +154,7 @@ void __cpuinit start_kernel_secondary(void)
*
* Essential requirements being where to run from (PC) and stack (SP)
*/
int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
int __cpu_up(unsigned int cpu, struct task_struct *idle)
{
unsigned long wait_till;
......
arch/arc/kernel/stacktrace.c
View file @ 76d3f4c2
......@@ -79,7 +79,7 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
* assembly code
*/
frame_info->regs.r27 = 0;
frame_info->regs.r28 += 64;
frame_info->regs.r28 += 60;
frame_info->call_frame = 0;
} else {
......
arch/arc/kernel/time.c
View file @ 76d3f4c2
......@@ -44,13 +44,24 @@
#include <asm/clk.h>
#include <asm/mach_desc.h>
/* Timer related Aux registers */
#define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
#define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
#define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */
#define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */
#define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */
#define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
#define TIMER_CTRL_IE (1 << 0) /* Interupt when Count reachs limit */
#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
#define ARC_TIMER_MAX 0xFFFFFFFF
/********** Clock Source Device *********/
#ifdef CONFIG_ARC_HAS_RTSC
int __cpuinit arc_counter_setup(void)
int arc_counter_setup(void)
{
/* RTSC insn taps into cpu clk, needs no setup */
......@@ -105,7 +116,7 @@ static bool is_usable_as_clocksource(void)
/*
* set 32bit TIMER1 to keep counting monotonically and wraparound
*/
int __cpuinit arc_counter_setup(void)
int arc_counter_setup(void)
{
write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
write_aux_reg(ARC_REG_TIMER1_CNT, 0);
......@@ -212,7 +223,7 @@ static struct irqaction arc_timer_irq = {
* Setup the local event timer for @cpu
* N.B. weak so that some exotic ARC SoCs can completely override it
*/
void __attribute__((weak)) __cpuinit arc_local_timer_setup(unsigned int cpu)
void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
{
struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
......
arch/arc/kernel/traps.c
View file @ 76d3f4c2
......@@ -28,10 +28,9 @@ void __init trap_init(void)
return;
}
void die(const char *str, struct pt_regs *regs, unsigned long address,
unsigned long cause_reg)
void die(const char *str, struct pt_regs *regs, unsigned long address)
{
show_kernel_fault_diag(str, regs, address, cause_reg);
show_kernel_fault_diag(str, regs, address);
/* DEAD END */
__asm__("flag 1");
......@@ -42,14 +41,13 @@ void die(const char *str, struct pt_regs *regs, unsigned long address,
* -for user faults enqueues requested signal
* -for kernel, chk if due to copy_(to|from)_user, otherwise die()
*/
static noinline int handle_exception(unsigned long cause, char *str,
struct pt_regs *regs, siginfo_t *info)
static noinline int
handle_exception(const char *str, struct pt_regs *regs, siginfo_t *info)
{
if (user_mode(regs)) {
struct task_struct *tsk = current;
tsk->thread.fault_address = (__force unsigned int)info->si_addr;
tsk->thread.cause_code = cause;
force_sig_info(info->si_signo, info, tsk);
......@@ -58,14 +56,14 @@ static noinline int handle_exception(unsigned long cause, char *str,
if (fixup_exception(regs))
return 0;
die(str, regs, (unsigned long)info->si_addr, cause);
die(str, regs, (unsigned long)info->si_addr);
}
return 1;
}
#define DO_ERROR_INFO(signr, str, name, sicode) \
