drm/i915/skl: Adjust the display engine interrupts

To accomodate the extra planes, the bit definitions were shuffled around
a bit.

v2: Rebase on top of the for_each_pipe() change adding dev_priv as first
    argument.
v3: Rebase after yet another change int that area (done with wiggle)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_irq.c

@@ -2587,7 +2587,7 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 	}
 
 	for_each_pipe(dev_priv, pipe) {
-		uint32_t pipe_iir;
+		uint32_t pipe_iir, flip_done = 0, fault_errors = 0;
 
 		if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe)))
 			continue;
@@ -2596,11 +2596,17 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 		if (pipe_iir) {
 			ret = IRQ_HANDLED;
 			I915_WRITE(GEN8_DE_PIPE_IIR(pipe), pipe_iir);
+
 			if (pipe_iir & GEN8_PIPE_VBLANK &&
 			    intel_pipe_handle_vblank(dev, pipe))
 				intel_check_page_flip(dev, pipe);
 
-			if (pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE) {
+			if (IS_GEN9(dev))
+				flip_done = pipe_iir & GEN9_PIPE_PLANE1_FLIP_DONE;
+			else
+				flip_done = pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE;
+
+			if (flip_done) {
 				intel_prepare_page_flip(dev, pipe);
 				intel_finish_page_flip_plane(dev, pipe);
 			}
@@ -2615,11 +2621,16 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 						  pipe_name(pipe));
 			}
 
-			if (pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS) {
+
+			if (IS_GEN9(dev))
+				fault_errors = pipe_iir & GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
+			else
+				fault_errors = pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
+
+			if (fault_errors)
 				DRM_ERROR("Fault errors on pipe %c\n: 0x%08x",
 					  pipe_name(pipe),
 					  pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS);
-			}
 		} else
 			DRM_ERROR("The master control interrupt lied (DE PIPE)!\n");
 	}
@@ -3803,12 +3814,20 @@ static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv)
 
 static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 {
-	uint32_t de_pipe_masked = GEN8_PIPE_PRIMARY_FLIP_DONE |
-		GEN8_PIPE_CDCLK_CRC_DONE |
+	uint32_t de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE;
+	uint32_t de_pipe_enables;
+	int pipe;
+
+	if (IS_GEN9(dev_priv))
+		de_pipe_masked |= GEN9_PIPE_PLANE1_FLIP_DONE |
+				  GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
+	else
+		de_pipe_masked |= GEN8_PIPE_PRIMARY_FLIP_DONE |
 				  GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
-	uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
+
+	de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
 					   GEN8_PIPE_FIFO_UNDERRUN;
-	int pipe;
+
 	dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked;
 	dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;
 	dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked;

drivers/gpu/drm/i915/i915_reg.h

@@ -4844,10 +4844,23 @@ enum punit_power_well {
 #define  GEN8_PIPE_SCAN_LINE_EVENT	(1 << 2)
 #define  GEN8_PIPE_VSYNC		(1 << 1)
 #define  GEN8_PIPE_VBLANK		(1 << 0)
+#define  GEN9_PIPE_CURSOR_FAULT		(1 << 11)
+#define  GEN9_PIPE_PLANE3_FAULT		(1 << 9)
+#define  GEN9_PIPE_PLANE2_FAULT		(1 << 8)
+#define  GEN9_PIPE_PLANE1_FAULT		(1 << 7)
+#define  GEN9_PIPE_PLANE3_FLIP_DONE	(1 << 5)
+#define  GEN9_PIPE_PLANE2_FLIP_DONE	(1 << 4)
+#define  GEN9_PIPE_PLANE1_FLIP_DONE	(1 << 3)
+#define  GEN9_PIPE_PLANE_FLIP_DONE(p)	(1 << (3 + p))
 #define GEN8_DE_PIPE_IRQ_FAULT_ERRORS \
 	(GEN8_PIPE_CURSOR_FAULT | \
 	 GEN8_PIPE_SPRITE_FAULT | \
 	 GEN8_PIPE_PRIMARY_FAULT)
+#define GEN9_DE_PIPE_IRQ_FAULT_ERRORS \
+	(GEN9_PIPE_CURSOR_FAULT | \
+	 GEN9_PIPE_PLANE3_FAULT | \
+	 GEN9_PIPE_PLANE2_FAULT | \
+	 GEN9_PIPE_PLANE1_FAULT)
 
 #define GEN8_DE_PORT_ISR 0x44440
 #define GEN8_DE_PORT_IMR 0x44444