int name(unsigned long cause, unsigned long address, struct pt_regs *regs) \
int name(unsigned long address, struct pt_regs *regs) \
{ \
siginfo_t info = { \
.si_signo = signr, \
......@@ -73,7 +71,7 @@ int name(unsigned long cause, unsigned long address, struct pt_regs *regs) \
.si_code = sicode, \
.si_addr = (void __user *)address, \
}; \
return handle_exception(cause, str, regs, &info);\
return handle_exception(str, regs, &info);\
}
/*
......@@ -90,11 +88,11 @@ DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN)
/*
* Entry Point for Misaligned Data access Exception, for emulating in software
*/
int do_misaligned_access(unsigned long cause, unsigned long address,
struct pt_regs *regs, struct callee_regs *cregs)
int do_misaligned_access(unsigned long address, struct pt_regs *regs,
struct callee_regs *cregs)
{
if (misaligned_fixup(address, regs, cause, cregs) != 0)
return do_misaligned_error(cause, address, regs);
if (misaligned_fixup(address, regs, cregs) != 0)
return do_misaligned_error(address, regs);
return 0;
}
......@@ -104,10 +102,9 @@ int do_misaligned_access(unsigned long cause, unsigned long address,
* Entry point for miscll errors such as Nested Exceptions
* -Duplicate TLB entry is handled seperately though
*/
void do_machine_check_fault(unsigned long cause, unsigned long address,
struct pt_regs *regs)
void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
{
die("Machine Check Exception", regs, address, cause);
die("Machine Check Exception", regs, address);
}
......@@ -120,23 +117,22 @@ void do_machine_check_fault(unsigned long cause, unsigned long address,
* -1 used for software breakpointing (gdb)
* -2 used by kprobes
*/
void do_non_swi_trap(unsigned long cause, unsigned long address,
struct pt_regs *regs)
void do_non_swi_trap(unsigned long address, struct pt_regs *regs)
{
unsigned int param = cause & 0xff;
unsigned int param = regs->ecr_param;
switch (param) {
case 1:
trap_is_brkpt(cause, address, regs);
trap_is_brkpt(address, regs);
break;
case 2:
trap_is_kprobe(param, address, regs);
trap_is_kprobe(address, regs);
break;
case 3:
case 4:
kgdb_trap(regs, param);
kgdb_trap(regs);
break;
default:
......@@ -149,14 +145,14 @@ void do_non_swi_trap(unsigned long cause, unsigned long address,
* -For a corner case, ARC kprobes implementation resorts to using
* this exception, hence the check
*/
void do_insterror_or_kprobe(unsigned long cause,
unsigned long address,
struct pt_regs *regs)
void do_insterror_or_kprobe(unsigned long address, struct pt_regs *regs)
{
int rc;
/* Check if this exception is caused by kprobes */
if (notify_die(DIE_IERR, "kprobe_ierr", regs, address,
cause, SIGILL) == NOTIFY_STOP)
rc = notify_die(DIE_IERR, "kprobe_ierr", regs, address, 0, SIGILL);
if (rc == NOTIFY_STOP)
return;
insterror_is_error(cause, address, regs);
insterror_is_error(address, regs);
}
arch/arc/kernel/troubleshoot.c
View file @ 76d3f4c2
......@@ -117,23 +117,22 @@ static void show_faulting_vma(unsigned long address, char *buf)
static void show_ecr_verbose(struct pt_regs *regs)
{
unsigned int vec, cause_code, cause_reg;
unsigned int vec, cause_code;
unsigned long address;
cause_reg = current->thread.cause_code;
pr_info("\n[ECR ]: 0x%08x => ", cause_reg);
pr_info("\n[ECR ]: 0x%08lx => ", regs->event);
/* For Data fault, this is data address not instruction addr */
address = current->thread.fault_address;
vec = cause_reg >> 16;
cause_code = (cause_reg >> 8) & 0xFF;
vec = regs->ecr_vec;
cause_code = regs->ecr_cause;
/* For DTLB Miss or ProtV, display the memory involved too */
if (vec == ECR_V_DTLB_MISS) {
pr_cont("Invalid %s 0x%08lx by insn @ 0x%08lx\n",
(cause_code == 0x01) ? "Read From" :
((cause_code == 0x02) ? "Write to" : "EX"),
pr_cont("Invalid %s @ 0x%08lx by insn @ 0x%08lx\n",
(cause_code == 0x01) ? "Read" :
((cause_code == 0x02) ? "Write" : "EX"),
address, regs->ret);
} else if (vec == ECR_V_ITLB_MISS) {
pr_cont("Insn could not be fetched\n");
......@@ -144,14 +143,12 @@ static void show_ecr_verbose(struct pt_regs *regs)
} else if (vec == ECR_V_PROTV) {
if (cause_code == ECR_C_PROTV_INST_FETCH)
pr_cont("Execute from Non-exec Page\n");
else if (cause_code == ECR_C_PROTV_LOAD)
pr_cont("Read from Non-readable Page\n");
else if (cause_code == ECR_C_PROTV_STORE)
pr_cont("Write to Non-writable Page\n");
else if (cause_code == ECR_C_PROTV_XCHG)
pr_cont("Data exchange protection violation\n");
else if (cause_code == ECR_C_PROTV_MISALIG_DATA)
pr_cont("Misaligned r/w from 0x%08lx\n", address);
else
pr_cont("%s access not allowed on page\n",
(cause_code == 0x01) ? "Read" :
((cause_code == 0x02) ? "Write" : "EX"));
} else if (vec == ECR_V_INSN_ERR) {
pr_cont("Illegal Insn\n");
} else {
......@@ -176,7 +173,6 @@ void show_regs(struct pt_regs *regs)
print_task_path_n_nm(tsk, buf);
show_regs_print_info(KERN_INFO);
if (current->thread.cause_code)
show_ecr_verbose(regs);
pr_info("[EFA ]: 0x%08lx\n[BLINK ]: %pS\n[ERET ]: %pS\n",
......@@ -213,10 +209,9 @@ void show_regs(struct pt_regs *regs)
}
void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
unsigned long address, unsigned long cause_reg)
unsigned long address)
{
current->thread.fault_address = address;
current->thread.cause_code = cause_reg;
/* Caller and Callee regs */
show_regs(regs);
......
arch/arc/kernel/unaligned.c
View file @ 76d3f4c2
......@@ -187,7 +187,7 @@ fault: state->fault = 1;
* Returns 0 if successfully handled, 1 if some error happened
*/
int misaligned_fixup(unsigned long address, struct pt_regs *regs,
unsigned long cause, struct callee_regs *cregs)
struct callee_regs *cregs)
{
struct disasm_state state;
char buf[TASK_COMM_LEN];
......
arch/arc/kernel/unwind.c
View file @ 76d3f4c2
......@@ -289,6 +289,8 @@ static void __init setup_unwind_table(struct unwind_table *table,
* instead of the initial loc addr
* return;
*/
WARN(1, "unwinder: FDE->initial_location NULL %p\n",
(const u8 *)(fde + 1) + *fde);
}
++n;
}
......
arch/arc/kernel/vmlinux.lds.S
View file @ 76d3f4c2
......@@ -125,6 +125,11 @@ SECTIONS
*(.debug_frame)
__end_unwind = .;
}
/*
* gcc 4.8 generates this for -fasynchonous-unwind-tables,
* while we still use the .debug_frame based unwinder
*/
/DISCARD/ : { *(.eh_frame) }
#else
/DISCARD/ : { *(.debug_frame) }
#endif
......@@ -142,15 +147,18 @@ SECTIONS
*(.arcextmap.*)
}
#ifndef CONFIG_DEBUG_INFO
/* open-coded because we need .debug_frame seperately for unwinding */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_info 0 : { *(.debug_info) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/DISCARD/ : { *(.debug_aranges) }
/DISCARD/ : { *(.debug_pubnames) }
/DISCARD/ : { *(.debug_info) }
/DISCARD/ : { *(.debug_abbrev) }
/DISCARD/ : { *(.debug_line) }
/DISCARD/ : { *(.debug_str) }
/DISCARD/ : { *(.debug_loc) }
/DISCARD/ : { *(.debug_macinfo) }
/DISCARD/ : { *(.debug_ranges) }
#endif
#ifdef CONFIG_ARC_HAS_DCCM
. = CONFIG_ARC_DCCM_BASE;
......
arch/arc/mm/cache_arc700.c
View file @ 76d3f4c2
......@@ -73,6 +73,33 @@
#include <asm/cachectl.h>
#include <asm/setup.h>
/* Instruction cache related Auxiliary registers */
#define ARC_REG_IC_BCR 0x77 /* Build Config reg */
#define ARC_REG_IC_IVIC 0x10
#define ARC_REG_IC_CTRL 0x11
#define ARC_REG_IC_IVIL 0x19
#if (CONFIG_ARC_MMU_VER > 2)
#define ARC_REG_IC_PTAG 0x1E
#endif
/* Bit val in IC_CTRL */
#define IC_CTRL_CACHE_DISABLE 0x1
/* Data cache related Auxiliary registers */
#define ARC_REG_DC_BCR 0x72 /* Build Config reg */
#define ARC_REG_DC_IVDC 0x47
#define ARC_REG_DC_CTRL 0x48
#define ARC_REG_DC_IVDL 0x4A
#define ARC_REG_DC_FLSH 0x4B
#define ARC_REG_DC_FLDL 0x4C
#if (CONFIG_ARC_MMU_VER > 2)
#define ARC_REG_DC_PTAG 0x5C
#endif
/* Bit val in DC_CTRL */
#define DC_CTRL_INV_MODE_FLUSH 0x40
#define DC_CTRL_FLUSH_STATUS 0x100
char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
{
int n = 0;
......@@ -89,8 +116,10 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
enb ? "" : "DISABLED (kernel-build)"); \
}
PR_CACHE(&cpuinfo_arc700[c].icache, __CONFIG_ARC_HAS_ICACHE, "I-Cache");
PR_CACHE(&cpuinfo_arc700[c].dcache, __CONFIG_ARC_HAS_DCACHE, "D-Cache");
PR_CACHE(&cpuinfo_arc700[c].icache, IS_ENABLED(CONFIG_ARC_HAS_ICACHE),
"I-Cache");
PR_CACHE(&cpuinfo_arc700[c].dcache, IS_ENABLED(CONFIG_ARC_HAS_DCACHE),
"D-Cache");
return buf;
}
......@@ -100,17 +129,23 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
* the cpuinfo structure for later use.
* No Validation done here, simply read/convert the BCRs
*/
void __cpuinit read_decode_cache_bcr(void)
void read_decode_cache_bcr(void)
{
struct bcr_cache ibcr, dbcr;
struct cpuinfo_arc_cache *p_ic, *p_dc;
unsigned int cpu = smp_processor_id();
struct bcr_cache {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
#else
unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
#endif
} ibcr, dbcr;
p_ic = &cpuinfo_arc700[cpu].icache;
READ_BCR(ARC_REG_IC_BCR, ibcr);
if (ibcr.config == 0x3)
p_ic->assoc = 2;
BUG_ON(ibcr.config != 3);
p_ic->assoc = 2; /* Fixed to 2w set assoc */
p_ic->line_len = 8 << ibcr.line_len;
p_ic->sz = 0x200 << ibcr.sz;
p_ic->ver = ibcr.ver;
......@@ -118,8 +153,8 @@ void __cpuinit read_decode_cache_bcr(void)
p_dc = &cpuinfo_arc700[cpu].dcache;
READ_BCR(ARC_REG_DC_BCR, dbcr);
if (dbcr.config == 0x2)
p_dc->assoc = 4;
BUG_ON(dbcr.config != 2);
p_dc->assoc = 4; /* Fixed to 4w set assoc */
p_dc->line_len = 16 << dbcr.line_len;
p_dc->sz = 0x200 << dbcr.sz;
p_dc->ver = dbcr.ver;
......@@ -132,14 +167,12 @@ void __cpuinit read_decode_cache_bcr(void)
* 3. Enable the Caches, setup default flush mode for D-Cache
* 3. Calculate the SHMLBA used by user space
*/
void __cpuinit arc_cache_init(void)
void arc_cache_init(void)
{
unsigned int temp;
unsigned int cpu = smp_processor_id();
struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
int way_pg_ratio = way_pg_ratio;
int dcache_does_alias;
unsigned int dcache_does_alias, temp;
char str[256];
printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
......@@ -149,20 +182,11 @@ void __cpuinit arc_cache_init(void)
#ifdef CONFIG_ARC_HAS_ICACHE
/* 1. Confirm some of I-cache params which Linux assumes */
if ((ic->assoc != ARC_ICACHE_WAYS) ||
(ic->line_len != ARC_ICACHE_LINE_LEN)) {
if (ic->line_len != ARC_ICACHE_LINE_LEN)
panic("Cache H/W doesn't match kernel Config");
}
#if (CONFIG_ARC_MMU_VER > 2)
if (ic->ver != 3) {
if (running_on_hw)
panic("Cache ver doesn't match MMU ver\n");
/* For ISS - suggest the toggles to use */
pr_err("Use -prop=icache_version=3,-prop=dcache_version=3\n");
}
#endif
if (ic->ver != CONFIG_ARC_MMU_VER)
panic("Cache ver doesn't match MMU ver\n");
#endif
/* Enable/disable I-Cache */
......@@ -181,14 +205,12 @@ void __cpuinit arc_cache_init(void)
return;
#ifdef CONFIG_ARC_HAS_DCACHE
if ((dc->assoc != ARC_DCACHE_WAYS) ||
(dc->line_len != ARC_DCACHE_LINE_LEN)) {
if (dc->line_len != ARC_DCACHE_LINE_LEN)
panic("Cache H/W doesn't match kernel Config");
}
dcache_does_alias = (dc->sz / ARC_DCACHE_WAYS) > PAGE_SIZE;
/* check for D-Cache aliasing */
dcache_does_alias = (dc->sz / dc->assoc) > PAGE_SIZE;
if (dcache_does_alias && !cache_is_vipt_aliasing())
panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
else if (!dcache_does_alias && cache_is_vipt_aliasing())
......@@ -239,11 +261,9 @@ static inline void wait_for_flush(void)
*/
static inline void __dc_entire_op(const int cacheop)
{
unsigned long flags, tmp = tmp;
unsigned int tmp = tmp;
int aux;
local_irq_save(flags);
if (cacheop == OP_FLUSH_N_INV) {
/* Dcache provides 2 cmd: FLUSH or INV
* INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
......@@ -267,8 +287,6 @@ static inline void __dc_entire_op(const int cacheop)
/* Switch back the DISCARD ONLY Invalidate mode */
if (cacheop == OP_FLUSH_N_INV)
write_aux_reg(ARC_REG_DC_CTRL, tmp & ~DC_CTRL_INV_MODE_FLUSH);
local_irq_restore(flags);
}
/*
......@@ -459,8 +477,15 @@ static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
local_irq_restore(flags);
}
static inline void __ic_entire_inv(void)
{
write_aux_reg(ARC_REG_IC_IVIC, 1);
read_aux_reg(ARC_REG_IC_CTRL); /* blocks */
}
#else
#define __ic_entire_inv()
#define __ic_line_inv_vaddr(pstart, vstart, sz)
#endif /* CONFIG_ARC_HAS_ICACHE */
......@@ -487,7 +512,7 @@ void flush_dcache_page(struct page *page)
struct address_space *mapping;
if (!cache_is_vipt_aliasing()) {
set_bit(PG_arch_1, &page->flags);
clear_bit(PG_dc_clean, &page->flags);
return;
}
......@@ -501,7 +526,7 @@ void flush_dcache_page(struct page *page)
* Make a note that K-mapping is dirty
*/
if (!mapping_mapped(mapping)) {
set_bit(PG_arch_1, &page->flags);
clear_bit(PG_dc_clean, &page->flags);
} else if (page_mapped(page)) {
/* kernel reading from page with U-mapping */
......@@ -629,26 +654,13 @@ void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr)
__dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
}
void flush_icache_all(void)
{
unsigned long flags;
local_irq_save(flags);
write_aux_reg(ARC_REG_IC_IVIC, 1);
/* lr will not complete till the icache inv operation is not over */
read_aux_reg(ARC_REG_IC_CTRL);
local_irq_restore(flags);
}
noinline void flush_cache_all(void)
{
unsigned long flags;
local_irq_save(flags);
flush_icache_all();
__ic_entire_inv();
__dc_entire_op(OP_FLUSH_N_INV);
local_irq_restore(flags);
......@@ -667,7 +679,12 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
{
unsigned int paddr = pfn << PAGE_SHIFT;
__sync_icache_dcache(paddr, u_vaddr, PAGE_SIZE);
u_vaddr &= PAGE_MASK;
___flush_dcache_page(paddr, u_vaddr);
if (vma->vm_flags & VM_EXEC)
__inv_icache_page(paddr, u_vaddr);
}
void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
......@@ -717,7 +734,7 @@ void copy_user_highpage(struct page *to, struct page *from,
* non copied user pages (e.g. read faults which wire in pagecache page
* directly).
*/
set_bit(PG_arch_1, &to->flags);
clear_bit(PG_dc_clean, &to->flags);
/*
* if SRC was already usermapped and non-congruent to kernel mapping
......@@ -725,15 +742,16 @@ void copy_user_highpage(struct page *to, struct page *from,
*/
if (clean_src_k_mappings) {
__flush_dcache_page(kfrom, kfrom);
set_bit(PG_dc_clean, &from->flags);
} else {
set_bit(PG_arch_1, &from->flags);
clear_bit(PG_dc_clean, &from->flags);
}
}
void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
{
clear_page(to);
set_bit(PG_arch_1, &page->flags);
clear_bit(PG_dc_clean, &page->flags);
}
......
arch/arc/mm/fault.c
View file @ 76d3f4c2
......@@ -15,6 +15,7 @@
#include <linux/uaccess.h>
#include <linux/kdebug.h>
#include <asm/pgalloc.h>
#include <asm/mmu.h>
static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address)
{
......@@ -51,14 +52,14 @@ static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address)
return 1;
}
void do_page_fault(struct pt_regs *regs, int write, unsigned long address,
unsigned long cause_code)
void do_page_fault(struct pt_regs *regs, unsigned long address)
{
struct vm_area_struct *vma = NULL;
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
siginfo_t info;
int fault, ret;
int write = regs->ecr_cause & ECR_C_PROTV_STORE; /* ST/EX */
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
(write ? FAULT_FLAG_WRITE : 0);
......@@ -109,7 +110,8 @@ void do_page_fault(struct pt_regs *regs, int write, unsigned long address,
/* Handle protection violation, execute on heap or stack */
if (cause_code == ((ECR_V_PROTV << 16) | ECR_C_PROTV_INST_FETCH))
if ((regs->ecr_vec == ECR_V_PROTV) &&
(regs->ecr_cause == ECR_C_PROTV_INST_FETCH))
goto bad_area;
if (write) {
......@@ -176,7 +178,6 @@ void do_page_fault(struct pt_regs *regs, int write, unsigned long address,
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
tsk->thread.fault_address = address;
tsk->thread.cause_code = cause_code;
info.si_signo = SIGSEGV;
info.si_errno = 0;
/* info.si_code has been set above */
......@@ -197,7 +198,7 @@ void do_page_fault(struct pt_regs *regs, int write, unsigned long address,
if (fixup_exception(regs))
return;
die("Oops", regs, address, cause_code);
die("Oops", regs, address);
out_of_memory:
if (is_global_init(tsk)) {
......@@ -218,7 +219,6 @@ void do_page_fault(struct pt_regs *regs, int write, unsigned long address,
goto no_context;
tsk->thread.fault_address = address;
tsk->thread.cause_code = cause_code;
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_ADRERR;
......
arch/arc/mm/tlb.c
View file @ 76d3f4c2
......@@ -55,7 +55,7 @@
#include <asm/arcregs.h>
#include <asm/setup.h>
#include <asm/mmu_context.h>
#include <asm/tlb.h>
#include <asm/mmu.h>
/* Need for ARC MMU v2
*
......@@ -97,6 +97,7 @@
* J-TLB entry got evicted/replaced.
*/
/* A copy of the ASID from the PID reg is kept in asid_cache */
int asid_cache = FIRST_ASID;
......@@ -432,9 +433,14 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
{
unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
unsigned long paddr = pte_val(*ptep) & PAGE_MASK;
struct page *page = pfn_to_page(pte_pfn(*ptep));
create_tlb(vma, vaddr, ptep);
if (page == ZERO_PAGE(0)) {
return;
}
/*
* Exec page : Independent of aliasing/page-color considerations,
* since icache doesn't snoop dcache on ARC, any dirty
......@@ -446,9 +452,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
*/
if ((vma->vm_flags & VM_EXEC) ||
addr_not_cache_congruent(paddr, vaddr)) {
struct page *page = pfn_to_page(pte_pfn(*ptep));
int dirty = test_and_clear_bit(PG_arch_1, &page->flags);
int dirty = !test_and_set_bit(PG_dc_clean, &page->flags);
if (dirty) {
/* wback + inv dcache lines */
__flush_dcache_page(paddr, paddr);
......@@ -464,12 +469,27 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
* the cpuinfo structure for later use.
* No Validation is done here, simply read/convert the BCRs
*/
void __cpuinit read_decode_mmu_bcr(void)
void read_decode_mmu_bcr(void)
{
unsigned int tmp;
struct bcr_mmu_1_2 *mmu2; /* encoded MMU2 attr */
struct bcr_mmu_3 *mmu3; /* encoded MMU3 attr */
struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
unsigned int tmp;
struct bcr_mmu_1_2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
#else
unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
#endif
} *mmu2;
struct bcr_mmu_3 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4,
u_itlb:4, u_dtlb:4;
#else
unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4,
ways:4, ver:8;
#endif
} *mmu3;
tmp = read_aux_reg(ARC_REG_MMU_BCR);
mmu->ver = (tmp >> 24);
......@@ -505,12 +525,12 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
"J-TLB %d (%dx%d), uDTLB %d, uITLB %d, %s\n",
p_mmu->num_tlb, p_mmu->sets, p_mmu->ways,
p_mmu->u_dtlb, p_mmu->u_itlb,
__CONFIG_ARC_MMU_SASID_VAL ? "SASID" : "");
IS_ENABLED(CONFIG_ARC_MMU_SASID) ? "SASID" : "");
return buf;
}
void __cpuinit arc_mmu_init(void)
void arc_mmu_init(void)
{
char str[256];
struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
......
arch/arc/mm/tlbex.S
View file @ 76d3f4c2
......@@ -39,7 +39,7 @@
#include <linux/linkage.h>
#include <asm/entry.h>
#include <asm/tlb.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/arcregs.h>
#include <asm/cache.h>
......@@ -147,9 +147,9 @@ ex_saved_reg1:
#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
and.f 0, r0, _PAGE_PRESENT
bz 1f
ld r2, [num_pte_not_present]
add r2, r2, 1
st r2, [num_pte_not_present]
ld r3, [num_pte_not_present]
add r3, r3, 1
st r3, [num_pte_not_present]
1:
#endif
......@@ -271,21 +271,21 @@ ARC_ENTRY EV_TLBMissI
#endif
;----------------------------------------------------------------
; Get the PTE corresponding to V-addr accessed
; Get the PTE corresponding to V-addr accessed, r2 is setup with EFA
LOAD_FAULT_PTE
;----------------------------------------------------------------
; VERIFY_PTE: Check if PTE permissions approp for executing code
cmp_s r2, VMALLOC_START
mov.lo r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE)
mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE)
mov.lo r2, (_PAGE_PRESENT | _PAGE_U_EXECUTE)
mov.hs r2, (_PAGE_PRESENT | _PAGE_K_EXECUTE)
and r3, r0, r2 ; Mask out NON Flag bits from PTE
xor.f r3, r3, r2 ; check ( ( pte & flags_test ) == flags_test )
bnz do_slow_path_pf
; Let Linux VM know that the page was accessed
or r0, r0, (_PAGE_PRESENT | _PAGE_ACCESSED) ; set Accessed Bit
or r0, r0, _PAGE_ACCESSED ; set Accessed Bit
st_s r0, [r1] ; Write back PTE
CONV_PTE_TO_TLB
......@@ -311,7 +311,7 @@ ARC_ENTRY EV_TLBMissD
;----------------------------------------------------------------
; Get the PTE corresponding to V-addr accessed
; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE
; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE, r2 = EFA
LOAD_FAULT_PTE
;----------------------------------------------------------------
......@@ -345,7 +345,7 @@ ARC_ENTRY EV_TLBMissD
;----------------------------------------------------------------
; UPDATE_PTE: Let Linux VM know that page was accessed/dirty
lr r3, [ecr]
or r0, r0, (_PAGE_PRESENT | _PAGE_ACCESSED) ; Accessed bit always
or r0, r0, _PAGE_ACCESSED ; Accessed bit always
btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; See if it was a Write Access ?
or.nz r0, r0, _PAGE_MODIFIED ; if Write, set Dirty bit as well
st_s r0, [r1] ; Write back PTE
......@@ -381,18 +381,7 @@ do_slow_path_pf:
; ------- setup args for Linux Page fault Hanlder ---------
mov_s r0, sp
lr r2, [efa]
lr r3, [ecr]
; Both st and ex imply WRITE access of some sort, hence do_page_fault( )
; invoked with write=1 for DTLB-st/ex Miss and write=0 for ITLB miss or
; DTLB-ld Miss
; DTLB Miss Cause code is ld = 0x01 , st = 0x02, ex = 0x03
; Following code uses that fact that st/ex have one bit in common
btst_s r3, ECR_C_BIT_DTLB_ST_MISS
mov.z r1, 0
mov.nz r1, 1
lr r1, [efa]
; We don't want exceptions to be disabled while the fault is handled.
; Now that we have saved the context we return from exception hence
......
arch/arc/plat-arcfpga/platform.c
View file @ 76d3f4c2
......@@ -77,6 +77,7 @@ static void __init setup_bvci_lat_unit(void)
/*----------------------- Platform Devices -----------------------------*/
#if IS_ENABLED(CONFIG_SERIAL_ARC)
static unsigned long arc_uart_info[] = {
0, /* uart->is_emulated (runtime @running_on_hw) */
0, /* uart->port.uartclk */
......@@ -115,7 +116,7 @@ static struct platform_device arc_uart0_dev = {
static struct platform_device *fpga_early_devs[] __initdata = {
&arc_uart0_dev,
};
#endif
#endif /* CONFIG_SERIAL_ARC_CONSOLE */
static void arc_fpga_serial_init(void)
{
......@@ -152,8 +153,13 @@ static void arc_fpga_serial_init(void)
* otherwise the early console never gets a chance to run.
*/
add_preferred_console("ttyARC", 0, "115200");
#endif
#endif /* CONFIG_SERIAL_ARC_CONSOLE */
}
#else /* !IS_ENABLED(CONFIG_SERIAL_ARC) */
static void arc_fpga_serial_init(void)
{
}
#endif
static void __init plat_fpga_early_init(void)
{
......@@ -169,7 +175,7 @@ static void __init plat_fpga_early_init(void)
}
static struct of_dev_auxdata plat_auxdata_lookup[] __initdata = {
#if defined(CONFIG_SERIAL_ARC) || defined(CONFIG_SERIAL_ARC_MODULE)
#if IS_ENABLED(CONFIG_SERIAL_ARC)
OF_DEV_AUXDATA("snps,arc-uart", UART0_BASE, "arc-uart", arc_uart_info),
#endif
{}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7